Search

Plant proteinase inhibitors (PIs) are critical in defending against biotic stress. Most PIs contain an inhibitory repeat domain (IRD), which serves as the functional component, displaying a high degree of sequence and structural conservation. In this study, we examined the structural and functional resilience of IRDs using a combination of computational modeling and experimental validation. We have taken an evolution-based approach to enhance the PIs effectiveness of two previously identified Capsicum annuum IRDs, IRD4 and IRD10. Through in silico site-saturation mutagenesis of IRD4 and IRD10, we identified key sites associated with enhanced PI activity for targeted mutagenesis. Binding energy predictions for a mutant IRD library, tested against target proteases, suggested that positions R11 and N32 in IRD4 and N32 and H33 in IRD10 were promising candidates for further modification to improve inhibitory potential. Subsequent experimental validation revealed that the mutant proteins IRD4_R11K and IRD4_N32S exhibited stronger chymotrypsin inhibition than the wild-type (WT) IRD4. Similarly, the mutants IRD10_N32S and IRD10_H33 N demonstrated improved trypsin inhibition relative to the WT IRD10. These findings indicate that engineered IRD variants can tolerate structural changes while maintaining or enhancing their inhibitory activity against target proteases. Overall, this study demonstrates the potential of engineering PIs to increase their structural and functional resilience, offering new opportunities for biotechnological applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Electrocatalytic carbon dioxide (CO 2 ) reduction by CO 2 reductases is a promising approach for biomanufacturing. Among all known biological or chemical catalysts, hydrogen-dependent carbon dioxide reductase from Thermoanaerobacter kivui (TkHDCR) possesses the highest activity toward CO 2 reduction. Herein, we engineer TkHDCR to generate an electro-responsive carbon dioxide reductase considering the safety and convenience. To achieve this purpose, a recombinant Escherichia coli TkHDCR overexpression system is established. The formate dehydrogenase is obtained via subunit truncation and rational design, which enables direct electron transfer (DET)-type bioelectrocatalysis with a near-zero overpotential. By applying a constant voltage of -500 mV (vs. SHE) to a mediated electrolytic cell, 22.8 ± 1.6 mM formate is synthesized in 16 h with an average production rate of 7.1 ± 0.5 μmol h -1 cm -2 , a Faradaic efficiency of 98.9% and a half-cell energy efficiency of 94.4%. This study provides an enzyme candidate for high efficient CO 2 reduction and opens up a way to develop paradigm for CO 2 -based bio-manufacturing., Competing Interests: Competing interests The authors declare no competing interests., (© 2024. The Author(s).)

Transmembrane potassium ion channels are crucial for ion transport, metabolism, and signaling, and serve as promising targets for anti-cancer therapies. However, their hydrophobic transmembrane nature requires detergents, posing a major bottleneck for experimental handling. In this paper, we present a structural bioinformatics study of six experimentally determined and twelve modeled potassium channel structures, in which hydrophobic amino acids (L, I/V, and F) were systematically replaced with neutral hydrophilic ones (Q, T, and Y), making the proteins more water-soluble. QTY (computationally predicted) and native (experimental and repredicted) variants show remarkable structural similarity (RMSD: ~0.50 Å - ~2.14 Å) despite significant sequence differences. QTY variants, both rigid and refined with MD simulations, maintain comparable to native variants stability, solvent-accessible surface area (SASA), and ionic, aromatic, and van der Waals interactions but differ in the grand average of hydropathy (GRAVY), solubility, and hydrophobic contacts. Overall, our study presents a computational approach for designing hydrophilic potassium ion channels while maintaining the native global structure that could potentially simplify their practical use by eliminating the need for detergents., Competing Interests: Declarations Competing interests Massachusetts Institute of Technology (MIT) has filed several patent applications for the QTY code for GPCRs, and OH2Laboratories has obtained a license from MIT to develop water-soluble GPCR variants. However, this article does not focus on GPCRs. One of the authors, S.Z., is an inventor of the QTY code and holds a minor equity position in OH2Laboratories. S.Z. has also founded a startup called 511 Therapeutics, which aims to develop therapeutic monoclonal antibodies targeting solute carrier transporters for the treatment of pancreatic cancer. S.Z. holds a majority equity position in 511 Therapeutics. PT Metiska Farma partially sponsored the study but had no influence or interference in the study design, data collection, analysis, interpretation of data, manuscript writing, or decision to publish the results. All other authors declare no competing interests. Ethical approval It is a purely digital structural biology study utilizing publicly accessible in silico programs. We state that: i) all methods were conducted in compliance with applicable guidelines and regulations; ii) all experimental protocols received approval from an institutional and licensing committee; and iii) no human biological samples or human subjects were involved in this study., (© 2024. The Author(s).)

The success of AlphaFold in protein structure prediction highlights the power of data-driven approaches in scientific research. However, developing machine learning models to design and engineer proteins with desirable functions is hampered by limited access to high-quality data sets and experimental feedback. The Critical Assessment of Protein Engineering (CAPE) challenge addresses these issues through a student-focused competition, utilizing cloud computing and biofoundries to lower barriers to entry. CAPE serves as an open platform for community learning, where mutant data sets and design algorithms from past contestants help improve overall performance in subsequent rounds. Through two competition rounds, student participants collectively designed >1500 new mutant sequences, with the best-performing variants exhibiting catalytic activity up to 5-fold higher than the wild-type parent. We envision CAPE as a collaborative platform to engage young researchers and promote computational protein engineering.

Inspired by the properties of natural protein-based biomaterials, protein nanomaterials are increasingly designed with natural or engineered peptides or with protein building blocks. Few examples describe the design of functional protein-based materials for biotechnological applications that can be readily manufactured, are amenable to functionalization, and exhibit robust assembly properties for macroscale material formation. Here, we designed a protein-scaffolding system that self-assembles into robust, macroscale materials suitable for in vitro cell-free applications. By controlling the coexpression in Escherichia coli of self-assembling scaffold building blocks with and without modifications for covalent attachment of cross-linking cargo proteins, hybrid scaffolds with spatially organized conjugation sites are overproduced that can be readily isolated. Cargo proteins, including enzymes, are rapidly cross-linked onto scaffolds for the formation of functional materials. We show that these materials can be used for the in vitro operation of a coimmobilized two-enzyme reaction and that the protein material can be recovered and reused. We believe that this work will provide a versatile platform for the design and scalable production of functional materials with customizable properties and the robustness required for biotechnological applications.

