Search

Simple Summary: Immune checkpoint inhibitors (ICIs) are the most recent breakthrough in cancer treatments. Several drugs have been approved by the FDA including anti-PD-1 antibodies (Nivolumab, Pembrolizumab, and Cemiplimab). Their treatment is most effective for melanoma, non-small cell lung cancer, or bladder cancer. However, ICI response rates are very low for breast cancer patients, even for those with triple negative breast cancer (TNBC) who are expected to be more responsive to ICI treatment. Improved treatments are in demand for patient benefits. Our armed oncolytic virus is one therapeutic agent that can improve the outcome of TNBC treatment, especially in combination with ICIs, as demonstrated by this study. It has been shown that the response rate of TNBC is dependent on the level of PD-L1 and the tumor microenvironment (TME). Approaches that alter the TME can improve the efficacy of ICIs. Background: We have engineered a Smac-armed oncolytic virus by inserting a Smac transgene into the genome of a vesicular stomatitis virus to generate VSV-S. Our previous study shows that the anticancer efficacy of VSV-S is more potent than that of wild-typed VSV in a subcutaneous TNBC mouse model. VSV-S treatment reverts the immunosuppressive TME by reducing MDSCs and TAMs, while increasing infiltration of neutrophils and CD8+ T cells. Methods: VSV-S was used to treat TNBC in an orthotopic mouse model, and in a combination therapy with an anti-PD-1 antibody to treat metastatic TNBC in a mouse model. Changes in the TME were evaluated. Results: In this current study, we show that neoadjuvant VSV-S treatment of primary orthotopic TNBC tumors in mice drastically lowered lung metastasis after surgical removal of the primary tumor, and significantly increased the survival rate. The mechanism of action and changes to the TME were delineated, among which one significant marker is the elevation of PD-L1 expression in tumors. In the TNBC lung metastasis mouse model, pulmonary treatment with VSV-S greatly enhanced the efficacy of ICI treatment. Conclusions: Our results suggest that the combination of oncolytic virus and ICI therapies has the potential to substantially improve the outcome of TNBC treatment. [ABSTRACT FROM AUTHOR]

Traditional vaccines have played an important role in the prevention and treatment of infectious diseases, but they still have problems such as low immunogenicity, poor stability, and difficulty in inducing lasting immune responses. In recent years, the nucleic acid vaccine has emerged as a relatively cheap and safe new vaccine. Compared with traditional vaccines, nucleic acid vaccine has some unique advantages, such as easy production and storage, scalability, and consistency between batches. However, the direct administration of naked nucleic acid vaccine is not ideal, and safer and more effective vaccine delivery systems are needed. With the rapid development of nanocarrier technology, the combination of gene therapy and nanodelivery systems has broadened the therapeutic application of molecular biology and the medical application of biological nanomaterials. Nanoparticles can be used as potential drug-delivery vehicles for the treatment of hereditary and infectious diseases. In addition, due to the advantages of lung immunity, such as rapid onset of action, good efficacy, and reduced adverse reactions, pulmonary delivery of nucleic acid vaccine has become a hot spot in the field of research. In recent years, lipid nanocarriers have become safe, efficient, and ideal materials for vaccine delivery due to their unique physical and chemical properties, which can effectively reduce the toxic side effects of drugs and achieve the effect of slow release and controlled release, and there have been a large number of studies using lipid nanocarriers to efficiently deliver target components into the body. Based on the delivery of tuberculosis (TB) nucleic acid vaccine by lipid carrier, this article systematically reviews the advantages and mechanism of liposomes as a nucleic acid vaccine delivery carrier, so as to lay a solid foundation for the faster and more effective development of new anti-TB vaccine delivery systems in the future. [ABSTRACT FROM AUTHOR]

Background: Phosphodiesterase (PDE) inhibitors are gaining interest in the context of pulmonary pathologies. In particular, the PDE3 inhibitor enoximone (ENXM) has shown potential relative to the cure of asthma, chronic obstructive pulmonary disease (COPD), and acute respiratory distress syndrome (ARDS). Despite its administration via inhalation being planned for use against COVID-19 related ARDS (C-ARDS), presently, no inhalable medicine containing ENXM is available. Objectives: This study aims to develop a new formulation suitable for pulmonary administration of ENXM. Methods: A solution for nebulization, based on the complex between ENXM and Hydroxypropyl-β-Cyclodextrin (HPβCD) (ENXM/HPβCD) is developed. The obtained solution is characterized in terms of aerodynamic distributions and biopharmaceutical features. Results: The evaluation of the aerosol droplets indicates a good bronchi–lung distribution of the drug. Biological evaluations of the air–liquid interface (ALI) in an in vitro lung cell model demonstrates that ENXM/HPβCD is capable of a local direct effect, increasing intracellular cyclic adenosine monophosphate (cAMP) levels and protecting from oxidative stress. Conclusions: This study offers a promising advance in the optimization of enoximone delivery to the lungs. [ABSTRACT FROM AUTHOR]

Drug delivery is essential to provide correct treatments in many ways. The critical points in any drug delivery method are patient compliance, maximum efficacy in therapy, minimum toxicity, and enabling new medical treatments. Pulmonary drug delivery is one way of delivering therapeutics locally and systemically. The lung microenvironment and mechanical and biological barriers must be surpassed for successful drug delivery. This makes the delivery challenging. Formulations that can be delivered through the lung and have a responsive character are of great interest since they can hold the key to the successful delivery of therapeutics. This review has gathered fundamental studies related to materials (polymeric, lipidic, inorganic, and biomolecules) that are responsive to pH, enzymes, ROS, magnetism, and other variables, and it shows the advances and applications in pulmonary drug delivery for different diseases in vitro as well as in vivo. [ABSTRACT FROM AUTHOR]

Background: Current needle-based vaccination for respiratory viruses is ineffective at producing sufficient, long-lasting local immunity in the elderly. Direct pulmonary delivery to the resident local pulmonary immune cells can create long-term mucosal responses. However, criteria for drug vehicle design rules that can overcome age-specific changes in immune cell functions have yet to be established. Results: Here, in vivo charge-based nanoparticle (NP) uptake was compared in mice of two age groups (2- and 16-months) within the four notable pulmonary antigen presenting cell (APC) populations: alveolar macrophages (AM), interstitial macrophages (IM), CD103+ dendritic cells (DCs), and CD11b+ DCs. Both macrophage populations exhibited preferential uptake of anionic nanoparticles but showed inverse rates of phagocytosis between the AM and IM populations across age. DC populations demonstrated preferential uptake of cationic nanoparticles, which remarkably did not significantly change in the aged group. Further characterization of cell phenotypes post-NP internalization demonstrated unique surface marker expression and activation levels for each APC population, showcasing heightened DC inflammatory response to NP delivery in the aged group. Conclusion: The age of mice demonstrated significant preferences in the charge-based NP uptake in APCs that differed greatly between macrophages and DCs. Carefully balance of the targeting and activation of specific types of pulmonary APCs will be critical to produce efficient, age-based vaccines for the growing elderly population. [ABSTRACT FROM AUTHOR]

