Search

The article investigates an algorithm for identifying an unknown constant parameter for a scalar regression model using a nonlinear operator that allows us to obtain a new regression equation (with an expanded number of unknown parameters) for which the influence of interference in measurement or disturbance will be minimal., Comment: in Russian language

The article is devoted to the problem of synthesis of observers of state variables for linear stationary objects operating under conditions of noise or disturbances in the measurement channel. The paper considers a fully observable linear stationary system with known parameters. It is assumed that the state variables are not measured, and the measured output variable contains a small amplitude (in general, modulo less than one) additive noise or disturbance. It is also assumed that there is no a priori information about the disturbance or noise in the measurement channel (for example, frequency spectrum, covariance, etc.). It is well known that a large number of methods of observer synthesis have been obtained for this type of objects, including the Kalman filter, which has proven itself in practice. Under the condition of complete observability and the presence of some a priori information about the process (which is typical for the case when a disturbance in the measurement channel can be represented as white noise), approaches based on Kalman filtering demonstrate the highest quality of convergence of estimates of state variables to true values. Without taking into account the numerous results obtained using the application of the Kalman filter, an alternative idea of constructing an observer of state variables is considered in this paper. The alternative of the new approach is primarily due to the fact that there is no need to use the usual approaches based on the Luenberger observer. The paper proposes an approach based on the evaluation of unknown parameters (in this case, an unknown vector of initial conditions of the variables of the object state) of a linear regression model., Comment: in Russian language

In this paper we provide the first solution to the challenging problem of designing a globally exponentially convergent estimator for the parameters of the standard model of a continuous stirred tank reactor. Because of the presence of non-separable exponential nonlinearities in the system dynamics that appear in Arrhenius law, none of the existing parameter estimators is able to deal with them in an efficient way and, in spite of many attempts, the problem was open for many years. To establish our result we propose a novel procedure to obtain a suitable nonlinearly parameterized regression equation and introduce a radically new estimation algorithm - derived applying the Immersion and Invariance methodology - that is applicable to these regression equations. A further contribution of the paper is that parameter convergence is guaranteed with weak excitation requirements.

In this paper we are interested in the problem of adaptive state observation of linear time-varying (LTV) systems where the system and the input matrices depend on unknown time-varying parameters. It is assumed that these parameters satisfy some known LTV dynamics, but with unknown initial conditions. Moreover, the state equation is perturbed by an additive signal generated from an exosystem with uncertain constant parameters. Our main contribution is to propose a globally convergent state observer that requires only a weak excitation assumption on the system., Comment: 21 pages, 4 figures, detailed paper

This paper considers the problem of frequency estimation for a multi-sinusoidal signal consisting of n sinuses in finite-time. The parameterization approach based on applying delay operators to a measurable signal is used. The result is the nth order linear regression model with n parameters, which depends on the signals frequencies. We propose to use Dynamic Regressor Extension and Mixing method to replace nth order regression model with n first-order regression models. Then the standard gradient descent method is used to estimate separately for each the regression model parameter. On the next step using algebraic equations finite-time frequency estimate is found. The described method does not require measuring or calculating derivatives of the input signal, and uses only the signal measurement. The efficiency of the proposed approach is demonstrated through the set of numerical simulations., Comment: 8 pages, 4 figures

In this paper we address the problems of flux and speed observer design for voltage-fed induction motors with unknown rotor resistance and load torque. The only measured signals are stator current and control voltage. Invoking the recently reported Dynamic Regressor Extension and Mixing-Based Adaptive Observer (DREMBAO) we provide the first global solution to this problem. The proposed DREMBAO achieve asymptotic convergence under an excitation condition that is strictly weaker than persistent excitation. If the latter condition is assumed the convergence is exponential.

In this paper we propose a solution to the problem of parameter estimation of nonlinearly parameterized regressions--continuous or discrete time--and apply it for system identification and adaptive control. We restrict our attention to parameterizations that can be factorized as the product of two functions, a measurable one and a nonlinear function of the parameters to be estimated. Although in this case it is possible to define an extended vector of unknown parameters to get a linear regression, it is well-known that overparameterization suffers from some severe shortcomings. Another feature of the proposed estimator is that parameter convergence is ensured without a persistency of excitation assumption. It is assumed that, after a coordinate change, some of the elements of the transformed function satisfy a monotonicity condition. The proposed estimators are applied to design identifiers and adaptive controllers for nonlinearly parameterized systems. In continuous-time we consider a general class of nonlinear systems and those described by Euler-Lagrange models, while in discrete-time we apply the method to the challenging problems of direct and indirect adaptive pole-placement. The effectiveness of our approach is illustrated with several classical examples, which are traditionally tackled using overparameterization and assuming persistency of excitation.

