Search

TiO2-based nanosheets (TNS) modified with Fe2O3 and Y2O3 particles (Fe2O3/Y2O3@TNS), possessing a laminar structure with large specific surface area of 382 m2 g−1, were synthesized via a one-pot hydrothermal method. The optimized Fe2O3/Y2O3@TNS (Fe/Y/Ti = 0.1 at%: 0.75 at%: 1) exhibited high photocatalytic efficiency due to the synergistic effect, and the photodegradation rate towards RhB and K2Cr2O7 solutions were 5.82-fold and 2.35-fold higher, respectively, as compared to TNS under visible light. Simultaneous photocatalytic degradation in the Cr(VI)–phenol coexisting system revealed that there was synergism between Cr(VI) reduction and phenol degradation for promoting photocatalytic efficiency. Besides, Fe2O3/Y2O3@TNS demonstrated strong adsorption and excellent photocatalytic regeneration performance for high-chroma crystal violet (CV), showing potential application in the removal of organic or inorganic pollutants. Based on photoluminescence (PL) spectra and photocurrent (SPC) methodology, the separation efficiency of photogenerated e−–h+ pairs could be significantly strengthened. A possible mechanism for enhanced photocatalytic efficiency under visible light was proposed. [ABSTRACT FROM AUTHOR]

The inverse problem of electrical impedance tomography (EIT) is seriously ill-posed, which restricts the clinical application of EIT. Regularization is an important numerical method to improve the stability of the EIT inverse problem as well as the resolution of the imaging. This paper proposes a self-diagnosis regularization method based on Tikhonov regularization and diagonal weight regularization method (DWRM). Firstly, the ill-posedness of the inverse problem is analyzed by sensitivity. Then, the performance of the self-diagnosis regularization is analyzed through the singular value theory. Finally, some simulated experiments including simulations and flume experiment are carried out and verify that the self-diagnosis regularization has better image quality and anti-noise ability than those of traditional regularization methods. The self-diagnosis regularization method weakens the ill-posedness of inverse problem of EIT and can prompt the practical application of EIT.

Ag and graphene co-sensitized TiO 2 composites were successfully fabricated and used as photoanodes for photogenerated cathodic protection of 304 stainless steel (304SS) under visible light. Graphene films was firstly deposited onto the TiO 2 nanotube (NT) films via cyclic voltammetric electrodeposition. Ag/graphene/TiO 2 films were then fabricated via dipping and photoreduction method. The morphology, composition and optical response of the Ag/graphene/TiO 2 NT composites were characterized by scanning electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, UV-vis diffusion reflectance spectroscopy, respectively. The photocathodic protection performance of the Ag/graphene/TiO 2 composites were systematically studied through open-circuit potential and potentiodynamic polarization measurements in 3.5 wt% NaCl solution under visible light (λ > 400 nm). The composites exhibited enhanced photogenerated cathodic protection performance for 304SS under visible light irradiation compared to pure TiO 2 . Graphene and Ag have a synergistic effect on the enhancement of photocathodic protection performance of TiO 2 . The composites prepared with 30-cycle graphene film and 15 mM AgNO 3 solution showed the optimal corrosion protection performance.