Search

Prebiotics are non-digestible compounds that promote intestinal microbiota growth and/or activity. Xylooligosaccharides (XOS) are new prebiotics derived from the hemicellulose fraction of lignocellulosic materials. Challenges in using those materials as sources for prebiotic compounds lie in the hemicellulose extraction efficiency and the safety of those ingredients. In this sense, this work aims to optimize hemicellulose extraction and XOS production through direct enzymatic hydrolysis of alkali pre-treated wheat straw without undesired byproducts. By increasing the temperature of the enzymatic step from 40 °C to 65 °C we achieved an improvement in the extraction yield from 55 % to 80 %. Products with different degrees of polymerization were also noticed: while XOS ≤ X 6 where the main products at 40 °C, a mixture of long arabinoxylan derived polymers (ADPo) and XOS ≤ X 6 was obtained at 65 °C, irrespective of the extraction yield. Thus, a modulatory effect of temperature on the product profile is suggested here. Among the XOS ≤ X 6 produced, X 2 -X 3 were the main products, and X 4 was the minor one. At the end of the hydrolysis, 146.7 mg XOS per gram of pre-treated wheat straw were obtained., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Several fungal species produce diverse carbohydrate-active enzymes useful for the xylooligosaccharide biorefinery. These enzymes can be isolated by different purification methods, but fungi usually produce other several compounds which interfere in the purification process. So, the present work has three interconnected aims: (i) compare β-xylosidase production by Fusarium pernambucanum MUM 18.62 with other crop pathogens; (ii) optimise F. pernambucanum xylanolytic enzymes expression focusing on the pre-inoculum media composition; and (iii) design a downstream strategy to eliminate interfering substances and sequentially isolate β-xylosidases, arabinofuranosidases and endo-xylanases from the extracellular media. F. pernambucanum showed the highest β-xylosidase activity among all the evaluated species. It also produced endo-xylanase and arabinofuranosidase. The growth and β-xylosidase expression were not influenced by the pre-inoculum source, contrary to endo-xylanase activity, which was higher with xylan-enriched agar. Using a sequential strategy involving ammonium sulfate precipitation of the extracellular interferences, and several chromatographic steps of the supernatant (hydrophobic chromatography, size exclusion chromatography, and anion exchange chromatography), we were able to isolate different enzyme pools: four partially purified β-xylosidase/arabinofuranoside; FpXylEAB trifunctional GH10 endo-xylanase/β-xylosidase/arabinofuranoside enzyme (39.8 kDa) and FpXynE GH11 endo-xylanase with molecular mass (18.0 kDa). FpXylEAB and FpXynE enzymes were highly active at pH 5-6 and 60-50 °C., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The food sector continues to face challenges in developing techniques to increase the bioavailability of bioactive chemicals. Utilising microstructures capable of encapsulating diverse compounds has been proposed as a technological solution for their transport both in food and into the gastrointestinal tract. The present review discusses the primary elements that influence the emulsification process in microfluidic systems to form different microstructures for food applications. In microfluidic systems, reactions occur within small reaction channels (1-1000 μm), using small amounts of samples and reactants, ca. 102-103 times less than conventional assays. This geometry provides several advantages for emulsion and encapsulating structure production, like less waste generation, lower cost and gentle assays. Also, from a food application perspective, it allows the decrease in particle dispersion, resulting in a highly repeatable and efficient synthesis method that also improves the palatability of the food products into which the encapsulates are incorporated. However, it also entails some particular requirements. It is important to obtain a low Reynolds number (Re < approx. 250) for greater precision in droplet formation. Also, microfluidics requires fluid viscosity typically between 0.3 and 1400 mPa s at 20 °C. So, it is a challenge to find food-grade fluids that can operate at the micro-scale of these systems. Microfluidic systems can be used to synthesise different food-grade microstructures: microemulsions, solid lipid microparticles, microgels, or self-assembled structures like liposomes, niosomes, or polymersomes. Besides, microfluidics is particularly useful for accurately encapsulating bacterial cells to control their delivery and release on the action site. However, despite the significant advancement in these systems' development over the past several years, developing and implementing these systems on an industrial scale remains challenging for the food industry., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

