Search

This study focuses on optimizing the storage capacity of an underground natural gas storage facility through numerical modeling and simulation techniques. The reservoir, characterized by an elongated dome structure, was discretized into approximately 16,000 cells. Simulations were conducted using key parameters such as permeability (10–70 mD) and porosity (12–26%) to assess the dynamics of gas injection and pressure distribution. The model incorporated core and petrophysical data to accurately represent the reservoir's behavior. By integrating new wells in areas with storage deficits, the model demonstrated improvements in storage efficiency and pressure uniformity. The introduction of additional wells led to a significant increase in storage volume from 380 to 512 million Sm³ and optimized the injection process by reducing the storage period by 25%. The study concludes that reservoir performance can be enhanced with targeted well placement and customized flow rates, resulting in both increased storage capacity and economic benefits. [ABSTRACT FROM AUTHOR]

The paper presents a simulation-based approach for optimizing CO2 injection into depleted gas reservoirs, with the goal of enhancing underground CO2 storage. The research employs a two-dimensional dynamic reservoir model, developed using Darcy's law, to describe gas flow in a pressure-homogeneous porous medium, along with real gas equations. The model integrates the Du Fort–Frenkel and finite-difference methods to accurately simulate the behavior of CO2 during injection and storage. Real data from an operational gas storage facility were used to calibrate the model. CO2sim v1 software, specifically developed for this purpose, simulates CO2 injection cycles and quiescence phases, enabling the optimization of storage capacity and energy efficiency. The reservoir model, based on the engineering of the geological structure, is discretized into approximately 16,000 cells and solved using the finite-difference method, allowing for rapid simulation of CO2 injection and quiescence processes. The average computation time for a 150-day cycle is approximately 5 min. Simulation results indicate that increasing the number of injection wells and carefully controlling the injection rates significantly improves the distribution of CO2 within the reservoir, thereby enhancing storage efficiency. Additionally, appropriate well placement and prolonged quiescence periods lead to better CO2 dispersion, increasing the storage potential while reducing energy costs. The study concludes that further development of the software, along with comprehensive technical and economic assessments, is required to fully optimize CO2 storage on a commercial scale. [ABSTRACT FROM AUTHOR]

The article presents carbon capture and storage, CCS, as a climate change mitigation method. Many industrial processes, such as the manufacture of cement, the metallurgical industry, and the production of electricity from fossil fuels, produce large CO2 quantities. Carbon capture and storage is a method for these industrial areas to become carbon neutral for the environment. To combat climate change, the EU wants to achieve climate neutrality by 2050, and this goal, along with an intermediate goal of reducing emissions by 55% by 2030, is enshrined in the European Climate Law. The EU has launched various initiatives to achieve these goals, one of which is the 'Fit for 55' legislation. The first step that countries wanting to apply these technologies must take is the evaluation of the underground CO2 storage potential. The potential for CO2 storage in the depleted hydrocarbon reservoirs in Oltenia, one of the eight regions of Romania, makes it possible to develop safe long-term storage projects for the neighboring power plants currently producing energy from burning coal or hydrocarbons. The results of dynamic simulations of CO2 storage in one of these geological structures, Bradesti, which hosts depleted hydrocarbon reservoirs, using a numerical simulator are successfully presented for the neighboring Isalnita Power Plant. In this case, the impact on the environment and climate will be minimal and in alignment with the European Union's long-term objectives. Our study also opens the path for future similar analyses. [ABSTRACT FROM AUTHOR]

The reduction in GHG emissions has become one of the most important objectives in Europe. One of these clean technologies in the quest for large-scale decarbonisation is the blending of hydrogen and natural gas (H2NG). The significance of this article lies in conducting a technical–economic analysis that relies on simulating annual consumption patterns. This study focuses on the utilization of H2NG at different proportions within a distribution network in Bucharest, Romania's largest city. The paper is a fallow up of another paper and presents a case study for the injection through all four entry points in the city of different percentages of hydrogen and the dynamic of the mix through the gas distribution network. The study found that the variation in H2 in the network is high and depends on the entry point levels and consumption. An economic analysis was conducted on seasonal real consumption, which confirmed the investment's profitability. [ABSTRACT FROM AUTHOR]

Natural gases are a mixture of hydrocarbons which are generally in a gaseous state. Due to the variation in transport parameters (pressure, temperature) and gas composition, there may be sectors where those appear in liquid state, the condensate. The paper presents a system for managing the quantities of fluids from a network in which the liquid state appears. Based on a simulator that includes flash computation, a physical balance of the transport or gathering network can be made.

The paper presents a methodology for determining the conditions in which the liquid phase occurs in the transported natural gas. This methodology allows fast and accurate determination of the phase in which water can be found in natural gas transmission pipelines and also the possibility to highlight the points in the transmission system in which water is in liquid state. A complex function which can describe the phase behavior of water from natural gas has been defined by processing the phase envelopes of the wet natural gas in the field of the Romanian transmission system. [ABSTRACT FROM AUTHOR]

This paper presents a natural gas supply system of a locality. Since power consumption is nonstationary, for supplying the consumption peaks it is used a gas deposit kept in a pipeline built near the locality. The viability of this solution was demonstrated by simulation with the numerical simulator SIMONE. [ABSTRACT FROM AUTHOR]