Salicylate plays a pivotal role as a pharmaceutical intermediate in drugs, such as aspirin and lamivudine. The low catalytic efficiency of key enzymes and the inherent toxicity of salicylates to cells pose significant challenges to large-scale microbial production. In this study, we introduced the salicylate synthase Irp9 into an l-phenylalanine-producing Escherichia coli , constructing the shortest salicylate biosynthetic pathway. Subsequent protein engineering increased the catalytic efficiency of Irp9 by 33.5%. Furthermore, by integrating adaptive evolution with transcriptome analysis, we elucidated the crucial mechanism of efflux proteins in salicylate tolerance. The elucidation of this mechanism guided us in the targeted modification of these transport proteins, achieving a reported maximum level of 3.72 g/L of salicylate in a shake flask. This study highlights the importance of efflux proteins for enhancing the productivity of microbial cell factories in salicylate production, which also holds potential for application in the green synthesis of other phenolic acids.

Herein, we report macroscopic materials formed by the assembly of engineered bacterial spores. Spores were engineered by using a T7-driven expression system to display a high density of pH-responsive self-associating proteins on their surface. The engineered surface protein on the spore surface enabled pH-dependent binding at the protein level and enabled the assembly of granular materials. Mechanical properties remained largely constant with changing pH, but erosion stability was pH-dependent in a manner consistent with the pH-dependent interaction between the engineered surface proteins. Our finding utilizes synthetic biology for the design of macroscopic materials and illuminates the impact of coiled-coil interaction across various length scales.

The chemical and physical properties of proteins are limited by the 20 canonical amino acids. Genetic code manipulation allows for the incorporation of noncanonical amino acids (ncAAs) that enhance or alter protein functionality. This review explores advances in the three main strategies for introducing ncAAs into biosynthesized proteins, focusing on the role of high throughput screening in these advancements. The first section discusses engineering aminoacyl-tRNA synthetases (aaRSs) and tRNAs, emphasizing how novel selection methods improve characteristics including ncAA incorporation efficiency and selectivity. The second section examines high-throughput techniques for improving protein translation machinery, enabling accommodation of alternative genetic codes. This includes opportunities to enhance ncAA incorporation through engineering cellular components unrelated to translation. The final section highlights various discovery platforms for high-throughput screening of ncAA-containing proteins, showcasing innovative binding ligands and enzymes that are challenging to create with only canonical amino acids. These advances have led to promising drug leads and biocatalysts. Overall, the ability to discover unexpected functionalities through high-throughput methods significantly influences ncAA incorporation and its applications. Future innovations in experimental techniques, along with advancements in computational protein design and machine learning, are poised to further elevate this field.

N 6-Methyladenine (m6A) RNA methylation plays a key role in RNA processing and translational regulation, influencing both normal physiological and pathological processes. Yet, current techniques for studying RNA methylation struggle to isolate the effects of individual m6A modifications. Engineering of RNA methyltransferases (RNA MTases) could enable development of improved synthetic biology tools to manipulate RNA methylation, but it is challenging due to limited understanding of structure-function relationships in RNA MTases. Herein, using ancestral sequence reconstruction, we explore the sequence space of the bacterial DNA methyltransferase EcoGII (M.EcoGII), a promising target for protein engineering due to its lack of sequence specificity and its residual activity on RNA. We thereby created an efficient non-specific RNA MTase termed SUPer RNA EcoGII Methyltransferase (SUPREM), which exhibits 8-fold higher expression levels, 7°C higher thermostability and 12-fold greater m6A RNA methylation activity compared with M.EcoGII. Immunofluorescent staining and quantitative liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis confirmed SUPREM's higher RNA methylation activity compared with M.EcoGII in mammalian cells. Additionally, Nanopore direct RNA sequencing highlighted that SUPREM is capable of methylating a larger number of RNA methylation sites than M.EcoGII. Through phylogenetic and mutational analysis, we identified a critical residue for the enhanced RNA methylation activity of SUPREM. Collectively, our findings indicate that SUPREM holds promise as a versatile tool for in vivo RNA methylation and labeling., (© The Author(s) 2024. Published by Oxford University Press on behalf of Nucleic Acids Research.)

Specificity of a T cell receptor (TCR) is determined by the combination of its interactions to the peptide and human leukocyte antigen (HLA). TCR-based therapeutic molecules have to date targeted a single peptide in the context of a single HLA allele. Some peptides are presented on multiple HLA alleles, and by engineering TCRs for specific recognition of more than one allele, there is potential to expand the targetable patient population. Here, as a proof of concept, we studied two TCRs, S2 and S8, binding to the PRAME peptide antigen (ELFSYLIEK) presented by HLA alleles HLA-A*03:01 and HLA-A*11:01. By structure-guided affinity maturation targeting a specific residue on the HLA surface, we show that the affinity of the TCR can be modulated for different alleles. Using a combination of affinity maturation and functional T cell assay, we demonstrate that an engineered TCR can target the same peptide on two different HLA alleles with similar affinity and potency. This work highlights the importance of engineering alloselectivity for designing TCR based therapeutics suitable for differing global populations., (© 2024. The Author(s).)

Activity-regulated cytoskeleton-associated protein (Arc) forms virus-like capsids for mRNA transport between neurons. Unlike HIV-1 Group-specific Antigen (Gag), which uses its Nucleocapsid (NC) domain to bind HIV-1 genomic mRNA, mammalian Arc lacks the NC domain, and their direct mRNA binding interactions remain underexplored. This study examined rat Arc's binding to rat Arc 5' UTR (A5U), HIV-1 5' UTR (H5U), and GFP mRNAs, revealing weak binding with no significant preference. Adding the HIV-1 NC domain to rArc's C-terminus significantly improved binding to H5U, while also showing substantial binding to A5U at about 60% of its H5U level and exhibiting twice the affinity for A5U over GFP mRNA. Importantly, rArc-NC binds 3.4 times more A5U and H5U than GST-NC, indicating that rArc NTD-CA aids mRNA binding by HIV-1 NC. These findings suggest a conserved Gag protein-mRNA interaction mechanism, highlighting the potential for developing mRNA delivery systems that combine endogenous Gag NTD-CA with retroviral NC and UTRs.

Vaccine development targeting rapidly evolving pathogens such as HIV-1 requires induction of broadly neutralizing antibodies (bnAbs) with conserved paratopes and mutations, and in some cases, the same Ig-heavy chains. The current trial-and-error search for immunogen modifications that improve selection for specific bnAb mutations is imprecise. Here, to precisely engineer bnAb boosting immunogens, we use molecular dynamics simulations to examine encounter states that form when antibodies collide with the HIV-1 Envelope (Env). By mapping how bnAbs use encounter states to find their bound states, we identify Env mutations predicted to select for specific antibody mutations in two HIV-1 bnAb B cell lineages. The Env mutations encode antibody affinity gains and select for desired antibody mutations in vivo. These results demonstrate proof-of-concept that Env immunogens can be designed to directly select for specific antibody mutations at residue-level precision by vaccination, thus demonstrating the feasibility of sequential bnAb-inducing HIV-1 vaccine design., (© 2024. The Author(s).)