Asthma is a widespread public health concern, with an increasing incidence. Despite the implementation of current treatment strategies, asthma control, particularly for severe cases, remains suboptimal. Recent research has revealed the encouraging prospects of extracellular vesicles (EVs) secreted by mesenchymal stem cells (MSCs) as a viable therapeutic option for alleviating asthma symptoms. Therefore, the present review aims to provide an overview of the current progress and the therapeutic mechanisms of using MSC-derived EVs (MSC-EVs) for asthma treatment. Additionally, different administration approaches for EVs and their impacts on biodistribution and the curative outcomes of EVs are summarized. Notably, the potential benefits of nebulized inhalation of MSC-EVs are addressed. Also, the possibilities and challenges of using MSC-EVs for asthma treatment in clinics are highlighted. Overall, this review is intended to give new insight into the utilization of MSC-EVs as a potential biological drug for asthma treatment. [ABSTRACT FROM AUTHOR]

The identification of spray-drying processing parameters capable of producing particles suitable for pulmonary inhalation with retained bioactivity underpins the development of inhalable biotherapeutics. Effective delivery of biopharmaceuticals via pulmonary delivery routes such as dry powder inhalation (DPI) requires developing techniques that engineer particles to well-defined target profiles while simultaneously minimising protein denaturation. This study examines the simultaneous effects of atomisation gas flow rate on particle properties and retained bioactivity for the model biopharmaceutical lysozyme. The results show that optimising the interplay between atomisation gas flow rate and excipient concentration enables the production of free-flowing powder with retained bioactivity approaching 100%, moisture content below 4%, and D50 < 4 µm, at yields exceeding 50%. The developed methodologies inform the future design of protein-specific spray-drying parameters for inhalable biotherapeutics. [ABSTRACT FROM AUTHOR]

To improve the therapeutic activity of inhaled glucocorticoids and reduce potential side effects, we designed a formulation combining the advantages of nanoparticles, which have an enhanced uptake by alveolar cells, allow targeted delivery and sustained drug release, as well as limited drug systemic passage, with those of microparticles, which display good alveolar deposition. Herein, a polymer-drug conjugate, poly(malic acid)-budesonide (PMAB), was first synthesized with either 11, 20, 33, or 43 mol% budesonide (drug:polymer from 1:8 to 3:4), the drug creating hydrophobic domains. The obtained conjugates self-assemble into nanoconjugates in water, yielding excellent drug loading of up to 73 wt%, with 80–100 nm diameters. In vitro assays showed that budesonide could be steadily released from the nanoconjugates, and the anti-inflammatory activity was preserved, as evidenced by reduced cytokine production in LPS-activated RAW 264.7 macrophages. Nanoconjugates were then embedded into microparticles through spray-drying with L-leucine, forming nano-embedded microparticles (NEMs). NEMs were produced with an aerodynamic diameter close to 1 µm and a density below 0.1 g.cm−3, indicative of a high alveolar deposition. NEMs spray-dried with the less hydrophobic nanoconjugates, PMAB 1:4, were readily dissolved in simulated lung fluid and were chosen for in vivo experiments to study pharmacokinetics in healthy rats. As it was released in vivo from NEMs, sustained distribution of budesonide was obtained for 48 h in lung tissue, cells, and lining fluid. With high loading rates, modulable release kinetics, and low cytotoxicity, these nanoconjugates delivered by NEMs are promising for the more efficient treatment of pulmonary inflammatory diseases. [ABSTRACT FROM AUTHOR]

Abstract Background Current needle-based vaccination for respiratory viruses is ineffective at producing sufficient, long-lasting local immunity in the elderly. Direct pulmonary delivery to the resident local pulmonary immune cells can create long-term mucosal responses. However, criteria for drug vehicle design rules that can overcome age-specific changes in immune cell functions have yet to be established. Results Here, in vivo charge-based nanoparticle (NP) uptake was compared in mice of two age groups (2- and 16-months) within the four notable pulmonary antigen presenting cell (APC) populations: alveolar macrophages (AM), interstitial macrophages (IM), CD103+ dendritic cells (DCs), and CD11b+ DCs. Both macrophage populations exhibited preferential uptake of anionic nanoparticles but showed inverse rates of phagocytosis between the AM and IM populations across age. DC populations demonstrated preferential uptake of cationic nanoparticles, which remarkably did not significantly change in the aged group. Further characterization of cell phenotypes post-NP internalization demonstrated unique surface marker expression and activation levels for each APC population, showcasing heightened DC inflammatory response to NP delivery in the aged group. Conclusion The age of mice demonstrated significant preferences in the charge-based NP uptake in APCs that differed greatly between macrophages and DCs. Carefully balance of the targeting and activation of specific types of pulmonary APCs will be critical to produce efficient, age-based vaccines for the growing elderly population. Graphical Abstract

Drug delivery is essential to provide correct treatments in many ways. The critical points in any drug delivery method are patient compliance, maximum efficacy in therapy, minimum toxicity, and enabling new medical treatments. Pulmonary drug delivery is one way of delivering therapeutics locally and systemically. The lung microenvironment and mechanical and biological barriers must be surpassed for successful drug delivery. This makes the delivery challenging. Formulations that can be delivered through the lung and have a responsive character are of great interest since they can hold the key to the successful delivery of therapeutics. This review has gathered fundamental studies related to materials (polymeric, lipidic, inorganic, and biomolecules) that are responsive to pH, enzymes, ROS, magnetism, and other variables, and it shows the advances and applications in pulmonary drug delivery for different diseases in vitro as well as in vivo.

Fenton reaction centered ferroptosis-apoptosis synergetic therapy has emerged as a promising tumor elimination strategy. However, the low intracellular Fenton level and accumulation of therapeutics at the lesion site greatly limit the efficacy of ferroptosis therapy. To overcome these two bottlenecks, an inhalable metal polyphenol network (MPN)-hybrid liposome, encoded as LDG, was proposed for enhancing the intracellular Fenton reaction level by co-delivering the ferroptosis inducer dihydroartemisinin (DHA) and the ferrous ion (Fe2+) donor MPN. The synthesized LDG had excellent nebulization performance which significantly improved the accumulation in the lungs, about 8.2 times of intravenous injection. In terms of anticancer mechanisms, MPN raised the intracellular level of Fe2+ by constructing iron cycling in the weakly acidic environment of tumors. Triggered by Fe2+, DHA with peroxide-bridge structure underwent a high level of Fenton-like reaction, promoted the production of intracellular reactive oxygen species (ROS) and induced strong ferroptosis while cooperating with apoptosis. LDG exhibited extraordinary antitumor ability in an orthotopic lung tumor model, whose tumor inhibition efficiency was 1.53 (P = 0.0014) and 1.32 (P = 0.0183) times of the LG group (liposomes coated with gallic acid (GA)-Fe MPN) and LD group (liposomes loaded with DHA), respectively, showing the strongest anticancer effect. In conclusion, the constructed MPN-hybrid liposomes could be a potent custom nanoplatform for pulmonary delivery and underscored the great potential of ferroptosis-apoptosis synergetic therapy. [ABSTRACT FROM AUTHOR]