A scale-up process was carried out to obtain potent bioactive peptides from whey protein through a simple hydrolysis process. The scale-up was satisfactory, with results similar to those obtained at lab scale: a fraction of peptides < 1 kDa with ACE inhibitory activity of 18.44 ± 2.47 μg/mL, a DPPH value of 69.40 ± 0.44%, and an ORAC value of 3.37 ± 0.03 μmol TE/mg protein. The peptide sequences responsible for the ACE inhibitory activity were also similar to those identified at lab scale: PM, LL, LF, HFKG and PT. The hydrolysate was used as a functional ingredient in a low-fat yoghurt. The consumer sensory taste panel found no significant difference (p > 0.05) between the bitterness of the control and the functional yoghurt, and about 50% of consumers would buy it. The hydrolysate maintained its bioactivities for 4 months at -20 °C (after thawing and pasteurisation), and for 1 week in yoghurt at 4 °C., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The thermoalkalophilic membrane-associated esterase E34Tt from Thermus thermophilus HB27 was cloned and expressed in Kluyveromyces lactis (KLEST-3S esterase). The recombinant enzyme was tested as a biocatalyst in aqueous and organic media. It displayed a high thermal stability and was active in the presence of 10% ( v / v ) organic solvents and 1% ( w / v ) detergents. KLEST-3S hydrolysed triglycerides of various acyl chains, which is a rare characteristic among carboxylic ester hydrolases from extreme thermophiles, with maximum activity on tributyrin. It also displayed interfacial activation towards triacetin. KLEST-3S was also tested as a biocatalyst in organic media. The esterase provided high yields for the acetylation of alcohols. In addition, KLEST-3S catalyzed the stereoselective hydrolysis of ( R , S )-ibuprofen methyl ester (87% ee). Our results indicate that KLEST-3S may be a robust and efficient biocatalyst for application in industrial bioconversions.

Bovine whey protein was hydrolysed using cardosins A and B purified from dried flowers of Cynara cardunculus by combining diafiltration, anion-exchange chromatography and ultrafiltration. The proteolysis experiments were performed using different whey protein concentrations and enzyme/substrate (E/S) ratios. Complete hydrolysis of the main whey proteins, β-Lactoglobulin (β-Lg) and α-lactalbumin (α-La), was achieved after 4 h, at E/S ratios of 1/150 U/mg, regardless the initial protein concentration. In previous reports, the authors suggested that cardosins could not hydrolyse β-lactoblogulin. However, our promising results open up new possibilities to further explore the action of cardosins on whey proteins for the production of bioactive peptides., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A novel esterase, EstD11, has been discovered in a hot spring metagenomic library. It is a thermophilic and thermostable esterase with an optimum temperature of 60°C. A detailed substrate preference analysis of EstD11 was done using a library of chromogenic ester substrate that revealed the broad substrate specificity of EstD11 with significant measurable activity against 16 substrates with varied chain length, steric hindrance, aromaticity and flexibility of the linker between the carboxyl and the alcohol moiety of the ester. The tridimensional structures of EstD11 and the inactive mutant have been determined at atomic resolutions. Structural and bioinformatic analysis, confirm that EstD11 belongs to the family IV, the hormone-sensitive lipase (HSL) family, from the α/β-hydrolase superfamily. The canonical α/β-hydrolase domain is completed by a cap domain, composed by two subdomains that can unmask of the active site to allow the substrate to enter. Eight crystallographic complexes were solved with different substrates and reaction products that allowed identification of the hot-spots in the active site underlying the specificity of the protein. Crystallization and/or incubation of EstD11 at high temperature provided unique information on cap dynamics and a first glimpse of enzymatic activity in vivo . Very interestingly, we have discovered a unique Met zipper lining the active site and the cap domains that could be essential in pivotal aspects as thermo-stability and substrate promiscuity in EstD11., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2021 The Authors.)

