Search

Bioplastics, comprised of bio‐based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end‐of‐life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high‐quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction. [ABSTRACT FROM AUTHOR]

The article discusses the recycling of plastic wastes in Europe which can be used as a novel second generation carbon source for microbial biotechnology. Topics mentioned include the thermochemical depolymerization of plastics, the use plastic wastes as feedstock and the waste plastic products. The authors proposed plastic upcycling through biotechnology in converting plastic waste into plastic value workflow.

Background: Microbially produced bioplastics are specially promising materials since they can be naturally synthesized and degraded, making its end-of-life management more amenable to the environment. A prominent example of these new materials are polyhydroxyalkanoates. These polyesters serve manly as carbon and energy storage and increase the resistance to stress. Their synthesis can also work as an electron sink for the regeneration of oxidized cofactors. In terms of biotechnological applications, the co-polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), or PHBV, has interesting biotechnological properties due to its lower stiffness and fragility compared to the homopolymer poly(3-hydroxybutyrate) (P3HB). In this work, we explored the potentiality of Rhodospirillum rubrum as a producer of this co-polymer, exploiting its metabolic versatility when grown in different aeration conditions and photoheterotrophically. Results: When shaken flasks experiments were carried out with limited aeration using fructose as carbon source, PHBV production was triggered reaching 29 ± 2% CDW of polymer accumulation with a 75 ± 1%mol of 3-hydroxyvalerate (3HV) (condition C2). Propionate and acetate were secreted in this condition. The synthesis of PHBV was exclusively carried out by the PHA synthase PhaC2. Interestingly, transcription of cbbM coding RuBisCO, the key enzyme of the Calvin-Benson-Bassham cycle, was similar in aerobic and microaerobic/anaerobic cultures. The maximal PHBV yield (81% CDW with 86%mol 3HV) was achieved when cells were transferred from aerobic to anaerobic conditions and controlling the CO2 concentration by adding bicarbonate to the culture. In these conditions, the cells behaved like resting cells, since polymer accumulation prevailed over residual biomass formation. In the absence of bicarbonate, cells could not adapt to an anaerobic environment in the studied lapse. Conclusions: We found that two-phase growth (aerobic-anaerobic) significantly improved the previous report of PHBV production in purple nonsulfur bacteria, maximizing the polymer accumulation at the expense of other components of the biomass. The presence of CO2 is key in this process demonstrating the involvement of the Calvin-Benson-Bassham in the adaptation to changes in oxygen availability. These results stand R. rubrum as a promising producer of high-3HV-content PHBV co-polymer from fructose, a PHBV unrelated carbon source. [ABSTRACT FROM AUTHOR]

Environmental concerns about residues and the traditional disposal methods are driving the search for more environmentally conscious processes, such as pyrolysis and gasification. Their main final product is synthesis gas (syngas) composed of CO, CO2, H2, and methane. Syngas can be converted into various products using CO-tolerant microorganisms. Among them, Rhodospirillum rubrum is highlighted for its biotechnological potential. However, the extent to which high doses of CO affect its physiology is still opaque. For this reason, we have studied R. rubrum behavior under high levels of this gas (up to 2.5 bar), revealing a profound dependence on the presence or absence of light. In darkness, the key variable affected was the lag phase, where the highest levels of CO retarded growth to more than 20 days. Under light, R. rubrum ability to convert CO into CO2 and H2 depended on the presence of an additional carbon source, such as acetate. In those conditions where CO was completely exhausted, CO2 fixation was unblocked, leading to a diauxic growth. To enhance R. rubrum tolerance to CO in darkness, a UV-accelerated adaptive laboratory evolution (UVa-ALE) trial was conducted to isolate clones with shorter lag phases, resulting in the isolation of clones 1.4-2B and 1.7-2A. The adaptation of 1.4-2B was mainly based on mutated enzymes with a metabolic function, while 1.7-3A was mostly affected at regulatory genes, including the anti-repressor PpaA/AerR. Despite these mutations having slight effects on biomass and pigment levels, they successfully provoked a significant reduction in the lag phase (−50%). Keypoints: • CO affects principally R. rubrum lag phase (darkness) and growth rate (light) • CO is converted to CO2/H2during acetate uptake and inhibits CO2fixation (light) • UVa-ALE clones showed a 50% reduction in the lag phase (darkness) [ABSTRACT FROM AUTHOR]