Pulmonary delivery of therapeutic agents has been considered the desirable administration route for local lung disease treatment. As the latest generation of therapeutic agents, nucleic acid has been gradually developed as gene therapy for local diseases such as asthma, chronic obstructive pulmonary diseases, and lung fibrosis. The features of nucleic acid, specific physiological structure, and pathophysiological barriers of the respiratory tract have strongly affected the delivery efficiency and pulmonary bioavailability of nucleic acid, directly related to the treatment outcomes. The development of pharmaceutics and material science provides the potential for highly effective pulmonary medicine delivery. In this review, the key factors and barriers are first introduced that affect the pulmonary delivery and bioavailability of nucleic acids. The advanced inhaled materials for nucleic acid delivery are further summarized. The recent progress of platform designs for improving the pulmonary delivery efficiency of nucleic acids and their therapeutic outcomes have been systematically analyzed, with the application and the perspectives of advanced vectors for pulmonary gene delivery. [ABSTRACT FROM AUTHOR]

Protein‐based therapeutics and vaccines play a pivotal role in the realm of biomedical science. Pulmonary administration offers several advantages including rapid adsorption, non‐invasive, increased local drug concentration, and bypassed first‐pass metabolism, thus holding great potential to address multiple unmet medical needs in lung‐related diseases and vaccination. However, the limited success of inhaled proteins in clinical settings highlights the challenges associated with protein stability and the physiological barriers within the respiratory system. To overcome these hurdles, a variety of delivery systems including polymers, liposomes, cell‐derived membranes, and inorganic materials are developed to improve the stability, mucus penetration, retention time, and bioavailability of proteins. With the outbreak of COVID‐19, the pulmonary administration of proteins has drawn great attention. In this review, the design principle, preparation, biomedical application, progress in clinical translation, advantages, and disadvantages of each kind of delivery system are summarized, with an emphasis on carrier materials. [ABSTRACT FROM AUTHOR]

Abstract Background Nanoparticles exhibit distinct behaviours within the body, depending on their physicochemical properties and administration routes. However, in vivo behaviour of poly(lactic-co-glycolic acid) (PLGA) nanoparticles, especially when administered nasally, remains unexplored; furthermore, there is a lack of comparative analysis of uptake efficiency among different administration routes. Therefore, here, we aimed to comprehensively investigate the real-time in vivo behaviour of PLGA nanoparticles across various administration routes. PLGA-NH2 nanoparticles of three sizes were synthesised using an oil-in-water single-emulsion method. We assessed their uptake by murine macrophage RAW264.7 cells using fluorescence microscopy. To enable real-time tracking, we conjugated p-SCN-Bn-deferoxamine to PLGA-NH2 nanoparticles and further radiolabelled them with 89Zr-oxalate before administration to mice via different routes. Nanoparticle internalisation by lung immune cells was monitored using fluorescence-activated cell sorting analysis. Results The nanoparticle sizes were 294 ± 2.1 (small), 522.5 ± 5.58 (intermediate), and 850 ± 18.52 nm (large). Fluorescent labelling did not significantly alter the nanoparticle size and charge. The level of uptake of small and large nanoparticles by RAW264.7 cells was similar, with phagocytosis inhibition primarily reducing the internalisation of large particles. Positron emission tomography revealed that intranasal delivery resulted in the highest and most targeted pulmonary uptake, whereas intravenous administration led to accumulation mainly in the liver and spleen. Nasal delivery of large nanoparticles resulted in enhanced uptake by myeloid immune cells relative to lymphoid cells, whereas dendritic cell uptake initially peaked but declined over time. Conclusions Our study provides valuable insights into advancing nanomedicine and drug delivery, with the potential for expanding the clinical applications of nanoparticles.

Respiratory tract infections caused by multi-drug-resistant (MDR) bacteria have been a severe risk to human health. Colistin is often used to treat the MDR Gram-negative bacterial infections as a last-line therapy. Inhaled colistin can achieve a high concentration in the lung but none of aerosolized colistin products has been approved in the USA. Liposome has been reported as an advantageous formulation strategy for antibiotics due to its controlled release profile and biocompatibility. We have developed colistin liposomal formulations in our previous study. In the present study, the cellular uptake and transport of colistin in colistin liposomes were examined in two human lung epithelium in vitro models, Calu-3 monolayer and EpiAirway 3D tissue models. In both models, cellular uptake (p < 0.05) and cellular transport (p < 0.01) of colistin were significantly reduced by the colistin liposome compared to the colistin solution. Our findings indicate that inhaled colistin liposomes could be a promising treatment for extracellular bacterial lung infections caused by MDR Pseudomonas aeruginosa (P. aeruginosa). [ABSTRACT FROM AUTHOR]

Background: Nanoparticles exhibit distinct behaviours within the body, depending on their physicochemical properties and administration routes. However, in vivo behaviour of poly(lactic-co-glycolic acid) (PLGA) nanoparticles, especially when administered nasally, remains unexplored; furthermore, there is a lack of comparative analysis of uptake efficiency among different administration routes. Therefore, here, we aimed to comprehensively investigate the real-time in vivo behaviour of PLGA nanoparticles across various administration routes. PLGA-NH2 nanoparticles of three sizes were synthesised using an oil-in-water single-emulsion method. We assessed their uptake by murine macrophage RAW264.7 cells using fluorescence microscopy. To enable real-time tracking, we conjugated p-SCN-Bn-deferoxamine to PLGA-NH2 nanoparticles and further radiolabelled them with 89Zr-oxalate before administration to mice via different routes. Nanoparticle internalisation by lung immune cells was monitored using fluorescence-activated cell sorting analysis. Results: The nanoparticle sizes were 294 ± 2.1 (small), 522.5 ± 5.58 (intermediate), and 850 ± 18.52 nm (large). Fluorescent labelling did not significantly alter the nanoparticle size and charge. The level of uptake of small and large nanoparticles by RAW264.7 cells was similar, with phagocytosis inhibition primarily reducing the internalisation of large particles. Positron emission tomography revealed that intranasal delivery resulted in the highest and most targeted pulmonary uptake, whereas intravenous administration led to accumulation mainly in the liver and spleen. Nasal delivery of large nanoparticles resulted in enhanced uptake by myeloid immune cells relative to lymphoid cells, whereas dendritic cell uptake initially peaked but declined over time. Conclusions: Our study provides valuable insights into advancing nanomedicine and drug delivery, with the potential for expanding the clinical applications of nanoparticles. [ABSTRACT FROM AUTHOR]

Faced with the threat of lung cancer-related deaths worldwide, small interfering RNA (siRNA) can silence tumor related messenger RNA (mRNA) to tackle the issue of drug resistance with enhanced anti-tumor effects. However, how to increase lung tumor targeting and penetration with enhanced gene silencing are the issues to be addressed. Thus, the objective of this study is to explore the feasibility of designing non-viral siRNA vectors for enhanced lung tumor therapy via inhalation. Here, shell-core based polymer-lipid hybrid nanoparticles (HNPs) were prepared via microfluidics by coating PLGA on siRNA-loaded cationic liposomes (Lipoplexes). Transmission electron microscopy and energy dispersive spectroscopy study demonstrated that HNP consists of a PLGA shell and a lipid core. Atomic force microscopy study indicated that the rigidity of HNPs could be well tuned by changing thickness of the PLGA shell. The designed HNPs were muco-inert with increased stability in mucus and BALF, good safety, enhanced mucus penetration and cellular uptake. Crucially, HNP1 with the thinnest PLGA shell exhibited superior transfection efficiency (84.83%) in A549 cells, which was comparable to that of lipoplexes and Lipofectamine 2000, and its tumor permeability was 1.88 times that of lipoplexes in A549-3T3 tumor spheroids. After internalization of the HNPs, not only endosomal escape but also lysosomal exocytosis was observed. The transfection efficiency of HNP1 (39.33%) was 2.26 times that of lipoplexes in A549-3T3 tumor spheroids. Moreover, HNPs exhibited excellent stability during nebulization via soft mist inhaler. In conclusion, our study reveals the great potential of HNP1 in siRNA delivery for lung cancer therapy via inhalation. [Display omitted] [ABSTRACT FROM AUTHOR]