Okara oil is a by-product remaining from defatting okara, the solid residue generated after extracting the aqueous fraction of grounded soybeans in the elaboration of soy beverages. The goal of this work was to encapsulate the probiotic Lactobacillus plantarum CIDCA 83114 into W/O emulsions composed of a block-copolymer constituted of pluronic® and acrylic acid (PPP12) and okara oil, prepared in microfluidic devices. For comparative purposes, alginate was also included as a second dispersed phase. Lactobacillus plantarum CIDCA 83114 was suspended in PPP12 or alginate giving rise to dispersed phases with different compositions, named I, II, III and IV. Controls were prepared by suspending microorganisms in water as dispersed phase. 6-carboxyfluorescein was added as bacterial marker in all the emulsions. The presence of green dyed bacteria in the dispersed phases, inside the droplets of the emulsions and the absence of fluorescence outside them, confirmed the complete encapsulation of bacteria in the dispersed phases. After being prepared, emulsions were freeze-dried. The exposure to gastric conditions did not lead to significant differences among the emulsions containing polymers. However, in all cases bacterial counts were significantly lower than those of the control. After exposing emulsions to the simulated intestinal environment, bacterial counts in assays I, II and III (emulsions composed of only one dispersed phase or of two dispersed phases with bacteria resuspended in the PPP12 one) were significantly greater than those of the control (p < 0.05) and no detectable microorganisms were observed for assay IV (emulsions composed of two dispersed phases with bacteria resuspended in the alginate one). In particular, bacterial cultivability in emulsions corresponding to assay I (only PPP12 as dispersed phase) exposed to the intestinal environment was 8.22 ± 0.02 log CFU/mL (2 log CFU higher than the values obtained after gastric digestion). These results support the role of PPP12 as an adequate co-polymer to protect probiotics from the gastric environment, enabling their release in the gut, with great potential for food or nutraceutical applications., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The development of protocols for efficient gluten elimination is one of the most critical aspects of any allergen management strategy in the industry. The suitability of different proteolytic enzymes to be included in a cleaning formulation that allows the effective elimination of gluten residues was studied. Alcalase (ALC), neutrase (NEUT) and flavourzyme (FLAV) were selected from in silico analysis. The presence of 1% (v/v) of linear alkylbenzene sulphonate (LAS), a common anionic detergent, improved the gluten solubility, which may favour its elimination. Chromatographic analysis showed that the three enzymes studied were able to hydrolyse gluten in the presence of LAS. The highest percentage of short peptides (< 5 kDa) was achieved with ALC, what increases the probability of reducing the gluten antigenicity. Besides, in the presence of ALC and detergent LAS have detected the lowest levels of gluten with ELISA kits. So, effective amounts of ALC and LAS were added to a cleaning formulation, where its proteolytic activity was maintained above 90% after 37 days at 4 °C and 25 °C (under dark). Preliminary validation of the effectiveness enzymatic cleaning formulation to hydrolyse gluten was performed in a ready-to-eat/frozen food company, in which previous episodes of cross-contamination with gluten have been detected. The gluten content decreased to values below 0.125 μg/100 cm 2 when the cleaning formulation was tested on different surfaces with different cleaning protocols, demonstrating the high suitability of the enzymatic cleaning formulation developed., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A one-step anion-exchange chromatography method (NaCl gradient elution on a DEAE Sepharose™ Fast Flow gel column) was developed to purify α-lactalbumin (α-LA) from whey protein isolate. α-LA nearly 100% pure (based on the total protein content) was obtained with a yield of about 39%. Besides pure α-LA, which was the main objective of this work, highly pure β-lactoglobulin was also obtained with a yield of about 59%. The high purity of the obtained α-LA samples allowed its use to synthesise protein nanotubes with excellent gelation properties for their use as food thickeners and bioactive carriers. The samples' purity degree obtained (based on the total protein content) was critical in the formation of proper nanotubes instead of random aggregates, which produced opaque and weak gels, less useful for food applications., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Thermophilic proteins have evolved different strategies to maintain structure and function at high temperatures; they have large, hydrophobic cores, and feature increased electrostatic interactions, with disulfide bonds, salt-bridging, and surface charges. Oligomerization is also recognized as a mechanism for protein stabilization to confer a thermophilic adaptation. Mesophilic proteins are less thermostable than their thermophilic homologs, but oligomerization plays an important role in biological processes on a wide variety of mesophilic enzymes, including thermostabilization. The mesophilic yeast Candida rugosa contains a complex family of highly related lipase isoenzymes. Lip3 has been purified and characterized in two oligomeric states, monomer (mLip3) and dimer (dLip3), and crystallized in a dimeric conformation, providing a perfect model for studying the effects of homodimerization on mesophilic enzymes. We studied kinetics and stability at different pHs and temperatures, using the response surface methodology to compare both forms. At the kinetic level, homodimerization expanded Lip3 specificity (serving as a better catalyst on soluble substrates). Indeed, dimerization increased its thermostability by more than 15 °C (maximum temperature for dLip3 was out of the experimental range; >50 °C), and increased the pH stability by nearly one pH unit, demonstrating that oligomerization is a viable strategy for the stabilization of mesophilic enzymes.