Environmental concerns about residues and the traditional disposal methods are driving the search for more environmentally conscious processes, such as pyrolysis and gasification. Their main final product is synthesis gas (syngas) composed of CO, CO2, H2, and methane. Syngas can be converted into various products using CO-tolerant microorganisms. Among them, Rhodospirillum rubrum is highlighted for its biotechnological potential. However, the extent to which high doses of CO affect its physiology is still opaque. For this reason, we have studied R. rubrum behavior under high levels of this gas (up to 2.5 bar), revealing a profound dependence on the presence or absence of light. In darkness, the key variable affected was the lag phase, where the highest levels of CO retarded growth to more than 20 days. Under light, R. rubrum ability to convert CO into CO2 and H2 depended on the presence of an additional carbon source, such as acetate. In those conditions where CO was completely exhausted, CO2 fixation was unblocked, leading to a diauxic growth. To enhance R. rubrum tolerance to CO in darkness, a UV-accelerated adaptive laboratory evolution (UVa-ALE) trial was conducted to isolate clones with shorter lag phases, resulting in the isolation of clones 1.4-2B and 1.7-2A. The adaptation of 1.4-2B was mainly based on mutated enzymes with a metabolic function, while 1.7-3A was mostly affected at regulatory genes, including the anti-repressor PpaA/AerR. Despite these mutations having slight effects on biomass and pigment levels, they successfully provoked a significant reduction in the lag phase (−50%). Keypoints: • CO affects principally R. rubrum lag phase (darkness) and growth rate (light) • CO is converted to CO2/H2during acetate uptake and inhibits CO2fixation (light) • UVa-ALE clones showed a 50% reduction in the lag phase (darkness) [ABSTRACT FROM AUTHOR]

Summary: Over the past few decades, considerable interest has been shown in developing nano‐ and microcarriers with biocompatible and biodegradable materials for medical and biotechnological applications. Microencapsulation is a technology capable of enhancing the survival rate of bacteria, providing stability in harsh environments. In the present paper, we developed a technology to encapsulate microorganisms within polyhydroxyalkanoate (PHA)‐based microcapsules (MPs), employing a modified double emulsion solvent evaporation technique, with Pseudomonas putida KT2440 as a biotechnological model strain. The resulting MPs display a spherical morphology and an average particle size of 10 μm. The stability of the MPs was monitored under different conditions of storage and stress. The MPs remained stable for at least 24 days stored at 4°C in a water suspension. They exhibited greater tolerance to stress conditions; encapsulated cells remained viable for 2 h in alkaline solution and after 24 h of H2O2 exposure at 10 and 20 mM. Results suggested the potential of MPs as a microcontainer of bacterial cells, even for biotechnological applications requiring high alkaline conditions and oxidative stress. We validated the potential applicability of the PHA‐based microencapsulation method in other microorganisms by encapsulating the predatory bacterium Bdellovibrio bacteriovorus. [ABSTRACT FROM AUTHOR]

Synergistic methodological strategies based on the fields of microbial biotechnology and materials science open up an enormous range of possibilities for the sustainable production of advanced materials with predictable properties. This study shows how naturally produced polyhydroxyalkanoate (PHA) particles are introduced into bacterial cellulose (BC) driven by their bacterial producers. Thanks to an extensive knowledge of the internal structure of BC, it was possible to control the colonization process, i.e. loading and localization of PHA. A subsequent acid treatment favored the PHA-BC bonding at the position reached by the bacteria. These biodegradable films showed improved mechanical and barrier properties even with respect to reference plastic films 8 times thicker, reaching a Young's modulus 4.25 times higher and an oxygen permeability 3 times lower than those of polyethylene terephthalate (PET) films. Owing to the versatility of the method, a wide variety of materials can be developed for very diverse fields of application. [Display omitted] • PHA particles are introduced into BC driven by their bacterial producers. • The colonization process was controlled, i.e. loading and localization of PHA. • PHA-BC bonding was stabilized by hydrogen bonding in the position reached by bacteria. • Films showed 3 times better barrier properties than 8 times thicker PET films. • The high versatility of this method allows the customization of film properties. [ABSTRACT FROM AUTHOR]