Lung inflammation and fibrogenesis are the two main characteristics during the development of pulmonary fibrosis (PF), which are particularly associated with pulmonary macrophages. In this context, whether cryptotanshinone (CTS) could alleviate PF through regulating macrophage polarization were preliminarily demonstrated in vitro. Then the time course of PF and its relationship with macrophage polarization was determined in BLM-induced mice based on cytokine levels in bronchoalveolar lavage fluid (BALF), lung histopathology, flow cytometric analysis, mRNA and protein expression. CTS was loaded into macrophage-targeted and responsively released mannose-modified liposomes (Man-lipo), and the liposomes were then embedded into mannitol microparticles (M-MPs) using spray drying to achieve efficient pulmonary delivery. Afterwards, how CTS regulates macrophage polarization in vivo during different time courses of PF was probed. Furthermore, the molecular mechanisms of CTS against PF by regulating macrophage polarization were elucidated in vivo and in vitro. The full-course therapy group could achieve comparable therapeutic effects compared with the positive control drug PFD group. CTS can alleviate PF through regulating macrophage polarization, mainly by inhibiting NLRP3/TGF-β1 pathway during the inflammation course and modulating MMP-9/TIMP-1 balance during the fibrosis development course, providing new insights into chronic PF treatment. [Display omitted] • l The time course of PF development was established using BLM-induced mice, and its relationship with macrophage polarization was determined using a flow cytometer. • l Cryptotanshinone (CTS) was loaded into macrophage targeting and responsive released liposomes, and then the liposomes were incorporated into microparticles using spray drying for efficient pulmonary delivery. • l CTS could reverse LPS-induced polarization of M1 macrophages toward M2, and meanwhile, limit IL-4-triggered polarization of M2, which was consistent with animal results. • l The anti-PF efficacy of CTS through regulating macrophage polarization was confirmed in vitro and in vivo. The full-course therapy group could achieve comparable therapeutic effects with positive control drug PFD group. • l CTS could effectively alleviate PF by regulating macrophage polarization, including inhibiting NLRP3/TGF-β1 pathway during the inflammation course and modulating MMP-9/TIMP-1 balance during the fibrosis development course. [ABSTRACT FROM AUTHOR]

In the past decade RNA-based therapies such as small interfering RNA (siRNA) and messenger RNA (mRNA) have emerged as new and ground-breaking therapeutic agents for the treatment and prevention of many conditions from viral infection to cancer. Most clinically approved RNA therapies are parenterally administered which impacts patient compliance and adds to healthcare costs. Pulmonary administration via inhalation is a non-invasive means to deliver RNA and offers an attractive alternative to injection. Nebulisation is a particularly appealing method due to the capacity to deliver large RNA doses during tidal breathing. In this review, we discuss the unique physiological barriers presented by the lung to efficient nebulised RNA delivery and approaches adopted to circumvent this problem. Additionally, the different types of nebulisers are evaluated from the perspective of their suitability for RNA delivery. Furthermore, we discuss recent preclinical studies involving nebulisation of RNA and analysis in in vitro and in vivo settings. Several studies have also demonstrated the importance of an effective delivery vector in RNA nebulisation therefore we assess the variety of lipid, polymeric and hybrid-based delivery systems utilised to date. We also consider the outlook for nebulised RNA medicinal products and the hurdles which must be overcome for successful clinical translation. In summary, nebulised RNA delivery has demonstrated promising potential for the treatment of several lung-related conditions such as asthma, COPD and cystic fibrosis, to which the mode of delivery is of crucial importance for clinical success. [Display omitted] [ABSTRACT FROM AUTHOR]

Protein‐based therapeutics and vaccines play a pivotal role in the realm of biomedical science. Pulmonary administration offers several advantages including rapid adsorption, non‐invasive, increased local drug concentration, and bypassed first‐pass metabolism, thus holding great potential to address multiple unmet medical needs in lung‐related diseases and vaccination. However, the limited success of inhaled proteins in clinical settings highlights the challenges associated with protein stability and the physiological barriers within the respiratory system. To overcome these hurdles, a variety of delivery systems including polymers, liposomes, cell‐derived membranes, and inorganic materials are developed to improve the stability, mucus penetration, retention time, and bioavailability of proteins. With the outbreak of COVID‐19, the pulmonary administration of proteins has drawn great attention. In this review, the design principle, preparation, biomedical application, progress in clinical translation, advantages, and disadvantages of each kind of delivery system are summarized, with an emphasis on carrier materials.

Abstract Pulmonary delivery of therapeutic agents has been considered the desirable administration route for local lung disease treatment. As the latest generation of therapeutic agents, nucleic acid has been gradually developed as gene therapy for local diseases such as asthma, chronic obstructive pulmonary diseases, and lung fibrosis. The features of nucleic acid, specific physiological structure, and pathophysiological barriers of the respiratory tract have strongly affected the delivery efficiency and pulmonary bioavailability of nucleic acid, directly related to the treatment outcomes. The development of pharmaceutics and material science provides the potential for highly effective pulmonary medicine delivery. In this review, the key factors and barriers are first introduced that affect the pulmonary delivery and bioavailability of nucleic acids. The advanced inhaled materials for nucleic acid delivery are further summarized. The recent progress of platform designs for improving the pulmonary delivery efficiency of nucleic acids and their therapeutic outcomes have been systematically analyzed, with the application and the perspectives of advanced vectors for pulmonary gene delivery.