A β-Lactoglobulin fraction (r-βLg) was isolated from whey hydrolysates produced with cardosins from Cynara cardunculus. The impact of the hydrolysis process on the r-βLg structure and the rheological properties of heat-induced gels obtained thereafter were studied at different pH values. Differences were observed between r-βLg and commercial β-Lg used as control. Higher values for the fluorescence emission intensity and red shifts of the emission wavelength of r-βLg suggested changes in its tertiary structure and more solvent-exposed tryptophan residues. Circular dichroism spectra also supported these evidences indicating that hydrolysis yielded an intermediate (non-native) β-Lg state. The thermal history of r-βLg through the new adopted conformation improved the microstructure of the gels at acidic pH. So, a new microstructure with better rheological characteristics (higher conformational flexibility and lower rigidity) and greater water holding ability was founded for r-βLg gel. These results were reflected in the microstructural analysis by scanning electron microscopy., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels were synthesized by nanoemulsion polymerization in water-in-oil systems. Several cross-linking degrees and the incorporation of acrylic acid as comonomer at different concentrations were tested to produce nanohydrogels with a wide range of properties. The physicochemical properties of PNIPA nanohydrogels, and their relationship with the swelling-collapse behaviour, were studied to evaluate the suitability of PNIPA nanoparticles as smart delivery systems (for active packaging). The swelling-collapse transition was analyzed by the change in the optical properties of PNIPA nanohydrogels using ultraviolet-visible spectroscopy. The thermodynamic parameters associated with the nanohydrogels collapse were calculated using a mathematical approach based on the van't Hoff analysis, assuming a two-state equilibrium (swollen to collapsed). A mathematical model is proposed to predict both the thermally induced collapse, and the collapse induced by the simultaneous action of two factors (temperature and pH, or temperature and organic solvent concentration). Finally, van't Hoff analysis was compared with differential scanning calorimetry. The results obtained allow us to solve the problem of determining the molecular weight of the structural repeating unit in cross-linked NIPA polymers, which, as we show, can be estimated from the ratio of the molar heat capacity (obtained from the van't Hoff analysis) to the specific heat capacity (obtained from calorimetric measurements).

Unlabelled: We propose here a delivery drug-polymer system using poly(N-isopropylacrylamide) (PNIPA) nanohydrogels that enables pimaricin to be protected from hostile environments and allows the controlled release of the antifungal through environmental stimuli. We synthesized 2 nanohydrogels, 1 with 100% N-isopropylacrylamide (PNIPA(5)) and 1 with 80% N-isopropylacrylamide copolymerized and 20% acrylic acid (PNIPA-20AA(5)). Both were then, loaded with a pimaricin aqueous solution. The pimaricin release profiles of these 2 nanohydrogels were considerably different: PNIPA(5) released 10% and PNIPA-20AA(5) released 30% with respect to the free pimaricin release. Moreover, the diffusion experiments showed that pimaricin was released from the PNIPA-20AA(5) nanohydrogel for up to 3 times longer than free pimaricin. Therefore, incorporating acrylic acid as comonomer into the PNIPA nanohydrogel resulted in a slower but more continuous release of pimaricin. The highest pimaricin levels were reached when the most hydrophilic nanohydrogel was used. The bioassay results showed that the pimaricin-nanohydrogel system was highly effective in inhibiting the growth of the indicator strain in conditions of thermal abuse. The spoilage in acidified samples stored under fluorescent lighting was reduced by 80.94% ± 33.02% in samples treated with a pimaricin-loaded nanohydrogel, but only by 19.91% ± 6.68% in samples treated with free pimaricin. Therefore, 2 conclusions emerge from this study. One is that the nanohydrogel delivery system could impede the degradation of pimaricin. The other is that the inhibitory effect of the antifungal on yeast growth is more pronounced when it is added included into the nanohydrogel to the food, especially in an acidic environment., Practical Application: This article presents relevant results on the use of nanohydrogels in food packaging. Nanohydrogels could provide protection so that the pimaricin remains active for a longer time. They also allow the controlled release of pimaricin, which thus regulates the unnecessary presence of the antifungal in the food., (© 2012 Institute of Food Technologists®)

