Search

The article correlates between symmetry breaking and phase transition. An analogy, extending from physics to biology, is known to exist between these two topics. Bacteriorhodopsin (bR) as a paradigm of membrane proteins has been used as a case study in the present work. The bR, as the sole protein embedded in what is called a purple membrane (PM), has attracted widespread interest in bionanotechnological applications. The lipids of PM have a crucial role in maintaining the crystal lattice of bR inside PM. For this reason, the present work has been concerned with elucidating the thermal phase transition properties of the PM lipids in orthogonal directions. The results indicated that the axial symmetry of bR exhibits considerable changes occurring at the thermal phase transition of lipids. These changes are brought by an anomaly observed in the time course of orthogonal electric responses during the application of thermal fields on PM. The observed anomaly may bear on symmetry breaking in bR occurring at the phase transition of lipids based on such analogy found between symmetry breaking and phase transition. Lipid-protein interactions may underlie the broken axial symmetry of bR at such lipid thermal transition of PM. Accordingly, thermally perturbed axial symmetry of bR may be of biological relevance relying on the essence of the crystal lattice of bR. Most importantly, a question has to be raised in the present study: Can bR, as a helical protein with broken axial symmetry, affect the symmetry breaking of helical light? This may be of potential technical applications based on a recent discovery that bR breaks the symmetry of helical light.

Native mass spectrometry (MS) was used to detect the membrane protein, bacteriorhodopsin (bR), in its 27 kDa monomeric form and trimeric assemblies directly from lipid-containing purple membranes (PMs) from the halophilic archaeon, Halobacterium salinarum . Trimer bR ion populations bound to lipid molecules were detected with n -octyl β-d-glucopyranoside as the solubilizing detergent; the use of octyl tetraethylene glycol monooctyl ether or n -dodecyl-β-d-maltopyranoside resulted in only detection of monomeric bR. The archaeal lipids phosphotidylglycerolphosphate methyl ester and 3-HSO 3 -Galp-β1,6-Manp-α1,2-Glcp-α1,1- sn -2,3-diphytanylglycerol were the only lipids in the PMs found to bind to bR, consistent with previous high-resolution structural studies. Removal of the lipids from the sample resulted in the detection of only the bR monomer, highlighting the importance of specific lipids for stabilizing the bR trimer. To the best of our knowledge, this is the first report of the detection of the bR trimer with resolved lipid-bound species by MS.

Bacteriorhodopsin (bR) of purple membrane (PM) is a retinal protein that forms aggregates in the form of trimers constituting, together with archaeal lipids, the crystalline structure of PM. The rotary motion of bR inside PM may be pertinent in understanding the essence of the crystalline lattice. An attempt has been made to determine the rotation of bR trimers which has been found to be detected solely at thermal phase transitions of PM, namely lipid, crystalline lattice and protein melting phase transitions. The temperature dependences of dielectric versus electronic absorption spectra of bR have been determined. The results suggest that the rotation of bR trimers, together with concomitant bending of PM, are most likely brought by structural changes in bR which might be driven by retinal isomerization and mediated by lipid. The rupturing of the lipid-protein contact might consequently lead to rotation of trimers associated with bending, curling or vesicle formation of PM. So the retinal reorientation may underlie the concomitant rotation of trimers. Most importantly, rotation of trimers might play a role, in terms of the essence of the crystalline lattice, in the functional activity of bR and may serve physiological relevance., Competing Interests: Declaration of Competing Interest None, (Copyright © 2023 Elsevier B.V. All rights reserved.)

Purple membrane (PM) is composed of several native lipids and the transmembrane protein bacteriorhodopsin (bR) in trimeric configuration. The delipidated PM (dPM) samples can be prepared by treating PM with CHAPS (3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate) to partially remove native lipids while maintaining bR in the trimeric configuration. By correlating the photocycle kinetics of bR and the exact lipid compositions of the various dPM samples, one can reveal the roles of native PM lipids. However, it is challenging to compare the lipid compositions of the various dPM samples quantitatively. Here, we utilize the absorbances of extracted retinal at 382 nm to normalize the concentrations of the remaining lipids in each dPM sample, which were then quantified by mass spectrometry, allowing us to compare the lipid compositions of different samples in a quantitative manner. The corresponding photocycle kinetics of bR were probed by transient difference absorption spectroscopy. We found that the removal rate of the polar lipids follows the order of BPG ≈ GlyC < S-TGD-1 ≈ PG < PGP-Me ≈ PGS. Since BPG and GlyC have more nonpolar phytanyl groups than other lipids at the hydrophobic tail, causing a higher affinity with the hydrophobic surface of bR, the corresponding removal rates are slowest. In addition, as the reaction period of PM and CHAPS increases, the residual amounts of PGS and PGP-Me significantly decrease, in concomitance with the decelerated rates of the recovery of ground state and the decay of intermediate M, and the reduced transient population of intermediate O. PGS and PGP-Me are the lipids with the highest correlation to the photocycle activity among the six polar lipids of PM. From a practical viewpoint, combining optical spectroscopy and mass spectrometry appears a promising approach to simultaneously track the functions and the concomitant active components in a given biological system., Competing Interests: Declaration of interest The authors declare no competing interests., (Copyright © 2022 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