Andrographolide is a plant-based compound that showed promising activity against lung cancer. However, the compound's poor water solubility and low bioavailability limit its oral administration. Inhaled drug delivery of andrographolide is highly favourable as it delivers active ingredients directly into the affected lungs. In the current study, we compared in vitro aerosol performance, anti-cancer activity and storages stability of two (2) inhalable andrographolide formulations. Formulation 1 was prepared using precipitation and spray drying techniques, while Formulation 2 was prepared via direct spray drying technique. Drug morphology and physicochemical properties were confirmed using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. In vitro aerosol dispersion profile was evaluated using the next-generation impactor (NGI). Formulation 1 consisted of elongated crystals while Formulation 2 was made up of amorphous spherical particles. Both formulations had an inhalable fraction (

Xu Zuo,1 Yinuo Gu,1 Xiaoping Guo,1 Wenxue Zheng,1 Haoyu Zheng,1 Yiming An,1 Caina Xu,2,3 Fang Wang1,3 1Department of Pathogeny Biology, College of Basic Medical Sciences, Jilin University, Changchun, 130021, People’s Republic of China; 2Department of Biochemistry, College of Basic Medical Sciences, Jilin University, Changchun, 130021, People’s Republic of China; 3Key Laboratory of Pathobiology, Ministry of Education, Jilin University, Changchun, 130021, People’s Republic of ChinaCorrespondence: Caina Xu; Fang Wang, Email xucaina@jlu.edu.cn; wf@jlu.edu.cnPurpose: Inhaled corticosteroids, including budesonide (BUD), are widely employed for the treatment of asthma. However, the frequent use of corticosteroids is associated with numerous adverse effects and poses challenges to ongoing drug therapy and patient adherence. Budesonide liposomal nanoparticles (BUD-LNPs) were developed to improve the bioavailability of the drug and thereby improve the effectiveness of asthma treatment.Methods: BUD-LNPs were prepared via thin-film hydration, and the characterizations, stability, and in vitro release of BUD-LNPs were studied. In vitro cellular uptake was observed by laser-scanning confocal microscope (LSCM) and flow cytometry. And the in vitro anti-inflammatory activity of BUD-LNPs was evaluated by measuring the expression of pro-inflammatory cytokines in activated macrophages. Besides, the accumulation time in the lung of drugs delivered via liposomal carriers and free drugs was compared in vivo. And the in vivo therapeutic efficacy of BUD-LNPs was assessed in OVA-induced asthmatic mice. Finally, in vivo biosafety assessment was performed.Results: The particle size, PDI, and zeta potential of BUD-LNPs were 127.63± 1.33 nm, 0.27± 0.02, and 3.33± 0.13 mV, respectively. BUD-LNPs exhibited excellent biosafety and anti-inflammatory activity in vitro. Furthermore, compared with the free drugs, the utilization of liposomal nano-vehicles for drugs delivery could effectively extend the duration of drugs accumulation in the pulmonary system. Additionally, treatment with BUD-LNPs alleviated airway hyperresponsiveness, reduced airway mucus secretion, and mitigated pulmonary inflammation in OVA-induced asthmatic mice. And the BUD-LNPs demonstrated superior therapeutic efficacy compared to free BUD.Conclusion: BUD-LNPs was successfully prepared with excellent stability and sustained release for 24 h in vitro. The data of anti-inflammatory activity, asthma therapeutic effects and safety studies indicated that drug delivery mediated by liposomal nano-vehicles was a feasible and desirable strategy for medical strategy and showed great promise in the clinical therapy of asthma.Keywords: liposomal nanoparticles, asthma, budesonide, pulmonary delivery, nano-vehicles

Background: Phosphodiesterase (PDE) inhibitors are gaining interest in the context of pulmonary pathologies. In particular, the PDE3 inhibitor enoximone (ENXM) has shown potential relative to the cure of asthma, chronic obstructive pulmonary disease (COPD), and acute respiratory distress syndrome (ARDS). Despite its administration via inhalation being planned for use against COVID-19 related ARDS (C-ARDS), presently, no inhalable medicine containing ENXM is available. Objectives: This study aims to develop a new formulation suitable for pulmonary administration of ENXM. Methods: A solution for nebulization, based on the complex between ENXM and Hydroxypropyl-β-Cyclodextrin (HPβCD) (ENXM/HPβCD) is developed. The obtained solution is characterized in terms of aerodynamic distributions and biopharmaceutical features. Results: The evaluation of the aerosol droplets indicates a good bronchi–lung distribution of the drug. Biological evaluations of the air–liquid interface (ALI) in an in vitro lung cell model demonstrates that ENXM/HPβCD is capable of a local direct effect, increasing intracellular cyclic adenosine monophosphate (cAMP) levels and protecting from oxidative stress. Conclusions: This study offers a promising advance in the optimization of enoximone delivery to the lungs.

The identification of spray-drying processing parameters capable of producing particles suitable for pulmonary inhalation with retained bioactivity underpins the development of inhalable biotherapeutics. Effective delivery of biopharmaceuticals via pulmonary delivery routes such as dry powder inhalation (DPI) requires developing techniques that engineer particles to well-defined target profiles while simultaneously minimising protein denaturation. This study examines the simultaneous effects of atomisation gas flow rate on particle properties and retained bioactivity for the model biopharmaceutical lysozyme. The results show that optimising the interplay between atomisation gas flow rate and excipient concentration enables the production of free-flowing powder with retained bioactivity approaching 100%, moisture content below 4%, and D50 < 4 µm, at yields exceeding 50%. The developed methodologies inform the future design of protein-specific spray-drying parameters for inhalable biotherapeutics.

Pulmonary inflammations such as chronic obstructive pulmonary disease and cystic fibrosis are widespread and can be fatal, especially when they are characterized by abnormal mucus accumulation. Inhaled corticosteroids are commonly used for lung inflammations despite their considerable side effects. By utilizing particle engineering techniques, a combined dry powder inhaler (DPI) comprising nanosized ketoprofen-embedded mannitol-coated microparticles was developed. A nanoembedded microparticle system means a novel advance in pulmonary delivery by enhancing local pulmonary deposition while avoiding clearance mechanisms. Ketoprofen, a poorly water-soluble anti-inflammatory drug, was dispersed in the stabilizer solution and then homogenized by ultraturrax. Following this, a ketoprofen-containing nanosuspension was produced by wet-media milling. Furthermore, co-spray drying was conducted with L-leucine (dispersity enhancer) and mannitol (coating and mucuactive agent). Particle size, morphology, dissolution, permeation, viscosity, in vitro and in silico deposition, cytotoxicity, and anti-inflammatory effect were investigated. The particle size of the ketoprofen-containing nanosuspension was ~230 nm. SEM images of the spray-dried powder displayed wrinkled, coated, and nearly spherical particles with a final size of ~2 µm (nano-in-micro), which is optimal for pulmonary delivery. The mannitol-containing samples decreased the viscosity of 10% mucin solution. The results of the mass median aerodynamic diameter (2.4–4.5 µm), fine particle fraction (56–71%), permeation (five-fold enhancement), and dissolution (80% release in 5 min) confirmed that the system is ideal for local inhalation. All samples showed a significant anti-inflammatory effect and decreased IL-6 on the LPS-treated U937 cell line with low cytotoxicity. Hence, developing an innovative combined DPI comprising ketoprofen and mannitol by employing a nano-in-micro approach is a potential treatment for lung inflammations. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to understand how coating with a pulmonary surfactant, namely Alveofact, affects the physicochemical parameters as well as in vitro behavior of polyethylenimine (PEI) polyplexes for pulmonary siRNA delivery. Methods: Alveofact-coated polyplexes were prepared at different Alveofact:PEI coating ratios and analyzed in terms of size, PDI and zeta potential as well as morphology by transmission electron microscopy. The biological behavior was evaluated in a lung epithelial cell line regarding cell viability, cellular uptake via flow cytometry and gene downregulation by qRT-PCR. Furthermore, a 3D ALI culture model was established to test the mucus diffusion and cellular uptake by confocal microscopy as well as gene silencing activity by qRT-PCR. Results: After optimizing the coating process by testing different Alveofact:PEI coating ratios, a formulation with suitable parameters for lung delivery was obtained. In lung epithelial cells, Alveofact-coated polyplexes were well tolerated and internalized. Furthermore, the coating improved the siRNA-mediated gene silencing efficiency. Alveofact-coated polyplexes were then tested on a 3D air-liquid interface (ALI) culture model that, by expressing tight junctions and secreting mucus, resembles important traits of the lung epithelium. Here, we identified the optimal Alveofact:PEI coating ratio to achieve diffusion through the mucus layer while retaining gene silencing activity. Interestingly, the latter underlined the importance of establishing appropriate in vitro models to achieve more consistent results that better predict the in vivo activity. Conclusion: The addition of a coating with pulmonary surfactant to polymeric cationic polyplexes represents a valuable formulation strategy to improve local delivery of siRNA to the lungs. [ABSTRACT FROM AUTHOR]

