Search

To explore the impacts of galactose side-chain on the prebiotic activity of xyloglucan oligosaccharides (XGOS), XGOS and de-galactosylated XGOS (DG-XGOS) were prepared from tamarind using an enzymatic method. The differences in structural features of XGOS and DG-XGOS were systematically analyzed. Their in vitro fermentation characteristics of human fecal microbiota were explored. These results indicated that both XGOS and DG-XGOS promoted short-chain fatty acids (SCFAs) production, decreased pH, and changed the microbiota composition of the fermentation broth. Comparatively, DG-XGOS was more effective than XGOS in producing SCFAs, inhibiting the phylum Proteobacteria prevalence, and promoting the phyla Bacteroidetes and Actinobacteria prevalence. In summary, the xyloglucan degradation products exert potential prebiotic activity. Removing the galactose side-chains further enhances oligosaccharide utilization by fecal microbiota, offering a valuable approach to improve the biological efficacy of oligosaccharides.

The arabinogalactan in the representative softwood biomass of larch was degraded using an environmentally friendly hydrogen peroxide and vitamin C (H2O2-VC) system to improve its immunomodulatory activity. Through the H2O2-VC degradation mechanism, hydroxyl radicals are generated, which then target the hydrogen atoms within polysaccharides, resulting in the breaking of glycosidic bonds. Given the impact of oxidative degradation on polysaccharides, we identified three specific arabinogalactan degradation products distinguished by their arabinosyl side chain compositions. The primary structures of the degradation products were investigated using Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. Congo red staining showed that the degradation products were absent in the triple-helix structure. The results of the in vitro immunological experiments indicated that an appropriate reduction in the molar ratio of arabinose to galactose enhanced the immunostimulatory effects on RAW 264.7 cells. In addition, the immunostimulatory pathway mediated by arabinogalactan was explored by toll-like receptor 4 (TLR4) inhibitor (TAK-242) These findings provide novel insights into the understanding of the relationship between the structure of arabinogalactan and its biological activity.

Abstract Background To compare the surgical effects of coronary intervention through the transradial intervention (TRI) versus distal transradial intervention (dTRI) approach. Methods From September 2020 to April 2021, 302 patients undergoing coronary artery angiography (CAG) or percutaneous coronary intervention in our hospital were retrospectively included. Patients were divided into the TRI group and dTRI group with 151 cases in each group. The technique features, lesion features, and cannulation process were compared between the two groups. Results The number of patients who underwent CAG in the dTRI group (35.1%) was significantly greater compared with the TRI group (12.6%) (P 0.05). RAD at the puncture site was a predictor of the overall cannulation success rate with an AUC of 0.747 (95% CI 0.663–0.860; P

Introduction: Face masks are regarded as effective Personal Protective Equipment (PPE) during the COVID-19 pandemic. However, the dominant polypropylene (PP)-based masks are devoid of antiviral/antibacterial activities and create enormous environmental burdens after disposal. Objectives: Here we report a facile and potentially scalable method to fabricate biodegradable, breathable, and biocidal cellulose nonwovens (BCNWs) to address both environmental and hygienic problems of commercially available face masks. Methods: TEMPO-oxidized cellulose nonwovens are rendered antiviral/antibacterial via covalent bonding with disinfecting polyhexamethylene guanidine or neomycin sulfate through carbodiimide coupling chemistry. Results: The obtained results showed that the BCNWs have virucidal rate of >99.14%, bactericidal efficiency of >99.51%, no leaching-out effect, and excellent air permeability of >1111.5 mm s−1. More importantly, the as-prepared BCNWs can inactivate SARS-CoV-2 instantly. Conclusions: This strategy provides a new platform for the green fabrication of multifunctional cellulose nonwovens as scalable bio-protective layers with superior performance for various PPE in fighting COVID-19 or future pandemics. Additionally, replacing the non-biodegradable non-antimicrobial PP-based masks with the cellulose-based masks can reduce the plastic wastes and lower the greenhouse gas production from the incineration of disposed masks.

In the process of biodegradation of azo dye, redox mediators (RMs) were found to significantly enhance the removal efficiency. In this work, biodegradable RMs deriving from lignin-based monomers were prepared via peroxidation to investigate whether similar chemicals present in lignin-rich streams from biorefineries could be used for biological treatment of azo dyes. The as-prepared RMs were characterized by fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectrometer (GC–MS), cyclic voltammetry and electron paramagnetic resonance, and the degradation metabolites were analyzed by high performance liquid chromatography (HPLC). The induction of RMs accelerated the extracellular electron transfer, resulting efficient methyl orange (MO) decolorization. The decolorization efficiency of MO motivated by the products of vanillin peroxidation were increased from 20% to 95% in 12 h. Moreover, the products deriving from syringaldehyde peroxidation increased the efficiency from 40% to 85% in 24 h. The degradation results of the two RMs were well fitted by zero-order and first-order kinetic models. Under saline condition, the strain still remained a high and stable removal efficiency to MO in the presence of RMs, making it acceptable to be applied in the practical wastewater. The extracellular electron transfers and metabolic products were explored to unveil the mechanisms of enhancement. This study could provide a new route for the functional utilization of lignin-resource and a theoretical guidance for efficient biodegradation of azo dye wastewater.

In this work, hydrothermal pretreatment (autohydrolysis) was coupled with endo-xylanase enzymatic hydrolysis for bamboo shoot shell (BSS) to produce glucose and valuable xylooligosaccharides (XOS) rich in xylobiose (X2) and xylotriose (X3). Results showed that the enzymatic hydrolysis efficiency of pretreated BSS residue reached 88.4% with addition of PEG during the hydrolysis process. To enrich the portions of X2–X3 in XOS, endo-xylanase was used to hydrolyze the XOS in the prehydrolysate, which was obtained at the optimum condition (170°C, 50 min). After enzymatic hydrolysis, the yield of XOS reached 25.6%, which contained 76.7% of X2–X3. Moreover, the prehydrolysate contained a low concentration of fermentation inhibitors (formic acid 0.7 g/L, acetic acid 2.6 g/L, furfural 0.7 g/L). Based on mass balance, 32.1 g of glucose and 6.6 g of XOS (containing 5.1 g of X2-X3) could be produced from 100.0 g of BSS by the coupled technology. These results indicate that BSS could be an economical feedstock for the production of glucose and XOS.

