Search

The laser performance and crystalline micro-structural properties of near-infrared step-index channel waveguides fabricated inside Neodymium doped YAG laser ceramics by means of three-dimensional sub-picosecond pulse laser direct writing are reported. Fluorescence micro-mapping of the waveguide cross-sections reveals that an essential crystal lattice re-distribution has been induced after short pulse irradiation. Such lattice re-distribution is evidenced at the waveguide core corresponding to the laser written refractive index increased volume. The waveguides core surroundings also present diverse changes including slight lattice disorder and bi-axial strain fields. The step-index waveguide laser performance is compared with previous laser fabricated waveguides with a stress-optic guiding mechanism in absence of laser induced lattice re-distribution. [ABSTRACT FROM AUTHOR]

Featured Application: The investigated YAS glass microspheres doped with Nd3+ ions have great potential as remote optical temperature sensors. Moreover, they are suitable for the development of laser devices with low power thresholds. Yttria–alumina–silica (YAS) glass microspheres doped with Nd3+ ions were excited with a 532 nm continuous laser in order to study the dependency of the wavelength of the whispering gallery mode (WGM) peaks on the temperature of the sample. This was possible due to a previous calibration of the 808 nm and 890 nm emission bands of the Nd:YAS glass sample for different temperatures using the fluorescence intensity ratio (FIR) technique. A maximum sensitivity of 15 × 10−6 K−1 and a temperature resolution limit of 0.2 K were obtained for the microsphere sensor. Moreover, laser emission at 1064 nm was observed by continuous pumping at 532 nm, and a power threshold of 100 mW was determined. Upconversion emissions of Nd3+ were also studied by exciting the sample at 808 nm. [ABSTRACT FROM AUTHOR]

This paper provides a generic way to fabricate a high-index contrast tapered waveguide platform based on dielectric crystal bonded on glass for sensing applications. As a specific example, KLu(WO4)2 crystal on a glass platform is made by means of a three-technique combination. The methodology used is on-chip bonding, taper cutting with an ultra-precise dicing saw machine and inductively coupled plasma-reactive ion etching (ICP-RIE) as a post-processing step. The high quality tapered waveguides obtained show low surface roughness (25 nm at the top of the taper region), exhibiting propagation losses estimated to be about 3 dB/cm at 3.5 μm wavelength. A proof-of-concept with crystal-on-glass tapered waveguides was realized and used for chemical sensing. [ABSTRACT FROM AUTHOR]

Abstract: In this work, we have examined three new bistable systems based on the luminescence of three different crystals activated with trivalent rare earth ions. We have focussed our attention on Yb3+ ions activators, for which the most relevant results are obtained. The first crystal, Sr0.6Ba0.4Nb2O6, is a ferroelectric material with a relatively low phase transition temperature (∼370K), which provides bistability in the luminescence of Yb3+ ions due to the thermal hysteresis associated with phase transition. The second crystal, LiNbO3, provides an intrinsic bistability in the luminescence of Yb3+ ions, which is driven by changes in the excitation intensity. In the third crystal, NdPO4, a new mechanism of excitation intensity driven bistability is obtained when activated with Yb3+ ions, due to a interplay between the Nd3+↔Yb3+ energy transfer and back transfer processes. [Copyright &y& Elsevier]

This paper provides a generic way to fabricate a high-index contrast tapered waveguide platform based on dielectric crystal bonded on glass for sensing applications. As a specific example, KLu(WO 4 ) 2 crystal on a glass platform is made by means of a three-technique combination. The methodology used is on-chip bonding, taper cutting with an ultra-precise dicing saw machine and inductively coupled plasma-reactive ion etching (ICP-RIE) as a post-processing step. The high quality tapered waveguides obtained show low surface roughness (25 nm at the top of the taper region), exhibiting propagation losses estimated to be about 3 dB/cm at 3.5 m wavelength. A proof-of-concept with crystal-on-glass tapered waveguides was realized and used for chemical sensing., Competing Interests: The authors declare no conflict of interest.