Effective delivery of engineered proteins into mitochondria is of great significance for developing efficient mitochondrial DNA editing tools and realizing accurate treatment of mitochondrial diseases. Here, the candidate genes, eGFP and Cas9 , were engineered with different mitochondrial localization signal (MLS) sequences introduced at their up- or/and down-streams. The corresponding expression vectors for the engineered proteins were constructed respectively, and HEK293T cells were transfected with these vectors. The fluorescence colocalization and Western blotting assays were used to analyze the mitochondrial targeting presentation effect of different engineered proteins. The results demonstrated that the daul-MLS modification of the eGFP and Cas9 proteins significantly improved the efficiency of mitochondrial targeted presentation, compared with the engineered proteins with single MLS added. Hence, it is speculated that dual MLS strategy can enhance the mitochondrial targeting of engineered proteins, which lays a theoretical foundation for the future development of efficient mitochondrial DNA editing tools.

The nonribosomal peptide synthetase (NRPS) is a highly precise molecular assembly machinery for synthesizing structurally diverse peptides, which have broad medicinal applications. Withinthe NRPS, the condensation (C) domain is a core catalytic domain responsible for the formation of amide bonds between individual monomer residues during peptide elongation. This review summarizes various aspects of the C domain, including its structural characteristics, catalytic mechanisms, substrate specificity, substrate gating function, and auxiliary functions. Moreover, through case analyses of the NRPS engineering targeting the C domains, the vast potential of the C domain in the combinatorial biosynthesis of peptide natural product derivatives is demonstrated.

Murideoxycholic acid (MDCA), as a significant secondary bile acid derived from the metabolism of α/β-muricholic acid in rodents, is an important component in maintaining the bile acid homeostasis. However, the biosynthesis of MDCA remains a challenging task. Here, we present the development of cytochrome P450 monooxygenase CYP102A1 (P450 BM3) from Bacillus megaterium, employing semi-rational protein engineering technique. Following three rounds of mutagenesis, a triple variant (T260G/G328A/L82V) has been discovered that proficiently catalyzes the 6β-hydroxylation of lithocholic acid (LCA), thereby generating MDCA with an impressive 8.5-fold increase in yield compared to the template P450 BM3 mutant. The MDCA selectivity has been also promoted from 62.0% to 96.3%. This biocatalyst introduces a novel approach for the biosynthesis of MDCA from LCA. Furthermore, molecular docking and dynamics simulations have been employed to unravel the molecular mechanisms underlying the enhanced LCA conversion and MDCA selectivity., (© 2024 Wiley‐VCH GmbH.)

Extracellular vesicles (EVs) had been described as a next-generation drug delivery system, due to the compelling evidence that they can facilitate the transfer of a variety of biomolecules between cells. The most frequently used strategy for loading protein cargoes is the endogenous engineering of EVs through genetic fusion of the protein of interest (POI) and scaffold proteins with high EV-sorting ability. However, the lack of scaffold proteins had become a major issue hindering the promotion of this technology. Herein, we proposed novel screening criteria that relax the inclusion requirement of candidate scaffold proteins and eventually identified a new scaffold protein, PLXNA1. The truncated PLXNA1 not only inherits the high EV-sorting ability of its full-length counterpart but also allows the fusion expression of POI in both outer surface and luminal areas, individually or simultaneously. In conclusion, our screening criteria expanded the range of potential scaffold proteins. The identified scaffold protein PLXNA1 showed great potential in developing therapeutic EVs., (© 2024 Echo Biotech Co Ltd. Journal of Extracellular Vesicles published by Wiley Periodicals LLC on behalf of International Society for Extracellular Vesicles.)

