Search

Cytochrome P450 (P450) enzymes dominate steroid metabolism. In general, the simple C-hydroxylation reactions are mechanistically straightforward and are generally agreed to involve a perferryl oxygen species (formally FeO3+). Several of the steroid transformations are more complex and involve C-C bond scission. We initiated mechanistic studies with several of these (i.e., 11A1, 17A1, 19A1, and 51A1) and have now established that the dominant modes of catalysis for P450s 19A1 and 51A1 involve a ferric peroxide anion (i.e., Fe3+O2¯) instead of a perferryl ion complex (FeO3+), as demonstrated with 18O incorporation studies. P450 17A1 is less clear. The indicated P450 reactions all involve sequential oxidations, and we have explored the processivity of these multi-step reactions. P450 19A1 is distributive, i.e., intermediate products dissociate and reassociate, but P450s 11A1 and 51A1 are highly processive. P450 17A1 shows intermediate processivity, as expected from the release of 17-hydroxysteroids for the biosynthesis of key molecules, and P450 19A1 is very distributive. P450 11B2 catalyzes a processive multi-step oxidation process with the complexity of a chemical closure of an intermediate to a locked lactol form. [ABSTRACT FROM AUTHOR]

Mitotic centromere-associated kinesin (MCAK) motor protein is a typical member of the kinesin-13 family, which can depolymerize microtubules from both plus and minus ends. A critical issue for the MCAK motor is how it performs the depolymerase activity. To address the issue, the pathway of the MCAK motor moving on microtubules and depolymerizing the microtubules is presented here. On the basis of the pathway, the dynamics of both the wild-type and mutant MCAK motors is studied theoretically, which include the full-length MCAK, the full-length MCAK with mutations in the α4-helix of the motor domain, the mutant full-length MCAK with a neutralized neck, the monomeric MCAK and the mutant monomeric MCAK with a neutralized neck. The studies show that a single dimeric MCAK motor can depolymerize microtubules in a processive manner, with either one tubulin or two tubulins being removed per times. The theoretical results are in agreement with the available experimental data. Moreover, predicted results are provided. [ABSTRACT FROM AUTHOR]

The SARS-CoV-2 helicase, non-structural protein 13 (Nsp13), plays an essential role in viral replication, translocating in the 5′ → 3′ direction as it unwinds double-stranded RNA/DNA. We investigated the impact of structurally distinct DNA lesions on DNA unwinding catalyzed by Nsp13. The selected lesions include two benzo[a]pyrene (B[a]P)-derived dG adducts, the UV-induced cyclobutane pyrimidine dimer (CPD), and the pyrimidine (6–4) pyrimidone (6–4PP) photolesion. The experimentally observed unwinding rate constants (kobs) and processivities (P) were examined. Relative to undamaged DNA, the kobs values were diminished by factors of up to ~15 for B[a]P adducts but only by factors of ~2–5 for photolesions. A minor-groove-oriented B[a]P adduct showed the smallest impact on P, which decreased by ~11% compared to unmodified DNA, while an intercalated one reduced P by ~67%. However, the photolesions showed a greater impact on the processivities; notably, the CPD, with the highest kobs value, exhibited the lowest P, which was reduced by ~90%. Our findings thus show that DNA unwinding efficiencies are lesion-dependent and most strongly inhibited by the CPD, leading to the conclusion that processivity is a better measure of DNA lesions' inhibitory effects than unwinding rate constants. [ABSTRACT FROM AUTHOR]

DNA methylation occurs predominantly on cytosine-phosphate-guanine (CpG) dinucleotides in the mammalian genome, and the methylation landscape is maintained over mitotic cell division. It has been posited that coupling of maintenance methylation activity among neighbouring CpGs is critical to stability over cellular generations; however, the mechanism is unclear. We used mathematical models and stochastic simulation to analyse data from experiments that probe genome-wide methylation of nascent DNA post-replication in cells. We find that DNA methylation maintenance rates on individual CpGs are locally correlated, and the degree of this correlation varies by genomic regional context. By using theory of protein diffusion along DNA, we show that exponential decay of methylation rate correlation with genomic distance is consistent with enzyme processivity. Our results provide quantitative evidence of genome-wide methyltransferase processivity in vivo. We further developed a method to disentangle different mechanistic sources of kinetic correlations. From the experimental data, we estimate that an individual methyltransferase methylates neighbour CpGs processively if they are 36 basepairs apart, on average. But other mechanisms of coupling dominate for longer inter-CpG distances. Our study demonstrates that quantitative insights into enzymatic mechanisms can be obtained from replication-associated, cell-based genome-wide measurements, by combining data-driven statistical analyses with hypothesis-driven mathematical modelling.

Pectin methylesterases (PMEs) modify homogalacturonan's chemistry and play a key role in regulating primary cell wall mechanical properties. Here, we report on Arabidopsis AtPME2 , which we found to be highly expressed during lateral root emergence and dark-grown hypocotyl elongation. We showed that dark-grown hypocotyl elongation was reduced in knock-out mutant lines as compared to the control. The latter was related to the decreased total PME activity as well as increased stiffness of the cell wall in the apical part of the hypocotyl. To relate phenotypic analyses to the biochemical specificity of the enzyme, we produced the mature active enzyme using heterologous expression in Pichia pastoris and characterized it through the use of a generic plant PME antiserum. AtPME2 is more active at neutral compared to acidic pH, on pectins with a degree of 55–70% methylesterification. We further showed that the mode of action of AtPME2 can vary according to pH, from high processivity (at pH8) to low processivity (at pH5), and relate these observations to the differences in electrostatic potential of the protein. Our study brings insights into how the pH-dependent regulation by PME activity could affect the pectin structure and associated cell wall mechanical properties. [ABSTRACT FROM AUTHOR]

Reverse transcriptases (RTs) are a family of enzymes that synthesize DNA using an RNA template and are involved in retrovirus propagation and telomere lengthening. In vitro, RTs are widely applied in various methods, including RNA-seq, RT-PCR, and RT-LAMP. Thermostable RTs from bacterial group II introns are promising tools for biotechnology due to their higher thermostability, fidelity, and processivity compared to commonly used M-MuLV RT and its mutants. However, the diversity of group II intron-encoded RTs is still understudied. In this work, we biochemically characterized a novel RT from a thermophilic bacterium, Anoxybacillus flavithermus, which was isolated from a hot spring in New Zealand and has an optimal growth temperature of around 60 °C. The cloned RT, named Afl RT, retained approximately 40% of the specific activity after a 45 min incubation at 50 °C. The optimal pH was 8.5, the optimal temperature was between 45 and 50 °C, and Mn2+ ions were found to be an optimal cofactor. The processivity analysis with MS2 phage gRNA (3569 b) demonstrated that Afl RT elongated fully up to 36% of the template molecules. In reverse transcription and RT-qLAMP, the enzyme allowed up to 10 copies of MS2 phage genomic RNA to be detected per reaction. Thus, Afl RT holds great potential for a variety of practical applications that require the use of thermostable and processive RTs. [ABSTRACT FROM AUTHOR]

