Search

[EN] Emerging pollutants (EPs) include a wide array of chemical compounds, as well as some microorganisms, which presence was unknown or unmeasurable until recently, or have recently started to be considered a threat towards the environment or animal and human health. No clear or homogeneous regulations exist for their measurement or control, and efforts should be made to assess their presence and offer solutions for their safe management, as well as to achieve an optimal protection of water resources. A previous study performed by our research group thoroughly studied a wide profile of EPs in El Hierro Island (Canary Islands) for the first time. Now, we present the study of the same panel of 70 EPs in La Palma Island (Canary Islands). 14 samples were collected in 2021, at different locations in La Palma island, representing seven municipalities (Los Llanos de Aridane, Santa Cruz de la Palma, El Paso, Breña Baja, Tazacorte, Barlovento and Fuencaliente) and four installation types (Piezometers/Wells, Wastewater Treatment Plant (WWTP), Water Gallery and Water Springs). High performance liquid chromatography-mass spectrometry (HPLC-MS) was performed to analyse the EP array, which included five chemical families: UV filters, UV blockers/stabilizers, parabens, Pharmaceutical Active Compounds (PhACs) and pesticides. Subsequently, a comprehensive descriptive and statistical analysis, including different tests was performed on the data obtained. Heterogeneous concentration levels of the EPs studied were found based on municipality and installation type among the island, with some of the PhACs and UV blockers/stabilizers showing very high levels, especially at Breña Baja and wastewater treatment plants (WWTPs). It is worth noting that some of the samples comprised within the WWTPs category were collected outside the treatment plant, after water has been treated, so they should not bear dangerous concentrations of any hazardous compound. The high presence of two pesticides, i

The fate of selected UV filters (UVFs) was investigated in two soil aquifer treatment (SAT) systems, one supplemented with a reactive barrier containing clay and vegetable compost and the other as a traditional SAT reference system. We monitored benzophenone-3 (BP-3) and its transformation products (TPs), including benzophenone-1 (BP-1), 4,4'-dihydroxybenzophenone (4DHB), 4-hydroxybenzophenone (4HB), and 2,2'-dihydroxy-4-methoxybenzophenone (DHMB), along with benzophenone-4 (BP-4) and avobenzone (AVO) in all involved compartments (water, aquifer sediments, and biofilm). The reactive barrier, which enhances biochemical activity and biofilm development, improved the removal of all detected UVFs in water samples. Among monitored UVFs, only 4HB, BP-4, and AVO were detected in sediment and biofilm samples. But the overall retained amounts were several orders of magnitude larger than those dissolved. These amounts were quantitatively reproduced with a specifically developed simple analytical model that consists of a mobile compartment and an immobile compartment. Retention and degradation are restricted to the immobile water compartment, where biofilm absorption was simulated with well-known compound-specific Kow values. The fact that the model reproduced observations, including metabolites detected in the biofilm but not in the (mobile) water samples, supports its validity. The results imply that accumulation ensures significant biodegradation even if the degradation rates are very low and suggest that our experimental findings for UVFs and TPs can be extended to other hydrophobic compounds. Biofilms act as accumulators and biodegraders of hydrophobic compounds.

The fate of selected UV filters (UVFs) was investigated in two soil aquifer treatment (SAT) systems, one supplemented with a reactive barrier containing clay and vegetable compost and the other as a traditional SAT reference system. We monitored benzophenone-3 (BP-3) and its transformation products (TPs), including benzophenone-1 (BP-1), 4,4'-dihydroxybenzophenone (4DHB), 4-hydroxybenzophenone (4HB), and 2,2'-dihydroxy-4-methoxybenzophenone (DHMB), along with benzophenone-4 (BP-4) and avobenzone (AVO) in all involved compartments (water, aquifer sediments, and biofilm). The reactive barrier, which enhances biochemical activity and biofilm development, improved the removal of all detected UVFs in water samples. Among monitored UVFs, only 4HB, BP-4, and AVO were detected in sediment and biofilm samples. But the overall retained amounts were several orders of magnitude larger than those dissolved. These amounts were quantitatively reproduced with a specifically developed simple analytical model that consists of a mobile compartment and an immobile compartment. Retention and degradation are restricted to the immobile water compartment, where biofilm absorption was simulated with well-known compound-specific Kow values. The fact that the model reproduced observations, including metabolites detected in the biofilm but not in the (mobile) water samples, supports its validity. The results imply that accumulation ensures significant biodegradation even if the degradation rates are very low and suggest that our experimental findings for UVFs and TPs can be extended to other hydrophobic compounds. Biofilms act as accumulators and biodegraders of hydrophobic compounds., This work was financially supported by the Spanish government (project CONMIMO, TED2021-131188B-C32 and TED2021-131188B-C31), the Catalan Research Project RESTORA (ACA210/18/00040) and SGR (2021-SGR-00609), and by EU project MARADENTRO (PCI2019-103425 and PCI2019-103603). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Grant CEX2018-000794-S funded by MCIN/AEI/10.13039/501100011033). The authors also thank the Consorci d’Aigües de la Costa Brava Girona (CACBG) for the access to the WWTP, and to BEKOlut for the provision of the QuEChERS used. Pedro Chamorro is acknowledged for his help in the UVFs analysis., Peer Reviewed, Postprint (published version)

Currently, water scarcity affects more than three billion people. Nevertheless, the volume of treated wastewater discharged into the environment is estimated to exceed 100 m3 per inhabitant/year. These water resources are regularly used in agriculture worldwide to overcome water shortages. Such a practice, however, entails the uptake of waterborne pollutants, such as pharmaceuticals and personal care products (PPCPs), by crops and their further access to the food web, constituting an additional route of human exposure to PPCPs, with potential health outcomes. In this study, the occurrence of 56 PPCPs in tomatoes, lettuce, and carrot, together with soil and irrigation water, was evaluated using a QuEChERS-based methodology for extraction and LC-MS/MS for analysis. The influence of the selected cultivation conditions on the plant uptake levels of PPCPs was assessed. Two irrigation water qualities (secondary and tertiary treatment effluents), two soil compositions (sandy and clayey), two irrigation systems (dripping and sprinkling), and three crop types (lettuce, tomato, and carrot) were tested. Carrots showed the highest load of PPCPs (7787 ng/g dw), followed by tomatoes (1692 ng/g dw) and lettuces (1248 ng/g dw). The most translocated PPCPs were norfluoxetine (fluoxetine antidepressant main metabolite) (521 ng/g dw), and the anti-inflammatory diclofenac (360 ng/g dw). Nine PPCPs, are reported to be accumulated in crops for the first time. Water quality was the most important factor for reducing PPCPs' plant uptake. Overall, the best conditions for reducing PPCP uptake by crops were irrigation with reclaimed water by sprinkling in soils with higher clay content. The risk assessment performed revealed that the crops' consumption posed no risk to human health. This study serves as the first comprehensive assessment of the relevance of diverse cultivation factors on PPCPs' plant uptake under field agricultural practices.

The thesis aims to implement a code in order to receive and decode the beacon signal of the OPS-SAT cubesat using the TGS facilities., Terrassa Ground Station facility o ers the students the opportunity to participate and learn about the satellites telecommunications field. Despite this, the lack of continuous mainte-nance slows down the progress of the project because of the constant need of actualization and dependency on old-fashioned systems. The objective of this thesis is to continue with the work done by the previous students and successfully implement the OPS-SAT reception code along with the development of a more accessible environment for new students. This thesis pretends to settle down the required basis to start operating and understanding ground stations using as an example all the subsystems used to establish contact with OPS-SAT satellite.