We report on efficient laser operation of the first holmium monoclinic double tungstate waveguide laser fabricated by femtosecond direct laser writing. A depressed-index buried channel waveguide with a 60 μm diameter circular cladding was inscribed in 5 at.% Ho 3+ :KGd(WO 4 ) 2 . It was characterized by confocal microscopy and μ-Raman and μ-luminescence spectroscopy, indicating well-preserved crystallinity of its core. Pumped by a thulium bulk laser, the holmium waveguide laser generated 212 mW at 2055 nm with a slope efficiency of 67.2%. The waveguide propagation losses were 0.94±0.2  dB/cm.

We report mid-infrared LiNbO 3 depressed-index microstructured cladding waveguides fabricated by three-dimensional laser writing showing low propagation losses (~1.5 dB/cm) at 3.68 µm wavelength for both the transverse electric and magnetic polarized modes, a feature previously unachieved due to the strong anisotropic properties of this type of laser microstructured waveguides and which is of fundamental importance for many photonic applications. Using a heuristic modeling-testing iteration design approach which takes into account cladding induced stress-optic index changes, the fabricated cladding microstructure provides low-loss single mode operation for the mid-IR for both orthogonal polarizations. The dependence of the localized refractive index changes within the cladding microstructure with post-fabrication thermal annealing processes was also investigated, revealing its complex dependence of the laser induced refractive index changes on laser fabrication conditions and thermal post-processing steps. The waveguide modes properties and their dependence on thermal post-processing were numerically modeled and fitted to the experimental values by systematically varying three fundamental parameters of this type of waveguides: depressed refractive index values at sub-micron laser-written tracks, track size changes, and piezo-optic induced refractive index changes.

Mid-infrared lithium niobate cladding waveguides have great potential in low-loss on-chip non-linear optical instruments such as mid-infrared spectrometers and frequency converters, but their three-dimensional femtosecond-laser fabrication is currently not well understood due to the complex interplay between achievable depressed index values and the stress-optic refractive index changes arising as a function of both laser fabrication parameters, and cladding arrangement. Moreover, both the stress-field anisotropy and the asymmetric shape of low-index tracks yield highly birefringent waveguides not useful for most applications where controlling and manipulating the polarization state of a light beam is crucial. To achieve true high performance devices a fundamental understanding on how these waveguides behave and how they can be ultimately optimized is required. In this work we employ a heuristic modelling approach based on the use of standard optical characterization data along with standard computational numerical methods to obtain a satisfactory approximate solution to the problem of designing realistic laser-written circuit building-blocks, such as straight waveguides, bends and evanescent splitters. We infer basic waveguide design parameters such as the complex index of refraction of laser-written tracks at 3.68 µm mid-infrared wavelengths, as well as the cross-sectional stress-optic index maps, obtaining an overall waveguide simulation that closely matches the measured mid-infrared waveguide properties in terms of anisotropy, mode field distributions and propagation losses. We then explore experimentally feasible waveguide designs in the search of a single-mode low-loss behaviour for both ordinary and extraordinary polarizations. We evaluate the overall losses of s-bend components unveiling the expected radiation bend losses of this type of waveguides, and finally showcase a prototype design of a low-loss evanescent splitter. Developing a realistic waveguide model with which robust waveguide designs can be developed will be key for exploiting the potential of the technology.

We report on the fabrication of active optical channel waveguides in Er(3+)/MgO co-doped near stoichiometric lithium niobate crystals by means of selective low-dose oxygen ion implantation through a specially designed photoresist stripe mask. After post-implantation treatment at 260 degrees C for 1 h, the channel waveguides possess a propagation loss of approximately 1.7 dB/cm. The micro-luminescence investigation reveals that fluorescence emissions at approximately 1.5 microm in the waveguides are well preserved with respect to the bulk, exhibiting possible applications for integrated active photonic devices.