On the occasion of the 2021 Lasker Basic Medical Research Award to Karl Deisseroth, Peter Hegemann, and Dieter Oesterhelt (for "the discovery of light-sensitive microbial proteins that can activate or deactivate individual brain cells-leading to the development of optogenetics and revolutionizing neuroscience"), Deisseroth reflects on this international collaboration, his basic mechanistic and structural discoveries regarding microbial channels that transduce photons into ion current, the causal exploration of brain cell function, and the pressing mysteries of psychiatry., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Interfacial properties and membrane protein solubilization activity of a series of partially fluorinated octyl-phosphocholine (PC) surfactants were investigated from the viewpoint of the fluorination degree of the hydrophobic chain. The critical micelle concentration (CMC), surface tension lowering activity, molecular occupied area at the CMC and free energy changes of micellization as well as adsorption to the air-water interface for each PC surfactant were estimated from surface tension measurements at 25 °C. The PCs with higher degree of fluorination exhibited low CMC and high surface activity, while the single trifluoromethyl group at the end of the chain appeared to enhance the hydrophilicity of the surfactant molecule. Under conditions where conventional short-chain surfactants, n-octyl-β-D-glucoside, Triton X-100 and dioctanoylphosphatidylcholine significantly solubilize purple membranes (PM), none of the fluorinated-PCs solubilized PM. This suggests that fluorinated-PCs are low-invasive enough to maintain the structure of lipids/protein assemblies like PM., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Rhodopsins are light-sensitive membrane proteins enabling transmembrane charge separation (proton pump) on absorption of a light quantum. Bacteriorhodopsin (BR) is a transmembrane protein from halophilic bacteria that belongs to the rhodopsin family. Potential applications of BR are considered so promising that the number of studies devoted to the use of BR itself, its mutant variants, as well as hybrid materials containing BR in various areas grows steadily. Formation of hybrid structures combining BR with nanoparticles is an essential step in promotion of BR-based devices. However, rapid progress, continuous emergence of new data, as well as challenges of analyzing the entire data require regular reviews of the achievements in this area. This review is devoted to the issues of formation of materials based on hybrids of BR with fluorescent semiconductor nanocrystals (quantum dots) and with noble metal (silver, gold) plasmonic nanoparticles. Recent data on formation of thin (mono-) and thick (multi-) layers from materials containing BR and BR/nanoparticle hybrids are presented.

Incorporating membrane proteins into membrane mimicking systems is an essential process for biophysical studies and structure determination. Monodisperse lipid nanodiscs have been found to be a suitable tool, as they provide a near-native lipid bilayer environment. Recently, a covalently circularized nanodisc (cND) assembled with a membrane scaffold protein (MSP) in circular form, instead of conventional linear form, has emerged. Covalently circularized nanodiscs have been shown to have improved stability, however the optimal strategies for the incorporation of membrane proteins, as well as the physicochemical properties of the membrane protein embedded in the cND, have not been studied. Bacteriorhodopsin (bR) is a seven-transmembrane helix (7TM) membrane protein, and it forms a two dimensional crystal consisting of trimeric bR on the purple membrane of halophilic archea. Here it is reported that the bR trimer in its active form can be directly incorporated into a cND from its native purple membrane. Furthermore, the assembly conditions of the native purple membrane nanodisc (PMND) were optimized to achieve homogeneity and high yield using a high sodium chloride concentration. Additionally, the native PMND was demonstrated to have the ability to assemble over a range of different pHs, suggesting flexibility in the preparation conditions. The native PMND was then found to not only preserve the trimeric structure of bR and most of the native lipids in the PM, but also maintained the photocycle function of bR. This suggests a promising potential for assembling a cND with a 7TM membrane protein, extracted directly from its native membrane environment, while preserving the protein conformation and lipid composition.

Bacteriorhodopsin (bR) trimers form a two-dimensional hexagonal lattice in the purple membrane of Halobacterium salinarum. However, the physiological significance of forming the lattice has long been elusive. Here, we study this issue by comparing properties of assembled and non-assembled bR trimers using directed mutagenesis, high-speed atomic force microscopy (HS-AFM), optical spectroscopy, and a proton pumping assay. First, we show that the bonds formed between W12 and F135 amino acid residues are responsible for trimer-trimer association that leads to lattice assembly; the lattice is completely disrupted in both W12I and F135I mutants. HS-AFM imaging reveals that both crystallized D96N and non-crystallized D96N/W12I mutants undergo a large conformational change (i.e., outward E-F loop displacement) upon light-activation. However, lattice disruption significantly reduces the rate of conformational change under continuous light illumination. Nevertheless, the quantum yield of M-state formation, measured by low-temperature UV-visible spectroscopy, and proton pumping efficiency are unaffected by lattice disruption. From these results, we conclude that trimer-trimer association plays essential roles in providing bound retinal with an appropriate environment to maintain its full photo-reactivity and in maintaining the natural photo-reaction pathway., (Copyright © 2013 Elsevier Inc. All rights reserved.)

We report here the measurement of the temperature-dependent surface charge density of purple membrane (PM) by using electrostatic force microscopy (EFM). The surface charge density was measured to be 3.4 × 10(5) e/cm(2) at room temperature and reaches the minimum at around 52 °C. The initial decrease of the surface charge density could be attributed to the reduced dipole alignment because of the thermally induced protein mobility in PM. The increase of charge density at higher temperature could be ascribed to the weakened interaction between proteins and the lipids, which leads to the exposure of the charged amino acids. This work could be a benefit to the direct assessment of the structural stability and electric properties of biological membranes at the nanoscale.