Cloning and expression of the full-length endo-processive-type xyloglucanase from the Trichoderma reesei (TrXeg74A) fungus, as well as its catalytic domain TrXeg74A-CD, in the Penicillium verruculosum B1-537 recipient strain have been carried out. P. verruculosum is a highly effective producer of cellulases. The levels of protein secretion after culturing the obtained recombinant strains in a laboratory fermenter were 35.4 and 31.4 g/L, respectively. TrXeg74A accounted for at least 30% of the total protein, while TrXeg74A-CD was expressed to a much lesser extent. Both forms of the recombinant enzyme were isolated in purified state and their properties were studied. TrXeg74A and TrXeg74A-CD were characterized by a similar degree of processivity when exposed to tamarind xyloglucan and the same Michaelis constant (0.35-0.38 g/L), close to that for the native enzyme (0.30 g/L), while the catalytic constant for TrXeg74A-CD was 1.5 times higher than the corresponding parameter for full-length xyloglucanase. The obtained new recombinant P. verruculosum strains can be useful in the development of composite enzyme preparations for efficient hydrolysis of renewable lignocellulosic raw materials. [ABSTRACT FROM AUTHOR]

In the same way that specialized DNA polymerases (DNAPs) replicate cellular and viral genomes, only a handful of dedicated proteins from various natural origins as well as engineered versions are appropriate for competent exponential amplification of whole genomes and metagenomes (WGA). Different applications have led to the development of diverse protocols, based on various DNAPs. Isothermal WGA is currently widely used due to the high performance of Φ29 DNA polymerase, but PCR-based methods are also available and can provide competent amplification of certain samples. Replication fidelity and processivity must be considered when selecting a suitable enzyme for WGA. However, other properties, such as thermostability, capacity to couple replication, and double helix unwinding, or the ability to maintain DNA replication opposite to damaged bases, are also very relevant for some applications. In this review, we provide an overview of the different properties of DNAPs widely used in WGA and discuss their limitations and future research directions. [ABSTRACT FROM AUTHOR]

The protein encoded by the vaccinia virus D4R gene has base excision repair uracil–DNA N-glycosylase (vvUNG) activity and also acts as a processivity factor in the viral replication complex. The use of a protein unlike PolN/PCNA sliding clamps is a unique feature of orthopoxviral replication, providing an attractive target for drug design. However, the intrinsic processivity of vvUNG has never been estimated, leaving open the question whether it is sufficient to impart processivity to the viral polymerase. Here, we use the correlated cleavage assay to characterize the translocation of vvUNG along DNA between two uracil residues. The salt dependence of the correlated cleavage, together with the similar affinity of vvUNG for damaged and undamaged DNA, support the one-dimensional diffusion mechanism of lesion search. Unlike short gaps, covalent adducts partly block vvUNG translocation. Kinetic experiments show that once a lesion is found it is excised with a probability ~0.76. Varying the distance between two uracils, we use a random walk model to estimate the mean number of steps per association with DNA at ~4200, which is consistent with vvUNG playing a role as a processivity factor. Finally, we show that inhibitors carrying a tetrahydro-2,4,6-trioxopyrimidinylidene moiety can suppress the processivity of vvUNG. [ABSTRACT FROM AUTHOR]

Kinesin-14s are microtubule-based motor proteins that play important roles in mitotic spindle assembly [1]. Ncd-type kinesin-14s are a subset of kinesin-14 motors that exist as homodimers with an N-terminal microtubule-binding tail, a coiled-coil central stalk (central stalk), a neck, and two identical C-terminal motor domains. To date, no Ncd-type kinesin-14 has been found to naturally exhibit long-distance minus-end-directed processive motility on single microtubules as individual homodimers. Here, we show that GiKIN14a from Giardia intestinalis [2] is an unconventional Ncd-type kinesin-14 that uses its N-terminal microtubule-binding tail to achieve minus-end-directed processivity on single microtubules over micrometer distances as a homodimer. We further find that although truncation of the N-terminal tail greatly reduces GiKIN14a processivity, the resulting tailless construct GiKIN14a-Δtail is still a minimally processive motor and moves its center of mass via discrete 8-nm steps on the microtubule. In addition, full-length GiKIN14a has significantly higher stepping and ATP hydrolysis rates than does GiKIN14a-Δtail. Inserting a flexible polypeptide linker into the central stalk of full-length GiKIN14a nearly reduces its ATP hydrolysis rate to that of GiKIN14a-Δtail. Collectively, our results reveal that the N-terminal tail of GiKIN14a is a de facto dual regulator of motility and reinforce the notion of the central stalk as a key mechanical determinant of kinesin-14 motility [3].

DNA polymerases are a superfamily of enzymes synthesizing DNA using DNA as a template. They are essential for nucleic acid metabolism and for DNA replication and repair. Modern biotechnology and molecular diagnostics rely heavily on DNA polymerases in analyzing nucleic acids. Among a variety of discovered DNA polymerases, Bst polymerase, a large fragment of DNA polymerase I from Geobacillus stearothermophilus, is one of the most commonly used but is not as well studied as Taq polymerase. The ability of Bst polymerase to displace an upstream DNA strand during synthesis, coupled with its moderate thermal stability, has provided the basis for several isothermal DNA amplification methods, including LAMP, WGA, RCA, and many others. Bst polymerase is one of the key components defining the robustness and analytical characteristics of diagnostic test systems based on isothermal amplification. Here, we present an overview of the biochemical and structural features of Bst polymerase and provide information on its mutated analogs.

Reverse transcriptases (RTs) are a family of enzymes that synthesize DNA using an RNA template and are involved in retrovirus propagation and telomere lengthening. In vitro, RTs are widely applied in various methods, including RNA-seq, RT-PCR, and RT-LAMP. Thermostable RTs from bacterial group II introns are promising tools for biotechnology due to their higher thermostability, fidelity, and processivity compared to commonly used M-MuLV RT and its mutants. However, the diversity of group II intron-encoded RTs is still understudied. In this work, we biochemically characterized a novel RT from a thermophilic bacterium, Anoxybacillus flavithermus, which was isolated from a hot spring in New Zealand and has an optimal growth temperature of around 60 °C. The cloned RT, named Afl RT, retained approximately 40% of the specific activity after a 45 min incubation at 50 °C. The optimal pH was 8.5, the optimal temperature was between 45 and 50 °C, and Mn2+ ions were found to be an optimal cofactor. The processivity analysis with MS2 phage gRNA (3569 b) demonstrated that Afl RT elongated fully up to 36% of the template molecules. In reverse transcription and RT-qLAMP, the enzyme allowed up to 10 copies of MS2 phage genomic RNA to be detected per reaction. Thus, Afl RT holds great potential for a variety of practical applications that require the use of thermostable and processive RTs.

TIN2 is an important regulator of telomere length, and mutations in TINF2, the gene encoding TIN2, cause short-telomere syndromes. While the genetics underscore the importance of TIN2, the mechanism through which TIN2 regulates telomere length remains unclear. Here, we tested the effects of human TIN2 on telomerase activity. We identified a new isoform in human cells, TIN2M, that is expressed at levels similar to those of previously studied TIN2 isoforms. All three TIN2 isoforms localized to and maintained telomere integrity in vivo, and localization was not disrupted by telomere syndrome mutations. Using direct telomerase activity assays, we discovered that TIN2 stimulated telomerase processivity in vitro All of the TIN2 isoforms stimulated telomerase to similar extents. Mutations in the TPP1 TEL patch abrogated this stimulation, suggesting that TIN2 functions with TPP1/POT1 to stimulate telomerase processivity. We conclude from our data and previously published work that TIN2/TPP1/POT1 is a functional shelterin subcomplex.