l-Asparaginases catalyze the hydrolysis of l-asparagine to l-aspartic acid and ammonia. These enzymes have potential applications in therapeutics and food industry. Tk1656, a highly active and thermostable l-asparaginase from Thermococcus kodakarensis, has been proved effective in selective killing of acute lymphocytic leukemia cells and in reducing acrylamide formation in baked and fried foods. However, it displayed <5 % activity under physiological conditions compared to the optimal activity at 85 °C and pH 9.5. We have attempted engineering of this valuable enzyme to improve the characteristics required for therapeutic and industrial applications. Based on the literature and crystal structure of Tk1656, nine specific mutant variants were designed, produced in Escherichia coli, and the purified mutant enzymes were compared with the wild-type. One of the mutants, K299L, displayed >20 % increase in activity at 85 °C. H158S substitution resulted in >5 °C increase in the optimal temperature. Similarly, a mesophilic-like mutation L56D, resulted in >5-fold increase in activity at pH 7.0 and 37 °C compared to that of the wild-type enzyme. The substrate specificity of the mutant variants remained unchanged. These results demonstrate that L56D and K299L variants of Tk1656 are the potent enzymes for therapeutics and acrylamide mitigation applications, respectively., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Extradiol dioxygenase Tcu3516 is a home-sourced enzyme demonstrating potent aromatic phenol degradation capacity. To add to the advantageous modifications inside active cavity, this work reported a novel strategy to engineer rarely concerned non-regular structures around the entrance towards the active site at the bottom of cavity. Three structures, Loop region 1 (Loop1: Met173-Arg185), Loop region 2 (Loop2: Ala201-Val212) and C-terminal (C-tail: His290-Lys306) were therefore identified through structural flexibility analysis. Highly rigid prolines within the structures were mutated into smaller alanine, glycine, or serine to improve structural flexibilities; while only P183S on Loop1 showed 3-fold activity enhancement vs the WT when subjected to cleavage of mono-cyclic catechol analogues. The analysis of Root Mean Square Fluctuation showed that P183S presents certain enhancement on Loop1 flexibility without dramatic changes of other domains. Furthermore, the synergetic effects from mutation P183S and cavity-based mutations V186L, V212N and D285A were evaluated by characterizing combinatorial mutants. Temperature dependence and thermostability of the combined mutants showed a more flexible catalytic domain without sacrificing structural integrity and stability. k cat value of P183S/V186L (SL) towards monocyclic catechols significantly surpasses any other combinatorial mutants around Tcu3516 active sites. Moreover, the synergetic effects on conformational plasticity were analyzed by molecular dynamic simulations to shed light into the interplay between structural changes and catalytic performance., Competing Interests: Declaration of competing interest All authors declare no competing financial interest., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Substantial reduction of the intact proviral reservoir is essential towards HIV-1 cure. In vivo administration of broadly neutralizing antibodies (bNAbs) targeting the HIV-1 envelope glycoprotein (Env) trimer can decrease the viral reservoir, through Fc-mediated killing of infected cells. In this study, we compared three commonly used antibody engineering strategies to enhance Fc-mediated effector functions: (i) glyco-engineering, (ii) protein engineering, and (iii) subclass/hinge modifications in a panel of anti-HIV-1 antibodies. We found that antibody-dependent cellular phagocytosis (ADCP) was improved by elongating the hinge domain and switching to an IgG3 constant domain. In addition, potent NK cell activation and ADCC activity was observed for afucosylated antibodies and antibodies bearing the GASDALIE mutations. The combination of these engineering strategies further increased NK cell activation and induced antibody dependent cytotoxicity (ADCC) of infected cells at low antibody concentrations. The bNAb N6 was most effective at killing HIV-1 infected cells, likely due to its high affinity and optimal angle of approach. Overall, the findings of this study are applicable to other antibody formats, and can aid the development of effective immunotherapies and antibody-based treatments for HIV-1 cure strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Lacto-N-neotetraose (LNnT), a representative oligosaccharide found in human milk, has been previously examined for its beneficial traits. However, the LNnT titer is limited by the efficient glycosyltransferase pathway, particularly with respect to the catalysis of rate-limiting steps. As data on the crystal structure of the key enzyme required for synthesizing LNnT are lacking, the synthesis of LNnT remains an uncertainty. Here, for the first time we report the three-dimensional structure of a bacterial β-1,4-galactosyltransferase, Aaβ4GalT, and analyze the critical role played by residues in its catalytic efficacy. Guided by structural insights, we engineered this enzyme to enhance its catalytic efficiency using structure-guided tunnel engineering. The mutant enzyme L5 (K155M/H156D/F157W/K185M/Q216V) so produced, showed a 50-fold enhancement in catalytic activity. Crystal structure analysis revealed that the mechanism underlying the improvement in activity was of the swing door type. The closed conformation formed by dense hydrophobic packing with Q216V-K155M widened and permitted substrate entry. Our results show that altering the tunnel conformation helped appropriately accommodate the substrate for catalysis and provide a structural basis for the modification of other glycosyltransferases., Competing Interests: Declaration of competing interest The authors declare that there are no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The vastness of unexplored protein fold universe remains a significant question. Through systematic de novo design of proteins with novel αβ-folds, we demonstrated that nature has only explored a tiny portion of the possible folds. Numerous possible protein folds are still untouched by nature. This review outlines this study and discusses the prospects for design of functional proteins with novel folds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The biochemical and biophysical properties of the extracellular matrix (ECM) play a pivotal role in regulating cellular behaviors such as proliferation, migration, and differentiation. Engineered protein-based hydrogels, with highly tunable multifunctional properties, have the potential to replicate key features of the native ECM. Formed by self-assembly or crosslinking, engineered protein-based hydrogels can induce a range of cell behaviors through bioactive and functional domains incorporated into the polymer backbone. Using recombinant techniques, the amino acid sequence of the protein backbone can be designed with precise control over the chain-length, folded structure, and cell-interaction sites. In this review, the modular design of engineered protein-based hydrogels from both a molecular- and network-level perspective are discussed, and summarize recent progress and case studies to highlight the diverse strategies used to construct biomimetic scaffolds. This review focuses on amino acid sequences that form structural blocks, bioactive blocks, and stimuli-responsive blocks designed into the protein backbone for highly precise and tunable control of scaffold properties. Both physical and chemical methods to stabilize dynamic protein networks with defined structure and bioactivity for cell culture applications are discussed. Finally, a discussion of future directions of engineered protein-based hydrogels as biomimetic cellular scaffolds is concluded., (© 2024 Wiley‐VCH GmbH.)

N-acetyl-D-glucosamine and its dimer are degradation products of chitin waste with great potential in therapeutic and agricultural applications. However, the hydrolysis of insoluble chitin by chitinases remains a major bottleneck. This study investigated the biochemical properties and catalytic mechanisms of PoChi chitinase obtained from Penicillium oxalicum with a focus on enhancing its efficiency during the degradation of insoluble chitin. Recombinant plasmids were engineered to incorporate chitin-binding (ChBD) and/or fibronectin III (FnIII) domains. Notably, PoChi-FnIII-ChBD exhibited the highest substrate affinity (K m  = 2.7 mg/mL) and a specific activity of 15.4 U/mg, which surpasses those of previously reported chitinases. These findings highlight the potential of engineered chitinases in advancing industrial biotechnology applications and offer a promising approach to more sustainable chitin waste management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Xylanase plays the most important role in catalyzing xylan to xylose moieties. GH11 xylanases have been widely used in many fields, but most GH11 xylanases are mesophilic enzymes. To improve the catalytic activity and thermostability of Aspergillus niger xylanase (Xyn-WT), we predicted potential key mutation sites of Xyn-WT through multiple computer-aided enzyme engineering strategies. We introduce a simple and economical Ni affinity chromatography purification method to obtain high-purity xylanase and its mutants. Ten mutants (Xyn-A, Xyn-B, Xyn-C, E45T, Q93R, E45T/Q93R, A161P, Xyn-D, Xyn-E, Xyn-F) were identified. Among the ten mutants, four (Xyn-A, Xyn-C, A161P, Xyn-F) presented improved thermal stability and activity, with Xyn-F(A161P/E45T/Q93R) being the most thermally stable and active. Compared with Xyn-WT, after heat treatment at 55 °C and 60 °C for 10 min, the remaining enzyme activity of Xyn-F was 12 and 6 times greater than that of Xyn-WT, respectively, and Xyn-F was approximately 1.5 times greater than Xyn-WT when not heat treated. The pH adaptation of Xyn-F was also significantly enhanced. In summary, an improved catalytic activity and thermostability of the design variant Xyn-F has been reported., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Catechol 1,2 dioxygenase is a versatile enzyme with several potential applications. However, due to its low thermostability, its industrial potential is not being met. In this study, the thermostability of a mesophilic catechol 1,2 dioxygenase from the species Rhodococcus opacus was enhanced via the introduction of disulphide bonds into its structure. Engineered designs (56) were obtained using computational prediction applications, with a set of hypothesized selection criteria narrowing the list to 9. Following recombinant production and purification, several of the designs demonstrated substantially improved protein thermostability. Notably, variant K96C-D278C yielded improvements including a 4.6°C increase in T 50 , a 725% increase in half-life, a 5.5°C increase in T m , and a >10-fold increase in total turnover number compared to wild type. Stacking of best designs was not productive. Overall, current state-of-the-art prediction algorithms were effective for design of disulfide-thermostabilized catechol 1,2 dioxygenase., (© 2024 National Research Council Canada and The Authors. Biotechnology and Bioengineering by Wiley Periodicals LLC. Reproduced with the permission of the Minister of Innovation, Science, and Economic Development.)