Phytic acid (PA) is an abundant natural plant component that exhibits a versatility of applications benefited from its chemical structure, standing out its use as food, packing and dental additive due to its antimicrobial properties. The capacity of PA to chelate ions is also well-established and the formation and thermodynamic properties of different metallic complexes has been described. However, research studies of these compounds in terms of chemistry and biological features are still demanded in order to extend the application scope of PA complexes. The main goal of this paper is to deepen in the knowledge of the bioactive metal complexes chemistry and their bactericide activity, to extend their application in biomaterial science, specifically in oral implantology. Thus, this work presents the synthesis and structural assessment of two metallic phytate complexes bearing the bioactive cations Zn2+ and Sr2+ (ZnPhy and SrPhy respectively), along with studies on the synergic biological properties between PA and cations. Metallic phytates were synthesized in the solid-state by hydrothermal reaction leading to pure solid compounds in high yields. Their molecular formulas were C6H12024P6Sr4·5H2O and C6H12024P6Zn6·6H2O, as determined by ICP and HRES-TGA. The metal coordination bond of the solid complexes was further analysed by EDS, Raman, ATR-FTIR and solid 13C and 31P-NMR spectroscopies. Likewise, we evaluated the in vitro ability of the phytate compounds for inhibiting biofilm production of Streptococcus mutans cultures. Results indicate that all compounds significantly reduced biofilm formation (PA < SrPhy < ZnPhy), and ZnPhy even showed remarkable differences with respect to PA and SrPhy. Analysis of antimicrobial properties shows the first clues of the possible synergic effects created between PA and the corresponding cation in different cell metabolic processes. In overall, findings of this work can contribute to expand the applications of these bioactive metallic complexes in the biotechnological and biomedical fields, and they can be considered for the fabrication of anti-plaque coating systems in the dentistry field. [ABSTRACT FROM AUTHOR]

This work aimed to evaluate the predatory activity of Bdellovibrio bacteriovorus 109J on clinical isolates of Pseudomonas aeruginosa selected from well-characterized collections of cystic fibrosis (CF) lung colonization (n = 30) and bloodstream infections (BSI) (n = 48) including strains selected by genetic lineage (frequent and rare sequence types), antibiotic resistance phenotype (susceptible and multidrug-resistant isolates), and colony phenotype (mucoid and non-mucoid isolates). The intraspecies predation range (I-PR) was defined as the proportion of susceptible strains within the entire collection. In contrast, the predation efficiency (PE) is the ratio of viable prey cells remaining after predation compared to the initial inoculum. I-PR was significantly higher for CF (67%) than for BSI P. aeruginosa isolates (35%) probably related to an environmental origin of CF strains whereas invasive strains are more adapted to humans. I-PR correlation with bacterial features such as mucoid morphotype, genetic background, or antibiotic susceptibility profile was not detected. To test the possibility of increasing I-PR of BSI isolates, a polyhydroxyalkanoate depolymerase deficient B. bacteriovorus bd2637 mutant was used. Global median I-PR and PE values remained constant for both predators, but 31.2% of 109J-resistant isolates were susceptible to the mutant, and 22.9% of 109J-susceptible isolates showed resistance to predation by the mutant, pointing to a predator–prey specificity process. The potential use of predators in the clinical setting should be based on the determination of the I-PR for each species, and the PE of each particular target strain. [ABSTRACT FROM AUTHOR]

Summary: Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non‐native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next‐generation‐advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self‐repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom‐up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs. [ABSTRACT FROM AUTHOR]

• C. necator H16 produces P(3HB)/PLA (40/60) using a lactate-enriched fermented wastewater from a candy industry. • Lactate content in P(3HB)/PLA can be tailored in a defined medium using C. necator H16 resting cells. • Proteomic analysis provides new insights into P(3HB)/PLA production by native enzymes in C. necator H16. The massive production of urban and industrial wastes has created a clear need for alternative waste management processes. One of the more promising strategies is to use waste as raw material for the production of biopolymers such as polyhydroxyalkanoates (PHAs). In this work, a lactate-enriched stream obtained by anaerobic digestion (AD) of wastewater (WW) from a candy production plant was used as a feedstock for PHA production in wild-type Cupriavidus necator H16. Unexpectedly, we observed the accumulation of poly(3-hydroxybutyrate)/poly(lactic acid) (P(3HB)/PLA), suggesting that the non-engineered strain already possesses the metabolic potential to produce these polymers of interest. The systematic study of factors, such as incubation time, nitrogen and lactate concentration, influencing the synthesis of P(3HB)/PLA allowed the production of a panel of polymers in a resting cell system with tailored lactic acid (LA) content according to the GC–MS of the biomass. Further biomass extraction suggested the presence of methanol soluble low molecular weight molecules containing LA, while 1 % LA could be detected in the purified polymer fraction. These results suggested that the cells are producing a blend of polymers. A proteomic analysis of C. necator resting cells under P(3HB)/PLA production conditions provides new insights into the latent pathways involved in this process. This study is a proof of concept demonstrating that LA can polymerize in a non-modified organism and paves the way for new metabolic engineering approaches for lactic acid polymer production in the model bacterium C. necator H16. [Display omitted] [ABSTRACT FROM AUTHOR]

Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery. [ABSTRACT FROM AUTHOR]

Biodegradable polyesters, such as polyhydroxyalkanoates (PHAs), are having a tremendous impact on biomedicine. However, these polymers lack functional moieties to impart functions like targeted delivery of molecules. Inspired by native GAPs, such as phasins and their polymer-binding and surfactant properties, we generated small material binding peptides (MBPs) for polyester surface functionalization using a rational approach based on amphiphilicity. Here, two peptides of 48 amino acids derived from phasins PhaF and PhaI from Pseudomonas putida , MinP and the novel-designed MinI, were assessed for their binding towards two types of PHAs, PHB and PHOH. In vivo, fluorescence studies revealed selective binding towards PHOH, whilst in vitro binding experiments using the Langmuir-Blodgett technique coupled to ellipsometry showed K D in the range of nM for all polymers and MBPs. Marked morphological changes of the polymer surface upon peptide adsorption were shown by BAM and AFM for PHOH. Moreover, both MBPs were successfully used to immobilize cargo proteins on the polymer surfaces. Altogether, this work shows that by redesigning the amphiphilicity of phasins, a high affinity but lower specificity to polyesters can be achieved in vitro. Furthermore, the MBPs demonstrated binding to PET, showing potential to bind cargo molecules also to synthetic polyesters. [ABSTRACT FROM AUTHOR]

Biodegradable polyesters, such as polyhydroxyalkanoates (PHAs), are having a tremendous impact on biomedicine. However, these polymers lack functional moieties to impart functions like targeted delivery of molecules. Inspired by native GAPs, such as phasins and their polymer-binding and surfactant properties, we generated small material binding peptides (MBPs) for polyester surface functionalization using a rational approach based on amphiphilicity. Here, two peptides of 48 amino acids derived from phasins PhaF and PhaI from Pseudomonas putida , MinP and the novel-designed MinI, were assessed for their binding towards two types of PHAs, PHB and PHOH. In vivo, fluorescence studies revealed selective binding towards PHOH, whilst in vitro binding experiments using the Langmuir-Blodgett technique coupled to ellipsometry showed K D in the range of nM for all polymers and MBPs. Marked morphological changes of the polymer surface upon peptide adsorption were shown by BAM and AFM for PHOH. Moreover, both MBPs were successfully used to immobilize cargo proteins on the polymer surfaces. Altogether, this work shows that by redesigning the amphiphilicity of phasins, a high affinity but lower specificity to polyesters can be achieved in vitro. Furthermore, the MBPs demonstrated binding to PET, showing potential to bind cargo molecules also to synthetic polyesters. [ABSTRACT FROM AUTHOR]

Summary: Phasin PhaF, a multifunctional protein associated with the surface of polyhydroxyalkanoate (PHA) granules that also interacts with the nucleoid, contributes significantly to PHA biogenesis in pseudomonads. As a protein present on the surface of PHA granules, PhaF participates in granule stabilization and segregation, whereas its deletion has a notable impact on overall transcriptome, PHA accumulation and cell physiology, suggesting more extensive functions besides solely being a granule structural protein. Here, we followed a systematic approach to detect potential interactions of PhaF with other components of the cell, which could pinpoint unexplored functions of PhaF in the regulation of PHA production. We determined the PhaF interactome in Pseudomonas putida KT2440 via pull‐down‐mass spectrometry (PD‐MS) experiments. PhaF complexed with PHA‐related proteins, phasin PhaI and the transcriptional regulator PhaD, interactions that were verified to be direct using in vivo two‐hybrid analysis. The determination of the PHA granule proteome showed that PhaI and three other potential PhaF interacting partners, but not PhaD, were granule‐associated proteins. Analysis of the interaction of PhaF and PhaD with the phaI promoter by EMSA suggested a new role for PhaF in interacting with PhaD and raises new questions on the regulatory system controlling pha gene expression. [ABSTRACT FROM AUTHOR]