Oligosaccharides have received considerable attention as prebiotics because they exhibit potential health benefits related to their ability to modulate intestinal bacterial composition. This study evaluated the effects of galactomannan oligosaccharides (GMOS) derived from Gleditsia microphylla as a prebiotic on human intestinal bacteria. The β-mannanase used for the enzymatic hydrolysis of GMOS was produced by Trichoderma reesei Rut C-30. The enzymatic hydrolysis of GMOS was found to occur under optimal conditions at 50 °C, pH 5, 20 U/g-GM, and 20 g/L, and resulted in a yield of 70.78% ± 1.34%. The purity of GMOS after purification was 81.50%. Upon performing in vitro human fecal fermentation using GMOS as a carbon source, it was observed that GMOS effectively promoted the proliferation of intestinal bacteria, and the utilization efficiency of GMOS by intestinal bacteria was found to be at 98.40%. In addition, GMOS were found to have a stabilizing effect on intestinal pH. Additionally, 16S rRNA sequencing of GMOS revealed that GMOS significantly affected the diversity of gut microbiota. Specifically, GMOS exhibited a significant inhibitory effect on Fusobacteria at the phyla and genus level, and demonstrated a significant inhibitory effect on Fusobacterium. Moreover, the results for the prediction of metabolic function analysis showed that GMOS had a significant effect on the level two metabolism of carbohydrates, cofactors, and vitamins. Furthermore, during level three metabolism, the lipoic acid metabolism was significantly affected by GMOS. These results provide a theoretical basis for the potential use of galactomannan oligosaccharides from Gleditsia microphylla as prebiotics for regulating human intestinal bacteria.

Herein, we assessed the impact of dietary addition of konjac mannanoligosaccharide (MOS) on the growth, intestinal morphology, serum immune status, and oxidative status in Partridge Shank chickens. For the experiment, one-day-old chicks (n=192) were randomized into six replicates (n=8/replicate) and fed four different diets: a basal diet containing 0 (Control group), 0.5, 1, or 1.5 g MOS per kg of diet (g/kg) for 50 d. Relative to the control, the group fed 0.5 g/kg MOS decreased feed consumption from 22nd to 50th d and 1st to 50th d (P

Abstract Background During the dilute acid pretreatment process, the resulting pseudo-lignin and lignin droplets deposited on the surface of lignocellulose and inhibit the enzymatic digestibility of cellulose in lignocellulose. However, how these lignins interact with cellulase enzymes and then affect enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid-pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by the milled wood lignin (MWL) method. All of the lignin fractions obtained from DAP-BR were used to investigate the mechanism for interaction between lignin and cellulase using surface plasmon resonance (SPR) technology to understand how they affect enzymatic hydrolysis Results The results showed that removing surface lignin significantly decreased the yield for enzymatic hydrolysis DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel inhibited its enzymatic hydrolysis, while different SL samples showed slight increases in enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus SL samples, a stronger affinity for MWL (KD = 6.8–24.7 nM) was found versus that of SL (KD = 39.4–52.6 nM) by SPR analysis. The affinity constants of all tested lignins exhibited good correlations (r > 0.6) with the effects on enzymatic digestibility of extracted DAP-BR and Avicel. Conclusions This work revealed that the surface lignin on DAP-BR is necessary for maintaining enzyme digestibility levels, and its removal has a negative impact on substrate digestibility.

Abstract Background Humic acids (HA) have been used in biorefinery process due to its surfactant properties as an aid to the pretreatment of lignocellulose, with results indicating a positive effect on delignification. However, the HA remaining on the surface of the pretreated lignocellulose has also been shown to provide a negative effect on ensuing enzymatic digestibility. Hence, a strategy of complexing metallic cations with HA prior to enzymatic hydrolysis was proposed and demonstrated in this work in an effort to provide a means of HA mitigation that does not involve significant water consumption via extensive washing. Results Results showed that the enzymatic hydrolysis efficiency of waste wheat straw decreased from 81.9% to 66.1% when it was pretreated by 10 g/L HA, attributed to the inhibition ability of the residual HA on enzyme activity of cellulase with a debasement of 36.3%. Interestingly, enzymatic hydrolysis efficiency could be increased from 66.1% to 77.3% when 10 mM Fe3+ was introduced to the system and allowed to associate with HA during saccharification. Conclusions The addition of high-priced metallic cations (Fe3+) has successfully alleviated the effect of HA on cellulase activity. It is our hope in demonstrating the complexation affinity between metallic cations and HA, future researchers and biorefinery developers will evaluate this strategy as a unit operation that could allow economic biorefining of WWS to produce valuable biochemicals, biofuels, and biomaterials.

Abstract In this study, further research on an enzymatic hydrolysate-ammonium dihydrogen phosphate (EHADP) adhesive was carried out. Appropriate hot pressing conditions were clarified by measuring the bond strength of three-ply plywood bonded with EHADP adhesive, and the results indicated that the appropriate fabricate conditions were 170 °C and 5 min. The value of wet shear strength fulfilled the requirements of China National Standard GB/T 9846–2015 when plywood was fabricated by the appropriate conditions. In the research of curing behavior, the insoluble mass proportion promoted significantly as heating temperature and time were ≥ 170 °C and 5 min. Furthermore, a pyrolysis gas chromatography/mass spectrometry analysis indicated that adding ammonium dihydrogen phosphate (ADP) catalyzed the conversion of monosaccharides in the EHADP adhesive. The adhesion mechanism of the EHADP adhesive was studied by Fourier transform-infrared spectroscopy analysis, and the chemical changes indicated that the adhesion mechanism was attributed to both mechanical and chemical bonding between the wood elements and the cured EHADP adhesive.

Abstract Background The presence of soluble lignin, furfural and hydroxymethylfurfural (HMF) in industrial pre-hydrolysis liquor (PHL) from the pulping process can inhibit its bioconversion into bioethanol and other biochemicals. Although various technologies have been developed to remove these inhibitors, certain amounts of sugars are also inevitably removed during the treatment process. Hence, polystyrene divinylbenzene (PS-DVB) resin was used as an adsorptive material to simultaneously remove fermentation inhibitors while retaining sugars with high yields to improve the fermentability of PHL after acid hydrolysis by enriching its xylose concentration. The fermentability of acid-hydrolyzed PHL (A-PHL) was evaluated by the bioconversion into ethanol and xylosic acid (XA) after treatment with PS-DVB resin. Results The results showed that the highest xylose concentration (101.1 g/L) in PHL could be obtained by acid hydrolysis at 100 °C for 80 min with 4% acid, while the concentration of fermentation inhibitors (furfural, HMF and lignin) in PHL could also be significantly improved during the acid-hydrolysis process. After treatment with PS-DVB resin, not only were 97% of lignin, 92% of furfural, and 97% of HMF removed from A-PHL, but also 96% of xylose was retained for subsequent fermentation. With resin treatment, the fermentability of A-PHL could be improved by 162–282% for ethanol production from A-PHL containing 30–50 g/L xylose and by 18–828% for XA production from A-PHL containing 90–150 g/L xylose. Conclusions These results confirmed that PS-DVB resin can remove inhibitors from PHL before producing value-added products by bioconversion. In addition, this work will ideally provide a concept for producing value-added chemicals from pre-hydrolysis liquor, which is regarded as the waste stream in the pulping process.

