Search

Reactivity worth of fuel rods at the JSI TRIGA research reactor was measured. Differently burned fuel rods were chosen to validate fuel burnup calculations. Two methods of measuring reactivity worth of fuel rods are used, traditional method is compared to newly introduced method using fuel rods swapping. Connection between both methods is described theoretically and the theory is validated experimentally. Fuel rod worth calculated using the newly introduced fuel rod swap method was within 1σ of worth measured using the traditional method. In addition to the recently performed experiments, weekly measurements of reactor core reactivity throughout the operational history are used for validation. The measured data were used to validate the fuel burnup and core criticality calculations. Fuel burnup calculations are performed using three different computer codes: the deterministic TRIGLAV, the Monte Carlo Serpent-2, and the hybrid RAPID. Great agreement was observed for Serpent-2 and RAPID by simulating fuel rod worth and its burnup, indicating that the fuel burnup and criticality calculations are accurate and that reactivity changes due to small burnup differences on the order of 10 pcm can be accurately simulated. In addition it was shown using ex-core detectors and large fission chamber that detector response changes due to fuel swapping are evident for fuel rod burnup differences of 20 MWd/kg. Fuel burnup calculations were further validated on excess reactivity measurements for three mixed TRIGA cores. The calculated burnup reactivity coefficient ΔρBU using Serpent-2 and RAPID was within 1σ of the measurements, showing both codes are capable of calculating burnup for different TRIGA fuel types.

In the paper we validate theoretical models of the pulse against experimental data from the Jozef Stefan Institute TRIGA Mark II research reactor. Data from all pulse experiments since 1991 have been collected, analysed and are publicly available. This paper summarizes the validation study, which is focused on the comparison between experimental values, theoretical predictions (Fuchs-Hansen and Nordheim-Fuchs models) and calculation using computational program Improved Pulse Model. The results show that the theoretical models predicts higher maximum power but lower total released energy, full width at half maximum and the time when the maximum power is reached is shorter, compared to Improved Pulse Model.We evaluate the uncertainties in pulse physical parameters (maximum power, total released energy and full width at half maximum) due to uncertainties in reactor physical parameters (inserted reactivity, delayed neutron fraction, prompt neutron lifetime and effective temperature reactivity coefficient of fuel). It is found that taking into account overestimated correlation of reactor physical parameters does not significantly affect the estimated uncertainties of pulse physical parameters. The relative uncertainties of pulse physical parameters decrease with increasing inserted reactivity. If all reactor physical parameters feature an uncorrelated uncertainty of 10 % the estimated total uncertainty in peak pulse power at 3 $ inserted reactivity is 59 %, where significant contributions come from uncertainties in prompt neutron lifetime and effective temperature reactivity coefficient of fuel. In addition we analyse contribution of two physical mechanisms (Doppler broadening of resonances and neutron spectrum shift) that contribute to the temperature reactivity coefficient of fuel. The Doppler effect contributes around 30 %–15 % while the rest is due to the thermal spectrum hardening for a temperature range between 300 K and 800 K.

This paper discusses the current status of the European research reactor (RR) fleet and identified opportunities for its utilization. The data for this analysis was collected through a specific questionnaire from which a database of the European RR fleet was created. The questionnaire was designed to assess the degree of exploitation of different RR applications and to identify gaps and opportunities for future utilization. The results indicate that the European RR fleet is older compared to the world average, with no new research reactors built in Europe since 1992. The majority of RRs reported low levels of exploitation across all applications, and a desire to expand utilization was expressed by 78% of respondents. Lack of manpower, finance, and customers were identified as the main obstacles preventing expansion, while the need for more nuclear engineers was identified as a clear opportunity to attract people to the field. The findings of this study emphasize the need for actions to be taken to combat future needs and to improve the utilization of the European RR fleet. Overall, this study provides valuable insights for policymakers, industry professionals, and researchers working in the field of nuclear energy.