Lignocellulosic biomass is a renewable source of energy, chemicals and materials. Many applications of this resource require the depolymerization of one or more of its polymeric constituents. Efficient enzymatic depolymerization of cellulose to glucose by cellulases and accessory enzymes such as lytic polysaccharide monooxygenases is a prerequisite for economically viable exploitation of this biomass. Microbes produce a remarkably diverse range of cellulases, which consist of glycoside hydrolase (GH) catalytic domains and, although not in all cases, substrate-binding carbohydrate-binding modules (CBMs). As enzymes are a considerable cost factor, there is great interest in finding or engineering improved and robust cellulases, with higher activity and stability, easy expression, and minimal product inhibition. This review addresses relevant engineering targets for cellulases, discusses a few notable cellulase engineering studies of the past decades and provides an overview of recent work in the field. [ABSTRACT FROM AUTHOR]

Multifunctional endoglucanase, Rf GH5_4 from Ruminococcus flavefaciens showed (β/α) 8 -TIM barrel structure by homology modeling. Glu168 and Glu292 residues acted as general acid and base during catalysis. Circular Dichroism results, 40.83 % α-helices, 13.84 % β-strands and 45 % random turns-coils for Rf GH5_4 corroborated with predictions by PSIPRED and SOPMA. Molecular Dynamic simulation of Rf GH5_4 for 100 ns showed RMSD, 0.71 nm while for Rf GH5_4 - Cellopentaose complex was 0.55 nm, confirming that the binding of cellulosic ligand stabilizes its structural fold. Rf GH5_4 showed strong affinity towards cellulosic ligands having higher degree of polymerization such as cellohexaose (−11.70 kcal/mol) and cellodecaose (−12.64 kcal/mol). Interestingly, complex hemicellulosic ligands such as XLLG of xyloglucan also showed higher affinity (−13.2 kcal/mol) and accommodated at Rf GH5_4 active-site. Its catalytic cleft was broad enough to accommodate and hydrolyse various cellulosic and hemicellulosic ligands like XLLG of xyloglucan setting the basis of multifunctionality of Rf GH5_4. Loops L2, L3 and L4 having Trp58 formed barrier at active-site of Rf GH5_4 were responsible for processivity. Rf GH5_4 showed monodispersed state at 2.5 mg/mL and a rattle-toy shape by SAXS. Zeta potential, −16 mV of Rf GH5_4 indicated its higher stability. Multifunctional Rf GH5_4 endoglucanase could be beneficial for generation lignocellulosic bioethanol and in health, prebiotic and food sector. [Display omitted] • (β/α) 8 -TIM barrel structure of Rf GH5_4 contains 40.83 % α-helices, 13.84 % β-strands. • Active-site of Rf GH5_4 could fit large ligands, cellopentaose to cellodecaose. • Multifunctional endoglucanase, Rf GH5_4 also shows strong affinity for xyloglucan. • Loops, L2, L3 and L4 with Trp58 at active-site of Rf GH5_4 shape its processivity. • SAXS of Rf GH5_4 revealed monodispersed state and rattle-toy shape at 2.5 mg/mL. [ABSTRACT FROM AUTHOR]

The transportation of the cargoes in biological cells is primarily driven by the motor proteins on filamentous protein tracks. The stochastic nature of the motion of motor protein often leads to its spontaneous detachment from the track. We formulate a mathematical model to study the effect of the detachment of motor protein on its track bound transport. We calculate two quantities: the distance traveled by the motor protein in given time, and the average time taken by a single motor protein to reach a target distance. Expectedly, both of these quantities decrease with the increasing detachment rate if the motor velocity is kept fixed. However, the existing experimental data suggest that a change in the detachment rate also affects the velocity of the motor protein. This relation between motor protein speed and its detachment rate results in a non-monotonic dependence on the distance traveled in fixed time and transport rate to a fixed distance. Therefore, we demonstrate that optimal motor speeds can be identified for the time and distance controlled conditions. [ABSTRACT FROM AUTHOR]

Formins are a conserved group of proteins that nucleate and processively elongate actin filaments. Among them, the formin homology domain-containing protein (FHOD) family of formins contributes to contractility of striated muscle and cell motility in several contexts. However, the mechanisms by which they carry out these functions remain poorly understood. Mammalian FHOD proteins were reported not to accelerate actin assembly in vitro; instead, they were proposed to act as barbed end cappers or filament bundlers. Here, we show that purified Drosophila Fhod and human FHOD1 both accelerate actin assembly by nucleation. The nucleation activity of FHOD1 is restricted to cytoplasmic actin, whereas Drosophila Fhod potently nucleates both cytoplasmic and sarcomeric actin isoforms. Drosophila Fhod binds tightly to barbed ends, where it slows elongation in the absence of profilin and allows, but does not accelerate, elongation in the presence of profilin. Fhod antagonizes capping protein but dissociates from barbed ends relatively quickly. Finally, we determined that Fhod binds the sides of and bundles actin filaments. This work establishes that Fhod shares the capacity of other formins to nucleate and bundle actin filaments but is notably less effective at processively elongating barbed ends than most well studied formins.

One of the critical steps in lignocellulosic deconstruction is the hydrolysis of crystalline cellulose by cellulases. Endoglucanases initially facilitate the breakdown of cellulose in lignocellulosic biomass and are further aided by other cellulases to produce fermentable sugars. Furthermore, if the endoglucanase is processive, it can adsorb to the smooth surface of crystalline cellulose and release soluble sugars during repeated cycles of catalysis before dissociating. Most glycoside hydrolase family 9 (GH9) endoglucanases have catalytic domains linked to a CBM (carbohydrate-binding module) (mostly CBM3) and present the second-largest cellulase family after GH5. GH9 endoglucanases are relatively less characterized. Bacillus licheniformis is a mesophilic soil bacterium containing many glycoside hydrolase (GH) enzymes. We identified an endoglucanase gene, gh9A, encoding the GH9 family enzyme H1AD14 in B. licheniformis and cloned and overexpressed H1AD14 in Escherichia coli. The purified H1AD14 exhibited very high enzymatic activity on endoglucanase substrates, such as β-glucan, lichenan, Avicel, CMC-Na (sodium carboxymethyl cellulose) and PASC (phosphoric acid swollen cellulose), across a wide pH range. The enzyme is tolerant to 2 M sodium chloride and retains 74% specific activity on CMC after 10 days, the highest amongst the reported GH9 endoglucanases. The full-length H1AD14 is a processive endoglucanase and efficiently saccharified sugarcane bagasse. The deletion of the CBM reduces the catalytic activity and processivity. The results add to the sparse knowledge of GH9 endoglucanases and offer the possibility of characterizing and engineering additional enzymes from B. licheniformis toward developing a cellulase cocktail for improved biomass deconstruction. Key points: • H1AD14 is a highly active and processive GH9 endoglucanase from B. licheniformis. • H1AD14 is thermostable and has a very long half-life. • H1AD14 showed higher saccharification efficiency than commercial endoglucanase [ABSTRACT FROM AUTHOR]