Abstract Background Soil-derived exogenous ash (EA) poses a challenge toward lignocellulosic autohydrolysis due to its buffering capacity. Previous works focusing on this phenomenon have failed to also investigate the role that soluble salts, and organic matter plays in this system. Herein, sodium phosphate and sodium humate were employed as model buffering compounds representing soluble salts and organic matter and dosed into a de-ashed wheat straw (DWS) autohydrolysis process to show the potential impacts of WS attached soil conditioners on the WS autohydrolysis efficiency which would further affect the enzymatic digestibility of autohydrolyzed WS. Results Results showed that with the increasing loadings of sodium phosphate and sodium humate resulted in elevated pH values (from 4.0 to 5.1 and from 4.1 to 4.7, respectively). Meanwhile, the reductions of xylan removal yields from ~ 84.3–61.4% to 72.3–53.0% by loading (1–30 g/L) sodium phosphate and sodium humate during WS autohydrolysis lead to a significant decrease of cellulose accessibilities which finally lead to a reduction of the enzymatic digestibility of autohydrolyzed WS from ~ 75.4–77.2% to 47.3–57.7%. Conclusion The existence of different types soil conditioner model compounds results in various component fractions from autohydrolyzed WS in the process of autohydrolysis. A lack of sufficient xylan removal was found to drive the significant decrease in enzymatic accessibility. The results demonstrated the various effects of two typical tested soil conditioners on WS autohydrolysis and enzymatic hydrolysis.

The imaging quality of the synthetic aperture system is sensitive to the positioning accuracy of the sub-aperture primary mirror. A novel flexible mounting structure of bimetallic material is proposed for the athermalization of the sub-aperture primary mirror of the Fizeau Synthetic Aperture Telescope – which is composed of seven sub-aperture. The axial position accuracy of the sub-aperture primary mirror must be less than 5 µm under 10°C temperature rise to meet the requirements of the optical system. Firstly, a single mounting unit is analyzed theoretically, and the initial parameters are determined. The conceptual design of the mounting structure is carried out by using initial parameters. The orthogonal optimization algorithm and range analysis are used to optimize the structural parameters. The finite element model of the flexible mounting structure is established and the coupled thermal-mechanical simulation analysis is performed. Then the thermal sensitivity test of the sub-aperture primary mirror mounting structure was carried out. Under the effect of a temperature rise of 10°C, the axial displacement of the sub-aperture primary mirror mounting surface is less than 3 µm. Finally, the synthetic aperture system is assembled, and the optical test verifies that the synthetic aperture system has good imaging capabilities.

Despite the application as additives to control functional properties of food, little is known about the behavior of Sesbania gum (SG) from Sesbania cannabina seeds, in the gastrointestinal tract. SG is a kind of natural and water-soluble galactomannan consisting of a β-1,4-D-mannan backbone with single α-1,6-galactopyranosyl side branching units every 2.4 residues, mass of which is over 106 Da. Using in vitro human digestion models, we elucidated the molecular weight changes of SG during the digestion and fermentation and the interactions between SG and gut microbiota. The results showed that the molecular weight of SG was not obviously changed during the simulated saliva, gastric and small intestinal digestion, but was rapidly decomposed and consumed by gut microbiota. As revealed by RNA‐seq transcriptome analyses, the CAZyme genes encoded by gut bacteria were significantly up-regulated, especially the families GH5 and 4, which target β-mannopyranoside and α-galactopyranoside, respectively. SG degradation led in turn, to changes in the short-chain fatty acid production and microbiota composition as determined by HPLC and 16S-seq, respectively. Our work is helpful to understand some features of SG subjected to the potential digestion and fermentation, and the results suggest SG has potential to be developed as a functional food ingredient for gut health.

Biomass polyphenols are bio-active macromolecules with distinct chemical structures in a variety of biomass. In recent years, the study of biomass polyphenols and their application in food and medicine fields has become a research hotspot, which predominantly focuses on the preparation, purification, structural identifications, and measurements of biological activities. Many studies describe methodologies for extraction and application of polyphenols, but comprehensive work to review its physiological activities like drugs and health products are lacking. This paper comprehensively unlocks the bioactivities of antioxidant, antibacterial, antitumor, anticancer, neuroprotection, control of blood sugar, regulation of blood fat, and promotion of gastrointestinal health functions of polyphenols from different biomass sources. This review will serve as an illuminating resource for the global scientific community, especially for those who are actively working to promote the advances of the polyphenols research field.

Hydrothermal pretreatment (HTP) has long been considered as an efficient and green treatment process on lignocellulosic biomass for bioconversion. However, the variations of cellulose supramolecular structures during HTP as well as their effects on subsequent enzymatic conversion are less understood. In this work, bamboo holocellulose with well-connected cellulose and hemicelluloses polysaccharides were hydrothermally treated under various temperatures. Chemical, morphological, and crystal structural determinations were performed systematically by a series of advanced characterizations. Xylan was degraded to xylooligosaccharides in the hydrolyzates accompanied by the reduced degree of polymerization for cellulose. Cellulose crystallites were found to swell anisotropically, despite the limited decrystallization by HTP. Hydrogen bond linkages between cellulose molecular chains were weakened due to above chemical and crystal variations, which therefore swelled, loosened, and separated the condensed cellulose microfibrils. Samples after HTP present notably increased surface area, favoring the adsorption and subsequent hydrolysis by cellulase enzymes. A satisfying enzymatic conversion yield (>85%) at rather low cellulase enzyme dosage (10 FPU/g glucan) was obtained, which would indicate new understandings on the green and efficient bioconversion process on lignocellulosic biomass.

ABSTRACT: This study was conducted to investigate the efficacy of incomplete degradation products of galactomannan (IDPG) on the production performance, egg quality, plasma parameters, and lipid metabolites of laying hens. A total of 288 laying hens were allocated into 4 treatments and fed diets supplemented with 0%, 0.01%, 0.025%, and 0.05% IDPG. Results showed that IDPG supplementation significantly increases egg production and decreases feed conversion ratio (P < 0.05). Eggs laid by hens receiving IDPG exhibited higher eggshell strength (P < 0.05). Moreover, IDPG supplementation significantly increased the serum albumin content, and decreased the blood ammonia content as well as triglyceride levels in serum and liver (P < 0.05). Overall, IDPG can be considered as an effective feed additive due to its capacity of improving egg production, increasing plasma protein, and changing lipid metabolism of laying hens.

The utilization of lignin from different lignocellulosic biomass is the hot topic for the biorefinery of biomass. In this paper, magnetic lignin nanoparticles (MLN) were prepared by kraft lignin from bamboo residue and Fe3O4 with different ratios via Mannich reaction. The surface morphology and structure of magnetic lignin were characterized and analyzed by X-ray powder diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy, which confirmed that the MLN were successfully prepared. The performance of MLN adsorbents was evaluated by adsorbing Congo red solution at different initial concentrations and contact times. The results showed that Fe3O4@lignin (1:0.5) had the best adsorption effect on Congo red solution. When the concentration of Congo red reached 0.6 g/L, Fe3O4@lignin (1:0.5) had the best adsorption effect on Congo red, reaching 95.5% in only 30 min. As lignin is modified by Fe3O4, it can be recovered by magnetic substances after adsorption and has good reuse performance. The results of adsorption kinetics and adsorption isotherm showed that except for the adsorption process of Fe3O4@lignin (1:0.5), which is consistent with the chemical adsorption of the multimolecular layer, the adsorption process of other adsorbents is in accordance with the chemical adsorption of the monomolecular layer. In terms of environmental protection and adsorption efficiency, and MLN has become an ideal adsorbent for Congo red dyes due to its simple preparation, superior performance, and convenient recovery.