Fuel burnup of the JSI TRIGA was calculated by simulating complete operational history consisting of 240 different core configurations from 1966 to 2020. At the moment we are unable to perform burnup measurements, e.g. gamma spectroscopy on burned fuel elements, hence we used weekly measured excess reactivity as a reference point of different core configurations to verify the calculated core reactivity. Changes in reactivity due to burnup were assumed to be linear and this assumption was verified for burnup intervals smaller than 3 MWd/kg(HM). The comparison was performed on 46 different core configurations with different type of fuel elements. The Serpent-2 calculations decently predict the rate of reactivity change on different cases, as 52 % of calculations are withing 1σ and 86.9 % within 2σ of the measurements for total number of 46 cases. Additional analysis was performed by comparing unit cell calculations of different fuel types. Four different types of TRIGA fuel were used to analyse burnup changes in LEU and HEU fuel, where positive reactivity feedback on burnup was observed for HEU fuel due to burnable absorbers. Serpent-2 and WIMSD-5B were compared on unit-cell basis where good agreement within 200 pcm of reactivity change for large burnup was observed. In addition neutron spectrum changes due to burnup were investigated using unit-cell calculations where 4 % increase of the thermal peak and 1 % decrease of fast peak of the spectrum was observed for typical fuel burnups of 20 MWd/kg(HM), which approximately represents JSI TRIGA burnup at this moment.

Constant improvements of the computational power and methods as well as demands of accurate and reliable measurements for reactor operation and safety require a continuous upgrade of the instrumentation. In particular, nuclear sensors used in nuclear fission reactors (research or power reactors) or in nuclear fusion facilities are operated under intense mixed neutron and gamma-ray fields, and need to be calibrated and modeled to provide selective and accurate neutron and gamma-ray measurements. The French Atomic Energy and Alternative Energies Commission (CEA) and the Jožef Stefan Institute (JSI) have started an experimental program dedicated to a detailed experimental benchmark with analysis using Monte Carlo particle transport calculations and a series of neutron and gamma-ray sensor types used in the JSI TRIGA Mark II reactor. CEA has setup a simplified TRIPOLI-4® modeling scheme of the JSI TRIGA reactor based on the information available in the IRPhEP benchmark in order to facilitate analysis of future neutron and gamma-ray measurements. These allow the CEA to perform a TRIPOLI-4 instrumentation calculation scheme benchmarked with the JSI MCNP model. This paper presents the main results of this CEA calculation scheme application and the analysis of their comparison to the JSI results obtained in 2012 with the MCNP5 & ENDF/B-VII.0 calculation scheme. This paper will conclude with some information about the new experimental program to be carried out in 2022 in the TRIGA reactor core.

Neutron detection is a relevant topic in the field of nuclear instrumentation. It is at the heart of the concerns for fusion applications (neutron diagnostics, measurements inside the Test Blanket Modules TBM) as well as for fission applications (in-core and ex-core monitoring, neutron mapping or safety applications in research reactors). Moreover, due to the even more harsh conditions of the future experimental reactors such as the Jules Horowitz Reactor (JHR) or International Thermonuclear Experimental Reactor (ITER), neutron detectors need to be adapted to high neutron and γ fluxes, high nuclear heating rates and high temperatures. Consequently, radiation and temperature hardened sensors with fast response, high energy resolution and stability in a mixed neutron and γ environment are required. All these requirements make wide-bandgap semiconductors and, more precisely, Silicon Carbide (SiC) serious candidates due to their intrinsic characteristics in such extreme environments. Thus, since the last decades, SiC-based detectors are developed and studied for neutron detection in various nuclear facilities. In this paper, a SiC-based neutron detector is 3-D designed and studied through thermal and radiation-matter interaction numerical simulations for a future irradiation campaign at the Jožef Stefan Institute TRIGA Mark II research reactor in Slovenia. Firstly, this paper presents the scientific background and issues of our SiC-based detectors. In a second part the 3-D geometry is shown. Thereafter, the 3-D numerical thermal simulation results are reported. Finally, the 3-D numerical radiation/matter interaction simulations results are presented.