The inefficient decomposition of polysaccharides, particularly branched polysaccharides limits their large-scale industrial applications. Further understanding and modification of glycoside hydrolases (GHs) processivity is expected to overcome this limitation. Here, a novel xanthan-binding CBM (Mi XBM), which was supposed to alter the processivity of GHs, was systematically characterized. Phylogeny and structure analyses indicated that Mi XBM is closely related to putative polysaccharide side chain-binding modules. Quantitative binding assays further revealed that Mi XBM probably has a high affinity for xanthan side chain via a variable loop site. Moreover, catalytic performance demonstrated that xanthanase chimeras containing Mi XBM promote highly efficient hydrolysis of xanthan because of improved substrate accessibility. Notably, Mi XBM was observed to enhance the processivity of xanthanase, owing to its high substrate affinity to the repeating unit xanthan. Furthermore, sequential hydrolysis of xanthan by xanthanases with varying processivity resulted in significantly increased hydrolytic efficiency and focused oligoxanthans array. These results expand understanding of CBM-substrate recognition and shed light on efficient degradation of other regularly branched polysaccharides using modified GHs. [Display omitted] [ABSTRACT FROM AUTHOR]

Vitamin K-dependent (VKD) proteins undergo an unusual post-translational modification, which is the conversion of specific Glu residues to carboxylated Glu (Gla). Gla generation is required for the activation of VKD proteins, and occurs in the endoplasmic reticulum during their secretion to either the cell surface or from the cell. The gamma-glutamyl carboxylase produces Gla using reduced vitamin K, which becomes oxygenated to vitamin K epoxide. Reduced vitamin K is then regenerated by a vitamin K oxidoreductase (VKORC1), and this interconversion of oxygenated and reduced vitamin K is referred to as the vitamin K cycle. Many of the VKD proteins support hemostasis, which is suppressed during therapy with warfarin that inhibits VKORC1 activity. VKD proteins also impact a broad range of physiologies beyond hemostasis, which includes regulation of calcification, apoptosis, complement, growth control, signal transduction and angiogenesis. The review covers the roles of VKD proteins, how they become activated, and how disruption of carboxylation can lead to disease. VKD proteins contain clusters of Gla residues that form a calcium-binding module important for activity, and carboxylase processivity allows the generation of multiple Glas. The review discusses how impaired carboxylase processivity results in the pseudoxanthoma elasticum-like disease. [ABSTRACT FROM AUTHOR]

As dividing cells transition into mitosis, hundreds of proteins are phosphorylated by a complex of cyclin‐dependent kinase 1 (CDK1) and Cyclin‐B, often at multiple sites. CDK1:Cyclin‐B phosphorylation patterns alter conformations, interaction partners, and enzymatic activities of target proteins and need to be recapitulated in vitro for the structural and functional characterization of the mitotic protein machinery. This requires a pure and active recombinant kinase complex. The kinase activity of CDK1 critically depends on the phosphorylation of a Threonine residue in its activation loop by a CDK1‐activating kinase (CAK). We developed protocols to activate CDK1:Cyclin‐B either in vitro with purified CAKs or in insect cells through CDK‐CAK co‐expression. To boost kinase processivity, we reconstituted a ternary complex consisting of CDK1, Cyclin‐B, and CKS1. In this work, we provide and compare detailed protocols to obtain and use highly active CDK1:Cyclin‐B (CC) and CDK1:Cyclin‐B:CKS1 (CCC). [ABSTRACT FROM AUTHOR]

It is more than 25 years since the discovery that kinesin 1 is phosphorylated by several protein kinases. However, fundamental questions still remain as to how specific protein kinase(s) contribute to particular motor functions under physiological conditions. Because, within an whole organism, kinase cascades display considerable crosstalk and play multiple roles in cell homeostasis, deciphering which kinase(s) is/are involved in a particular process has been challenging. Previously, we found that GSK3β plays a role in motor function. Here, we report that a particular site on kinesin 1 motor domain (KHC), S314, is phosphorylated by GSK3β in vivo. The GSK3β-phosphomimetic-KHCS314D stalled kinesin 1 motility without dissociating from microtubules, indicating that constitutive GSK3β phosphorylation of the motor domain acts as a STOP. In contrast, uncoordinated mitochondrial motility was observed in CRISPR/Cas9-GSK3β non-phosphorylatable-KHCS314A Drosophila larval axons, owing to decreased kinesin 1 attachment to microtubules and/or membranes, and reduced ATPase activity. Together, we propose that GSK3β phosphorylation fine-tunes kinesin 1 movement in vivo via differential phosphorylation, unraveling the complex in vivo regulatory mechanisms that exist during axonal motility of cargos attached to multiple kinesin 1 and dynein motors. [ABSTRACT FROM AUTHOR]

Kinesin‐13 MCAK, which is composed of two identical motor domains, can undergo unbiased one‐dimensional diffusion on microtubules. Kinesin‐14 Cik1‐Kar3, which is composed of a Kar3 motor domain and a Cik1 motor homology domain with no ATPase activity, can move processively toward the minus end of microtubules. Here, we present a model for the diffusion of MCAK homodimer and a model for the processive motion of Cik1‐Kar3 heterodimer. Although the two dimeric motors show different domain composition, in the models it is proposed that the two motors use the similar physical mechanism to move processively. With the models, the dynamics of the two dimers is studied analytically. The theoretical results for MCAK reproduce quantitatively the available experimental data about diffusion constant and lifetime of the motor bound to microtubule in different nucleotide states. The theoretical results for Cik1‐Kar3 reproduce quantitatively the available experimental data about load dependence of velocity and explain consistently the available experimental data about effects of the exchange and mutation of the motor homology domain on the velocity of the heterodimer. Moreover, predicted results for other aspects of the dynamics of the two dimers are provided. [ABSTRACT FROM AUTHOR]

Although stutter is a well-known artifact of STR amplification for DNA typing, it is very difficult to reduce. In this study, we determined whether stutter could be reduced by PCR using previously untested high-performance polymerases, or by droplet PCR that reduced the reaction volume to approximately 1 nL. At the D5S818 locus, our results using control DNA 9948 as a template showed that decreasing PCR volume by droplet PCR did not affect the stutter ratio, whereas high-fidelity polymerases, PrimeSTAR HS, PrimeSTAR MAX, iProof HF, and SuperFi, achieved lower stutter ratios than AmpliTaq Gold 360. To confirm this effect of reducing stutter for other STR loci, triplex PCR was performed for D21S11 and D18S51. The results showed that SuperFi had the lowest stutter ratio among the high-fidelity polymerases, followed by PrimeSTAR MAX. PrimeSTAR HS showed higher stutter ratios at D21S11 and D18S51, and iProof HF showed a higher stutter ratio at D18S51, compared with AmpliTaq Gold 360. The stutter ratios of PrimeSTAR MAX and SuperFi at D18S51 were almost the same as that of AmpliTaq Gold 360. Furthermore, we compared the stutter ratio distribution of 63 samples of AmpliTaq Gold 360 and SuperFi, the latter of which had the lowest stutter ratio in this study. The average stutter values at the loci D5S818, D21S11, and D18S51 were 5.56%, 7.47%, and 6.53% for AmpliTaq Gold 360, but 0.86%, 1.64%, and 5.18% for SuperFi, respectively. SuperFi had significantly lower stutter at all three loci (p 300×), but it was considered that slippage was not directly involved in the replication errors. Besides, it was suggested that high processivity, which has been considered to be effective for reducing stutter, was actually ineffective. It is highly possible that the stutter formation mechanism of STR involves slippage resulting from the pausing of polymerase due to conformational changes. Although the details about SuperFi's function as a high-fidelity polymerase have not been published by the manufacturer, it is considered that it relieves the pausing of polymerase to achieve accurate replication.