Pulmonary drug delivery system is one of the most intriguing and beneficial route for drug delivery as it offers several advantages over the conventional oral route of administration. Many devices are being studied to achieve optimum drug delivery through pulmonary route. Nebulizers, dry powder inhalers, pressurized metered dose inhalers are developed and marketed to target delivery through the pulmonary system. Nebulizers are devices which convert liquid into aerosols of appropriate size for inhalation which can efficiently reach the pulmonary region. The different types of nebulizers include jet nebulizer, ultrasonic nebulizer, vibrating mesh nebulizer. They are further subdivided according to the modification in their structure. The advancement in science has led to the development of more ‘intelligent nebulizers’ which include I-neb nebulizer and AKITA nebulizer, they monitor the breathing pattern of the patient and release the drug accordingly resulting in minimal wastage of the drug. Nebulizers sales have shown growth in the market owing to an increase in the incidences of chronic obstructive pulmonary disorder, asthma in the young and elderly, thus, a combination of smart nebulizer and microparticle formulation will help in achieving the desired results. [ABSTRACT FROM AUTHOR]

Although our understanding of lung cancer has significantly improved in the past decade, it is still a disease with a high incidence and mortality rate. The key reason is that the efficacy of the therapeutic drugs is limited, mainly due to insufficient doses of drugs delivered to the lungs. To achieve precise lung cancer diagnosis and treatment, nano‐particles (NPs) pulmonary delivery techniques have attracted much attention and facilitate the exploration of the potential of those in inhalable NPs targeting tumor lesions. Since the therapeutic research focusing on pulmonary delivery NPs has rapidly developed and evolved substantially, this review will mainly discuss the current developments of pulmonary delivery NPs for precision lung cancer diagnosis and therapy. This article is categorized under:Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory DiseaseTherapeutic Approaches and Drug Discovery > Emerging TechnologiesDiagnostic Tools > In Vivo Nanodiagnostics and Imaging [ABSTRACT FROM AUTHOR]

[Display omitted] In an ideal world, pharmaceutical drugs would have infinite shelf life, no susceptibility to degradation, chemical reactions or loss of efficacy. In reality, these processes occur, however, making it desirable to extend a drugs' shelf life. Nucleic acid-based drugs are most commonly stored as aqueous suspension where they are vulnerable to microbial growth and degradation processes. Drying procedures, such as lyophilization and spray drying, help to reduce the products' residual moisture while increasing the products' shelf life and stability. The present study was designed to evaluate 90 days of storage of spray-dried siRNA-lipid nanoparticles (LNPs) at 4 °C and 25 °C. An updated Onpattro® composition modified with a positively charged helper lipid was used as the LNP carrier system. In an attempt to further reduce the residual moisture of our previously reported formulations, all LNP samples were subjected to a secondary drying step in the spray drying tower for 20 min. The measurement of physicochemical properties of spray-dried and subsequently dried LNPs resulted in sizes of 180 nm, PDI values of 0.1–0.15 and zeta potentials of + 3 mV. Spray drying resulted in residual moisture levels of 3.6–4 % and was reduced by subsequent drying to 2.8–3.1 %. Aerodynamic properties after storage showed discrepancies depending on the storage conditions. MMADs remained at 2.8 µm when stored at 4 °C, whereas an increase to 5 µm at 25 °C was observed. Subsequent drying led to sizes of 3.6–3.8 µm, independent of the storage conditions. Spray-dried LNPs maintained bioactivity resulting in > 95 % protein downregulation and confirming the lack of cytotoxic effects in a lung adenocarcinoma cell line. Furthermore, the spray-dried and subsequently dried LNPs stored for 3 months at 4 °C and 25 °C achieved up to 50 % gene silencing of the house-keeping gene GAPDH after deposition on the mucus layer of Calu-3 cells. This study confirms the stability of spray-dried and subsequently dried LNPs over at least 90 days at 4 °C and 25 °C emphasizing the potential of dry powder inhalation of RNA-loaded LNPs as a therapy option for pulmonary diseases. [ABSTRACT FROM AUTHOR]

Respirable particles are integral to effective inhalable therapeutic ingredient delivery, demanding precise engineering for optimal lung deposition and therapeutic efficacy. This review describes different physicochemical properties and their role in determining the aerodynamic performance and therapeutic efficacy of dry powder formulations. Furthermore, advances in top-down and bottom-up techniques in particle preparation, highlighting their roles in tailoring particle properties and optimizing therapeutic outcomes, are also presented. Practices adopted for particle engineering during the past 100 years indicate a significant transition in research and commercial interest in the strategies used, with several innovative concepts coming into play in the past decade. Accordingly, this article highlights futuristic particle engineering approaches such as electrospraying, inkjet printing, thin film freeze drying, and supercritical processes, including their prospects and associated challenges. With such technologies, it is possible to reshape inhaled therapeutic ingredient delivery, optimizing therapeutic benefits and improving the quality of life for patients with respiratory diseases and beyond. [ABSTRACT FROM AUTHOR]

In this review, an extensive analysis of dry powder inhalers (DPIs) is offered, focusing on their characteristics, formulation, stability, and manufacturing. The advantages of pulmonary delivery were investigated, as well as the significance of the particle size in drug deposition. The preparation of DPI formulations was also comprehensively explored, including physico-chemical characterization of powders, powder processing techniques, and formulation considerations. In addition to manufacturing procedures, testing methods were also discussed, providing insights into the development and evaluation of DPI formulations. This review also explores the design basics and critical attributes specific to DPIs, highlighting the significance of their optimization to achieve an effective inhalation therapy. Additionally, the morphology and stability of 3 DPI capsules (Spiriva, Braltus, and Onbrez) were investigated, offering valuable insights into the properties of these formulations. Altogether, these findings contribute to a deeper understanding of DPIs and their development, performance, and optimization of inhalation dosage forms. [ABSTRACT FROM AUTHOR]