We present some new results on the dynamic regressor extension and mixing parameter estimators for linear regression models recently proposed in the literature. This technique has proven instrumental in the solution of several open problems in system identification and adaptive control. The new results include: (i) a unified treatment of the continuous and the discrete-time cases; (ii) the proposal of two new extended regressor matrices, one which guarantees a quantifiable transient performance improvement, and the other exponential convergence under conditions that are strictly weaker than regressor persistence of excitation; and (iii) an alternative estimator ensuring parameter estimation in finite-time that retains its alertness to track time-varying parameters. Simulations that illustrate our results are also presented., Comment: 8 pages, 7 figures, under review in IEEE TAC

One of the most widely studied dynamical systems in nonlinear control theory is the levitated ball. Several full-state feedback controllers that ensure asymptotic regulation of the ball position have been reported in the literature. However, to the best of our knowledge, the design of a stabilizing law measuring only the current and the voltage - so-called sensorless control - is conspicuous by its absence. Besides its unquestionable theoretical interest, the high cost and poor reliability of position sensors for magnetic levitated systems, makes the problem of great practical application. Our main contribution is to provide the fist solution to this problem. Instrumental for the development of the theory is the use of parameter estimation-based observers, which combined with the dynamic regressor extension and mixing parameter estimation technique, allow the reconstruction of the magnetic flux. With the knowledge of the latter it is shown that the mechanical coordinates can be estimated with suitably tailored nonlinear observers. Replacing the observed states, in a certainty equivalent manner, with a full information asymptotically stabilising law completes the sensorless controller design. Simulation results are used to illustrate the performance of the proposed scheme., Comment: 8 pages, 7 figures. arXiv admin note: substantial text overlap with arXiv:1711.02733

Voltage instability is a major threat in power system operation. The growing presence of constant power loads significantly aggravates this issue, hence motivating the development of new analysis methods for both existence and stability of voltage equilibria. Formally, this problem can be cast as the analysis of solutions of a set of nonlinear algebraic equations of the form $f(x)=0$, where $f:\mathbb{R}^n \mapsto \mathbb{R}^{n}$, and the associated differential equation $\dot x=f(x)$. By invoking advanced concepts of dynamical systems theory and effectively exploiting its monotonicity, we exhibit all possible scenarios for existence, uniqueness and stability, of its equilibria. We prove that, if there are equilibria, there is a distinguished one that is locally stable and attractive, and we give some physically-interpretable conditions such that it is unique. Moreover, a simple on-line procedure to decide whether equilibria exist of not, and to compute the distinguished one is proposed. In addition, we show how the proposed framework can be applied to long-term voltage stability analysis in AC power systems, multi-terminal high-voltage DC systems and DC microgrids., Comment: Submitted to IEEE Transactions on Automatic Control. This version: September 21, 2018

This note shows that the industry standard desired equilibrium for permanent magnet synchronous motors (i.e., maximum torque per Ampere) can be globally asymptotically stabilized with a PI control around the current errors, provided some viscous friction (possibly small) is present in the rotor dynamics and the proportional gain of the PI is suitably chosen. Instrumental to establish this surprising result is the proof that the map from voltages to currents of the incremental model of the motor satisfies some passivity properties. The analysis relies on basic Lyapunov theory making the result available to a wide audience.

The problem of designing a flux observer for magnetic field electromechanical systems from noise corrupted measurements of currents and voltages is addressed in this paper. Imposing a constraint on the systems magnetic energy function, which allows us to construct an algebraic relation between fluxes and measured voltages and currents that is independent of the mechanical coordinates, we identify a class of systems for which a globally convergent adaptive observer can be designed. A new adaptive observer design technique that effectively exploits the aforementioned algebraic relation is proposed and successfully applied to the practically important examples of permanent magnet synchronous motors and magnetic levitation systems.

In this paper we address the problem of state observation for sensorless control of nonlinear magnetic levitation systems, that is, the regulation of the position of a levitated object measuring only the voltage and current of the electrical supply. Instrumental for the development of the theory is the use of parameter estimation-based observers, which combined with the dynamic regressor extension and mixing parameter estimation technique, allow the reconstruction of the magnetic flux. With the knowledge of the latter it is shown that the mechanical coordinates can be estimated with suitably tailored nonlinear observers. Replacing the observed states, in a certainty equivalent manner, with a full information globally stabilising law completes the sensorless controller design. We consider one and two-degrees-of-freedom systems that, interestingly, demand totally different mathematical approaches for their solutions. Simulation results are used to illustrate the performance of the proposed schemes.

This paper deals with the problem of identification of photovoltaic arrays' maximum power extraction point---information that is encrypted in the current-voltage characteristic equation. We propose a new parameterisation of the classical five parameter model of this function that, combined with the recently introduced identification technique of dynamic regressor extension and mixing, ensures a fast and accurate estimation of all unknown parameters. A concavity property of the current-voltage characteristic equation is then exploited to directly identify the desired voltage operating point. Realistic numerical examples via computer simulations are presented to assess the performance of the proposed approach., Comment: This paper is submitted to th International Journal of Adaptive Control and Signal Processing