Processive cytoskeletal motors from the myosin, kinesin, and dynein families walk on actin filaments and microtubules to drive cellular transport and organization in eukaryotic cells. These remarkable molecular machines are able to take hundreds of successive steps at speeds of up to several microns per second, allowing them to effectively move vesicles and organelles throughout the cytoplasm. Here, we focus on single-molecule fluorescence techniques and discuss their wide-ranging applications to the field of cytoskeletal motor research. We cover both traditional fluorescence and sub-diffraction imaging of motors, providing examples of how fluorescence data can be used to measure biophysical parameters of motors such as coordination, stepping mechanism, gating, and processivity. We also outline some remaining challenges in the field and suggest future directions.

EG1 from Volvariella volvacea is a processive endoglucanase belonging to glycoside hydrolase family 5. The impacts of cotton linter pulp characteristics, such as degree of polymerization (DP), crystallinity, and the initial cellulose-reducing ends, on the processivity of EG1 were investigated. Three commercial cotton linter pulp with different DP were used in present study. Ball milling was used to alter the crystallinity and DP of cellulose. The results indicate that the crystallinity has the most significant impact on enzyme processivity followed by initial cellulose-reducing ends. Whereas the DP indirectly affects the enzymatic hydrolysis and influenced by the pulp preparation method and conditions. The initial cellulose-reducing ends also affect enzyme adsorption but their impact is not obvious when the crystallinity is very low. These results also demonstrate the endo- and exo-action are both exist for EG1. The processive exo-action can start from the newly created cellulose-reducing ends by endo-action as well as the initial cellulose-reducing ends. The contribution of initial cellulose-reducing ends is affected by its quantity and cellulose crystallinity. A plausible action mode for EG1 is also proposed. [ABSTRACT FROM AUTHOR]

Dextransucrases released by certain lactic acid bacteria form glucose polymers with predominantly α-1,6-linkages and may be exploited biotechnologically for the tailored production of polysaccharides with application potential. Despite releasing two closely related dextransucrases, previous studies showed that water kefir borne Liquorilactobacillus (L.) hordei TMW 1.1822 and L. nagelii TMW 1.1827 produce different amounts of polysaccharides with distinct particle sizes (molecular weight and radius of gyration) and molecular architectures. To investigate where these differences originate and thus to provide deeper insights into the functionally diverse nature of polysaccharide formation during water kefir fermentation, we constructed two variants of the L. nagelii dextransucrase—a full-length enzyme and a truncated variant, devoid of a C-terminal glucan-binding domain that reflects the domain architecture of the L. hordei dextransucrase—and applied them at various enzyme concentrations to form dextran over 24 h. The full-length enzyme exhibited a high activity, forming constant amounts of dextran until a four-fold dilution, whereas the truncated variant showed a gradual decrease in activity and dextran formation at an increasing dilution. The application of the full-length enzyme resulted in higher average particle sizes compared to the truncated variant. However, the dilution of the enzyme extracts also led to a slight increase in the average particle size in both enzymes. Neither the domain architecture nor the enzyme concentration had an impact on the structural architecture of the dextrans. The presented results thus suggest that the comparatively higher processivity of the L. nagelii dextransucrase is predominantly caused by the additional C-terminal glucan-binding domain, which is absent in the L. hordei dextransucrase. The average particle size may be influenced, to some extent, by the applied reaction conditions, whereas the structural architecture of the dextrans is most likely caused by differences in the amino acid sequence of the catalytic domain.

The function of polysaccharides is intimately associated with their size, which is largely determined by the processivity of transferases responsible for their synthesis. A tunnel active center architecture has been recognized as a key factor that governs processivity of several glycoside hydrolases (GHs), e.g., cellulases and chitinases. Similar tunnel architecture is also observed in the Limosilactobacillus reuteri 121 GtfB (Lr121 GtfB) α-glucanotransferase from the GH70 family. The molecular element underpinning processivity of these transglucosylases remains underexplored. Here, we report the synthesis of the smallest (α1 → 4)-α-glucan interspersed with linear and branched (α1 → 6) linkages by a novel 4,6-α-glucanotransferase from L. reuteri N1 (LrN1 GtfB) with an open-clefted active center instead of the tunnel structure. Notably, the loop swapping engineering of LrN1 GtfB and Lr121 GtfB based on their crystal structures clarified the impact of the loop-mediated tunnel/cleft structure at the donor subsites -2 to -3 on processivity of these α-glucanotransferases, enabling the tailoring of both product sizes and substrate preferences. This study provides unprecedented insights into the processivity determinants and evolutionary diversification of GH70 α-glucanotransferases and offers a simple route for engineering starch-converting α-glucanotransferases to generate diverse α-glucans for different biotechnological applications.

The polymerase chain reaction (PCR) is an extensively used technique to quickly and accurately make many copies of a specific segment of DNA. In addition to naturally existing DNA polymerases, PCR utilizes a range of genetically modified recombinant DNA polymerases, each characterized by varying levels of processivity and fidelity. Pfu-Sso7d, a fusion DNA polymerase, is obtained by the fusion of Sso7d, a small DNA-binding protein, with Pfu DNA polymerase. Pfu-Sso7d is known for its high processivity, efficiency, and fidelity but is sold at a sumptuously high price under various trade names and commercial variants. We recently reported a quick and easy purification protocol that utilizes ethanol or acetone to precipitate Pfu-Sso7d from heat-cleared lysates. We also optimized a PCR buffer solution that outperforms commercial buffers when used with Pfu-Sso7d. Here, we provide a step-by-step guide on how to purify recombinant Pfu-Sso7d. This purification protocol and the buffer system will offer researchers cost-efficient access to fusion polymerase. Key features • We detail a precipitation-based protocol utilizing ethanol and acetone for purifying Pfu-Sso7d. • Despite ethanol and acetone displaying effective precipitation efficiency, acetone is preferred for its superior performance. • Furthermore, we present a PCR buffer that outperforms commercially available PCR buffers. • The Pfu-Sso7d purified in-house and the described PCR buffer exhibit excellent performance in PCR applications., Competing Interests: Competing interestsThe authors declare no competing financial interests., (©Copyright : © 2024 The Authors; This is an open access article under the CC BY-NC license.)

The spatial organization of the cell depends upon intracellular trafficking of cargos hauled along microtubules and actin filaments by the molecular motor proteins kinesin, dynein, and myosin. Although much is known about how single motors function, there is significant evidence that cargos in vivo are carried by multiple motors. While some aspects of multiple motor function have received attention, how the cargo itself - and motor organization on the cargo-affects transport has not been considered. To address this, we have developed a three-dimensional Monte Carlo simulation of motors transporting a spherical cargo, subject to thermal fluctuations that produce both rotational and translational diffusion. We found that these fluctuations could exert a load on the motor(s), significantly decreasing the mean travel distance and velocity of large cargos, especially at large viscosities. In addition, the presence of the cargo could dramatically help the motor to bind productively to the microtubule: the relatively slow translational and rotational diffusion of moderately sized cargos gave the motors ample opportunity to bind to a microtubule before the motor/cargo ensemble diffuses out of range of that microtubule. For rapidly diffusing cargos, the probability of their binding to a microtubule was high if there were nearby microtubules that they could easily reach by translational diffusion. Our simulations found that one reason why motors may be approximately 100 nm long is to improve their 'on' rates when attached to comparably sized cargos. Finally, our results suggested that to efficiently regulate the number of active motors, motors should be clustered together rather than spread randomly over the surface of the cargo. While our simulation uses the specific parameters for kinesin, these effects result from generic properties of the motors, cargos, and filaments, so they should apply to other motors as well.