New-to-Nature biocatalysis has emerged as a promising tool in organic synthesis thanks to progress in protein engineering. Notably, hemeproteins have been evolved into robust catalysts for carbene and nitrene transfers and related sigmatropic rearrangements. In this work, we report the first example of a [2,3]-sigmatropic Sommelet-Hauser rearrangement initiated by a carbene transfer of the sperm whale myoglobin mutant L29S,H64V,V68F that was previously reported to catalyze the mechanistically similar [2,3]-sigmatropic Doyle-Kirmse rearrangement. This repurposed heme enzyme catalyzes the Sommelet-Hauser rearrangement between ethyl diazoacetate and benzyl thioethers bearing strong electron-withdrawing substituents with good yields and enantiomeric excess. Optimized catalytic conditions in the absence of any reductant led to an increased asymmetric induction with up to 59% enantiomeric excess. This myoglobin mutant is therefore one of the few catalysts for the asymmetric Sommelet-Hauser rearrangement. This work broadens the scope of abiological reactions catalyzed by iron-carbene transferases with a new example of asymmetric sigmatropic rearrangement., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Microbial cell surface display technology, which relies on genetically fusing heterologous target proteins to the cell wall through fusion with cell wall anchor proteins, has emerged as a promising and powerful method with diverse applications in biotechnology and biomedicine. Compared to classical intracellular or extracellular expression (secretion) systems, the cell surface display strategy stands out by eliminating the necessity for enzyme purification, overcoming substrate transport limitations, and demonstrating enhanced activity, stability, and selectivity. Unlike phage or bacterial surface display, the yeast surface display (YSD) system offers distinct advantages, including its large cell size, ease of culture and genetic manipulation, the use of generally regarded as safe (GRAS) host cell, the ability to ensure correct folding of complex eukaryotic proteins, and the potential for post-translational modifications. To date, YSD systems have found widespread applications in protein engineering, waste biorefineries, bioremediation, and the production of biocatalysts and biosensors. This review focuses on detailing various strategies and mechanisms for constructing YSD systems, providing a comprehensive overview of both fundamental principles and practical applications. Finally, the review outlines future perspectives for developing novel forms of YSD systems and explores potential applications in diverse fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Affibody molecules are small, robust, and versatile affinity proteins currently being explored for therapeutic, diagnostic, and biotechnological applications. Surface-exposed residues on the affibody scaffold are randomized to create large affibody libraries from which novel binding specificities to virtually any protein target can be generated using combinatorial protein engineering. Affibody molecules have the potential to complement-or even surpass-current antibody-based technologies, exhibiting multiple desirable properties, such as high stability, affinity, and specificity, efficient tissue penetration, and straightforward modular extension of functional domains. It has been shown in both preclinical and clinical studies that affibody molecules are safe, efficacious, and valuable alternatives to antibodies for specific targeting in the context of in vivo diagnostics and therapy. Here, we provide a general background of affibody molecules, give examples of reported applications, and briefly summarize the methodology for affibody generation., (© 2024 Cold Spring Harbor Laboratory Press.)

The development of artificial cells has led to fundamental insights into the functional processes of living cells while simultaneously paving the way for transformative applications in biotechnology and medicine. A common method of generating artificial cells is to encapsulate protein expression systems within lipid vesicles. However, to communicate with the external environment, protein translocation across lipid membranes must take place. In living cells, protein transport across membranes is achieved with the aid of complex translocase systems which are difficult to reconstitute into artificial cells. Thus, there is need for simple mechanisms by which proteins can be encoded and expressed inside synthetic compartments yet still be externally displayed. Here we present a genetically encodable membrane functionalization system based on mutants of pore-forming proteins. We modify the membrane translocating loop of α-hemolysin to translocate functional peptides up to 52 amino acids across lipid membranes. Full membrane translocation occurs in the absence of any translocase machinery and the translocated peptides are recognized by specific peptide-binding ligands on the opposing membrane side. Engineered hemolysins can be used for genetically programming artificial cells to display interacting peptide pairs, enabling their assembly into artificial tissue-like structures., (© 2024. The Author(s).)

(R)-selective transaminases have the potential to act as efficient biocatalysts for the synthesis of important pharmaceutical intermediates. However, their low catalytic efficiency and unfavorable equilibrium limit their industrial application. Seven (R)-selective transaminases were identified using homologous sequence mining. Beginning with the optimal candidate from Mycolicibacterium hippocampi, virtual mutagenesis and substrate tunnel engineering were performed to improve catalytic efficiency. The obtained variant, T282S/Q137E, exhibited 3.68-fold greater catalytic efficiency (k cat /K m ) than the wild-type enzyme. Using substrate fed-batch and air sweeping processes, effective conversion of 100 mM 4-hydroxy-2-butanone was achieved with a conversion rate of 93 % and an ee value > 99.9 %. This study provides a basis for mutation of (R)-selective transaminases and offers an efficient biocatalytic process for the asymmetric synthesis of (R)-3-aminobutanol., Competing Interests: Declaration of competing interest All authors disclosed no relevant relationships., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Engineering proteins with desired functions and biochemical properties is pivotal for biotechnology and drug discovery. While computational methods based on evolutionary information are reducing the experimental burden by designing targeted libraries of functional variants, they still have a low success rate when the desired protein has few or very remote homologous sequences. Here we propose an autoregressive model, called Temporal Dirichlet Variational Autoencoder (TDVAE), which exploits the mathematical properties of the Dirichlet distribution and temporal convolution to efficiently learn high-order information from a functionally related, possibly remotely similar, set of sequences. TDVAE is highly accurate in predicting the effects of amino acid mutations, while being significantly 90% smaller than the other state-of-the-art models. We then use TDVAE to design variants of the human alpha galactosidase enzymes as potential treatment for Fabry disease. Our model builds a library of diverse variants which retain sequence, biochemical and structural properties of the wildtype protein, suggesting they could be suitable for enzyme replacement therapy. Taken together, our results show the importance of accurate sequence modelling and the potential of autoregressive models as protein engineering and analysis tools., (© 2024. The Author(s).)