Although mRNA lipid nanoparticles (LNPs) are highly effective as vaccines, their efficacy for pulmonary delivery has not yet fully been established. A major barrier to this therapeutic goal is their instability during aerosolization for local delivery. This imparts a shear force that degrades the mRNA cargo and therefore reduces cell transfection. In addition to remaining stable upon aerosolization, mRNA LNPs must also possess the aerodynamic properties to achieve deposition in clinically relevant areas of the lungs. We addressed these challenges by formulating mRNA LNPs with SM‐102, the clinically approved ionizable lipid in the Spikevax COVID‐19 vaccine. Our lead candidate, B‐1, had the highest mRNA expression in both a physiologically relevant air–liquid interface (ALI) human lung cell model and in healthy mice lungs upon aerosolization. Further, B‐1 showed selective transfection in vivo of lung epithelial cells compared to immune cells and endothelial cells. These results show that the formulation can target therapeutically relevant cells in pulmonary diseases such as cystic fibrosis. Morphological studies of B‐1 revealed differences in the surface structure compared to LNPs with lower transfection efficiency. Importantly, the formulation maintained critical aerodynamic properties in simulated human airways upon next generation impaction. Finally, structure–function analysis of SM‐102 revealed that small changes in the number of carbons can improve upon mRNA delivery in ALI human lung cells. Overall, our study expands the application of SM‐102 and its analogs to aerosolized pulmonary delivery and identifies a potent lead candidate for future therapeutically active mRNA therapies. [ABSTRACT FROM AUTHOR]

Nanocarrier-assisted pulmonary drug delivery system has been widely employed for lung local disease treatment due to its enhanced drug lesion accumulation and reduced systematical side effects. However, the mucus barriers covered on the epithelia of trachea and bronchial tree construct a dense barrier for inhaled nanocarrier transport, which compromises the therapeutical effects. In this study, a lipid liquid crystalline nanoparticle NLP@Z with surface zwitterion material hexadecyl betaine (HB) modification and N-acetylcysteine (NAC) encapsulation was presented to exert the combination strategy of mucus-inert surface and mucus degradation. The HB modification endowed NLP@Z mucus-inert surface to inhibit the interaction between NLP@Z and mucins, and the encapsulated NAC could effectively degrade the mucins and further decrease the mucus viscosity. This combination strategy was proved to significantly promote the mucus penetration performance and enhance epithelial cell uptake. In addition, the proposed NLP@Z was equipped with desired nebulization property, which could be served as a potential pulmonary delivery nanoplatform. In summary, the proposed NLP@Z highlights the employment of the combination strategy for mucus penetration enhancement in pulmonary delivery, which may become a versatile platform for lung disease therapy. [ABSTRACT FROM AUTHOR]

A table-top microdevice was introduced in this work to produce ultrasmall particles for drug delivery via inhalation. The design and operation are similar to that of spray-drying equipment used in industry, but the device itself is much smaller and more portable in size, simpler to operate and more economical. More importantly, the device enables more accurate control over particle size. Using Flavopiridol, an anti-inflammation medication, formulations have been developed to produce inhalable particles for pulmonary delivery. A solution containing the desired components forms droplets by passing through an array of micro-apertures that vibrate via a piezo-electrical driver. High-purity nitrogen gas was introduced and flew through the designed path, which included the funnel collection and cyclone chamber, and finally was pumped away. The gas carried and dried the micronized liquid droplets along the pathway, leading to the precipitation of dry solid microparticles. The formation of the cyclone was essential to assure the sufficient travel path length of the liquid droplets to allow drying. Synthesis parameters were optimized to produce microparticles, whose morphology, size, physio-chemical properties, and release profiles met the criteria for inhalation. Bioactivity assays have revealed a high degree of anti-inflammation. The above-mentioned approach enabled the production of inhalable particles in research laboratories in general, using the simple table-top microdevice. The microparticles enable the inhalable delivery of anti-inflammation medicine to the lungs, thus providing treatment for diseases such as pulmonary fibrosis and COVID-19.

Abstract Although mRNA lipid nanoparticles (LNPs) are highly effective as vaccines, their efficacy for pulmonary delivery has not yet fully been established. A major barrier to this therapeutic goal is their instability during aerosolization for local delivery. This imparts a shear force that degrades the mRNA cargo and therefore reduces cell transfection. In addition to remaining stable upon aerosolization, mRNA LNPs must also possess the aerodynamic properties to achieve deposition in clinically relevant areas of the lungs. We addressed these challenges by formulating mRNA LNPs with SM‐102, the clinically approved ionizable lipid in the Spikevax COVID‐19 vaccine. Our lead candidate, B‐1, had the highest mRNA expression in both a physiologically relevant air–liquid interface (ALI) human lung cell model and in healthy mice lungs upon aerosolization. Further, B‐1 showed selective transfection in vivo of lung epithelial cells compared to immune cells and endothelial cells. These results show that the formulation can target therapeutically relevant cells in pulmonary diseases such as cystic fibrosis. Morphological studies of B‐1 revealed differences in the surface structure compared to LNPs with lower transfection efficiency. Importantly, the formulation maintained critical aerodynamic properties in simulated human airways upon next generation impaction. Finally, structure–function analysis of SM‐102 revealed that small changes in the number of carbons can improve upon mRNA delivery in ALI human lung cells. Overall, our study expands the application of SM‐102 and its analogs to aerosolized pulmonary delivery and identifies a potent lead candidate for future therapeutically active mRNA therapies.

The purpose of this study was to prepare large hollow particles (LHPs) by spray drying for pulmonary delivery of cyclosporine A (CsA), using L-Leucine (LEU) and hydroxypropyl methylcellulose (HPMC) as excipients and ammonium bicarbonate (AB) as a porogen. The prepared LHPs were spherical particles composed of both CsA and LEU on the surface and HPMC on the inner layer. The formulation of CsA-LEU-0.8HPMC-AB as typical LHPs showed excellent in vitro aerodynamic performance with a minimum mass median aerodynamic diameter (MMAD) of 1.15 μm. The solubility of CsA-LEU-0.8HPMC-AB was about 5.5-fold higher than that of raw CsA, and the dissolution of CsA-LEU-0.8HPMC-AB suggested that the drug was released within 1 h. The cell viability of the A549 cell line showed that CsA-LEU-0.8HPMC-AB was safe for delivering CsA to the lungs. In addition, inhalation administration of CsA-LEU-0.8HPMC-AB with the Cmax and AUC0–∞ increasing by about 2-fold and 2.8-fold compared with the oral administration of Neoral® could achieve therapeutic drug concentrations with lower systemic exposure and significantly improve the in vivo bioavailability of CsA. From these findings, the LHPs, with the advantage of avoiding alveolar macrophage clearance, could be a viable choice for delivering CsA by inhalation administration relative to oral administration. [ABSTRACT FROM AUTHOR]

Acute lung injury (ALI) is a frequent and serious complication of sepsis with limited therapeutic options. Gaining insights into the inflammatory dysregulation that causes sepsis‐associated ALI can help develop new therapeutic strategies. Herein, the crucial role of cell‐free mitochondrial DNA (cf‐mtDNA) in the regulation of alveolar macrophage activation during sepsis‐associated ALI is identified. Most importantly, a biocompatible hybrid protein nanomotor (NM) composed of recombinant deoxyribonuclease I (DNase‐I) and human serum albumin (HSA) via glutaraldehyde‐mediated crosslinking is prepared to obtain an inhalable nanotherapeutic platform targeting pulmonary cf‐mtDNA clearance. The synthesized DNase‐I/HSA NMs are endowed with self‐propulsive capability and demonstrate superior performances in stability, DNA hydrolysis, and biosafety. Pulmonary delivery of DNase‐I/HSA NMs effectively eliminates cf‐mtDNAs in the lungs, and also improves sepsis survival by attenuating pulmonary inflammation and lung injury. Therefore, pulmonary cf‐mtDNA clearance strategy using DNase‐I/HSA NMs is considered to be an attractive approach for sepsis‐associated ALI. [ABSTRACT FROM AUTHOR]