Particles of many paramyxoviruses include small amounts of proteins with a molecular weight of about 20 kDa. These proteins, termed “C”, are basic, have low amino acid homology and some secondary structure conservation. C proteins are encoded in alternative reading frames of the phosphoprotein gene. Some viruses express nested sets of C proteins that exert their functions in different locations: In the nucleus, they interfere with cellular transcription factors that elicit innate immune responses; in the cytoplasm, they associate with viral ribonucleocapsids and control polymerase processivity and orderly replication, thereby minimizing the activation of innate immunity. In addition, certain C proteins can directly bind to, and interfere with the function of, several cytoplasmic proteins required for interferon induction, interferon signaling and inflammation. Some C proteins are also required for efficient virus particle assembly and budding. C-deficient viruses can be grown in certain transformed cell lines but are not pathogenic in natural hosts. C proteins affect the same host functions as other phosphoprotein gene-encoded proteins named V but use different strategies for this purpose. Multiple independent systems to counteract host defenses may ensure efficient immune evasion and facilitate virus adaptation to new hosts and tissue environments.

Carbohydrate polymers exhibit incredible chemical and structural diversity, yet are produced by polymerases without a template to guide length and composition. As the length of carbohydrate polymers is critical for their biological functions, understanding the mechanisms that determine polymer length is an important area of investigation. Most Gram-positive bacteria produce anionic glycopolymers called lipoteichoic acids (LTA) that are synthesized by lipoteichoic acid synthase (LtaS) on a diglucosyl-diacylglycerol (Glc2DAG) starter unit embedded in the extracellular leaflet of the cell membrane. LtaS can use phosphatidylglycerol (PG) as an alternative starter unit, but PG-anchored LTA polymers are significantly longer, and cells that make these abnormally long polymers exhibit major defects in cell growth and division. To determine how LTA polymer length is controlled, we reconstituted Staphylococcus aureus LtaS in vitro. We show that polymer length is an intrinsic property of LtaS that is directly regulated by the identity and concentration of lipid starter units. Polymerization is processive, and the overall reaction rate is substantially faster for the preferred Glc2DAG starter unit, yet the use of Glc2DAG leads to shorter polymers. We propose a simplemechanism to explain this surprising result: free starter units terminate polymerization by displacing the lipid anchor of the growing polymer from its binding site on the enzyme. Because LtaS is conserved across most Gram-positive bacteria and is important for survival, this reconstituted system should be useful for characterizing inhibitors of this key cell envelope enzyme. [ABSTRACT FROM AUTHOR]

Cellulose is the most abundant biomass on Earth, and many microorganisms depend on it as a source of energy. It consists mainly of crystalline and amorphous regions, and natural degradation of the crystalline part is highly dependent on the degree of processivity of the degrading enzymes (i.e., the extent of continuous hydrolysis without detachment from the substrate cellulose). Here, we report high-speed atomic force microscopic (HS-AFM) observations of the movement of four types of cellulases derived from the cellulolytic bacteria Cellulomonas fimi on various insoluble cellulose substrates. The HS-AFM images clearly demonstrated that two of them (CfCel6B and CfCel48A) slide on crystalline cellulose. The direction of processive movement of CfCel6B is from the nonreducing to the reducing end of the substrate, which is opposite that of processive cellulase Cel7A of the fungus Trichoderma reesei (TrCel7A), whose movement was first observed by this technique, while CfCel48A moves in the same direction as TrCel7A. When CfCel6B and TrCel7A were mixed on the same substrate, “traffic accidents” were observed, in which the two cellulases blocked each other’s progress. The processivity of CfCel6B was similar to those of fungal family 7 cellulases but considerably higher than those of fungal family 6 cellulases. The results indicate that bacteria utilize family 6 cellulases as high-processivity enzymes for efficient degradation of crystalline cellulose, whereas family 7 enzymes have the same function in fungi. This is consistent with the idea of convergent evolution of processive cellulases in fungi and bacteria to achieve similar functionality using different protein foldings. [ABSTRACT FROM AUTHOR]

Molecular motors and machines are essential for all cellular processes that together enable life. Built from proteins with a wide range of properties, functionalities and performance characteristics, biological motors perform complex tasks and can transduce chemical energy into mechanical work more efficiently than human-made combustion engines. Sophisticated studies of biological protein motors have provided many structural and biophysical insights and enabled the development of models for motor function. However, from the study of highly evolved, biological motors, it remains difficult to discern detailed mechanisms, for example, about the relative role of different force generation mechanisms, or how information is communicated across a protein to achieve the necessary coordination. A promising, complementary approach to answering these questions is to build synthetic protein motors from the bottom up. Indeed, much effort has been invested in functional protein design, but so far, the "holy grail" of designing and building a functional synthetic protein motor has not been realized. Here, we review the progress made to date, and we put forward a roadmap for achieving the aim of constructing the first artificial, autonomously running protein motor. Specifically, we propose to break down the task into (i) enzymatic control of track binding, (ii) the engineering of asymmetry and (iii) the engineering of allosteric control for internal communication. We also propose specific approaches for solving each of these challenges. [ABSTRACT FROM AUTHOR]

Processive endoglucanase EG1 and its core domain, EG1(CD), were used to pretreat the commercial dissolving pulp to improve cellulose reactivity. The Fock reactivity of the pulp which was treated with EG1 and EG1 (CD) at 50 U/g enzyme loading increased from 74.3% of the control to 90.6% and 88.4%, respectively. Refining also improved the Fock reactivity of the pulp, but not as effective as EG1 or EG1(CD) treatment. Refining prior to EG1 or EG1(CD) treatment could slightly further improve the Fock reactivity, to 91.6% and 90.0%, respectively. After enzymatic treatment and (or) refining, the water retention value, differential scanning calorimetry and alkaline solubility analysis indicated that enzyme treatment, especially by EG1, significantly increased the accessibility of fibers to reaction reagents. Combined with the characteristics of soluble reducing sugar produced by EG1 treatment and the changes of degree of polymerization, it is inferred that a small fraction of cellulose crystallization regions are destroyed in the enzymatic hydrolysis process due to the processive acting ability of EG1, and some microchannels in the fiber cell wall were created, which is similar to the effect of "drilling holes", so that the reaction reagent can reach the inside of the cell wall evenly, thus obviously improving the reactivity of the dissolved pulp. [ABSTRACT FROM AUTHOR]

Measles virus (MeV), like all viruses of the order Mononegavirales, utilizes a complex consisting of genomic RNA, nucleoprotein, the RNA-dependent RNA polymerase and a polymerase co-factor, the phosphoprotein (P), for transcription and replication. We previously showed that a recombinant MeV that does not express another viral protein, C, has severe transcription and replication deficiencies, including a steeper transcription gradient compared to parental virus and generation of defective-interfering RNA. This virus is attenuated in vitro and in vivo. However, how the molecular mechanism by which C protein operates and whether it is a structural component of the replication complex remained unclear. Here we show that C associates with the ribonucleocapsid and forms a complex that can be purified by immunoprecipitation or ultracentrifugation. In the presence of detergent, the C protein is retained on purified ribonucleocapsids less efficiently than the P protein and the polymerase. The C protein is recruited to the ribonucleocapsid through its interaction with the P protein, as shown by immunofluorescence microscopy of cells expressing different combinations of viral proteins and split luciferase complementation assays. Forty amino-terminal C protein residues are dispensable for the interaction with P, and the carboxyl-terminal half of P is sufficient for the interaction with C. Thus, the C protein, rather than being accessory as qualified in textbooks so far, is a ribonucleocapsid-associated protein that interacts with P, thereby increasing replication accuracy and processivity of the polymerase complex. [ABSTRACT FROM AUTHOR]