Purple membrane (PM) is a part of cytoplasmic membrane in certain extreme halophilic microorganisms belonging to Domain Archaea. It transduces light energy to generate proton gradient for ATP synthesis in the microorganisms. Bacteriorhodopsin (BR) is the only protein in PM responsible for the generation of proton gradient. Generally, PM was purified from Halobacterium salinarum via a tedious and lengthy sucrose density gradient ultracentrifugation (SGU). In this work, a facile method based on polyethyleneglycol (PEG)-phosphate aqueous-two- phase extraction system (ATPS) was employed to purify PM from cell lysate of H. salinarum. The results showed that PM could be completely recovered from the interface of PEG-phosphate ATPS with BR purity ca 94.1% as measured by UV-visible absorption spectra. In comparison with PM obtained by SGU, the PM isolated by ATPS could achieve the same level of purity and photocurrent activity (ca 177.2nA/μgBR/cm(2)) as analyzed by SDS-PAGE and photocurrent measurement, respectively. The easily scalable and straightforward ATPS procedure demonstrated that PM can be purified and recovered more cost-effectively with a significantly reduced operation time that should lead to broader range applications of PM possible., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Bacteriorhodopsin protein (bR)-based systems are one of the simplest known biological energy converters. The robust chemical, thermal and electrochemical properties of bR have made it an attractive material for photoelectric devices. This study demonstrates the photoelectric response of a dry bR layer deposited on a nitrocellulose membrane with indium tin oxide (ITO) electrodes. Light-induced electrical current as well as potential and impedance changes of dried bR film were recorded as the function of illumination. We have also tested bR in solution and found that the electrical properties are strongly dependent on light intensity changing locally proton concentration and thus pH of the solution. Experimental data support the assumption that bR protein on a positively charged nitrocellulose membrane (PNM) can be used as highly sensitive photo- and pH detector. Here the bR layer facilitates proton translocation and acts as an ultrafast optoelectric signal transducer. It is therefore useful in applications related to bioelectronics, biosensors, bio-optics devices and current carrying junction devices.

Protection of biological compounds, for example, enzymes, viruses, or even whole cells, against degradation is very important for many applications. Embedding of such compounds into polymer matrices is a straightforward common method. However, in biotechnology and medicine there is a great interest to prepare micro- and nanosized shells around the biocomponents in order to protect them and having only a minor increase in size. The PEGylation of biological macromolecules has gained attention because degradation by proteolytic enzymes is significantly retarded and, in turn, their bioavailability is enhanced. We found that PEGylation is also a powerful tool to protect biomaterials from degradation by small organic solvent molecules, in particular, ethanol. Methoxy-polyethylene glycol (MPEG) modified BR survives exposure to significant concentrations of ethanol, up to 30%, and preserves its photochromism, whereas unmodified PM is instantaneously denatured at such concentrations. This is useful for potential technical applications of BR but is of relevance for many other applications where biomaterials and, in particular, biomembranes may be exposed to solvents.

Bacteriorhodopsin (BR), a model system in biotechnology, is a G-protein dependent trans membrane protein which serves as a light driven proton pump in the cell membrane of Halobacterium salinarum. Due to the linkage of retinal to the protein, it seems colored and has numbers of versatile properties. As in vitro culture of the Halobacteria is very difficult, and isolation is time consuming and usually inefficient, production of genetically modified constructs of the protein is essential. There are three important characteristics based on protein catalytic cycle and molecular functions of photo-electric, photochromic and proton transporting, which makes this protein as a strategic molecule with potential applications in biotechnology. Such applications include protein films, used in artificial retinal implants, light modulators, three-dimensional optical memories, color photochromic sensors, photochromic and electrochromic papers and ink, biological camouflage and photo detectors for biodefense and non-defense purposes.

The structural organization of cellular membranes has an essential influence on their functionality. The membrane surfaces currently are considered to consist of various distinct patches, which play an important role in many processes, however, not all parameters such as size and distribution are fully determined. In this study, purple membrane (PM) patches isolated from Halobacterium salinarum were investigated in a first step using TERS (tip-enhanced Raman spectroscopy). The characteristic Raman modes of the resonantly enhanced component of the purple membrane lattice, the retinal moiety of bacteriorhodopsin, were found to be suitable as PM markers. In a subsequent experiment a single Halobacterium salinarum was investigated with TERS. By means of the PM marker bands it was feasible to identify and localize PM patches on the bacterial surface. The size of these areas was determined to be a few hundred nanometers., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Purple membranes (PM) from Halobacterium salinarum have been discussed for several technical applications. These ideas started just several years after its discovery. The biological function of bacteriorhodopsin (BR), the only protein in PM, is the light-driven proton translocation across the membrane thereby converting light energy into chemical energy. The astonishing physicochemical robustness of this molecular assembly and the ease of its isolation triggered ideas for technical uses. All basic molecular functions of BR, that is, photochromism, photoelectrism, and proton pumping, are key elements for technical applications like optical data processing and data storage, ultrafast light detection and processing, and direct utilization of sunlight in adenosine 5'-triphospate (ATP) generation or seawater desalination. In spite of the efforts of several research groups worldwide, which confirmed the proof-of-principle for all these potential applications, only the photochromism-based applications have reached a technical level. The physical reason for this is that no fixation or orientation of the PMs is required. The situation is quite different for photoelectrism and proton pumping where the macroscopic orientation of PMs is a prerequisite. For proton pumping, in addition, the formation of artificial membranes which prevent passive proton leakage is necessary. In this manuscript, we describe a new class of PM variants with oppositely charged membrane sides which enable an almost 100% orientation on a surface, which is the key element for photoelectric applications of BR. As an example, the mutated BR, BR-E234R7, was prepared and analyzed. A nearly 100% self-orientation on mica was obtained.