Abstract Background The acid buffering capacity of high free ash in waste wheat straw (WWS) has been revealed to be a significant hindrance on the efficiency of autohydrolysis pretreatment. Previous researches have mainly relied on washing to eliminate the influence of ash, and the underlying mechanism of the ash influencing was not extensively investigated. Presently, studies have found that cations can destroy the acid buffering capacity of ash through cation exchange. Herein, different cations were applied to presoak WWS with the aim to overcome the negative effects of ash on autohydrolysis efficiency, further improving its enzymatic digestibility. Results Results showed that cations can be adsorbed on the surface of the material by electrostatic adsorption to change the acid buffering capacity of WWS. The acid buffering capacity of 120 mM Fe2+ presoaked WWS is reduced from 226.3 mmol/pH-kg of original WWS to 79.3 mmol/pH-kg. This reduced the autohydrolysis pretreatment medium pH from 5.7 to 3.8 and promoted the removal of xylan from 61.7 to 83.7%. In addition, the enzymatic digestibility of WWS was enhanced from 49.7 to 86.3% by presoaking with 120 mM Fe2+ solution. The relationship between enzymatic accessibility and hydrophobicity with enzymatic digestibility of the autohydrolyzed WWS was analyzed. Conclusions The results showed that the acid buffering capacity of the high free ash was detrimental for the autohydrolysis efficiency of WWS. After WWS was presoaked with different cations, the acid buffering capacity of ash was weakened by cation exchange and electrostatic adsorption, which improved the autohydrolysis efficiency. The results expound that the enzymatic digestibility of WWS can be enhanced through presoaking to reduce the ash-influencing effect on autohydrolysis.

Abstract Background Prehydrolyzate, which is from the prehydrolysis process in dissolving pulps industry, contains various sugar-derived and lignin compounds such as xylooligosaccharides (XOS), gluco-oligosaccharides, xylose, glucose, and soluble lignin (S-L). The XOS has several beneficial effects on human physiology. XOS and S-L in prehydrolyzate are difficult to efficiently fractionate due to their similar molecular weights and water solubility. In this work, we proposed a sustainable and green process using polystyrene divinylbenzene (PS-DVB) resin to simultaneously separate and recover XOS and S-L. Enzymatic hydrolysis with endo-1,4-β-xylanase and fermentation with P. stipites were sequentially applied to purify XOS to minimize xylose content as well as amplify contents of xylobiose and xylotriose. In addition, 2D-HSQC NMR was used to analyze the structural characteristics of XOS and S-L. Furthermore, the biological abilities of antioxidants and prebiotics of these fractions were investigated by scavenging radicals and cultivating intestinally beneficial bacterias, respectively. Results Results showed that PS-DVB resin could simultaneously separate XOS and solubilized lignin with excellent yields of 93.2% and 85.3%, respectively. The obtained XOS after being purified by enzymatic hydrolysis and fermentation contained 57.7% of xylobiose and xylotriose. 10.4% amount of inherent xylan was found in the S-L fraction obtained by PS-DVB resin separation. 2D-HSQC NMR revealed that lignin carbohydrate complexes existed in both XOS and S-L as covalent linkages between lignin and 4-O-methylglucuronoarabinoxylan. The biological application results showed that the antioxidant capacity of S-L was stronger than XOS, while XOS was superior in promoting growth of intestinal Bifidobacteria adolescentis and stimulating production of short-chain fatty acids by Lactobacillus acidophilus. Conclusions The proposed strategy of sequentially combining hydrophobic resin separation, enzymatic hydrolysis, and fermentation was successfully demonstrated and resulted in simultaneous production of high-quality XOS and solubilized lignin. These biomass-derived products in prehydrolyzate can be regarded as value-adding prebiotics and antioxidants.

Abstract Background The presence of lignin normally affects enzymatic saccharification of lignocellulose detrimentally. However, positive effects of lignin on enzymatic hydrolysis have been recently reported. Enzyme–lignin interactions could be the key to reveal the underlying mechanism of their discrepant behaviors. In this study, to elucidate the positive effects of extractable lignin (EL) on enzymatic hydrolysis of ethanol organosolv-pretreated wood sawdust, two lignin fractions, EL and milled wood lignin (MWL), were isolated sequentially from pretreated substrates. Quartz crystal microbalance with dissipation (QCM-D) was then used to investigate the lignin aggregation effects on enzyme adsorption. Results We found that both EL and MWL had a narrow molecular weight distribution. However, MWL had an obviously higher molecular weight than EL. This indicated that EL and MWL likely represent two distinct lignin fractions from ethanol organosolv-pretreated substrates. HSQC NMR analysis revealed that less β-O-4, β-β, and β-5 linkages and a higher S/G ratio was present in EL, as compared to MWL. QCM-D analysis showed that the enzyme adsorption on lignin was highly relevant to these lignin structural characteristics. An obviously lower maximum enzyme adsorption capacity was observed on EL films (152.63–168.09 ng/cm2) compared to MWL films (196.71–224.73 ng/cm2). Furthermore, enzyme desorption on lignin films was determined. A significantly lower irreversible enzyme adsorption was observed on EL (75.40 ng/cm2) compared to MWL (137.35 ng/cm2). More importantly, two reconstructed lignin films were designed to investigate lignin assembly on enzyme adsorption. The results indicated that the presence of EL reduced irreversible enzyme adsorption on the reconstructed lignin films by 39.2–45.0%. Conclusions Lignin structure determined the interaction between enzyme and lignins. A positive correlation was observed between molecular weight, the content of β-5 linkages, and enzyme adsorption on lignin. EL, which was more depolymerized and less condensed, had the lower enzyme adsorption of the two preparations tested. Additionally, the presence of EL reduced enzyme adsorption on reconstructed lignin films, perhaps through a mechanism involving the blocking of non-productive enzyme binding sites on the MWL. This could be the mechanism for the positive effects of EL on enzymatic hydrolysis.