Chimeric antigen receptor T cell therapies have achieved great success in eradicating some liquid tumors, whereas the preclinical results in treating solid tumors have proven less decisive. One of the principal challenges in solid tumor treatment is the physical barrier composed of a dense extracellular matrix, which prevents immune cells from penetrating the tissue to attack intratumoral cancer cells. Here, we improve immune cell infiltration into solid tumors by manipulating septin-7 functions in cells. Using protein allosteric design, we reprogram the three-dimensional structure of septin-7 and insert a blue light-responsive light-oxygen-voltage-sensing domain 2 (LOV2), creating a light-controllable septin-7-LOV2 hybrid protein. Blue light inhibits septin-7 function in live cells, inducing extended cell protrusions and cell polarization, enhancing cell transmigration efficiency through confining spaces. We genetically edited human natural killer cell line (NK92) and mouse primary CD8 + T-cells expressing the engineered protein, and we demonstrated improved penetration and cytotoxicity against various tumor spheroid models. Our proposed strategy to enhance immune cell infiltration is compatible with other methodologies and therefore, could be used in combination to further improve cell-based immunotherapies against solid tumors., Competing Interests: Competing interests statement:Ontogenetically engineered septin-7 protein has been applied for a patent.

As a potent and convenient genome-editing tool, Cas9 has been widely used in biomedical research and evaluated in treating human diseases. Numerous engineered variants of Cas9, dCas9 and other related prokaryotic endonucleases have been identified. However, as these bacterial enzymes are not naturally present in mammalian cells, whether and how bacterial Cas9 proteins are recognized and regulated by mammalian hosts remain poorly understood. Here, we identify Keap1 as a mammalian endogenous E3 ligase that targets Cas9/dCas9/Fanzor for ubiquitination and degradation in an 'ETGE'-like degron-dependent manner. Cas9-'ETGE'-like degron mutants evading Keap1 recognition display enhanced gene editing ability in cells. dCas9-'ETGE'-like degron mutants exert extended protein half-life and protein retention on chromatin, leading to improved CRISPRa and CRISPRi efficacy. Moreover, Cas9 binding to Keap1 also impairs Keap1 function by competing with Keap1 substrates or binding partners for Keap1 binding, while engineered Cas9 mutants show less perturbation of Keap1 biology. Thus, our study reveals a mammalian specific Cas9 regulation and provides new Cas9 designs not only with enhanced gene regulatory capacity but also with minimal effects on disrupting endogenous Keap1 signaling., (© The Author(s) 2024. Published by Oxford University Press on behalf of Nucleic Acids Research.)

Initial studies on the immunogenicity of SARS-CoV-2 (CoV-2) S glycoprotein ("spike") as a protein subunit vaccine suggested sub-optimal efficacy in mammals. Although protein engineering efforts have produced CoV-2 spike protein sequences with greatly improved immunogenicity, additional strategies for improving the immunogenicity of CoV-2 protein subunit vaccines are scaffolding and the use of adjuvants. Comparisons of the effectiveness of engineered protein-only and engineered protein-nanoparticles vaccines have been rare. To explore this knowledge gap, we inoculated mice with two doses of either sequence-optimized trimeric spike protein or one of several sequence-optimized spike nanoparticles. We measured their immune response up to two months after the first dose. We also measured the immune response and protection against live virus in hamsters inoculated with either sequence-optimized trimeric spike protein or a liposome-based sequence-optimized spike nanoparticle. We found that in the presence of adjuvant, the antibody and neutralization titers elicited by spike-nanoparticles were not significantly greater than those elicited by spike-only in mice, even at doses as low as 0.1 µg/animal. Hamsters vaccinated with spike-only or spike-nanoparticles were equally protected from live virus one month after their first inoculation. These results suggest that sequence-optimized protein subunit vaccines in the form of individual prefusion-stabilized trimers can be as effective in improving immunogenicity as scaffolded forms., (© 2024. The Author(s).)

Protein engineering with non-canonical amino acids (ncAAs) holds great promises for diverse applications, however, there are still limitations in the implementation of this technology at manufacturing scale. The know-how to efficiently produce ncAA-incorporated proteins in a scalable manner is still very limited. In the present study, we incorporated the ncAA N 6 -[(2-azidoethoxy)carbonyl]-L-lysine (Azk) into an antigen binding fragment (Fab) in Escherichia coli. We used the orthogonal pyrrolysyl-tRNA synthetase/suppressor tRNA CUA Pyl pair from Methanosarcina mazei to incorporate Azk site-specifically. We characterized Azk uptake and Fab production at bench-scale under different fermentation conditions, varying timing and mode of Azk addition, Azk-to-cell ratio and induction time. Our results indicate that Azk uptake is comparatively efficient in the batch phase. We discovered that the time between Azk uptake and inducing its incorporation into the Fab must be kept short, which suggests that intracellular Azk is consumed and/or degraded. The results obtained in this study are an important step towards the development of efficient production methods for Azk-incorporated proteins in E. coli. The developed process is scalable and provides excellent yields of 2.95 mg functionalized Fab per g CDM, which corresponds to 80% of yield obtained with the wild type Fab. We also identified the cellular uptake of Azk being dependent on the physiological state of the cell as a potential bottleneck in production., (© 2024. The Author(s).)

Enzymes with high catalytic activity and stability are essential for industrial production, yet most natural enzymes do not meet these requirements. Therefore, efficient strategies for enzyme engineering are crucial. In this study, we developed a cost-effective computational design strategy to enhance the activity of tyrosine phenol-lyase (TPL) for the production of L-DOPA. By integrating structural analysis with computational design, and guided by our understanding of conformational flexibility of TPL, we identified a region where enhanced stability is most likely to facilitate enzyme activity. We screened stabilizing mutations by Cartesian&#95;ddg in Rosetta. After identifying single stabilizing mutations, we grouped the nearby positions harboring multiple stabilizing mutations and calculated the energy of combinatorial variants. We found two promising groups where most variants exhibited lower calculated energy than the wild-type. Experimental validation showed five variants in these groups exhibit increased activity, with the two best variants showing catalytic activity enhancements of 1.8-fold and 1.6-fold compared to the wild-type enzyme., (© 2024. The Author(s).)

Machine learning (ML)-based design approaches have advanced the field of de novo protein design, with diffusion-based generative methods increasingly dominating protein design pipelines. Here, we report a "hallucination"-based protein design approach that functions in relaxed sequence space, enabling the efficient design of high-quality protein backbones over multiple scales and with broad scope of application without the need for any form of retraining. We experimentally produced and characterized more than 100 proteins. Three high-resolution crystal structures and two cryo-electron microscopy density maps of designed single-chain proteins comprising up to 1000 amino acids validate the accuracy of the method. Our pipeline can also be used to design synthetic protein-protein interactions, as validated experimentally by a set of protein heterodimers. Relaxed sequence optimization offers attractive performance with respect to designability, scope of applicability for different design problems, and scalability across protein sizes.