The light-driven proton pump bacteriorhodopsin (BR) embedded in a purple membrane (PM) from Halobacterium salinarum undergoes a series of conformational changes while transporting a proton from the cytoplasmic to the extracellular side over the course of the so-called photocycle. Wild-type BR variant D85T, where aspartic acid 85 is replaced by threonine, allows for the study of structural intermediates of this photocycle that are formed in a light-dependent manner in the wild-type and in thermal equilibrium by tuning the pH of the D85T purple membrane suspension. Especially the last and least studied O-intermediate of the photocycle of bacteriorhodopsin has caught recent attention. First AFM images of D85T under acidic conditions resembling wild-type BR under physiological conditions in the O-photocycle-intermediate are presented. Bacteriorhodopsins embedded in the strongly bent purple membranes were analyzed by single molecule force spectroscopy (SMFS) providing the first single molecule force spectra of BR in the O-intermediate. SMFS was further employed to determine the absolute sign of membrane curvature. Complementary electrostatic force microscopy (EFM) was performed to support PM side discrimination and determination of the bending direction. Bending of PM-D85T was analyzed in more detail providing further insight into the structure-function relationship of the bacteriorhodopsin proton pump as well as PM behaviour at the solid-liquid junction. Findings reported here are of general interest to the field of chemomechanical transducers.

We have used new kinetic fitting procedures to obtain infrared (IR) absolute spectra for intermediates of the main bacteriorhodopsin (bR) photocycle(s). The linear-algebra-based procedures of Hendler et al. (J. Phys. Chem. B, 105, 3319-3228 (2001)) for obtaining clean absolute visible spectra of bR photocycle intermediates were adapted for use with IR data. This led to isolation, for the first time, of corresponding clean absolute IR spectra, including the separation of the M intermediate into its M(F) and M(S) components from parallel photocycles. This in turn permitted the computation of clean IR difference spectra between pairs of successive intermediates, allowing for the most rigorous analysis to date of changes occurring at each step of the photocycle. The statistical accuracy of the spectral calculation methods allows us to identify, with great confidence, new spectral features. One of these is a very strong differential IR band at 1650 cm(-1) for the L intermediate at room temperature that is not present in analogous L spectra measured at cryogenic temperatures. This band, in one of the noisiest spectral regions, has not been identified in any previous time-resolved IR papers, although retrospectively it is apparent as one of the strongest L absorbance changes in their raw data, considered collectively. Additionally, our results are most consistent with Arg82 as the primary proton-release group (PRG), rather than a protonated water cluster or H-bonded grouping of carboxylic residues. Notably, the Arg82 deprotonation occurs exclusively in the M(F) pathway of the parallel cycles model of the photocycle., (© 2011 Society for Applied Spectroscopy)

We have performed a quantitative X-ray absorption fine structure analysis of bacteriorhodopsin in purple membrane patches and in lipidic cubic phases regenerated with Mn(2+). Lipidic cubic phases and purple membrane results have been compared, demonstrating that the lipidic cubic phase process does not introduce relevant distortions in the local geometry of the cation binding sites. For both samples, we have observed similarities for Mn(2+) coordination in terms of type, number, and average distances of surrounding atoms, indicating a first coordination shell composed by 6 O atoms, and 3/4 C atoms located in the second coordination shell.

Monolayer of functionalized lipid spread at the air/water interface is used for the structural analysis of soluble and membrane proteins by electron crystallography and single particle analysis. This powerful approach lacks of a method for the screening of the binding of proteins to the surface of the lipid layer. Here, we described an optical method based on the use of reflected light microscopy to image, without the use of any labeling, the lipid layer at the surface of buffers in the Teflon wells used for 2D crystallization. Images revealed that the lipid layer was made of a monolayer coexisting with liposomes or aggregates of lipids floating at the surface. Protein binding led to an increase of the contrast and the decrease of the fluidity of the lipid surface, as demonstrated with the binding of soluble Shiga toxin B subunit, of purple membrane and of solubilized His-BmrA, a bacterial ABC transporter. Moreover the reconstitution of membrane proteins bound to the lipidic surface upon detergent removal can be followed through the appearance of large recognizable domains at the surface. Proteins binding and reconstitution were further confirmed by electron microcopy. Overall, this method provides a quick evaluation of the monolayer trials, a significant reduction in screening by transmission electron microscopy and new insights in the proteins binding and 2D crystallogenesis at the lipid surface., (Copyright © 2010 Elsevier Inc. All rights reserved.)

All the intermediates of the bacteriorhodopsin photocycle are excitable with light of suitable wavelength. This property might regulate the activity in the cells when they are exposed in the nature to high light intensity. On the other hand this property is involved in many applications. In this study the ground state and M intermediate of dried oriented samples of wild-type bacteriorhodopsin and its mutant D96N were excited with 406 nm laser flashes. Substantial M populations were generated with quasi-continuous illumination. The decay of the absorption of M intermediate had three components: their lifetimes were very different for laser flash and quasi-continuous illuminations in cases of both bacteriorhodopsin species. The optical answer for the excitation of M intermediate had a lifetime of 2.2 ms. Electric signals for M excitation had large fast negative components and small positive components in the 100 μs time domain. The results are expected to have important implications for bioelectronic applications of bacteriorhodopsin., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A light-driven proton pump bacteriorhodopsin (bR) forms a two-dimensional hexagonal lattice with about 10 archaeal lipids per monomer bR on purple membrane (PM) of Halobacterium salinarum. In this study, we found that the weakening of the bR-lipid interaction on PM by addition of alcohol can be detected as the significant increase of protein solubility in a nonionic detergent, dodecyl β-D-maltoside (DDM). The protein solubility in DDM was also increased by bR-lipid interaction change accompanied by structural change of the apoprotein after retinal removal and was about 7 times higher in the case of completely bleached membrane than that of intact PM. Interestingly, the cyclic and milliseconds order of structural change of bR under light irradiation also led to increasing the protein solubility and had a characteristic light intensity dependence with a phase transition. These results indicate that there is a photointermediate in which bR-lipid interaction has been changed by its dynamic structural change. Because partial delipidation of PM by CHAPS gave minor influence for the change of the protein solubility compared to intact PM in both dark and light conditions, it is suggested that specific interactions of bR with some lipids which remain on PM even after delipidation treatment have a key role for the change of solubility in DDM induced by alcohol binding, ligand release, and photon absorption on bR.