Extremophiles are organisms that have evolved to exist in a variety of extreme environments. They fall into a number of different classes that include thermophiles, halophiles, acidophiles, alkalophiles, psychrophiles, and barophiles (piezophiles). Extremophiles have the potential to produce uniquely valuable biocatalysts that function under conditions in which usually the enzymes of their nonextremophilic counterparts could not. Among novel enzymes isolated from extremophilic microorganisms, hydrolases, and particularly lipases and esterases are experiencing a growing demand. Lipases (EC 3.1.1.3) and esterases (EC 3.1.1.1) catalyze the cleavage of ester bounds in aqueous media and the reverse reaction in organic solvents. Both lipolytic enzymes have relevant applications in food, dairy, detergent, biofuel, and pharmaceutical industries. Here, we summarize the properties of lipases and esterases from the main extremophile groups: thermophiles and hyperthermophiles, psychrophiles, halophiles, alkalophiles/acidophiles, and solvent-resistant microorganisms.We report the biomass and lipolytic activity production by Thermus thermophilus HB27 in 5-L stirred-tank bioreactor at 70°C. Suitability of thermal spring water for culture media formulation is shown. In addition, a protocol to isolate and purify a cell-bound esterase from this microorganism is described.

Several studies in laboratory-scale bioreactors are undertaken in order to verify the beneficial effect of thermal spring water in the culture medium of Thermus thermophilus HB27. Two bioreactor configurations, stirred tank and airlift, are investigated to determine the most suitable one to develop a continuous process. Water mineral composition affects the lipolytic enzyme secretion and growth of T. thermophilus HB27 in both bioreactor configurations. Furthermore, the lipolytic activity is strongly enhanced when stirred tank bioreactor is used. Moreover, operation in a stirred tank at an agitation rate of 650 rpm leads to the highest total lipolytic activity (intra- and extracellular enzyme) around 280 U/L after 32 h. Continuous cultures operating in the optimised conditions determined in batch cultures are carried out. It is noticeable that the stirred tank bioreactor was able to operate in a continuous flow mode without operational problems. In addition, the lipolytic activity obtained is about 2-fold higher than that attained in batch cultures.

In this work, a system for high-level secretion by Saccharomyces cerevisiae of the Thermus thermophilus HB27 putative esterase YP&#95;004875.1 was constructed. The recombinant protein was purified and partially characterised. Its lipolytic activity dropped abruptly when the acyl chain length of the substrate increased from 12 to 18 carbon atoms, and variation of the reaction rate as function of substrate concentration followed Michaelis-Menten kinetics. These results suggested that the enzyme was an esterase. The recombinant enzyme was N-glycosylated and both the glycosylated and non-glycosylated forms showed activity. Compared to the native enzyme, thermal stability (half-life of 4.3h at 85 degrees C) was higher, optimum temperature (40 degrees C) was lower and optimum pH (7.5-8.5) was similar. These characteristics support potential biotechnological applications of the recombinant esterase., (Copyright 2009 Elsevier B.V. All rights reserved.)

In Thermus thermophilus HB27 cultures the localisation of lipolytic activity is extracellular, intracellular and membrane bound, with low percentage for the former. Therefore, the extracellular secretion must be increased in order to simplify the downstream process and to reduce the economic cost. This study focuses on the design of an innovative operational strategy to increase extracellular lipolytic enzyme production by T. thermophilus HB27 at bioreactor scale. In order to favour its secretion, the effect of several operational variables was evaluated. Among them, the presence of oils in the culture medium leads to improvements in growth and lipolytic enzyme activity. Sunflower oil is the most efficient inducer showing better results when added after 10h of growth. On the other hand, although surfactants lead to an almost complete inhibition of growth and lipolytic enzyme production, their addition along the culture could affect the location of the enzyme. Thus, by addition of surfactants at the stationary phase, a release of intracellular and membrane enzyme which increases the extracellular enzyme proportion is detected. Based on these results, strategies with successive addition of oil and surfactant in several culture phases in shake flask are developed and verified in a laboratory scale stirred tank bioreactor.