Ex vivo or in vivo cell-hitchhiking has emerged as a potential means for efficient drug delivery and various disease therapies. However, many challenges remain, such as the complicated engineering process and dependence on ligand-receptor interaction. Here, we present a simple in vivo platelet-hitchhiking strategy based on self-assembling peptides without ligand modification. The engineered peptide nanofibers can hitchhike ultrafast (<5 s) and efficiently on both resting and activated platelets in a receptor-independent and species-independent manner. Mechanistic studies showed that unique secondary structure of nanofibers, which lead to surface exposure of hydrophobic and hydrogen bond-forming groups, might primarily contribute to the selective and efficient platelet-hitchhiking behavior. After intravenous injection, these peptide nanofibers hitchhiked in situ on circulating platelets and achieved almost 20-fold lung accumulation. Our study provides not only a different paradigm of in vivo platelet-hitchhiking beyond ligand-receptor recognition but also a potential strategy for lung-targeted drug delivery and pulmonary disease therapy.

Degenerative eye diseases cause partial or complete blindness due to photoreceptor degeneration. Optogenetic gene therapy is a revolutionary technique combining genetics and optical methods to control the function of neurons. Due to the inherent risk of photochemical damage, the light intensity necessary to activate Opto-mGluR6 surpasses the safe threshold for retinal illumination. Conversely, red-shifted lights pose a significantly lower risk of inducing such damage compared to blue lights. We designed red-shifted Opto-mGluR6 photopigments with a wide, red-shifted working spectrum compared to Opto-mGluR6 and examined their excitation capability in vitro. ROM19, ROM18 and ROM17, red-shifted variants of Opto-mGluR6, were designed by careful bioinformatics/computational studies. The predicted molecules with the best scores were selected, synthesised and cloned into the pAAV-CMV-IRES-EGFP vector. Expression of constructs was confirmed by functional assessment in engineered HEK-GIRK cells. Spectrophotometry and patch clamp experiments demonstrated that the candidate molecules were sensitive to the desired wavelengths of the light and directly coupled light stimuli to G-protein signalling. Herein, we introduce ROM17, ROM18 and ROM19 as newly generated, red-shifted variants with maximum excitation red-shifted of ~ 40nm, 70 nm and 126 nm compared to Opto-mGluR6., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Shamsnajafabadi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Proteins are the foundation of life, and designing functional proteins remains a key challenge in biotechnology. Before the development of AlphaFold2, the focus of design was primarily on structure-centric approaches such as using the well-known open-source software Rosetta3. Following the development of AlphaFold2, deep-learning techniques for protein design gained prominence. This study proposes a new method to generate functional proteins using the diffusion model and ESM2 protein language model. Diffusion models, which are widely used in image and natural language generation, are used here for protein design, facilitating the controlled generation of new sequences. The ESM2 model, trained on the basis of large-scale protein sequence data, provides a deep understanding of the context of the sequence, thus improving the model's ability to generate biologically relevant proteins. In this study, we used the Protein A-like peptide as a model study object, combined the diffusion model and the ESM2 model to generate new peptide sequences from minimal input data, and verified their biological activities through experiments such as the BLI affinity test. In conclusion, we developed a new method for protein design that provides a novel strategy to meet the challenges of generic protein generation.

The design and optimization of metabolic pathways, genetic systems, and engineered proteins rely on high-throughput assays to streamline design-build-test-learn cycles. However, assay development is a time-consuming and laborious process. Here, we create a generalizable approach for the tailored optimization of automated cell-free gene expression (CFE)-based workflows, which offers distinct advantages over in vivo assays in reaction flexibility, control, and time to data. Centered around designing highly accurate and precise transfers on the Echo Acoustic Liquid Handler, we introduce pilot assays and validation strategies for each stage of protocol development. We then demonstrate the efficacy of our platform by engineering transcription factor-based biosensors. As a model, we rapidly generate and assay libraries of 127 MerR and 134 CadR transcription factor variants in 3682 unique CFE reactions in less than 48 h to improve limit of detection, selectivity, and dynamic range for mercury and cadmium detection. This was achieved by assessing a panel of ligand conditions for sensitivity (to 0.1, 1, 10 μM Hg and 0, 1, 10, 100 μM Cd for MerR and CadR, respectively) and selectivity (against Ag, As, Cd, Co, Cu, Hg, Ni, Pb, and Zn). We anticipate that our Echo-based, cell-free approach can be used to accelerate multiple design workflows in synthetic biology.

Cancer therapy can be limited by potential side effects, and bacteria-based living cancer therapeutics have gained scientific interest in recent years. However, the full potential of bacteria as therapeutics has yet to be explored due to engineering challenges. In this study, we present a bacterial device designed to specifically target and eliminate breast cancer cells. We have engineered Escherichia coli ( E. coli ) to bind to HER2 receptors on breast cancer cells while also secreting a toxin, HlyE, which is a pore-forming protein. The binding of E. coli to HER2 is facilitated by a nanobody expressed on the bacteria's surface via the Ag43 autotransporter protein system. Our findings demonstrate that the nanobody efficiently binds to HER2+ cells in vitro , and we have utilized the YebF secretion tag to secrete HlyE and kill the target cancer cells. Overall, our results highlight the potential of our engineered bacteria as an innovative strategy for breast cancer treatment.

Exquisite binding specificity is essential for many protein functions but is difficult to engineer. Many biotechnological or biomedical applications require the discrimination of very similar ligands, which poses the challenge of designing protein sequences with highly specific binding profiles. Experimental methods for generating specific binders rely on in vitro selection, which is limited in terms of library size and control over specificity profiles. Additional control was recently demonstrated through high-throughput sequencing and downstream computational analysis. Here we follow such an approach to demonstrate the design of specific antibodies beyond those probed experimentally. We do so in a context where very similar epitopes need to be discriminated, and where these epitopes cannot be experimentally dissociated from other epitopes present in the selection. Our approach involves the identification of different binding modes, each associated with a particular ligand against which the antibodies are either selected or not. Using data from phage display experiments, we show that the model successfully disentangles these modes, even when they are associated with chemically very similar ligands. Additionally, we demonstrate and validate experimentally the computational design of antibodies with customized specificity profiles, either with specific high affinity for a particular target ligand, or with cross-specificity for multiple target ligands. Overall, our results showcase the potential of leveraging a biophysical model learned from selections against multiple ligands to design proteins with tailored specificity, with applications to protein engineering extending beyond the design of antibodies., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Fernandez-de-Cossio-Diaz et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Biocatalysis is an attractive approach for the synthesis of chiral pharmaceuticals and fine chemicals, but assessing and/or improving the enantioselectivity of biocatalyst towards target substrates is often time and resource intensive. Although machine learning has been used to reveal the underlying relationship between protein sequences and biocatalytic enantioselectivity, the establishment of substrate fitness space is usually disregarded by chemists and is still a challenge. Using 240 datasets collected in our previous works, we adopt chemistry and geometry descriptors and build random forest classification models for predicting the enantioselectivity of amidase towards new substrates. We further propose a heuristic strategy based on these models, by which the rational protein engineering can be efficiently performed to synthesize chiral compounds with higher ee values, and the optimized variant results in a 53-fold higher E-value comparing to the wild-type amidase. This data-driven methodology is expected to broaden the application of machine learning in biocatalysis research., (© 2024. The Author(s).)