It is notoriously difficult to grow membrane protein crystals and solve membrane protein structures. Improved detection and screening of membrane protein crystals are needed. We have shown here that second-order nonlinear optical imaging of chiral crystals based on second harmonic generation can provide sensitive and selective detection of two-dimensional protein crystalline arrays with sufficiently low background to enable crystal detection within the membranes of live cells. The method was validated using bacteriorhodopsin crystals generated in live Halobacterium halobium bacteria and confirmed by electron microscopy from the isolated crystals. Additional studies of alphavirus glycoproteins indicated the presence of localized crystalline domains associated with virus budding from mammalian cells. These results suggest that in vivo crystallization may provide a means for expediting membrane protein structure determination for proteins exhibiting propensities for two-dimensional crystal formation., (Copyright © 2011 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Neutron diffraction from hydrated stacks of natural two-dimensional crystal patches of purple membrane from Halobacterium salinarum was studied as a function of pressure. Measurements in H(2)O and D(2)O permitted the determination of the distribution of water of hydration in the in-plane projection of the membrane. The main experimental difference observed between the samples at 300 MPa and atmospheric pressure was a major reorganization of the hydration around the lipid head groups and protein, associated with a protein conformational change and small reductions in lamellar (stacking) and in-plane lattice spacings, which was consistent with the compressibility of membrane-protein and lipid components.

Purple membrane (PM) from Halobacterium salinarum, which comprises bacteriorhodopsin (BR) and lipids only, has been employed by many groups as a model system to study the structure and dynamics of membrane proteins. Although the conformational dynamics of BR within PM has been extensively analyzed with subnanometer resolution by means of diffraction experiments and spectroscopic methods, as well, structural studies of dynamical transitions within single PMs are rare. In this work, we show that tapping-mode atomic force microscopy (TM-AFM) is ideally suited to study dynamical transitions within solid-supported PMs at the nanoscale. Time-dependent AFM analysis of solid-supported PMs shows that redistribution processes take place between a crystalline core region, featuring a height of approximately 5 nm, and a highly mobile rim region (approximately 4 nm in height). Furthermore, we discuss the influence of temperature and substrate on the equilibrium. The experiments are complemented by electrostatic force microscopy (EFM) of PM on mica. Beyond their importance for many physiological processes, dynamical transitions in biological membranes, as observed in this work, are of critical importance for all methods that make use of solid-supported membrane assemblies, either analytical tools or applications.

Dynamic changes in protein conformation in response to external stimuli are important in biological processes, but it has proved difficult to directly visualize such structural changes under physiological conditions. Here, we show that high-speed atomic force microscopy can be used to visualize dynamic changes in stimulated proteins. High-resolution movies of a light-driven proton pump, bacteriorhodopsin, reveal that, upon illumination, a cytoplasmic portion of each bacteriorhodopsin monomer is brought into contact with adjacent trimers. The bacteriorhodopsin-bacteriorhodopsin interaction in the transiently formed assembly engenders both positive and negative cooperative effects in the decay kinetics as the initial bacteriorhodopsin recovers and, as a consequence, the turnover rate of the photocycle is maintained constant, on average, irrespective of the light intensity. These results confirm that high-resolution visualization is a powerful approach for studying elaborate biomolecular processes under realistic conditions.

Twinning is one of the most common crystal-growth defects in protein crystallography. There are neither efficient rational approaches for the growth of nontwinned protein crystals nor are there examples of systematic studies of the dependence of the twinning-ratio distribution on crystallization conditions. The description of the twinning phenomenon has been covered even less for membrane-protein crystals and is non-existent for crystals grown using lipidic phases (in meso). In the present work, possibilities for overcoming merohedral twinning are investigated for crystals of the membrane protein bacteriorhodopsin (bR) grown in meso. It is shown that traditional crystallization additives are not effective in the case of the in meso crystallization of bR. The twinning ratio was determined for 310 crystals grown under different crystallization conditions. A correlation of the twinning ratio with the growth rate of the crystals was observed. Slow growth indicated that crystals had a noticeable chance of avoiding twinning. Model calculations were performed in order to rationalize this observation. The calculations confirmed the experimental observation that most crystals consist of two twin domains and showed that under this condition small changes in the probability of twin-domain formation lead to dramatic changes in the number of nontwinned crystals, which explains why slow crystal growth results in a considerable number of nontwinned crystals.

We present experimental evidence for a long-range protein-protein interaction in purple membrane (PM). The interprotein dynamics were quantified by measuring the spectrum of the acoustic phonons in the 2D bacteriorhodopsin (BR) protein lattice using inelastic neutron scattering. Phonon energies of about 1 meV were determined. The data are compared to an analytical model, and the effective spring constant for the interaction between neighboring protein trimers are determined to be k = 53 N/m. Additional, optical-like excitations at 0.45 meV were found and assigned to intraprotein dynamics between neighboring BR monomers.