As known, the nutritional status affects antioxidant capacity and immunity, ultimately affecting the body’s health. Recently, hemicellulosic polysaccharides of galactomannan in different biomass and their degradation products are gaining more attention due to excellent antioxidant enhancement and immunomodulatory activity. Herein, incomplete degradation products of galactomannan (IDPG) were prepared from the enzymatic hydrolysis of Sesbania cannabina seeds, followed by the in vitro and in vivo experiments. Using an H2O2-injured RAW264.7 cells model, IDPG was demonstrated to have antioxidant capacity, as indicated by superoxide dismutase (SOD) activity and malondialdehyde (MDA) content. While in the evaluation in laying hens (68-weeks-old), diets were supplemented with 0, 0.01, 0.025, and 0.05% IDPG for 8 weeks, respectively. Our results showed that IDPG can improve antioxidant capacity by increasing antioxidants contents and reducing MDA content. Furthermore, IDPG can increase immunoglobulins and cytokines secretion, thereby enhancing the immunity of laying hens. This result was further demonstrated by in vitro experiment, in which IDPG significantly increased the secretion of nitric oxide (NO), tumor necrosis factor-α (TNF-α), interleukin 6 (IL-6), and toll-like receptor 4 (TLR4) in RAW264.7 cells (P < 0.05). Overall, IDPG can improve antioxidant function and modulate immunological response, thereby the concept of using IDPG for health may gain a little more credibility.

Partially deacetylated α-chitin nanofibers/nanowhiskers mixtures (DEChNs) were prepared by 35% sodium hydroxide (NaOH) treatment followed by disintegration in water at pH 3–4. The aim of this study was to investigate the hypolipidemic effects of DEChNs at different dosage levels in male Kunming mice. The male mice were randomly separated into five groups, that is, a normal diet group, a high-fat diet group, and three DEChN groups that were treated with different doses of DEChN dispersions (L: low dose, M: medium dose, H: high dose). Primarily, the DEChNs significantly decreased body weight (BW) gain and adipose tissue weight (ATW) gain of mice. Meanwhile, the decreasing extent of weight ratios between ATW and BW was dependent on the dose of DEChNs. Moreover, the DEChNs prevented an increase in plasma lipids (cholesterol and triacylglycerol) in mice when they were fed a high-fat diet. Histopathological examination of hepatocytes revealed that the DEChNs were effective in decreasing the accumulation of lipids in the liver and preventing the development of a fatty liver. The results suggested that the DEChNs reduced the absorption of dietary fat and cholesterol in vivo and could effectively reduce hypercholesterolemia in mice.

Abstract Background In industries lipolytic reactions occur in insensitive conditions such as high temperature thus novel stout esterases with unique properties are attracts to the industrial application. Protein engineering is the tool to obtain desirable characters of enzymes. A novel esterase gene was isolated from South China Sea and subjected to a random mutagenesis and site directed mutagenesis for higher activity and thermo-stability compared to wild type. Results A novel esterase showed the highest hydrolytic activity against p-nitrophenyl acetate (pNPA, C2) and the optimal activity at 40 °C and pH 8.5. It was a cold-adapted enzyme and retained approximately 40% of its maximum activity at 0 °C. A mutant, with higher activity and thermo-stability was obtained by random mutagenesis. Kinetic analysis indicated that the mutant Val29Ala/Tyr193Cys shown 43.5% decrease in K m , 2.6-fold increase in K cat , and 4.7-fold increase in K cat /K m relative to the wild type. Single mutants V29A and Y193C were constructed and their kinetic parameters were measured. The results showed that the values of K m , K cat , and K cat /K m of V29A were similar to those of the wild type while Y193C showed 52.7% decrease in K m , 2.7-fold increase in K cat , and 5.6-fold increase in K cat /K m compared with the wild type. The 3-D structure and docking analysis revealed that the replacement of Tyr by Cys could enlarge the binding pocket. Moreover Y193C also showed a better thermo-stability for the reason its higher hydrophobicity and retained 67% relative activity after incubation for 3 h at 50 °C. Conclusions The superior quality of modified esterase suggested it has great potential application in extreme conditions and the mutational work recommended that important information for the study of esterase structure and function.

Xylose rich of lignocellulosic prehydrolysate could be used for fungal chitosan production effectively by Rhizopus oryzae. When 15 g/L xylose was used as carbon source for R. oryzae AS 3.819 fermentation, almost all of the xylose was consumed for cell growth (4.33 g/L of biomass) and the chitosan extraction yield was 0.11 g/g biomass. Corn stover prehydrolysate by dilute acid-assisted steam explosion pretreatment that contained 30 g/L xylose and 10 g/L glucose was fermented by R. oryzae AS 3.819 for 72 h, the biomass and the chitosan extraction yield were 10.96 g/L and 0.09 g/g biomass. The degree of deacetylation of the fungal chitosan derived from corn stover prehydrolysate (91.27%) was higher than that of the commercial chitosan extracted from natural shellfish exoskeleton (87.25%), and the viscosity of the fungal chitosan derived from corn stover prehydrolysate (2.67 mPa⋅s) had a large decrease compared to the commercial chitosan (22.25 mPa⋅s). The functional groups and thermostability of the fungal chitosan were proofed by Infrared (IR) spectra and Derivative thermogravimetric (DTG), respectively.

Abstract Background Lignin typically inhibits enzymatic hydrolysis of cellulosic biomass, but certain organosolv lignins or lignosulfonates enhance enzymatic hydrolysis. The hydrophobic and electrostatic interactions between lignin and cellulases play critical roles in the enzymatic hydrolysis process. However, how to incorporate these two interactions into the consideration of lignin effects has not been investigated. Results We examined the physicochemical properties and the structures of ethanol organosolv lignins (EOL) from hardwood and softwood and ascertained the association between lignin properties and their inhibitory and stimulatory effects on enzymatic hydrolysis. The zeta potential and hydrophobicity of EOL lignin samples, isolated from organosolv pretreatment of cottonwood (CW), black willow (BW), aspen (AS), eucalyptus (EH), and loblolly pine (LP), were determined and correlated with their effects on enzymatic hydrolysis of Avicel. EOLs from CW, BW, and AS improved the 72 h hydrolysis yield by 8–12%, while EOLs from EH and LP decreased the 72 h hydrolysis yield by 6 and 16%, respectively. The results showed a strong correlation between the 72 h hydrolysis yield with hydrophobicity and zeta potential. The correlation indicated that the hydrophobicity of EOL had a negative effect and the negative zeta potential of EOL had a positive effect. HSQC NMR spectra showed that β-O-4 linkages in lignin react with ethanol to form an α-ethoxylated β-O-4ʹ substructure (Aʹ) during organosolv pretreatment. Considerable amounts of C2,6–H2,6 correlation in p-hydroxybenzoate (PB) units were observed for EOL–CW, EOL–BW, and EOL–AS, but not for EOL–EH and EOL–LP. Conclusions This study revealed that the effect of lignin on enzymatic hydrolysis is a function of both hydrophobic interactions and electrostatic repulsions. The lignin inhibition is controlled by lignin hydrophobicity and the lignin stimulation is governed by the negative zeta potential. The net effect of lignin depends on the combined influence of hydrophobicity and zeta potential. This study has potential implications in biomass pretreatment for the reduction of lignin inhibition by increasing lignin negative zeta potential and decreasing hydrophobicity.