Cellulases, as environmentally appropriate catalysts specifically acting on cellulosic substrates, are important for the industrial conversion of lignocellulose and modification of cellulose products. After decades of research, a fundamental understanding of cellulase-mediated hydrolysis of cellulose is that its ability to processively act as a key for the complete enzymatic hydrolysis of natural crystalline cellulose. Two types of processive cellulases are known: exoglucanases and processive endoglucanases. Exoglucanases are typical processive enzymes, and they have been studied in detail so that their modes of action and mechanisms are reasonably well characterized. Conversely, endoglucanases are less well characterized because of the non-universality and structural diversity. However, processive endoglucanases have certain characteristics that exoglucanases lack such as hydrolysis product diversity and independent hydrolyze natural crystalline cellulose. Therefore, besides the conversion of cellulose to monosaccharide, they might be useful for modification of fibrous substrates and preparation of cellulose oligosaccharides. Herein, we review in detail the sources, hydrolysis products, application, and possible hydrolysis mechanisms of processive endoglucanases. [ABSTRACT FROM AUTHOR]

DNA methylation controls gene expression, and once established, DNA methylation patterns are faithfully copied during DNA replication by the maintenance DNA methyltransferase Dnmt1. In vivo, Dnmt1 interacts with Uhrf1, which recognizes hemimethylated CpGs. Recently, we reported that Uhrf1‐catalyzed K18‐ and K23‐ubiquitinated histone H3 binds to the N‐terminal region (the replication focus targeting sequence, RFTS) of Dnmt1 to stimulate its methyltransferase activity. However, it is not yet fully understood how ubiquitinated histone H3 stimulates Dnmt1 activity. Here, we show that monoubiquitinated histone H3 stimulates Dnmt1 activity toward DNA with multiple hemimethylated CpGs but not toward DNA with only a single hemimethylated CpG, suggesting an influence of ubiquitination on the processivity of Dnmt1. The Dnmt1 activity stimulated by monoubiquitinated histone H3 was additively enhanced by the Uhrf1 SRA domain, which also binds to RFTS. Thus, Dnmt1 activity is regulated by catalysis (ubiquitination)‐dependent and ‐independent functions of Uhrf1. [ABSTRACT FROM AUTHOR]

In nature, recalcitrant polysaccharides such as chitin and cellulose are degraded by glycoside hydrolases (GH) that act synergistically through different modes of action including attack from reducing-end and nonreducing-end (exo-mode) and random (endo-mode) on single polysaccharide chains. Both modes can be combined with a processive mechanism where the GH remain bound to the polysaccharide to perform multiple catalytic steps before dissociation into the solution. In this work, we have determined association rate constants and their activation paramaters for three co-evolved GHs from Serratia marcescens (Sm ChiA, Sm ChiB, and Sm ChiC) with an oligomeric substrate. Interestingly, we observe a positive correlation between the association rate constants and processive ability for the GHs. Previously, a positive correlation has been observed between substrate binding affinity and processive ability. Sm ChiA with highest processive ability of the three GHs bind with a k on of 11.5 ± 0.2 μM−1s−1, which is five-fold and 130-fold faster than Sm ChiB (less processive) and Sm ChiC (nonprocessive), respectively. • Positive correlation between association rate and GH processive ability. • Binding substrate to aromatic amino acids in GHs lowers the activation enthalpy. • Activation enthalpy is the key for the rate of substrate binding. [ABSTRACT FROM AUTHOR]

Glycoside hydrolases (GHs) bind carbohydrates to convert polysaccharides into soluble sugars. GH binding sites are lined with aromatic and polar residues that facilitate function. The role of polar residues in GH function, relative to aromats, is often less straightforward. Using molecular dynamics simulation, thermodynamic integration and umbrella sampling molecular dynamics free energy calculations, and biochemical assays, we examined how Asp-316, Tyr-145, Arg-294, and Glu-221 aid in substrate binding, activity, and processive ability of a GH family 18 bacterial chitinase, Serratia marcescens chitinase B (ChiB). Despite what appears to be a 'roof' between Asp-316 and Trp-97 over the substrate in crystal structures, our results indicated 'roof' formation was not thermodynamically favourable. Asp-316 appeared to be supportive, providing interactions aiding in ligand stability at the −2 and −3 product sites. Mutation of Tyr-145 to alanine inactivated the enzyme; simulations revealed Tyr-145 stabilised the binding cleft strand containing the catalytic motif. Arg-294 appeared to play several roles, both stabilising Asp-215 and the +1 pyranose and forcing Trp-220 to stack with the +2 pyranose. Arg-294 may even modulate active site pKa. Glu-221 hydrogen bonded with the +3 pyranose and appeared to stabilise the adjacent carbohydrate-π stacking between Phe-190 and the +3 pyranose. [ABSTRACT FROM AUTHOR]

Processive movement is the key reaction for crystalline polymer degradation by enzyme. Product release is an important phenomenon in resetting the moving cycle, but how it affects chitinase kinetics was unknown. Therefore, we investigated the effect of diacetyl chitobiose (C2) on the biochemical activity and movement of chitinase A from Serratia marcescens (SmChiA). The apparent inhibition constant of C2 on crystalline chitin degradation of SmChiA was 159 μM. The binding position of C2 obtained by X-ray crystallography was at subsite +1, +2 and Trp275 interact with C2 at subsite +1. This binding state is consistent with the competitive inhibition obtained by biochemical analysis. The apparent inhibition constant of C2 on the moving velocity of high-speed (HS) AFM observations was 330 μM, which is close to the biochemical results, indicating that the main factor in crystalline chitin degradation is also the decrease in degradation activity due to inhibition of processive movement. The Trp275 is a key residue for making a sliding intermediate complex. SmChiA W275A showed weaker activity and affinity than WT against crystalline chitin because it is less processive than WT. In addition, biochemical apparent inhibition constant for C2 of SmChiA W275A was 45.6 μM. W275A mutant showed stronger C2 inhibition than WT even though the C2 binding affinity is weaker than WT. This result indicated that Trp275 is important for the interaction at subsite +1, but also important for making sliding intermediate complex and physically block the rebinding of C2 on the catalytic site for crystalline chitin degradation. [Display omitted] • Moving velocity of processive chitinase is reduced by high concentration of product. • Tryptophan increases the activity to chitin crystal and reduce product inhibition. • Conformation change of substrate blocks rebinding of product to bias the reaction. [ABSTRACT FROM AUTHOR]

