Search

This paper concerns the control problem of the active and harmonic power sharing caused by the mismatched impedance in resistive feeders-dominated microgrids. A distributed model predictive control (DMPC) scheme is suggested to regulate the virtual impedance of each involved unit for power sharing based on the neighbor’s state. With the distributed philosophy, the central controller is not required. Moreover, the proposed method benefits resilience to communication failure by designing the communication matrix. Furthermore, it involves propagating information among units in a short period, significantly reducing the communication and computation burden. Finally, the performance of the proposed control scheme is evaluated in terms of its convergence, robustness to communication delay and load variations, resilience to communication failure, and plug-and-play functionality without communication in an inverter-connected system.

Multiport dc–dc converters have been intensively concerned and studied in power electronics-based systems. However, the instability issue and its suppression method are rarely discussed. This article investigates the stability of the triple active bridge (TAB) converter with two constant power loads by impedance-based method, where the output impedance of the TAB converter is derived by the extra element theorem. Then, a virtual impedance-based active damping (AD) control is proposed, where the virtual impedance has four different positions at the output capacitor of the dc port. The effect of the proposed AD control on output impedance and system dynamic response is analyzed. Meanwhile, the range of the virtual impedance is specified. Simulation is performed in PLECS and experimental tests are conducted on a scale-down TAB prototype to verify the effectiveness of the proposed AD control.

This article proposes an analytic approach to design the typical power factor correction (PFC) control of an electric vehicle (EV) charger to ensure small signal stability in weak grid conditions. Compared to the previous works, the proposed method considers the dynamics of all the control loops, i.e., phase-locked loop (PLL), voltage loop (VL), and current loop (CL). The impacts of key influential parameters on stability are analyzed. Furthermore, the upper limits of the PLL and VL bandwidth to ensure small signal stability are derived. Accordingly, the influences of the CL bandwidth, short circuit ratio (SCR), and the filter inductance on the upper limit of the PLL bandwidth and the VL bandwidth are quantified. Consequently, a design procedure that eliminates the need to model the input impedance for tuning the controller to prevent small signal instability is proposed. Simulations and experiments validate the analysis.

Balancing converters play a pivotal role in bipolar dc grids, and while numerous topologies have been explored, many suffer from drawbacks, such as reliance on bulky passive components, limited soft-switching capabilities, or complex control mechanisms. This article introduces an LC series-resonant balancing converter topology that addresses these issues, featuring smaller passive components, the ability to achieve soft switching across its entire operational range, and simplified control with proper design. By operating in the capacitive region, the converter ensures soft switching for the complete load range, enabling all switches to achieve zero voltage switching (ZVS) turn on. The study reveals that the converter’s power flow depends on both the switching frequency ( $f_{\mathrm { sw}}$ ) and the phase shift angle ( $\phi $ ), but notably, when the resonant inductor value is kept sufficiently low, $f_{\mathrm { sw}}$ and $\phi $ become decoupled, simplifying power flow control. In addition, this article provides detailed design guidelines for the converter’s resonant tank and validates the operation and control of the converter through an experimental setup.

Communication-based distributed secondary control is deemed necessary to restore the state of islanding AC microgrids to set points. As its limited global information, the microgrids become vulnerable to cyber-attacks, which by falsifying the communicating singles, like the angular frequency, can disturb the power dispatch in the microgrids or even induce blackout by pushing the microgrids beyond the safe operation area and triggering the protection. To make the microgrids more cyber secure, adaptive resilient control for the secondary frequency regulation is proposed. It assumes that each converter is communicating with its adjacent converters. With the proposed control, the weight of the communication channel being attacked is automatically reduced, and the more the communicating signals are falsified, the further the weight of that communication channel is weakened. The proposed approach does not rely on attack detection and thereby is easy to implement; Besides, it still works when challenged by a combination of multi-attack signals; Moreover, it applies to multiple communication lines getting attacked cases. Finally, the effectiveness and feasibility of the proposed resilient control scheme are validated by both simulations and experimental results.

Due to the mismatched feeder impedances in a resistive feeder AC microgrid, it’s challenging to accurately share harmonic and active power while promising a low bus voltage distortion rate. To address this issue, this paper proposes a distributed philosophy-based virtual impedance modulation strategy. The proposed method regulates the fundamental and harmonic impedance at the desired value by exchanging information with its adjacent inverters. Notably, the proposed method benefits from resilience against communication delay, failure, and cyber-attacks. Moreover, it significantly reduces the communication burden. The proposed method’s effectiveness is validated through experiments conducted in various cases, including different communication scenarios and plug-and-play operations.