Itaconic acid production by Aspergillus terreus (A. terreus) was investigated using the undetoxified enzymatic hydrolysate of steam-exploded corn stover as the sole carbon source. The fermentation conditions for A. terreus were optimized based on glucose as the carbon source. Unfortunately, wild-type A. terreus did not grow in the undetoxified enzymatic hydrolysate. Therefore, atmospheric and room temperature plasma (ARTP) mutagenesis was applied to obtain A. terreus mutant AT-90. A. terreus mutant AT-90 grew and secreted itaconic acid in the undetoxified enzymatic hydrolysate. The highest itaconic acid concentration (19.30 g/L) with a yield of 36.01% was obtained from the undetoxified enzymatic hydrolysate of 10% (w/v) steam-exploded corn stover. This work demonstrated that the A. terreus mutant generated by ARTP efficiently improved itaconic acid production from lignocellulose-based carbon source.

Production of fumaric acid from xylo-oligosaccharides manufacturing waste residue (XOR) by Rhizopus oryzae CICC 40351 was investigated in a simultaneous saccharification and fermentation (SSF) process. The fermentation conditions for SSF were optimized by an orthogonal design method to maximize the fumaric acid concentration. The highest fumaric acid concentration (12.54 g/L) was reached with a substrate loading of 5% (w/v) XOR in the SSF process at 38 °C. The fumaric acid concentration of the SSF process was 1.8 times greater than that of the separate hydrolysis and fermentation (SHF) process under the same conditions. In addition, the SSF process yielded 0.34 g/g of glucose, whereas the SHF process yielded only 0.20 g/g of glucose. The results indicated that the SSF process notably improved the production of fumaric acid from lignocellulose by R. oryzae.

During pretreatment, the pretreatment pH often plays an important role in removing hemicelluloses and lignin for improving the conversion of biomass to sugars. In this study, corn stover was subjected to magnesium bisulfite pretreatment (MBSP) under various pH conditions. The obtained data showed that the hemicelluloses and lignin were solubilized by MBSP, which led to changes in the structural and chemical properties of the pretreated material. The pretreatment pH could alter the existing forms of SO2, and magnesium bisulfite was the most effective reagent for removing lignin. A relatively neutral MBSP (pH 5.13) not only considerably improved the enzymatic hydrolysis yield (80.18%), but also produced a large amount of high-value xylo-oligosaccharides in the spent liquor. Furthermore, only the hemicellulose removal showed a linear relationship with the enzymatic hydrolysis yield. These results suggest that removal of all the lignin might not be necessary to improve the hydrolysis efficiency.

The inhibitors derived from degradation of lignocellulose have adverse impacts on fermentation, which is considered to be a fundamental problem in bioethanol production. Fermentation of steam-exploded corn stover prehydrolyzate by Pichia stipitis showed that phenolic compounds had much higher inhibitory effects than weak acids and furan at high fermentation pH. Two types of organobentonite (cetyltrimethylammonium (CTMA)- and benzyltrimethylammonium (BTMA)-modified bentonite) were used to remove phenolic compounds in prehydrolyzate. The effectiveness of organobentonite treatment was evaluated by ethanol fermentation, which indicated that the organobentonite treatment improved the fermentability substantially, even though a noticeable difference was found in the phenol removal by the two organobentonites. Without organobentonite treatment, the sugar utilization ratio was only 68.1%, and the produced ethanol was 15.36 g/L. After CTMA- and BTMA-bentonite treatment, the sugar utilization ratios were beyond 95%; meanwhile, the ethanol production increased by 45.5% and 42.8%, respectively. This indicated that organobentonite treatment was a potential detoxification method.

In this study, a further investigation was carried out on the synthesis mechanism, optimal manufacturing conditions, and curing behavior of a sucrose-ammonium dihydrogen phosphate (SADP) adhesive. The results of 13C nuclear magnetic resonance (NMR) spectroscopy confirmed that SADP was composed of 5-hydroxymethylfurfural (5-HMF), deoxyfructosazine (DOF), amino compounds, Schiff base, monosaccharides, and oligosaccharide. The optimal hot-pressing conditions were a hot-pressing temperature of 170 °C, a hot-pressing time of 7 min, and a spread rate of 120 g/m2. The wet shear strength of plywood bonded at optimal manufacturing conditions met the requirements of China National Standard (GB/T 9846-2015). Thermal analysis and insoluble mass proportion measurements showed that the main curing behavior of the SADP adhesive occurred at curing temperatures higher than 145 °C, and more than 50% insoluble mass was formed when the heating time was longer than 5 min. Fourier-transform infrared spectroscopy (FT-IR) indicated that cross-linking of the cured adhesive was promoted by prolonging the heating time. In addition, pyrolysis gas chromatography and mass spectrometry (Py-GC/MS) confirmed that the cured SADP adhesive was composed of furan and nitrogen-containing compounds.

Background: Previous data are controversial about the association of renal artery stenosis (RAS) with clinical outcome in patients with heart failure. Definition of RAS in previous studies might not be appropriate. By definition of RAS with renal duplex sonography, we investigated the association of RAS with clinical outcome in patients with heart failure. Methods: In this retrospective study, we identified 164 patients with heart failure (New York Heart Association classification ≥II; left ventricular ejection fraction

In this work, kraft pulping was carried out on moso bamboo residues as a pretreatment and its impact on the chemical compositions and the digestibility of the sample was investigated. Meanwhile, steam explosion and sulfuric acid pretreatments were also carried out on the sample to determine their impacts on enzymatic saccharification. Results showed that kraft pulping pretreatment removed a significant amount of lignin from the sample, and its enzymatic saccharification was enhanced. Approximately 95% of the lignin was removed with the optimized kraft pulping pretreatment (26% effective alkali charge, 24% sulfidity, 160 °C, and 70 min cooking time). Consequently, about 79% and 77% yields of glucan and xylan, respectively, were achieved with enzymatic saccharification from the pretreated sample. As a result, 352 g, 128 g, and 88 g sugars were generated from 1000 g of samples pretreated by kraft pulping, steam explosion, and sulfuric acid, respectively. The results suggested that kraft pulping can be a remarkably effective pretreatment applied on moso bamboo residues (i.e., lignin-rich biomass) for sugars released, compared to steam explosion and sulfuric acid pretreatment.

