Search

The paper presents a new kind of stationary phase for gas chromatography based on deep eutectic solvents (DES) in the form of a mixture of L-proline (protonated with hydrochloric acid) as a hydrogen bond acceptor (HBA) and xylitol as a hydrogen bond donor (HBD) in a molar ratio of HBA:HBD 5:1. DES immobilized on a silanized chromatographic support was tested by gas chromatography (GC) in order to determine its resolving power for volatile organic compounds. Studies have demonstrated the suitability of this type of DES as a stationary phase for GC. The Rohrschneider-McReynolds constants were determined for the synthesized DES, revealing that it is a polar stationary phase (Σ(ΔI) = 1717). The selectivity of DES is influenced by the presence of hydroxyl groups in the xylitol structure capable of forming hydrogen bonds of a donor nature and the proton acceptor properties of the protonated L-proline structure. The presence of additional interactions is brought about by the presence of the carboxyl group. As a result, the retention of alcohols is several times higher (200-670%) than the expected value based on their boiling points. A significant increase in retention (400-970%) was also found for pyridine derivatives. The developed DES stationary phase is characterized by very good repeatability of retention and stability (up to 140°C). The efficiency of the prepared columns (6300-11300 theoretical plates/m) and the selectivity of the DES stationary phase are competitive with the commercial products.

Changes in the properties of bitumen binders that occur as a result of aging have a huge impact on the durability of products produced from them. In particular, asphalt pavements, which constitute the most common use of petroleum bitumen, are susceptible to damage resulting from the increasing stiffness of the bitumen during its life cycle. Increased stiffness of asphalt pavements reduces the pavement resistance to low-temperature cracks and fatigue cracks, ultimately leading to the loss of their functional properties and the need for road repair. The rate of changes in bitumen properties is influenced by many factors, the most important of which are environmental conditions, technological parameters of binder processing, and physicochemical properties. The greatest impact on minimizing the adverse effect of aging is the use of bitumen suitably resistant to aging, and changing the technological parameters of its application. This article reviews the literature and standardized test methods of bitumen aging, with a focus on the methods that are most often used in practice, to evaluate the suitability of bitumen for use in road construction. The presented methods are limited to aging simulation. This mini-review presents the most important stages of aging procedures, their advantages and limitations, as identified by the authors of this publication for different types of bitumen. Moreover, the most important directions of developments in the field of new laboratory aging tests are highlighted. The suggestions are based on the industrial practice of the authors of this review, taking into account identified demands for quality control in the industry.

The paper presents novel nonionic and hydrophobic deep eutectic solvents which were synthesized from natural compounds, i.e., thymol, ±camphor, decanoic and 10-undecylenic acids. Fundamental physicochemical properties of the synthesized deep eutectic solvents were determined, followed by their application as extractants in ultrasound-assisted dispersive liquid-liquid microextraction to isolate and enrich polycyclic aromatic hydrocarbons from aqueous samples characterized by a complex matrix. The final determination was carried out by gas chromatography-mass spectrometry. The most important extraction parameters were optimized and the procedure was validated. The developed procedure is characterized by low limits of detection and quantitation, equal to 0.0039-0.0098 μg/L and 0.012-0.029 μg/L, respectively, good precision (RSD

Hydrogen applicability in the power, chemical and petrochemical industries is constantly growing. Efficient methods of hydrogen generation from renewable sources, including waste products, are currently being developed, even though hydrogen is mainly produced through steam reforming or thermal cracking of natural gas or petroleum fractions. In paper alternative methods of hydrogen production with a particular emphasis on dark fermentation are discussed. The review compiles essential information on strains of bacteria used in the production of hydrogen from waste products in the agroindustry and from lignocellulosic biomass. The effect of such parameters as kind of raw material, method of processing, temperature, pH, substrate concentration, partial pressure of hydrogen, hydraulic retention time, method of inoculum preparation and the type and operating parameters of a reactor on the yield of dark fermentation is discussed. The review aims at presentation of current state of knowledge on the dark fermentation process utilizing waste materials as substrates. The results of investigations with emphasis on the most important issues regarding operating parameters of dark fermentation are also included.