A quantitative screening for intra- and extracellular lipolytic activity was performed in submerged cultures of four Thermus strains using two different media (named T or D medium). Major differences in the extracellular lipolytic activity were observed in T medium, the highest values being for Thermus thermophilus HB27 and Thermus aquaticus YT1 strains (18 and 33 U/L, respectively). Two enzymes with lipase/esterase activity were identified in the four Thermus strains by zymogram analysis, with molecular weights of 34 and 62 kDa. No kinetic typification of the enzymes as primary metabolites was possible for any of the Thermus strains, because of the lack of a good fitting of the experimental lipolytic activity production rates to the Luedecking and Piret model. However, a linear relationship was found between the absolute values of biomass and total lipase/esterase activity (sum of intracellular and extracellular). For T. thermophilus HB27, an increase in the aeration rate caused the increase in the production of biomass and, particularly, intracellular lipolytic activity but the extracellular lipolytic activity was not affected except for the series with the strongest oxygen limitation. Transmission electronic microscopy revealed that T. thermophilus HB27 formed rotund bodies surrounded by a common membrane in cultures in the early stationary phase. The results suggest the occurrence of a specific mechanism of lipase/esterase secretion that might be due to the different composition and permeability of the cell membranes and those surrounding the rotund bodies.

Thermus thermophilus HB27 produces important levels of extracellular lipolytic activity when grown for 30 h at 70 degrees C in a complex medium. A method to detect esterase activity in these samples after non-reducing SDS-polyacrylamide electrophoresis was developed. The method, that implies the renaturalisation of the enzymes in the SDS-gels by washing with Triton X-100 at high temperatures, allowed detecting three esterases with different molecular weights (108, 62 and 34 kDa, respectively). The electrophoretic mobility determined under different experimental conditions suggested that the 34- and 108 kDa-esterases might correspond with two oligomeric states of a sole enzyme (monomer and trimer). Dissociation of the trimer into the monomer started when the samples were heated at temperatures higher than 60 degrees C in the presence of sodium dodecyl sulphate. Evidences were found that indicated the independent nature of the 62 kDa-esterase. A method to purify these enzymes from postincubates of T. thermophilus HB27 was developed following three steps: sodium cholate treatment, ethanol/ether precipitation and hydrophobic chromatography. In this way, an enzyme solution was obtained that contained the identified esterases/lipases. The partially purified enzymes showed an optimum of activity for the hydrolysis of p-nitrophenyl laurate at alkaline pH values and 80 degrees C, a high thermal stability and were very stable in the presence of high concentrations of isopropanol.

Four Thermus strains produced lipolytic activity when grown in liquid medium for 30 h at 70 degrees C. The highest total lipase/esterase activity (57 U l(-1)) was in Thermus aquaticus YT-1, followed by Thermus thermophilus HB27 and HB8 (33 and 25 U l(-1), respectively), and finally by Thermus sp. (16 U l(-1)). Extra-cellular activity was detected in T. aquaticus YT-1 and T. thermophilus HB27 (33 and 17 U l(-1)). All enzymes were stable at 80 degrees C over 30 min, and their activity towards fatty acid esters increased as substrate chain-length diminished (i.e. hydrolysis rate was up to 6-fold higher on p-nitrophenyl caproate than on laurate).

Three pure isoenzymes from Candida rugosa lipase (CRL: Lip1, Lip2, and Lip3) were compared in terms of their stability and reactivity in both aqueous and organic media. The combined effect of temperature and pH on their stability was studied applying a factorial design. The analysis of the response surfaces indicated that Lip1 and Lip3 have a similar stability, lower than that of Lip2. In aqueous media, Lip3 was the most active enzyme on the hydrolysis of p-nitrophenyl esters, whereas Lip1 showed the highest activity on the hydrolysis of most assayed triacylglycerides. The highest differences among isoenzymes were found in the hydrolysis of triacylglycerides. Thus, a short, medium, and long acyl chain triacylglyceride was the preferred substrate for Lip3, Lip1, and Lip2, respectively. In organic medium, Lip3 and Lip1 provided excellent results in terms of enantioselectivity in the resolution of ibuprofen (EF value over 0.90) and conversion, whereas initial esterification rate was higher for Lip3. However, the use of Lip2 resulted in lower values of conversion, enantiomeric excess, and enantioselectivity. In the case of trans-2-phenyl-1-cyclohexanol (TPCH) resolution, initial esterification rates were high except for Lip3, which also produced poor results in conversion and enantiomeric excess. The performance of the pure isoenzymes in the enantioselectivity esterification of these substrates was compared with different CRL crude preparations with known isoenzymatic content and the different results could not be explained by their isoenzymatic profile. Therefore, it can be concluded that other factors can also affect the catalysis of CRL and only the reproducibility between powders can ensure the reproducibility in synthesis reactions.