Green liquor pretreatments and different liquid-fermentation strategies were tested to establish an effective ethanol production process from corn stover. After pretreatment and enzymatic hydrolysis, 329.7 g of glucose and 126.3 g of xylose were obtained from 1,000 g of dry corn stover. The primary aim of this work was to test the fermentability of the enzymatic hydrolysate of green liquor-pretreated corn stover, for no fermentation has been done on the enzymatic hydrolysate of green liquor-pretreated corn stover before. Three liquid-fermentation strategies, including sequential fermentation, co-fermentation, and co-culture, were carried out and compared to select an appropriate fermentation strategy from green liquor-pretreated corn stover. Among the different liquid-fermentation strategies, sequential fermentation yielded the highest ethanol production (210.7 g ethanol/1,000 g corn stover). Using the sequential fermentation strategy, glucose fermentation by Saccharomyces cerevisiae and ethanol distillation was completed prior to xylose fermentation by Pichia stipitis, so that the separate utilization of glucose and xylose ensured that each fermentation stage used the suitable microorganism, permitting high ethanol yields. Sequential fermentation was thus considered to be the most promising liquid-fermentation strategy for ethanol production from green liquor-pretreated corn stover.

An effective strategy for sugar production from corn stover was established through a combination of green liquor pretreatment (8% total titratable alkali charge, 40% sulfidity, 140 °C, and 1 h) and enzymatic hydrolysis with a specialized enzyme cocktail. Green liquor pretreatment was demonstrated as an effective first step for sugar production due to the selective removal of lignin (39.70%), high carbohydrate recovery yield (81.53%), and obvious enhancement of enzymatic hydrolysis after pretreatment. When a specialized enzyme cocktail (cellulase, β-glucosidase, and xylanase at a ratio of 1:1.88:6.61, supplemented with 0.05 g of PEG 6000 per g of glucan) was applied, near-theoretical hydrolysis yield was achieved (glucan hydrolysis yield of 93.53% and xylan hydrolysis yield of 86.00%). A total fermentable sugar production of 50.14 g was obtained per 100 g of dry corn stover, including 36.08 g of glucose and 14.06 g of xylose.

The development of eco-friendly adhesives for wood composite products has been a major topic in the field of wood science and product engineering. Although the research on tannin-based and soybean protein-based adhesives has already reached, or at least nears, industrial implementation, we also face a variety of remaining challenges with regards to the push for sustainable adhesives. First, petroleum-derived substances remain a pre-requisite for utilization of said adhesive systems, and also the viscosity of these novel adhesives continues to limit its ability to serve as a drop-in substitute. Within this study, we focus upon the development of an eco-friendly plywood adhesive that does not require any addition of petroleum derived reagents, and the resultant liquid adhesive has both high solid contents as well as a manageably low viscosity at processing temperatures. Specifically, a system based on sucrose and ammonium dihydrogen phosphate (ADP) was synthesized into an adhesive with ~80% solid content and with viscosities ranging from 480−1270 mPa·s. The bonding performance of all adhesive-bound veneer specimens satisfied GB/T 9846-2015 standard at 170 °C hot pressing temperature. To better explain the system’s efficiency, in-depth chemical analysis was performed in an effort to understand the chemical makeup of the cured adhesives as well as the components over the time course of curing. Several new structures involving the fixation of nitrogen speak to a novel adhesive molecular network. This research provides a possibility of synthesizing an eco-friendly wood adhesive with a high solid content and a low viscosity by renewable materials, and this novel adhesive system has the potential to be widely utilized in the wood industry.

Mannanoligosaccharides (MOS) can be used in poultry production to modulate immunity and improve growth performance. So, we hypothesized that our enzymatic MOS could achieve the same effects in broilers. To investigate this, a total of 192 one-day-old Partridge Shank chickens were allocated to four dietary treatments consisting of six replicates with eight chicks per replicate, and they were fed a basal diet supplemented with 0, 0.5, 1 and 1.5 g MOS per kg of diet(g/kg) for42 days. Treatments did not affect the growth performance of chickens. Dietary MOS linearly increased the relative weight of the bursa of Fabricius and jejunal immunoglobulin M (IgM) and immunoglobulin G (IgG) content, whereas it linearly decreased cecal Salmonella colonies at 21 days (p < 0.05). The concentration of jejunal secretory immunoglobulin A (sIgA) and IgG at 42 days as well as ileal sIgA, IgG, and IgM at 21 and 42 days were quadratically enhanced by MOS supplementation (p < 0.05). Also, chickens fed MOS exhibited linear and quadratic reduction in jejunal malondialdehyde (MDA) accumulation (p < 0.05). In conclusion, this enzymatic MOS can improve the immune function and intestinal oxidative status of Partridge Shank chickens.

Fluorescence sensors prepared from natural polymers have received increasing attention based on their luminescence characteristics for bioimaging, cell imaging, and intracellular detection of inorganic metabolites. In this work, flavonoids isolated from bamboo residues (BRF) were applied as fluorescence sensors for different metal cations’ detection in vitro. Results showed the optimal flavonoids extraction condition of solid to liquid ratio, ethanol concentration, extraction time and temperature were determined at 1:25, 50%, 240 min and 90 °C, respectively, resulting in an extraction yield with 104.7 mg/100 g bamboo residues. The BRF is mainly composed of isoorientin, isovitexin, pinosylvin, tricin and isorhamnetin by liquid chromatography−mass spectrometry (LC-MS) analysis. It is found that the BRF displayed strong blue-green emission as well as notable excitation, which can selectively and sensitively detect Fe3+ with the limit of detection (LOD) as low as 38.0 nM. In the Fe3+ detection was no obvious interference by other cations except for Al3+. In addition, the BRF displayed excellent biocompatibility that can be applied to bioimages of the intracellular detection of Fe3+ in L02 cells. Finally, it is found that the BRF possessed significant antioxidant properties in scavenging H2O2-induced endogenous reactive oxygen species (ROS) in a zebrafish module (in vivo) and L02 cells (in vitro). These results showed that the flavonoid products sustainably isolated from an abundant lignocellulosic waste appear to be effective fluorescent sensors for Fe3+ detection in biological systems with excellent biocompatibility and antioxidant activity.

The carbon quantum dot (CQD), a fluorescent carbon nanoparticle, has attracted considerable interest due to its photoluminescent property and promising applications in cell imaging and bioimaging. In this work, biocompatible, photostable, and sustainably sourced CQDs were synthesized from byproducts derived from a biorefinery process using one-pot hydrothermal treatment. The main components of byproducts were the degradation products (autohydrolyzate) of biomass pretreated by autohydrolysis. The as-synthesized CQDs had a size distribution from 2.0–6.0 nm and had high percentage of sp2 and sp3 carbon groups. The CQDs showed blue-green fluorescence with a quantum yield of ~13%, and the fluorescence behaviors were found to be stable with strong resistance to photobleaching and temperature change. In addition, it is found that the as-synthesized CQDs could be used for imaging of cells and tumors, which show potential applications in bioimaging and related fields such as phototherapy and imaging.

