Search

Adsorption using biochar is a high-efficient method for removing dyes from wastewater, and it has become a hot research topic in recent years. Biochar produced from organic wastes through pyrolysis is a promising way to combine bioenergy recovery and dye removal. In this study, durian shell (DS) was used as a feedstock for biochar and bio-oil production under different pyrolysis temperatures (400, 500, and 600 °C) for bioenergy recovery. Then, the biochar was applied as the absorbent for methylene blue (MB) removal from wastewater under batch and continuous experiments. It was found that the bio-oil production was slightly affected by temperature, while the productivity of biochar decreased from 42.05% to 30.65% with the increase in pyrolysis temperature from 400 to 600 °C. Compared with the biochar produced at 500 °C (DS-500) and 600 °C (DS-600), the biochar obtained at 400 °C (DS-400) exhibited higher MB removal efficiency and adsorption capacity under various pH conditions due to the superior microstructure. A high pH condition was beneficial for the adsorption process with DS-400. Additionally, the MB removal efficiencies increased with the increase in biochar dosage by providing more activated sites. A high MB content can promote the adsorption process, but a too high MB content negatively affects the removal efficiency due to the sorption saturation. Adsorption processes are more likely to match a pseudo-second-order model by chemical reactions. In the long-term continuous experiment, MB can be effectively removed to match the discharge standard by DS-400. This study provided a sustainable pathway for organic waste disposal and dye wastewater treatment. [ABSTRACT FROM AUTHOR]

Microalgae cultivation using wastewater is a combined process for pollutant removal and lipid production that has been widely studied in recent years. In this study, the effects of anaerobic membrane effluent (AME) and municipal wastewater (MW) ratios on microalgae growth and pollutant removal processes were investigated, and the lipid production properties were also explored. Results show that microalgae can grow in all AME/WW ratios, and a 40% AME content is the optimal condition for microalgal biomass accumulation (52.9 mg/L·d) and lipid production (0.378 g/L). Higher AME addition would inhibit microalgae growth. In addition, high ammonia (approximately 97%) and phosphate (around 90%) removal efficiencies can be achieved in all AME/WW ratio conditions, while the total nitrogen removal efficiencies decreased with the addition of AME. Total nitrogen and phosphate are the limiting factors in treating water to meet the requirements of the integrated wastewater discharge standard. This study provided a new method for anaerobic digestion and municipal wastewater treatment and also realized green energy production based on the sustainable development principles. [ABSTRACT FROM AUTHOR]