The yeast Candida rugosa produces several closely related extracellular lipases that differ in their substrate specificity. Here, we report the crystal structure of the isoenzyme lipase 2 at 1.97A resolution in its closed conformation. Lipase 2 shows a 79.4% amino acid sequence identity with lipase 1 and 82.2% with lipase 3, which makes it relevant to compare these three isoenzymes. Despite this high level of sequence identity, structural comparisons reveal several amino acid changes affecting the flap (residue 69), the substrate-binding pocket (residues 127, 132 and 450) and the mouth of the hydrophobic tunnel (residues 296 and 344), which may be responsible for the different substrate specificity and catalytic properties of this group of enzymes. Also, these comparisons reveal two distinct regions in the hydrophobic tunnel: a phenylalanyl-rich region and an aliphatic-rich region. Whereas this last region is essentially identical in the three isoenzymes, the phenylalanyl content in the first one is specific for each lipase, resulting in a different environment of the catalytic triad residues, which probably tunes finely their lipase/esterase character. The greater structural similarity observed between the monomeric form of lipase 3 and lipase 2 concerning the above-mentioned key residues led us to propose a significant esterase activity for this last protein. This enzymatic activity has been confirmed with biochemical experiments using cholesteryl [1-14C]oleate as substrate. Surprisingly, lipase 2 is a more efficient esterase than lipase 3, showing a twofold specific activity against cholesteryl [1-14C]oleate in our experimental conditions. These results show that subtle amino acid changes within a highly conserved protein fold may produce protein variants endowed with new enzymatic properties.

Previous purification of a crude extracellular enzyme preparation from Candida rugosa ATCC 14830 pilot-plant fed-batch fermentations showed the presence of two lipase isoenzymes, Lip2 and Lip3, differing in their molecular masses (58 and 62 kDa, respectively). These enzymes were purified but the lipases were forming active aggregates with a molecular mass higher than 200 kDa. In this work we developed a purification method following three steps: ammonium sulfate precipitation, sodium cholate treatment and ethanol/ether precipitation, and anion exchange chromatography which allowed the sequential disaggregation of the isoenzymes. Pure and monomeric Lip2 and Lip3 were characterized according to pI, glycosylation and activity for p-nitrophenol esters and triacylglycerols of varying acyl chain. Lip3 was the best catalyst for the hydrolysis of the simple esters and triacylglycerols with short and medium acyl chains.

We have investigated the interfacial activation process of two isoenzymes from Candida rugosa (Lip1 and Lip3) using triacetin as substrate. Kinetics were coupled to inhibition experiments in order to analyse the transition between the open and closed conformers. This process was slow, particularly for Lip1, in the absence of an interface provided by the substrate or a detergent. Dimers of Lip3 were also purified and their catalytic action was closer to that of a typical esterase. In spite of the high sequence homology between Lip1 and Lip3, small changes enhance hydrophobicity in the binding pocket of Lip3 and increase the flexibility of its flap. We postulated that these factors account for the higher tendency of Lip3 to dimerise fixing its open conformation.