High-speed atomic force microscopy (HS-AFM) is becoming a reference tool for the study of dynamic biological processes. The spatial and time resolutions of HS-AFM are on the order of nanometers and milliseconds, respectively, and allow structural and functional characterization of biological processes at the single-molecule level. In this work we present contact-mode HS-AFM movies of purple membranes containing two-dimensional arrays of bacteriorhodopsin (bR). In high-resolution movies acquired at a 100 ms frame acquisition time, the substructure on individual bR trimers was visualized. In regions in between different bR arrays, dynamic topographies were observed and interpreted as motion of the bR trimers. Similarly, motion of bR monomers in the vicinity of lattice defects in the purple membrane was observed. Our findings indicate that the bR arrays are in a mobile association-dissociation equilibrium. HS-AFM on membranes provides novel perspectives for analyzing the membrane diffusion processes of nonlabeled molecules.

We study the physical origins of phase contrast in dynamic atomic force microscopy (dAFM) in liquids where low-stiffness microcantilever probes are often used for nanoscale imaging of soft biological samples with gentle forces. Under these conditions, we show that the phase contrast derives primarily from a unique energy flow channel that opens up in liquids due to the momentary excitation of higher eigenmodes. Contrary to the common assumption, phase-contrast images in liquids using soft microcantilevers are often maps of short-range conservative interactions, such as local elastic response, rather than tip-sample dissipation. The theory is used to demonstrate variations in local elasticity of purple membrane and bacteriophage 29 virions in buffer solutions using the phase-contrast images.

In this study, labeled purple membrane (PM, Halobacterium salinarium) patches with maintained bioactivity were prepared by biotinylation of the glycolipids on the extracellular (EC) surface of the PM. After in situ streptavidin incubation, the extracellular surface could be directly visualized because it was completely covered with bright dots. The height of a single biotin/streptavidin interaction layer was approximately 2.5 nm. By using calcium thioglycolate-modified tips and an atomic-force microscope (AFM), two distinct topographical features of PMs placed in a buffer with low salt concentration were recognized: the flat EC surface and the domelike cytoplasmic (CP) surface. Biotinylation and AFM with modified tips were simultaneously used with consistent results. Those observations are useful for future studies on PM bioconjugation and oriented assembly as well as the design of bacteriorhodopsin-based photoelectric devices.

Despite many advances in membrane proteomics during the last decade the fundamental problem of accessing the transmembrane regions itself has only been addressed to some extent. The present study establishes a method for the nano-LC-based analysis of complex membrane proteomes on the basis of a methanolic porcine pancreatic elastase digest to increase transmembrane coverage. Halobacterium salinarium purple and Corynebacterium glutamicum membranes were successfully analyzed by using the new protocol. We demonstrated that elastase digests yield a large proportion of transmembrane peptides, facilitating membrane protein identification. The potential for characterization of a membrane protein through full sequence coverage using elastase is there but is restricted to the higher abundance protein components. Compatibility of the work flow with the two most common mass spectrometric ionization techniques, ESI and MALDI, was shown. Currently better results are obtained using ESI mainly because of the low response of MALDI for strictly neutral peptides. New findings concerning elastase specificity in complex protein mixtures reveal a new prospect beyond the application in shotgun experiments. Furthermore peptide mass fingerprinting with less specific enzymes might be done in the near future but requires an adaptation of current search algorithms to the new proteases.

The purple membrane (PM) is a specialized membrane patch found in halophilic archaea, containing the photoreceptor bacteriorhodopsin (bR). It is long known that calcium ions bind to the PM, but their position and role remain elusive to date. Molecular dynamics simulations in conjunction with a highly detailed model of the PM have been used to investigate the stability of calcium ions placed at three proposed cation binding sites within bR, one near the Schiff base, one in the region of the proton release group, and one near Glu9. The simulations suggest that, of the sites investigated, the binding of calcium ions was most likely at the proton release group. Binding in the region of the Schiff base, while possible, was associated with significant changes in local geometry. Calcium ions placed near Glu9 in the interior of bR (simultaneously to a Ca(2+) near the Schiff base and another one near the Glu194-Glu204 site) were not stable. The results obtained are discussed in relation to recent experimental observations and theoretical considerations., ((c) 2008 Wiley-Liss, Inc.)

Protein motions occur over many decades of time, from femtoseconds to seconds and longer. Fast (ps-ns) protein motion enabled by water dynamics on the surfaces of protein molecules is generally believed to be required for biological function. The coupling between water and protein dynamics for soluble proteins in aqueous solution is relatively well understood, while the couplings between protein, lipid, and water dynamics in membranes are only beginning to be unravelled. We report a molecular dynamics simulation study of the dynamics of water hydrating purple membranes (PM). We validate our simulations by comparing the temperature and hydration dependence of crystal lattice parameters and water and protein/lipid dynamics with neutron diffraction and spectroscopic data. We proceed to examine the temperature dependence of several time-dependent quantities describing different aspects of water dynamics, and identify and characterize the correlations between water dynamics and the motion of the protein and lipid components of PM. Our results point to a correlation between the solvation dynamics of lipid molecules and the dynamics of both the protein and lipid components.

An integrated picture of hydration shell dynamics and of its coupling to functional macromolecular motions is proposed from studies on a soluble protein, on a membrane protein in its natural lipid environment, and on the intracellular environment in bacteria and red blood cells. Water dynamics in multimolar salt solutions was also examined, in the context of the very slow water component previously discovered in the cytoplasm of extreme halophilic archaea. The data were obtained from neutron scattering by using deuterium labelling to focus on the dynamics of different parts of the complex systems examined.

