Search

A large amount of fracturing fluid in hydraulic fracturing is imbibed into the shale fracture/matrix, which leads to significant uncertainty in gas recovery evaluation. The mechanism of imbibition impact on the gas–water flow is not well understood. In this study, systematic comparative experiments are carried out to simulate imbibition in fractured shale samples obtained from the Wufeng-Longmaxi shale reservoirs in China, and the imbibition effect in the fracture–matrix system is qualitatively and quantitatively investigated. Nine cores are collected to measure their porosity and permeability using a helium porosimeter and nitrogen pulse–decay tests. Gas/liquid single-phase flow experiments are then carried out using methane and KCl solution, respectively. Subsequently, dynamic imbibition experiments are carried out on three samples in a visual cell. The gas–water interfacial tension, water imbibition amount, and displacement velocity are recorded. A single-phase gas/liquid flow test shows a high linear correlation between the fluid displacement velocity and pressure gradient in the fractured samples as the fracture is the main flow channel, dominantly determining the flow behavior. Moreover, the capillary force was introduced in the cross-flow term of the triple-medium model to characterize the imbibition effect, and a two-phase flow simulation model considering the fracturing fluid imbibition retention was developed, and the two-phase flow behavior by considering the imbibition effect of the fracturing fluid retention in the shale gas reservoir was analyzed. Valuable experiment data in this work are provided, which can be used to validate analytical equations for gas/water flow in the shale fracture–matrix system.

Energy security and the reduction of greenhouse gases such as carbon dioxide are two major crises facing the world today. Using carbon dioxide to develop unconventional oil and gas resources is a positive way to reduce greenhouse gas emissions, which can significantly alleviate global energy security issues. This study systematically introduces the prerequisites for CO2 to extract crude oil and CO2 to be safely and effectively stored. Under high temperature and high pressure, the rock properties of deep reservoirs are completely different from those of atmospheric conditions in the two-phase porous media environment of crude oil and high salinity formation water. The research progress on the phase behavior, mutual solubility, CO2 storage potential and mechanism between supercritical CO2 and crude oil, formation water and reservoir are reviewed in detail. In addition, CO2 leakage will inevitably occur during long-term geological storage, the proper estimation and evaluation of the risk and establishment of corresponding sealing methods are the way forward for CO2 geological storage. By systematically elaborating the nature, advantages and disadvantages of fluid–fluid, fluid–solid interaction and geological integrity destruction mechanism, the directions in which several key problems should be solved were pointed out.

The microscale liquid flow in nanoscale systems considering slip boundary has been widely studied in recent years, however, they are limited to single-phase flow. As in nature, multicomponent and multiphase flows can also exist with non-zero slip velocities, such as oil/water slip flow in nanoporous shale. In this paper, a novel multicomponentmultiphase multiple-relaxation-time lattice Boltzmann method with a combinational slip boundary condition is developed to study the two-phase slip flow behaviors. The proposed combined slip boundary condition is derived from adjustments to the conventional diffusive Maxwell’s reflection and half-way bounce-back scheme boundary parameters, incorporating a compelled conservation requirement. With the analysis of simulations for the layer, slug, and droplet types of two-phase flow in single pores, and two-phase flow in porous media with complex wall geometry, it can be concluded that the proposed schemes of two-phase slip boundary conditions are particularly suitable for multicomponent and multiphase flow with a non-zero slip velocity. The proposed model can be used to determine relative permeability and simulate spontaneous imbibition in particular in shale reservoirs where those flow properties are hard-to-determine [ABSTRACT FROM AUTHOR]