The use of acoustic cavitation in advanced oxidation processes (AOPs) is a promising trend in research for treatment of industrial effluents. The paper presents the results of investigations on the use of acoustic cavitation aided by additional oxidation processes (ozonation/H2O2 oxidation/Peroxone/UV-C) for the treatment of effluents from the production of bitumens. Under these conditions, the total contaminant load, expressed as chemical oxygen demand (COD), could be lowered by 51%. In addition, changes in concentrations of volatile organic compounds identified in the effluents following the treatment are discussed. The investigations revealed that by using acoustic cavitation combined with the Peroxone process, the majority of oxygenated organic compounds were oxidized. The paper also compares AOPs based on acoustic cavitation with hydrodynamic cavitation-aided processes. This study revealed that the use of acoustic cavitation results in a higher effectiveness of degradation of organic compounds using AOPs based on hydrogen peroxide. On the other hand, hydrodynamic cavitation is generally a slightly more effective method for degradation of organic compounds for ozone-based AOPs. Furthermore, furfural and 2-methylcyclohexanone were discovered as secondary pollutants whose concentration increased during the treatment.

Hydrodynamic and acoustic cavitation combined with advanced oxidation processes (AOPs), including, among others, the Fenton process, is a promising alternative to the technologies of wastewater treatment technologies in use today. The present review discusses processes based on cavitation combined with AOPs and evaluates their effectiveness in oxidation of organic contaminants. Complete degradation of, among others, p-nitrotoluene, p-aminophenol, 1,4-dioxane, alachlor, chloroform, trichloroethylene, sodium pentachlorophenate and carbon tetrachloride was achieved by using hydrodynamic cavitation or acoustic cavitation alone. Cavitation is also an effective method of disinfection of water. Complete oxidation of hardly degradable organic contaminants, including pharmaceuticals, organic dyes, insecticides, phenol and its derivatives was observed when using hybrid processes: hydrodynamic or acoustic cavitation combined with the Fenton process, ozonation, hydrogen peroxide, UV irradiation, catalysts and persulfates. The review also discusses the cavitational reactors used in the wastewater treatment and the effect of process parameters (including pH, temperature, concentration and kind of contaminants) on the effectiveness of oxidation. The oxidation effectiveness for individual treatment methods is compared and their advantages and limitations discussed. The analysis of economics of the treatment processes performed to evaluate the possibility of scaling up reveals that the only economical processes should be based on hydrodynamic cavitation (mainly due to low cost of reactors and low consumption of electrical energy compared with ultrasonic reactors).

The paper presents new types of deep eutectic solvents (DESs) based on L-proline protonated using three different acids (hydrochloric, sulfuric and phosphoric)and playing the role of a hydrogen bond acceptor(HBA). Glucose and xylitol were used as hydrogen bond donors (HBD). A series of deep eutectic solvents with various mole ratios were obtained for the systems L-proline: glucose and L-proline: xylitol. Density, melting point, pH and viscosity of the synthesized DESs were determined along with the effect of water content, mole fraction of the HBA in DES and temperature on properties of the DESs. A wide range of densities (1343–1606 kg/m3), viscosities at 20 °C (699.6–48,590 mPa·s) and pH of 0.1 M DES solutions (1.578–2.456) make the obtained deep eutectic solvents potentially applicable in numerous technological processes, extractions as well as in analytical techniques, including microextraction. Components of these DESs are of natural origin and non-toxic, thus environmentally friendly and suitable for food as well as pharmaceutical industry.

We present a new procedure for the determination of 32 volatile organonitrogen compounds in samples of industrial effluents with a complex matrix. The procedure, based on dispersive liquid-liquid microextraction followed by gas chromatography with nitrogen-phosphorus and mass spectrometric detection, was optimized and validated. Optimization of the extraction included the type of extraction and disperser solvent, disperser solvent volume, pH, salting out effect, extraction, and centrifugation time. The procedure based on nitrogen-phosphorus detection was found to be superior, having lower limits of detection (0.0067-2.29 μg/mL) and quantitation as well as a wider linear range. The developed procedure was applied to the determination of content of volatile organonitrogen compounds in samples of raw effluents from the production of bitumens in which 13 compounds were identified at concentrations ranging from 0.15 to 10.86 μg/mL and in samples of effluents treated by various chemical methods.