Search

This study deals with the variation in strength of clays stabilized by a special binder—the CEM II/B-V type of Portland-fly ash cement. Two sources of uncertainties were examined, that is, the uncertainty in cement fraction in the binder, and the nonuniformity in binder concentration resulted from the process of mixing binder slurry with in situ clays. These two uncertainties were quantitatively described as two random variables, and the analyses were conducted through the Monte Carlo simulation method. Results indicate that the strength is insensitive to the cement fraction in the binder but is sensitive to the binder concentration; the variation of the latter even results in an amplified variation of strength. The variation of binder concentration is proposed to be linked up with the variation of strength through the operational parameter of blade rotation number. By doing so, the results could benefit designers in quality control prior to the construction of soil stabilization.

In this paper, we present a novel interactive cutting simulation model for soft tissue based on the meshless framework. Unlike most existing methods that consider the cutting process of soft tissue in an over simplified manner, the presented model is able to simulate the complete cutting process that includes three stages: deformation before cutting open, cutting open, and deformation after cutting open. To characterize the complicated physical and mechanical properties of soft tissue, both nonlinearity and viscoelasticity were incorporated into the equations governing the motion of soft tissue. A line contact model was used for simulating the cutting process after analyzing the two major types of surgical instruments, i.e., scalpel and electrostick. The cutting speed and angle were taken into account in order to improve haptic rendering. Biomechanical tests and simulation experiments verified the validity of the introduced model. Specifically, the displacement versus cutting force curves can be divided into three segments corresponding to the three stages of the cutting process. The results were also applied in a liver cutting simulating system and satisfactory visual effect and haptic feedback were achieved.