Bacteriorhodopsin (BR) undergoes a conformational change during the photocycle and the proton transport through the membrane. For the first time, we could demonstrate by direct imaging of freely suspended native purple membranes (PMs) that the flat disk-like shape of PMs changes dramatically as soon as most of the BRs are in a state characterized by a deprotonated Schiff base. Light-induced shape changes are easily observed with mutated BRs of the BR-D96N type, i.e., all variants which show an increased M 2 lifetime. On the other hand, large-scale shape changes are induced by pH changes with PM containing mutated BRs of the BR-D85T type, where Asp85 is replaced for a neutral amino acid. In such PMs, all BRs are titrated simultaneously and the resulting shape of the membranes depends on the initial shape only. As the majority of PMs in the "flat" state are more or less round disks, the bent membranes often comprise bowl-like and tube-like bent structures. The method presented here enables one to derive size changes of membrane-embedded BRs on the single molecule level from "macroscopic", easily accessible data like the curvature radii observed in cryo-SEM. The potential of BR as a pH-controlled and/or light-controlled microscaled biological actuator needs further consideration.

This work examined the biotin modification of bacteriorhodopsin (BR) in the purple membrane (PM). The results of flash kinetic absorption measurements showed that photocycle was maintained in biotinylated BR. Biotinylated BR also maintained its photoelectric activity, as indicated by the photoelectric response of the bilayer lipid membrane (BLM). Atomic force microscopy (AFM) of stretavidiin-bound biotin revealed that biotin molecules covered both surfaces of the, but the amount of biotinylated BR on the extracellular (EC) surface was markedly higher than on the cytoplasmic (CP) surface. Further studies showed that, after reaction with fluorescamine (FL), biotin labeling occurred only on the CP surface. These results are informative for future work on bioconjugation of BR as well as work on oriented assembly and the design of BR-based photoelectric devices.

The function and dynamics of proteins depend on their direct environment, and much evidence has pointed to a strong coupling between water and protein motions. Recently however, neutron scattering measurements on deuterated and natural-abundance purple membrane (PM), hydrated in H2O and D2O, respectively, revealed that membrane and water motions on the ns-ps time scale are not directly coupled below 260 K (Wood et al. in Proc Natl Acad Sci USA 104:18049-18054, 2007). In the initial study, samples with a high level of hydration were measured. Here, we have measured the dynamics of PM and water separately, at a low-hydration level corresponding to the first layer of hydration water only. As in the case of the higher hydration samples previously studied, the dynamics of PM and water display different temperature dependencies, with a transition in the hydration water at 200 K not triggering a transition in the membrane at the same temperature. Furthermore, neutron diffraction experiments were carried out to monitor the lamellar spacing of a flash-cooled deuterated PM stack hydrated in H2O as a function of temperature. At 200 K, a sudden decrease in lamellar spacing indicated the onset of long-range translational water diffusion in the second hydration layer as has already been observed on flash-cooled natural-abundance PM stacks hydrated in D2O (Weik et al. in J Mol Biol 275:632-634, 2005), excluding thus a notable isotope effect. Our results reinforce the notion that membrane-protein dynamics may be less strongly coupled to hydration water motions than the dynamics of soluble proteins.

Molecular electronics is very much about contacts, and thus understanding of any generic contact effect is essential to its advance. For example, it is still not obvious in how far variations in electrode roughness of macroscopic contacts can lead to rectification. Here we report an investigation of this contact effect on electronic transport properties using metal-insulator-metal planar junctions with a 5 nm thick bacteriorhodopsin-based insulator as model system. We demonstrate that the experimentally observed rectifying behavior is not an intrinsic property of the molecules used, but rather of the local contact quality. Even a slight increase in surface roughness of the bottom electrode gives rise to distinct rectifying behavior in these and, by extrapolation, possibly other molecular junctions.

The membrane protein bacteriorhodopsin (BR) can be kept soluble in its native state for months in the absence of detergent by amphipol (APol) A8-35, an amphiphilic polymer. After an actinic flash, A8-35-complexed BR undergoes a complete photocycle, with kinetics intermediate between that in detergent solution and that in its native membrane. BR/APol complexes form well defined, globular particles comprising a monomer of BR, a complete set of purple membrane lipids, and, in a peripheral distribution, approximately 2 g APol/g BR, arranged in a compact layer. In the absence of free APol, BR/APol particles can autoassociate into small or large ordered fibrils.

The effect of deuteration on the 13C linewidths of U-13C, 15N 2D crystalline bacteriorhodopsin (bR) from Halobacterium salinarium, a 248-amino acid protein with seven-transmembrane (7TM) spanning regions, has been studied in purple membranes as a prelude to potential structural studies. Spectral doubling of resonances was observed for receptor expressed in 2H medium (for both 50:50% 1H:2H, and a more highly deuterated form) with the resonances being of similar intensities and separated by <0.3 ppm in the methyl spectral regions in which they were readily distinguished. Line-widths of the methyl side chains were not significantly altered when the protein was expressed in highly deuterated medium compared to growth in fully protonated medium (spectral line widths were about 0.5 ppm on average for receptor expressed both in the fully protonated and highly deuterated media from the C delta, C gamma 1, and C gamma 2 Ile 13C signals observed in the direct, 21-39 ppm, and indirect, 9-17 ppm, dimensions). The measured 13C NMR line-widths observed for both protonated and deuterated form of the receptor are sufficiently narrow, indicating that this crystalline protein morphology is suitable for structural studies. 1) decoupling comparison of the protonated and deuterated bR imply that deuteration may be advantageous for samples in which low power 1H decoupling is required.

Nanoscale electron transport through the purple membrane monolayer, a two-dimensional crystal lattice of the transmembrane protein bacteriorhodopsin, is studied by conductive atomic force microscopy. We demonstrate that the purple membrane exhibits nonresonant tunneling transport, with two characteristic tunneling regimes depending on the applied voltage (direct and Fowler-Nordheim). Our results show that the purple membrane can carry significant current density at the nanometer scale, several orders of magnitude larger than previously estimated by macroscale measurements.

