210 results on '"Puchi-Cabrera, E.S."'
Search Results
2. Effect of microstructure and temperature on the stress corrosion cracking of two microalloyed pipeline steels in H2S environment for gas transport
3. Physically-based constitutive description of a commercial Al-Mg-Si alloy deformed under cold-warm working conditions
4. Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation
5. Modeling the viscoplastic flow behavior of a 20MnCr5 steel grade deformed under hot-working conditions, employing a meshless technique
6. Incremental constitutive description of SAE 5120 steel deformed under hot-working conditions
7. Dynamic recrystallization behaviour of spheroidal graphite iron. Application to cutting operations
8. A novel approach for modeling the flow stress curves of austenite under transient deformation conditions
9. Mechanical characterization of a prototype a-C:Cr,Si and its tribological behavior at high temperature
10. Characterization of the hot-working behavior of a Cu-Ni-Si alloy
11. Some improvements for determining the hardness of homogeneous materials from the work-of-indentation
12. Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy
13. Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions
14. A description of the composite elastic modulus of multilayer coated systems
15. Tribological response of AA 2024-T3 aluminium alloy coated with a DLC duplex coating
16. Modeling the composite hardness of multilayer coated systems
17. A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film
18. An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization
19. Analysis of the work-hardening behavior of C–Mn steels deformed under hot-working conditions
20. An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques
21. Sliding wear of a-C:H coatings against alumina in corrosive media
22. Influence of tip defect and indenter shape on the mechanical properties determination by indentation of a TiB2–60%B4C ceramic composite
23. Cr2C3–NiCr VPS thermal spray coatings as candidate for chromium replacement
24. Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying
25. Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray
26. Plastic deformation of structural steels under hot-working conditions
27. Elastic modulus of TiHfCN thin films by instrumented indentation
28. Flow stress and ductility of AA7075-T6 aluminum alloy at low deformation temperatures
29. Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling
30. Mechanical properties of an Al 91–Mn 6–Nd 3 nanostructured alloy
31. Effect of spraying distance on the microstructure and mechanical properties of a Colmonoy 88 alloy deposited by HVOF thermal spraying
32. Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray
33. Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating
34. Effect of spray distance on the corrosion-fatigue behavior of a medium-carbon steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spray
35. Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray
36. Thin film hardness determination using indentation loading curve modelling
37. Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating
38. Mechanical properties of hard AlCrN-based coated substrates
39. Evaluation of microstructure and mechanical properties of nitrided steels
40. Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying
41. Corrosion behavior of Cr 3C 2–NiCr vacuum plasma sprayed coatings
42. Characterization and residual stresses of WC–Co thermally sprayed coatings
43. Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF
44. Fretting wear of HVOF Ni–Cr based alloy deposited on SAE 1045 steel
45. Microstructure and adhesion of Cr 3C 2–NiCr vacuum plasma sprayed coatings
46. Influence of the N 2 partial pressure on the mechanical properties and tribological behavior of zirconium nitride deposited by reactive magnetron sputtering
47. High cycle fatigue behavior of 316L stainless steel
48. Fatigue behavior of AA7075-T6 aluminum alloy coated with ZrN by PVD
49. An Internal State Variable Constitutive Description for the Deformation of Metals at Elevated Temperatures
50. High temperature wear resistance of (TiAl)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.