A pulse experiment model was validated in order to support future pulse experimental campaigns. All pulse experiments data was collected and are publicly available at http://trigapulse.ijs.si/. A comparison of the measured pulse physical parameters (maximal power, total released energy and full width at half maximum) and theoretical predictions (Fuchs-Hansen and the Nordheim-Fuchs models) was made.

The JSI TRIGA reactor features several in-core and ex-core irradiation facilities, each having different properties, such as neutron/gamma flux intensity, spectra and irradiation volume. A series of experiments and calculations was performed in order to characterise radiation fields in irradiation channel thus allowing users to perform irradiations in a well characterised environment. Since 2001 the reactor has been heavily used for radiation hardness studies for components used at accelerators such as the Large Hadron Collider (LHC) at CERN. Since 2010 it has been extensively used for testing of new detectors and innovative data acquisition systems and methods developed and used by the CEA. Recently, several campaigns were initiated to characterise the gamma field in the reactor and use the experimental data for improvement of the treatment of delayed gammas in Monte Carlo particle transport codes. In the future it is planned to extend the testing options by employing pulse mode operation, installation of a high energy gamma ray irradiation facility and allow irradiation of larger samples at elevated temperature.

Activated cooling water in nuclear facilities can present a significant radiation source around primary cooling system causing radiation damage to electrical components, increasing doses to personnel and in the case of fusion facilities additional heating to superconducting coils. As there are only few sources of gamma rays with energies in the range of 6 MeV and 7 MeV an irradiation system using activated cooling water as the source of energetic gamma rays is proposed at the Jožef Stefan Institute (JSI) TRIGA Mark II research reactor. Two different conceptual designs, one utilizing central irradiation channel and one utilizing radial piercing port for water activation, are presented and analysed in the paper. Despite an order of magnitude higher water activation in central channel compared to radial piercing port the 16N decay rate in the irradiation facility is comparable between both design (order of 108 decays per second) due to longer transient time from central channel to irradiation facility. In the irradiation facility the expected biological dose rates due to the 16N decay rate are in order of several mSv/h. From the results he conceptual design utilizing the radial piercing port currently presents the best option for the irradiation facility due to the simpler design of the irradiation loop, already present shielding of the loop and comparable number of 16N decay rates to central channel.

Background: Suicide is a complex phenomenon that is triggered by environmental factors, and probably partially also by genetic code. Genetic studies performed on suicide brain contributed interesting findings on serotonergic, dopaminergic and noradrenergic neurotransmitter systems and on cholesterol system as well as on cell morphology of the brain.Conclusions: Despite numerous results from studies on particular subpopulations (particular psychiatric diseases, gender, etc.) supporting or rejecting association of polymorphisms and suicide, the complexity of suicidal genetics, as in most of the behavioral traits, seems to result as a consequence of more complicated undisclosed mechanisms of interactions of a larger number of genes.

Background: The Marfan syndrome is an autosomal dominant heritable disorder of connective tissue. It is caused by mutations in the fibrillin-1 gene encoding glycoprotein fibrillin-1, a component of microfibrils of extracellular matrix. Patients with Marfan syndrome show wide spectra of clinical signs, primarily on skeletal, cardiovascular and ocular organ systems. Cardiovascular complications (especially aortic aneurysm and aortic dissection) are the most common cause of mortality of Marfan syndrome patients. Discovering genotype-phenotype correlations is complicated because of the large number of mutations reported as well as clinical heterogeneity among individuals with the same mutation. Despite the progress in the knowledge of the molecular nature of Marfan syndrome the diagnosis is still based mainly on the clinical features in the different body systems.Conclusions: Early identification of patient with Marfan syndrome is of considerable importance because of appropriate treatment that can greatly improve life expectancy. Unfortunately, despite the improvement of diagnostic methods, medical and surgical therapy, the mortality due to undiagnosed Marfan syndrome is still high. The present article reviews the molecular genetic studies of Marfan syndrome since the discovery of the mutations in the fibrillin-1 gene.