Phasin PhaF from Pseudomonas putida consists of a modular protein whose N-terminal domain (BioF) has been demonstrated to be responsible for binding to the polyhydroxyalkanoate (PHA) granule. BioF has been exploited for biotechnological purposes as an affinity tag in the functionalization of PHA beads with fusion proteins both in vivo and in vitro. The structural model of this domain suggests an amphipathic α-helical conformation with the hydrophobic residues facing the PHA granule. In this work, we analyzed the mean hydrophobicity and the hydrophobic moment of the native BioF tag to rationally design shorter versions that maintain affinity for the granule. Hybrid proteins containing the green fluorescent protein (GFP) fused to the BioF derivatives were studied for in vivo localization on PHA, stability on the surface of the PHA granule against pH, temperature, and ionic strength, and their possible influence on PHA synthesis. Based on the results obtained, a minimized BioF tag for PHA functionalization has been proposed (MinP) that retains similar binding properties but possesses an attractive biotechnological potential derived from its reduced size. The MinP tag was further validated by analyzing the functionality and stability of the fusion proteins MinP--β-galactosidase and MinP-CueO from Escherichia coli. [ABSTRACT FROM AUTHOR]

Abstract Background Phasins are low molecular mass proteins that accumulate strongly in bacterial cells in response to the intracellular storage of polyhydroxyalkanoates (PHA). Although lacking catalytic activity, phasins are the major components of the surface of the PHA granules and could be potentially involved in the formation of a network-like protein layer surrounding the polyester inclusions. Structural models revealed phasins to possess coiled-coil regions that might be important in the establishment of protein-protein interactions. However, there is not experimental evidence of a coiled-coil mediated oligomerization in these proteins. Methods Structure prediction analyses were used to characterize the coiled-coil motifs of phasins PhaF and PhaI –produced by the model bacterium Pseudomonas putida KT2440–. Their oligomerization was evaluated by biolayer interferometry and the in vivo two-hybrid (BACTH) system. The interaction ability of a series of coiled-coil mutated derivatives was also measured. Results The formation of PhaF and PhaI complexes was detected. A predicted short leucine zipper-like coiled-coil (ZIP), containing "ideal" residues located within the hydrophobic core, was shown responsible for the oligomers stability. The substitution of key residues (leucines or valines) in PhaI ZIP (ZIPI) for alanine reduced by four fold the oligomerization efficiency. Conclusions These results indicate that coiled-coil motifs are essential for phasin interactions. Correct oligomerization requires the formation of a stable hydrophobic interface between both phasins. General Significance. Our findings elucidate the oligomerization motif of PhaF and PhaI. This motif is present in most phasins from PHA-accumulating bacteria and offers a potentially important target for modulating the PHA granules stability. Graphical abstract Unlabelled Image Highlights • Phasin oligomerization in a polyhydroxyalkanoate-producing bacterium was verified • Phasins formed complexes mediated by short leucine zipper-like motifs • Critical hydrophobic amino acids were responsible for coiled-coil oligomerization [ABSTRACT FROM AUTHOR]

[Display omitted] • Titanium surfaces were functionalized with metallic phytate compounds (strontium and zinc phytates) via the formation of self-assembled monolayers (SAMs) promoted by casting evaporation. • Physicochemical features of phytate SAMs were determined through EDS, XPS, SEM, AFM, profilometry and contact angle measurements. • Osteoblasts cells were properly adhered and spread over modified surfaces after 1 day, and the proliferation rate increased during 14 days of incubation. • The quantification of ALP/DNA activity suggested evidence of synergic biological effects between cations and phytate moiety, and all phytate-based surfaces enabled a significant enhancement in matrix mineralization degree regarding the control group. • All phytate-containing surfaces exhibited adequate anti-biofilm properties against S. mutans cultures. The accumulation of bacteria over implant surfaces is still the first cause of failure, and the development of antimicrobial surfaces constitutes a first line in implant research. Besides, the durability and mechanical performance of implants, in special in the dental area, are mainly determined by their osseointegration capacity into the maxillofacial bone and the appearance of infections. Consequently, implant osseointegration and infection prophylaxis remain as big challenges to attain so a huge investigation is being developed on the production of bioactive surfaces to achieve improvements in these aspects. In this work we propose the functionalization of titanium surfaces (Ti Cp) with self-assembled monolayers (SAMs) of bioactive organophosphate compounds: phytic acid (Ti-PA) and its metallic phytate derivatives bearing Sr2+ and/or Zn2+ (Ti-SrPhy, Ti-ZnPhy and Ti-SrPhy/ZnPhy) which exhibited tunable in vitro osteogenic, antimicrobial and antioxidant properties in a previous work. Thus, phytate compounds are chemically anchored onto Ti discs through a simple procedure consisting of a condensation reaction promoted by heat treatment. EDS and XPS spectroscopies confirm the obtaining of the modified surfaces and the topographic properties and wettability analysed by SEM, AFM, profilometry and contact angle measurements, respectively, are explored. Additionally, phytate-SAMs do not release any cytotoxic compound after 14 days and stimulate in vitro adhesion and proliferation of human osteoblast cells after 14 days of culture. The osteogenic ability of the modified surfaces evaluated by the quantification of ALP activity and matrix mineralization degree shows a significant improvement with respect to unmodified surfaces. Furthermore, the antimicrobial activity of phytate-SAMs against Streptococcus mutans cultures is evaluated. The count of viable cells and the quantification of produced biofilm are significantly reduced by all phytate-SAMs groups (p < 0.001). Cell membrane integrity studies by LIVE/DEAD staining and SEM imaging confirm a decreased viability of adhered bacteria when phytate-based surfaces are tested, due to a disruption in the function and permeability of the cell membrane. Therefore, phytate-SAMs exhibit suitable in vitro features suggesting their promising potential as bioactive coatings of dental implants. [ABSTRACT FROM AUTHOR]