Abstract Acute lung injury (ALI) is a frequent and serious complication of sepsis with limited therapeutic options. Gaining insights into the inflammatory dysregulation that causes sepsis‐associated ALI can help develop new therapeutic strategies. Herein, the crucial role of cell‐free mitochondrial DNA (cf‐mtDNA) in the regulation of alveolar macrophage activation during sepsis‐associated ALI is identified. Most importantly, a biocompatible hybrid protein nanomotor (NM) composed of recombinant deoxyribonuclease I (DNase‐I) and human serum albumin (HSA) via glutaraldehyde‐mediated crosslinking is prepared to obtain an inhalable nanotherapeutic platform targeting pulmonary cf‐mtDNA clearance. The synthesized DNase‐I/HSA NMs are endowed with self‐propulsive capability and demonstrate superior performances in stability, DNA hydrolysis, and biosafety. Pulmonary delivery of DNase‐I/HSA NMs effectively eliminates cf‐mtDNAs in the lungs, and also improves sepsis survival by attenuating pulmonary inflammation and lung injury. Therefore, pulmonary cf‐mtDNA clearance strategy using DNase‐I/HSA NMs is considered to be an attractive approach for sepsis‐associated ALI.

Nanomedicines based on nanoparticles rely both on the potency of the drug as well as the efficiency of the delivery system, for which particle size plays a crucial role. For the intracellular delivery of small interference RNA (siRNA), lipid-polymer nanoparticle (LPN) hybrid systems constitute a safe and highly effective class of delivery systems. In the present study, we employ a microfluidics method for the manufacturing of spherical siRNA-loaded LPNs for pulmonary delivery with distinct size distributions with average diameters of approximately 70, 110, and 220 nm. We designed an optically clear, inexpensive thiol-ene polymeric microfluidic chip prototype that is compatible with standard ‘soft-lithography’ techniques, allows for replica molding, and is resistant to harsh solvents. By using SPECT/CT in vivo imaging, we show comparable pulmonary clearance patterns of all three differently sized LPN formulations following intratracheal administration. Also, negligible accumulation in the liver was observed.

Inhaling drugs, on the other hand, is limited mainly by the natural mechanisms of the respiratory system, which push drug particles out of the lungs or make them inefficient once they are there. Because of this, many ways have been found to work around the problems with drug transport through the lungs. Researchers have made polymeric microparticles (MP) and nanoparticles as a possible way to get drugs into the lungs. They showed that the drug could be trapped in large amounts and retained in the lungs for a long time, with as little contact as possible with the bloodstream. MP were formulated in this study to get dexamethasone (DMC) into the pulmonary area. The Box-Behnken design optimized microspheres preparation to meet the pulmonary delivery prerequisites. Optimized formulation was figured out based on the desirability approach. The mass median aerodynamic diameter (MMAD) of the optimized formula (O-DMC-MP) was 8.46 ± 1.45 µm, and the fine particle fraction (FPF) was 77.69 ± 1.26%. This showed that it made suitable drug delivery system, which could make it possible for MP to settle deeply in the lung space after being breathed in. With the first burst of drug release, it was seen that drug release could last up to 16 h. Also, there was no clear sign that the optimized formulation was toxic to the alveoli basal epithelial cells in the lungs, as supported by cytotoxic studies in HUVEC, A549, and H1299 cell lines. Most importantly, loading DMC inside MP cuts the amount of drug into the bloodstream compared to plain DMC, as evident from biodistribution studies. Stability tests have shown that the product can stay the same over time at both the storage conditions. Using chitosan DMC-MP can be a better therapeutic formulation to treat acute respiratory distress syndrome (ARDS).

[Display omitted] • Liposomes and cubosomes show specific and discrete interaction behavior with macrophages and lung epithelial cells in presence of bronchoalveolar lavage fluid (BALF). • Label-free quantitative proteomics revealed differences in the protein corona formed on BALF treated liposomes versus cubosomes. • Albumin rich corona altered cellular uptake kinetics of liposomes, while Apolipoprotein H present on cubosomes enhanced their uptake. The inhalable administration of lipid nanoparticles is an effective strategy for localised delivery of therapeutics against various lung diseases. Of this, improved intracellular delivery of pharmaceuticals for infectious disease and cancer management is of high significance. However, the influence of lipid nanoparticle composition and structure on uptake in pulmonary cell lines, especially in the presence of biologically relevant media is poorly understood. Here, the uptake of lamellar (liposomes) versus non-lamellar (cubosomes) lipid nanoparticles in macrophages and lung epithelial cells was quantified and the influence of bronchoalveolar lavage fluid (BALF), containing native pulmonary protein and surfactant molecules is determined. Cubosome uptake in both macrophages and epithelial cells was strongly mediated by a high percentage of molecular function regulatory and binding proteins present within the protein corona. In contrast, the protein corona did not influence the uptake of liposomes in epithelial cells. In macrophages, the proteins mediated a rapid internalisation, followed by exocytosis of liposomes after 6 h incubation. These findings on the influence of biological fluid in regulating lipid nanoparticle uptake mechanisms may guide future development of optimal intracellular delivery systems for therapeutics via the pulmonary route. [ABSTRACT FROM AUTHOR]

Silicosis is a life‐threatening lung fibrotic disease caused by excessive inhalation of environmental exposure to crystalline silica‐containing dust, whereas achieving therapeutic cures are constrained. Antioxidation and anti‐inflammation are currently recognized as effective strategies to counteract organ fibrosis. Using naturally occurring phytomedicines quercetin (Qu) has emerged in antagonizing fibrotic disorders involving oxidative stress and inflammation, but unfortunately the hydrophilicity deficiency. Herein, chitosan‐assisted encapsulation of Qu in nanoparticles (Qu/CS‐NPs) was first fabricated for silicosis‐associated fibrosis treatment by pulmonary delivery. Qu/CS‐NPs with spherical diameters of ~160 nm, demonstrated a high Qu encapsulated capability, excellent hydrophilic stability, fantastic oxidation radical scavenging action, and outstanding controlled as well as slow release Qu action. A silicosis rat model induced by intratracheal instillation silica was established to estimate the anti‐fibrosis effect of Qu/CS‐NPs. After intratracheal administration, CS‐NPs markedly enhanced Qu anti‐fibrotic therapy efficacy, accompanying the evident changes in reducing ROS and MDA production to mitigate oxidative stress, inhibiting IL‐1β and TNF‐α release, improving lung histological architecture, down‐regulating α‐SAM levels and suppressing ECM deposition, and thereby ameliorating silica‐induced pulmonary fibrosis. Results manifested that the augmented antioxidant and anti‐inflammatory activities of Qu by CS‐NPs delivery was a result of achieving this remarkable improvement in curative effects. Combined with negligible systemic toxicity, nano‐decorated Qu may provide a feasible therapeutic option for silicosis therapy. [ABSTRACT FROM AUTHOR]