Abstract Background Filamentous fungi are among the most powerful cellulolytic organisms in terrestrial ecosystems. To perform the degradation of lignocellulosic substrates, these microorganisms employ both hydrolytic and oxidative mechanisms that involve the secretion and synergism of a wide variety of enzymes. Interactions between these enzymes occur on the level of saccharification, i.e., the release of neutral and oxidized products, but sometimes also reflected in the substrate liquefaction. Although the synergism regarding the yield of neutral sugars has been extensively studied, further studies should focus on the oxidized sugars, as well as the effect of enzyme combinations on the viscosity properties of the substrates. Results In the present study, the heterologous expression of an endoglucanase (EG) and its combined activity together with a lytic polysaccharide monooxygenase (LPMO), both from the thermophilic fungus Myceliophthora thermophila, are described. The EG gene, belonging to the glycoside hydrolase family 5, was functionally expressed in the methylotrophic yeast Pichia pastoris. The produced MtEG5A (75 kDa) featured remarkable thermal stability and showed high specific activity on microcrystalline cellulose compared to CMC, which is indicative of its processivity properties. The enzyme was capable of releasing high amounts of cellobiose from wheat straw, birch, and spruce biomass. Addition of MtLPMO9 together with MtEG5A showed enhanced enzymatic hydrolysis yields against regenerated amorphous cellulose (PASC) by improving the release not only of the neutral but also of the oxidized sugars. Assessment of activity of MtEG5A on the reduction of viscosity of PASC and pretreated wheat straw using dynamic viscosity measurements revealed that the enzyme is able to perform liquefaction of the model substrate and the natural lignocellulosic material, while when added together with MtLPMO9, no further synergistic effect was observed. Conclusions The endoglucanase MtEG5A from the thermophilic fungus M. thermophila exhibited excellent properties that render it a suitable candidate for use in biotechnological applications. Its strong synergism with LPMO was reflected in sugars release, but not in substrate viscosity reduction. Based on the level of oxidative sugar formation, this is the first indication of synergy between LPMO and EG reported.

The gamma-glutamyl carboxylase (GGCX) generates clusters of carboxylated glutamic acid residues in vitamin K-dependent (VKD) proteins, which is required for their diverse functions including hemostasis and regulation of calcification. The GGCX modifies a VKD protein using several substrates and cofactors, and has regulatory mechanisms like processivity that ensures full carboxylation of VKD proteins. The GGCX mechanism is incompletely understood. GGCX mutations cause disease: vitamin K clotting factor deficiency (VKCFD1) associated with severe bleeding and pseudoxanthoma elasticum (PXE)-like, where bleeding is mild but calcification is excessive. Why mutations cause disease has only been revealed for a few GGCX mutants. The chapter describes biochemical and cellular assays developed to define GGCX mechanism and determine why GGCX mutations cause disease. Multiple components are important to VKD protein carboxylation. GGCX requires reduced vitamin K generated by the vitamin K epoxide reductase (VKORC1), which is activated by redox protein(s). GGCX activity is also supported by the reductases VKORC1-like and ferroptosis suppressor protein-1 (FSP1). Carboxylation occurs in the endoplasmic reticulum during VKD protein secretion and is impacted by quality control mechanisms. This chapter emphasizes the importance in maintaining an appropriate stoichiometry of the components when studying recombinant (r-) r-GGCX function in cells. Also emphasized is the essentiality in using both cellular and biochemical approaches to study r-GGCX function, as cellular analysis can detect altered VKD protein carboxylation by r-GGCX mutants but cannot explain the r-GGCX defects. This point is illustrated by studies on a GGCX mutant that causes the PXE-like disease, where biochemical analysis was necessary for revealing mutant dysfunction, i.e. impaired processivity., (Copyright © 2024. Published by Elsevier Inc.)

Introduction: Moloney Murine Leukemia Virus Reverse Transcriptase (MMLV RT) is a common enzyme used to convert RNA sequences into cDNA. However, it still has its shortcomings, especially in terms of processivity and thermostability. According to a previous patent, the fusion of polymerase enzyme to an archaeal DNA-binding protein has been proven to enhance its performance. Furthermore, recent studies have also stated that the fusion of a polymerase enzyme to an archaeal DNA-binding protein is predicted to improve its thermostability and processivity., Aim: As an early stage of enzyme development, this study aimed to design, express, and purify enzymatically active MMLV RT fused with archaeal DNA-binding protein., Methods: RT fusion proteins were designed and evaluated using in silico methods. The RT fusion enzyme was then expressed in Escherichia coli BL21(DE3) and purified. Its reverse transcriptional activity was proved using reverse transcription quantitative polymerase chain reaction (RT-qPCR)., Results: This study showed that MMLV RT fusion with Sis7a protein at its C-terminal end using commercial linker (GGVDMI) produced the best in silico evaluation results. The RT fusion was successfully expressed and purified. It was also known that the optimal condition for expression of the RT fusion was using 0.5 mM IPTG with post-induction incubation at room temperature (± 26°C) for 16 hours. In addition, the activity assay proved that the RT fusion has the reverse transcriptional activity., Conclusion: This study shows that the designed MMLV RT Sis7a fusion can be expressed and purified, is enzymatically active, and has the potential to be developed as an improved RT enzyme. Further study is still needed to prove its thermostability and processivity, and further characterize, and plan production scale-up of the MMLV RT Sis7a fusion for commercial use., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Conventional kinesin, a dimeric molecular motor, uses ATP-dependent conformational changes to move unidirectionally along a row of tubulin subunits on a microtubule. Two models have been advanced for the major structural change underlying kinesin motility: the first involves an unzippering/zippering of a small peptide (neck linker) from the motor catalytic core and the second proposes an unwinding/rewinding of the adjacent coiled-coil (neck coiled-coil). Here, we have tested these models using disulfide cross-linking of cysteines engineered into recombinant kinesin motors. When the neck linker motion was prevented by cross-linking, kinesin ceased unidirectional movement and only showed brief one-dimensional diffusion along microtubules. Motility fully recovered upon adding reducing agents to reverse the cross-link. When the neck linker motion was partially restrained, single kinesin motors showed biased diffusion towards the microtubule plus end but could not move effectively against a load imposed by an optical trap. Thus, partial movement of the neck linker suffices for directionality but not for normal processivity or force generation. In contrast, preventing neck coiled-coil unwinding by disulfide cross-linking had relatively little effect on motor activity, although the average run length of single kinesin molecules decreased by 30-50%. These studies indicate that conformational changes in the neck linker, not in the neck coiled-coil, drive processive movement by the kinesin motor.

Conventional kinesin is a highly processive molecular motor that takes several hundred steps per encounter with a microtubule. Processive motility is believed to result from the coordinated, hand-over-hand motion of the two heads of the kinesin dimer, but the specific factors that determine kinesin's run length (distance traveled per microtubule encounter) are not known. Here, we show that the neck coiled-coil, a structure adjacent to the motor domain, plays an important role in governing the run length. By adding positive charge to the neck coiled-coil, we have created ultra-processive kinesin mutants that have fourfold longer run lengths than the wild-type motor, but that have normal ATPase activity and motor velocity. Conversely, adding negative charge on the neck coiled-coil decreases the run length. The gain in processivity can be suppressed by either proteolytic cleavage of tubulin's negatively charged COOH terminus or by high salt concentrations. Therefore, modulation of processivity by the neck coiled-coil appears to involve an electrostatic tethering interaction with the COOH terminus of tubulin. The ability to readily increase kinesin processivity by mutation, taken together with the strong sequence conservation of the neck coiled-coil, suggests that evolutionary pressures may limit kinesin's run length to optimize its in vivo function.