Branching enzymes (BEs) confer to α-glucans, the primary energy-storage reservoir in nature, a variety of features, like slow digestion. The full catalytic cycle of BEs can be divided in six steps, namely two covalent catalytic steps involving glycosylation and transglycosylation, and four noncatalytic steps involving substrate binding and transfers (SBTs). Despite the ever-growing wealth of biochemical and structural information on BEs, clear mechanistic insights into SBTs from an industrial-performance perspective are still missing. Here, we report a Rhodothermus profundi BE (RpBE) endowed with twice as much enzymatic activity as the Rhodothermus obamensis BE currently used in industry. Furthermore, we focus on the SBTs for RpBE by means of large-scale computations supported by experiment. Engineering of the crucial positions responsible for the initial substrate-binding step improves enzymatic activity significantly, while offering a possibility to customize product types. In addition, we show that the high-efficiency substrate-transfer steps preceding glycosylation and transglycosylation are the main reason for the remarkable enzymatic activity of RpBE, suggestive of engineering directions for the BE family., (© 2024. The Author(s).)

With advanced computational methods, it is now feasible to modify or design proteins for specific functions, a process with significant implications for disease treatment and other medical applications. Protein structures and functions are intrinsically linked to their backbones, making the design of these backbones a pivotal aspect of protein engineering. In this study, we focus on the task of unconditionally generating protein backbones. By means of codebook quantization and compression dictionaries, we convert protein backbone structures into a distinctive coded language and propose a GPT-based protein backbone generation model, PB-GPT. To validate the generalization performance of the model, we trained and evaluated the model on both public datasets and small protein datasets. The results demonstrate that our model has the capability to unconditionally generate elaborate, highly realistic protein backbones with structural patterns resembling those of natural proteins, thus showcasing the significant potential of large language models in protein structure design., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 Elsevier Inc. All rights reserved.)

F-type ATP synthases are extensively researched protein complexes because of their widespread and central role in energy metabolism. Progress in structural biology, proteomics, and molecular biology has also greatly advanced our understanding of the catalytic mechanism, post-translational modifications, and biogenesis of chloroplast ATP synthases. Given their critical role in light-driven ATP generation, tailoring the activity of chloroplast ATP synthases and modeling approaches can be applied to modulate photosynthesis. In the future, advances in genetic manipulation and protein design tools will significantly expand the scope for testing new strategies in engineering light-driven nanomotors., Competing Interests: Conflict of interest statement. None declared., (© The Author(s) 2024. Published by Oxford University Press on behalf of American Society of Plant Biologists. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

With the development of antibody engineering, a diverse range of structures for T cell-dependent bispecific antibodies targeting CD3 have been devised to meet the needs of various clinical therapies. T cell-dependent bispecific antibodies can be categorized into IgG-like and non-IgG-like formats based on the presence or absence of an Fc domain. The most common difficulty in manufacturing bispecific antibodies is the mispairing between light and heavy chains. To overcome this challenge, several techniques, such as knob-into-hole and CrossMab technologies, have been implemented for structural design. Given that the mechanism of action of T cell-dependent bispecific antibodies is to redirect T cells to tumor cells to induce a killing effect, abolishment of Fc domain effector function, the affinity design of the target, and the distance design of immune synapse formation are all focal points in the structural design of T cell-dependent bispecific antibodies. This review aims to provide an overview of recent advances in the structural design of T cell-dependent bispecific antibodies.

The clinical utility of hemoglobin-based oxygen carriers (HBOC) is limited by adverse heme oxidative chemistry. A variety of tyrosine residues were inserted on the surface of the γ subunit of recombinant fetal hemoglobin to create novel electron transport pathways. This enhanced the ability of the physiological antioxidant ascorbate to reduce ferryl heme and decrease lipid peroxidation. The γL96Y mutation presented the best profile of oxidative protection unaccompanied by loss of protein stability and function. N-terminal deletions were constructed to facilitate the production of recombinant hemoglobin by fermentation and phenylalanine insertions in the heme pocket to decrease the rate of NO dioxygenation. The resultant mutant (αV1del. αL29F, γG1del. γV67F, γL96Y) significantly decreased NO scavenging and lipid peroxidation in vitro. Unlike native hemoglobin or a recombinant control (αV1del, γG1del), this mutation showed no increase in blood pressure immediately following infusion in a rat model of reperfusion injury, suggesting that it was also able to prevent NO scavenging in vivo. Infusion of the mutant also resulted in no meaningful adverse physiological effects apart from diuresis, and no increase in oxidative stress, as measured by urinary isoprostane levels. Following PEGylation via the Euro-PEG-Hb method to increase vascular retention, this novel protein construct was compared with saline in a severe rat reperfusion injury model (45% blood volume removal for 90 minutes followed by reinfusion to twice the volume of shed blood). Blood pressure and survival were followed for 4 h post-reperfusion. While there was no difference in blood pressure, the PEGylated Hb mutant significantly increased survival., (© 2024. The Author(s).)

Aggrescan4D (A4D) is an advanced computational tool designed for predicting protein aggregation, leveraging structural information and the influence of pH. Building upon its predecessor, Aggrescan3D (A3D), A4D has undergone numerous enhancements aimed at assisting the improvement of protein solubility. This manuscript reviews A4D's updated functionalities and explains the fundamental principles behind its pH-dependent calculations. Additionally, it presents an antibody case study to evaluate its performance in comparison with other structure-based predictors. Notably, A4D integrates advanced protein engineering protocols with pH-dependent calculations, enhancing its utility in advising solubility-enhancing mutations. A4D considers the impact of structural flexibility on aggregation propensities, and includes a large set of precalculated predictions. These capabilities should help to open new avenues for both understanding and managing protein aggregation. A4D is accessible through a dedicated web server at https://biocomp.chem.uw.edu.pl/a4d/., (© 2024 The Author(s). Protein Science published by Wiley Periodicals LLC on behalf of The Protein Society.)