Search

Acid mine drainage (AMD) is a global environmental issue. Conventionally, a number of active and passive remediation approaches are applied to treat and manage AMD. Case studies on remediation approaches applied in actual mining sites such as lime neutralization, bioremediation, wetlands and permeable reactive barriers provide an outlook on actual long-term implications of AMD remediation. Hence, in spite of available remediation approaches, AMD treatment remains a challenge. The need for sustainable AMD treatment approaches has led to much focus on water reuse and resource recovery. This review underscores (i) characteristics and implication of AMD, (ii) remediation approaches in mining sites, (iii) alternative treatment technologies for water reuse, and (iv) resource recovery. Specifically, the role of membrane processes and alternative treatment technologies to produce water for reuse from AMD is highlighted. Although membrane processes are favorable for water reuse, they cannot achieve resource recovery, specifically selective valuable metal recovery. The approach of integrated membrane and conventional treatment processes are especially promising for attaining both water reuse and recovery of resources such as sulfuric acid, metals and rare earth elements. Overall, this review provides insights in establishing reuse and resource recovery as the holistic approach towards sustainable AMD treatment. Finally, integrated technologies that deserve in depth future exploration is highlighted., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Coal mine methane (CMM) is not only a hazardous greenhouse gas but is also a wasted energy resource, if not utilised. This paper evaluates a novel adsorbent material developed for capturing methane from ventilation air methane (VAM) gas in underground coal mines. The adsorbent material is a honeycomb monolithic carbon fibre composite (HMCFC) consisting of multiple parallel flow-through channels and the material exhibits unique features including low pressure drop, good mechanical properties, ability to handle dust-containing gas streams, good thermal and electrical conductivity and selective adsorption of gases. During this study, a series of HMCFC adsorbents (using different types of carbon fibres) were successfully fabricated. Experimental data demonstrated the proof-of-concept of using the HMCFC adsorbent to capture methane from VAM gas. The adsorption capacity of the HMCFC adsorbent was twice that of commercial activated carbon. Methane concentration of 0.56% in the inlet VAM gas stream is reduced to about 0.011% after it passes through the novel carbon fibre composite adsorbent material at ambient temperature and atmospheric pressure. This amounts to a maximum capture efficiency of 98%. These encouraging laboratory scale studies have prompted further large scale trials and economic assessment.

Terephthalic acid (TPA) is widely applied as a raw material in making polyester fiber, polyethylene terephthalate (PET) bottles, polyester films, etc. TPA is toxic and is known to act as endocrine disruptor. TPA wastewater is traditionally treated by biological process and this study aims to evaluate the effectiveness of several advanced oxidation processes on TPA removal. The oxidation processes studied were: UV-TiO(2), UV-H(2)O(2), UV-H(2)O(2)-Fe, O(3), O(3)/Fe, O(3)/TiO(2), UV-O(3)-H(2)O(2)-Fe and UV-O(3)-H(2)O(2)-Fe-TiO(2). The results indicate that the time required for the complete destruction of 50 ppm of TPA can be minimized from 10h using UV-TiO(2) system, to less than 10 min by UV-H(2)O(2)-Fe-O(3) system. Some of the likely organic intermediates identified during TPA destruction include, benzoquinone, benzene, maleic acid and oxalic acid. Possible destruction pathway of TPA has been proposed. TPA degradation by various systems was also analyzed based on the reaction kinetics and operating costs.

Even the presence of very low concentrations of dyes (1mgL(-1)) in the effluent is highly visible and is considered aesthetically undesirable. It must be removed from wastewater completely. This study systematically evaluates the performance of adsorption (three kinds of powdered activated carbons), coagulation (AlCl3.6H2O) and membrane (submerged hollow fiber microfiltration) processes individually in treating two kinds of reactive dyes (Orange 16 and Black 5) and then using a hybrid process with combined coagulation-adsorption-membrane treatment system. Adsorption capacity and kinetics of Orange 16 were much higher and faster than those of Black 5. The dye removal efficiency by coagulation was highly dependent on dye concentration and solution pH. The hybrid process performance was far more superior that individual process in removing both kinds of dyes. It was evident that the combined coagulation-adsorption-membrane process has a great potential application for complete reactive dye removal, production of high-quality treated water and allows the reduction in the use of coagulant and adsorbent.

Terephthalic acid (TPA) wastewater is traditionally being treated by biological method. This study investigates the degradation of three major toxic target organic species, namely terephthalic acid (TPA), isophthalic acid (IPA), benzoic acid (BA), present in the TPA wastewater, by several advanced oxidation processes. The performance of three main oxidation processes such as photofenton oxidation (UV-H(2)O(2)-Fe), photocatalytic ozonation (UV-O(3)-Fe) and photofenton ozonation (UV-O(3)-H(2)O(2)-Fe) were studied. Studies were conducted with and without dilution of TPA wastewater. Photofenton ozonation was found to be most efficient by achieving almost complete destruction of all the three target organics in less than 30 minutes of reaction. In combining several oxidation processes, a comparative study was also carried out between one step addition of oxidants and stepwise addition.

This study evaluates the adsorption ability of bisphenol A (BPA) on titanium dioxide (TiO2) and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor (capacity 0.16 m3) was studied using submerged ultrafiltration (UF) membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency of photocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.