Galactomannan, a water-soluble polymer in the cell wall of leguminous plants, has been proven to possess anticancer and antioxidative activity. In this work, galactomannan with different molecular weights (GM-40 and GM-65) was obtained from Sesbania seeds and synthesized into galactomannan–iron(III) complexes, which are termed as GM-40-Fe and GM-65-Fe, respectively. These galactomannan–iron(III) complexes are intended to function as organic iron supplements to treat iron deficiency with the added benefit of antioxidative activity. The prepared galactomannan–iron(III) complexes were characterized for chemical composition, morphology, antioxidant capacity, and bioavailability in vitro. The results showed that galactomannan–iron(III) complexes could be produced with iron contents as high as 65.4 mg/g. Antioxidant assays indicated that both GM-40-Fe and GM-65-Fe exhibited antioxidant activities for scavenging radicals in vitro. The iron release/bioavailability assays showed that the iron was easily released into artificial gastric and intestinal juices, resulting in iron release rates of 88–94% over 300 min. These results suggest that galactomannan–iron(III) complexes synthesized from Sesbania seed polysaccharides are capable of being administered as organic iron supplements to patients with iron deficiency.

An inhibitor-tolerance strain, Bacillus coagulans GKN316, was developed through atmospheric and room temperature plasma (ARTP) mutation and evolution experiment in condensed dilute-acid hydrolysate (CDH) of corn stover. The fermentabilities of other hydrolysates with B. coagulans GKN316 and the parental strain B. coagulans NL01 were assessed. When using condensed acid-catalyzed steam-exploded hydrolysate (CASEH), condensed acid-catalyzed liquid hot water hydrolysate (CALH) and condensed acid-catalyzed sulfite hydrolysate (CASH) as substrates, the concentration of lactic acid reached 45.39, 16.83, and 18.71 g/L by B. coagulans GKN316, respectively. But for B. coagulans NL01, only CASEH could be directly fermented to produce 15.47 g/L lactic acid. The individual inhibitory effect of furfural, 5-hydroxymethylfurfural (HMF), vanillin, syringaldehyde and p-hydroxybenzaldehyde (pHBal) on xylose utilization by B. coagulans GKN316 was also studied. The strain B. coagulans GKN316 could effectively convert these toxic inhibitors to the less toxic corresponding alcohols in situ. These results suggested that B. coagulans GKN316 was well suited to production of lactic acid from undetoxified lignocellulosic hydrolysates.

This study investigated the effect of oxygen plasma treatment on the glass transition temperature of enzymatic hydrolysis lignin (EHL) derived from the production of bio-ethanol. Differential scanning calorimetry (DSC) was used to obtain the glass transition temperature (Tg) of EHL. The results showed that the Tg value of EHL under different heating rates ranged from 160 to 200 °C, and there was a strong linear correlation between heating rate and Tg. The Tg value of oxygen plasma treated EHL decreased when compared with the untreated samples. The apparent Tg of the untreated sample was 168.2 °C, while the value of the treated sample was 161.5 °C. Distinct chain scission and introduction of oxygen-based functional groups on the surface of EHL were detected by XPS analysis. These changes may occur mainly on the bulky side chain and thus enhance molecular mobility of EHL. This indicates that oxygen plasma treatment can modify the structure and improve the reactivity of EHL efficiently.

A method for simultaneous separation and quantitative determination of arabinose, galactose, glucose, xylose, xylonic acid, gluconic acid, galacturonic acid, and glucuronic acid was developed by using high performance anion-exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD). The separation was performed on a CarboPacTM PA-10 column (250 mm × 2 mm) with a various gradient elution of NaOH-NaOAc solution as the mobile phase. The calibration curves showed good linearity (R2 ≥ 0.9993) for the monosaccharides, uronic acids, and aldonic acids in the range of 0.1 to 12.5 mg/L. The detection limits (LODs) and the quantification limits (LOQs) were 4.91 to 18.75 μg/L and 16.36 to 62.50 μg/L, respectively. Relative standard deviations (RSDs) of the retention times and peak areas for the seven consecutive determinations of an unknown amount of mixture were 0.15% to 0.44% and 0.22% to 2.31%, respectively. The established method was used to separate and determine four monosaccharides, two uronic acids, and two aldonic acids in the prehydrolysate from dilute acid steam-exploded corn stover within 21 min. The spiked recoveries of monosaccharides, uronic acids, and aldonic acids ranged from 91.25% to 108.81%, with RSDs (n=3) of 0.04% ~ 6.07%. This method was applied to evaluate the quantitative variation of sugar and sugar acid content in biomass prehydrolysates.

Lignosulfonate (LG), a water-soluble polymer from sulfite pulping process of lignocellulosic biomass, has been commercially applied as admixture for concrete. In this work, lignosulfonates were produced from alkaline lignin (AL) and enzymatic hydrolysis residue (EHR) by sulfomethylation and these lignosulfonates as water reducers for concrete were then evaluated. Results showed that 94.9% and 68.9% of lignins in AL and EHR could be sulfonated under optimum sulfomethylation conditions, respectively. The sulfonic groups in lignosulfonates from AL (AL-LG) and EHR (EHR-LG) were 1.6 mmol/g and 1.0 mmol/g, respectively. Surface tension and zeta potential analysis indicated that both AL-LG and EHR-LG can be potentially used to as dispersant for improving the fluidity of the cement paste, similarly to commercial lignosulfonate (CM-LG). Adding 0.2 wt % of AL-LG, EHR-LG, and CM-LG in the concrete, the compressive strength (28 days) of concretes increased from 38.4 Mpa to 41.6, 42.6, and 40.9 Mpa, respectively. These findings suggest that the lignosulfonate from biorefinery lignin by sulfomethylation can meet the industrial standards as water reducers for cement admixtures.

The development of biomaterials-based adhesives is one of the main research directions for the wood-based material industry. In previous research, tannin and sucrose were used as adhesive to manufacture particleboard. However, the reaction conditions need to be optimized. In this study, sulfuric acid was added to the tannin–sucrose adhesive as a catalyst to improve the curing process. Thermal analysis, insoluble mass proportion, FT-IR, and solid state 13C NMR were used to investigate the effects of sulfuric acid on the curing behavior of tannin and sucrose. Thermal analysis showed weight loss and endotherm temperature reduced from 205 and 215 to 136 and 138 °C, respectively, by adding sulfuric acid. In case of the adhesive with pH = 1.0, the insoluble mass proportion achieved 81% at 160 °C, which was higher than the reference at 220 °C. FT-IR analysis of the uncured adhesives showed that adding sulfuric acid leads to hydrolysis of sucrose; then, glucose and fructose converted to 5-hydroxymehthylfurfural (HMF) and levulinic acid. Dimethylene ether bridges were observed by FT-IR analysis of the cured adhesives. The results of solid state 13C NMR spectrum indicated that 5-HMF participated in the curing process and formed methylene bridges with the C8 position of the resorcinol A-rings of tannin, whereas dimethylene ether bridges were detected as a major chemical chain of the polymer. Lab particleboards were produced using 20 wt % resin content at 180 °C and 10 min press time; the tannin–sucrose adhesive modified with sulfuric acid to pH = 1.0 exhibited better performance than the unmodified tannin–sucrose adhesive; the properties of the boards fulfilled the requirement of Japanese Industrial Standard (JIS) A5908 type 15.