An efficient expression system for the previously only weakly expressed thermophilic lipase BTL2 (Bacillus thermocatenulatus lipase 2) was developed for the production of large amounts of lipase in Escherichia coli. Therefore, the gene was subcloned in the pCYT-EXP1 (pT1) expression vector downstream of the temperature-inducible lambda promoter PL. Three different expression vectors were constructed: (i) pT1-BTL2 containing the mature lipase gene, (ii) pT1-preBTL2 containing the prelipase gene and (iii) pT1-OmpABTL2 containing the mature lipase gene fused to the signal peptide of the OmpA protein, the major outer membrane protein of E. coli. With pT1-BTL2 and pT1-preBTL2, comparable expression levels of 7000-9000 U/g cells were obtained independently of the E. coli host. In contrast, with E. coli JM105 harbouring pT1-OmpABTL2, 660,000 soluble lipase U/g cells was produced, whereas, with E. coli DH5 alpha and BL321, production levels of 30,000 U/g cells were achieved. However, most of the lipase remained insoluble but active after cell breakage because of the unprocessed OmpA signal peptide. A simple cholate extraction followed by proteinase K cleavage and ultrafiltration allowed the isolation of 1.15 x 10(6) units of 90% pure mature lipase/wet cells.

Escherichia coli BL321 was transformed with the expression plasmid pCYTEXP1 carrying the BTL2 gene from Bacillus thermocatenulatus under the control of the strong temperature-inducible lambda pL promoter and was cultivated in a 100 1 bioreactor. The mature lipase was produced in large quantities (54,000 U g-1 wet cells) and further purified to homogeneity by a two-step purification protocol (hydrophobic chromatography and gel filtration chromatography). The pure enzyme was characterized and its physicochemical properties compared to those of the BTL2 lipase which had previously been weakly expressed in E. coli under the control of its native promoter on pUC18, yielding 600 U g-1 wet cells. The specific activity of the overexpressed enzyme was approx. 5-fold higher than that of the weakly expressed enzyme. The two proteins showed the same pI and N-terminal sequence and had very similar thermostability, pH stability, optimum pH and temperature activity, and substrate specificity. Both enzymes were extremely stable in the presence of several organic solvents and detergents. With trioleylglycerol as a substrate, the overexpressed lipase cleaves each of the three ester bonds. The purified BTL2 lipase shows a strong tendency to aggregate. Direct evidence for changes in the aggregation state was obtained by gel filtration chromatography. The effect of aggregation on lipase activity was strongly dependent on both substrate and temperature during the assay. Under certain conditions, a direct relationship was found between the molecular mass of the lipase aggregates and the increase in activity upon the addition of 1% (w/v) sodium cholate.

An expression library was generated by partial Sau3A digestion of genomic DNA from the thermophile Bacillus thermocatenulatus and cloning of DNA fragments in pUC18 in Escherichia coli DH5alpha. Screening for lipase activity identified a 4.5 kb insert in pUC18 which directed the production of lipase in E. coli DH5alpha. A subclone with a 2.2 kb insert was sequenced. The lipase gene codes for a mature lipase of 388 amino acid residues, corresponding to a molecular weight of 43 kDa. As in other Bacillus lipases, an Ala replaces the first Gly in the conserved pentapeptide Gly-X-Ser-X-Gly found in most lipases. The region upstream of the lipase gene contains a Bacillus promoter which directs the expression of lipase in E. coli DH5alpha. The expressed lipase was isolated and purified 312-fold to homogeneity. N-terminal sequencing of the purified lipase revealed a correct cleavage of the preprotein in E. coli DH5alpha. Maximum activity was found at pH 8.0-9.0 with tributyrin and olive oil as substrates and at 60-70 degrees C with p-NPP and olive oil as substrates. The lipase showed high stability at pH 9.0-11.0 and towards various detergents and organic solvents.

Two isoenzymes of Candida rugosa lipase, having the same mol.wt., size and similar aminoacid sequence, were studied in reverse micelles of AOT. The results demonstrated the relevance of lipase hydrophobicity in reactions in anionic micelles. This is a key factor in mitigating the inhibition effect of charged micelles. The more hydrophobic isolipase A was a better biocatalyst for hydrolytic processes in these systems. Its alpha-helix content increased from 31% to 49% of the total structure in reverse micelles. A fluorescence study indicated a more apolar environment for the more hydrophobic isolipase A. Emission spectra of this isolipase in the AOT systems were blue shifted. At omega 0 values where each isolipase presented its maximum activity, a decrease of the emission intensity of Trp was found. An enzyme and substrate dependence of optimal omega 0 is reported. The different interaction of isolipases A and B with the micellar system produced an opposite omega 0 dependence to their stabilities. The more hydrophobic lipase A had higher stability at higher droplet sizes.