We investigated the influence of hydration water on the relationship between structure, dynamics and function in a biological membrane system. For the example of the purple membrane (PM) with its protein bacteriorhodopsin (BR), a light-driven proton pump, complementary information from neutron diffraction, quasi-elastic neutron scattering (QENS) and dielectric spectroscopy will form a comprehensive picture of the structural and dynamic behavior of the PM in the temperature range between 150 and 290 K. Temperature- and humidity-dependent changes in the membrane system influence the accessibility of the different photocycle intermediates of BR. The melting of the 'freezing bound water' between 220 and 250 K could be related to the transition from the M1 to the M2 intermediate, which represents the key step in the photocycle. The dynamic transition in the vicinity of 180 K was shown to be necessary to ensure that the M1 intermediate can be populated and that the melting of crystallized bulk water above 255 K enables the completion of the photocycle.

In view of recent theories of "active" membranes, we have studied multilamellar phospholipid membrane stacks with reconstituted transmembrane protein bacteriorhodopsin (BR) under different illumination conditions by X-ray scattering. The light-active protein is considered as an active constituent which drives the system out of equilibrium and is predicted to change the collective fluctuation properties of the membranes. Using X-ray reflectivity, X-ray non-specular (diffuse) scattering, and grazing incidence scattering, we find no detectable change in the scattering curves when changing the illumination condition. In particular the intermembrane spacing d remains constant, after eliminating hydration-related artifacts by design of a suitable sample environment. The absence of any observable non-equilibrium effects in the experimental window is discussed in view of the relevant parameters and recent theories.

The behavior of the D115A mutant was analyzed by time-resolved UV-Vis and Fourier transformed infrared (FTIR) spectroscopies, aiming to clarify the role of Asp115 in the intra-protein signal transductions occurring during the bacteriorhodopsin photocycle. UV-Vis data on the D115A mutant show severely desynchronized photocycle kinetics. FTIR data show a poor transmission of the retinal isomerization to the chromoprotein, evidenced by strongly attenuated helical changes (amide I), the remarkable absence of environment alterations and protonation/deprotonation events related to Asp96 and direct Schiff base (SB) protonation form the bulk. This argues for the interactions of Asp115 with Leu87 (via water molecule) and Thr90 as key elements for the effective and vectorial proton path between Asp96 and the SB, in the cytoplasmic half of bacteriorhodopsin. The results strongly suggest the presence of a regulation motif enclosed in helices C and D (Thr90-Pro91/Asp115) which drives properly the dynamics of helix C through a set of interactions. It also supports the idea that intra-helical hydrogen bonding clusters in the buried regions of transmembrane proteins can be potential elements in intra-protein signal transduction.

The present work describes the results of a study aimed at identifying candidate cation binding sites on the extracellular region of bacteriorhodopsin, including a site near the retinal pocket. The approach used is a combined effort involving computational chemistry methods (computation of cation affinity maps and molecular dynamics) together with the Extended X-Ray Absorption Fine Structure (EXAFS) technique to obtain relevant information about the local structure of the protein in the neighborhood of Mn(2+) ions in different affinity binding sites. The results permit the identification of a high-affinity binding site where the ion is coordinated simultaneously to Asp212(-) and Asp85(-). Comparison of EXAFS data of the wild type protein with the quadruple mutant E9Q/E74Q/E194Q/E204Q at pH 7.0 and 10.0 demonstrate that extracellular glutamic acid residues are involved in cation binding., ((c) 2007 Wiley-Liss, Inc.)

Earlier it was an orthodoxy that purple membranes (PMs) in aqueous medium are shaped as flat hard disks. In a few newer articles it has been shown that PMs are bent and their curvature varies with surface charge density. The purpose of this work is to answer which is the dominant factor for PM bending--structural or electrostatic forces. Two positively charged proteins are used: phytohemagglutinin (PhHA) and protamine. The electrophoretic mobility and electric polarizability of PMs are measured by microelectrophoresis and electric dichroism. The results show that both proteins reduce the mobility because they are adsorbed on PM surface. However, their influence on the electric polarizability is in the opposite direction--protamine reduces it (trivial effect) while PhHA increases the polarizability (non-trivial effect). The last result is explained by a straightening the initially bent PM because of specific bonding of PhHA to asymmetrically disposed glycolipids of PM in contrast to the electrostatic adsorption of protamine. It has been concluded that PMs in water medium are bent in the same manner as in in vivo--the intracellular surface with a higher negative charge is concave. The results indicate that electrostatic forces play a significant role in PM curvature but the shape of structural elements is the main factor determining the geometry of PM.

Fluorescence and absorption spectra were used to study the temperature effect on the conformation of bacteriorhodopsin (bR) in the blue and purple membranes (termed as bRb and bRp respectively). The maximum emission wavelengths of tryptophan fluorescence in both proteins at room temperature are 340 nm, and the fluorescence quantum yield of bRb is about 1.4 fold higher than that of bRp. As temperature increases, the tryptophan fluorescence of bRb decreases, while the tryptophan fluorescence of bRp increases. The binding study of extrinsic fluorescent probe bis-ANS indicated that the probe can bind only to bRb, but not to bRp. These results suggest that significant structural difference existed between bRb and bRp. It was also found that both kinds of bR are highly thermal stable. The maximum wavelength of the protein fluorescence emission only shifted from 340 nm to 346 nm at 100 degrees C. More interestingly, as temperature increased, the characteristic absorption peak of bRb at 605 nm decreased and a new absorption peak at 380 nm formed. The transition occurred at a narrow temperature range (65 degrees C-70 degrees C). These facts indicated that an intermediate can be induced by high temperature. This phenomenon has not been reported before.