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters that accumulate in the cytoplasm of certain bacteria. One promising biotechnological application utilizes these biopolymers as supports for protein immobilization. Here, the PHA-binding domain of the Pseudomonas putida KT2440 PhaF phasin (BioF polypeptide) was investigated as an affinity tag for the in vitro functionalization of poly-3- hydroxybutyrate (PHB) particles with recombinant proteins, namely, full-length PhaF and two fusion proteins tagged to BioF (BioF-C-LytA and BioF-β-galactosidase, containing the choline-binding module C-LytA and the β-galactosidase enzyme, respectively). The protein-biopolyester interaction was strong and stable at a wide range of pHs and temperatures, and the bound protein was highly protected from selfdegradation, while the binding strength could be modulated by coating with amphiphilic compounds. Finally, BioF-β-galactosidase displayed very stable enzymatic activity after several continuous activity-plus-washing cycles when immobilized in a minibioreactor. Our results demonstrate the potentialities of PHA and the BioF tag for the construction of novel bioactive materials. [ABSTRACT FROM AUTHOR]

The massive production of urban and agricultural wastes has promoted a clear need for alternative processes of disposal and waste management. The potential use of municipal solid wastes ( MSW) as feedstock for the production of polyhydroxyalkanoates ( PHA) by a process known as syngas fermentation is considered herein as an attractive bio-economic strategy to reduce these wastes. In this work, we have evaluated the potential of Rhodospirillum rubrum as microbial cell factory for the synthesis of PHA from syngas produced by microwave pyrolysis of the MSW organic fraction from a European city (Seville). Growth rate, uptake rate, biomass yield and PHA production from syngas in R. rubrum have been analysed. The results revealed the strong robustness of this syngas fermentation where the purity of the syngas is not a critical constraint for PHA production. Microwave-induced pyrolysis is a tangible alternative to standard pyrolysis, because it can reduce cost in terms of energy and time as well as increase syngas production, providing a satisfactory PHA yield. [ABSTRACT FROM AUTHOR]

Human activity has been altering many ecological cycles for decades, disturbing the natural mechanisms which are responsible for re-establishing the normal environmental balances. Probably, the most disrupted of these cycles is the cycle of carbon. In this context, many technologies have been developed for an efficient CO2 removal from the atmosphere. Once captured, it could be stored in large geological formations and other reservoirs like oceans. This strategy could present some environmental and economic problems. Alternately, CO2 can be transformed into carbonates or different added-value products, such as biofuels and bioplastics, recycling CO2 from fossil fuel. Currently different methods are being studied in this field. We classified them into biological, inorganic and hybrid systems for CO2 transformation. To be environmentally compatible, they should be powered by renewable energy sources. Although hybrid systems are still incipient technologies, they have made great advances in the recent years. In this scenario, biotechnology is the spearhead of ambitious strategies to capture CO2 and reduce global warming. [ABSTRACT FROM AUTHOR]

In the same section, "A potential extracellular scl-PHA depolymerase coding sequence is found in the genome of I B. bacteriovorus i HD100 [open reading frame (ORF) Bd2637], adding to its hydrolytic arsenal SP 27,28,34 sp ." should read: "A potential extracellular scl-PHA depolymerase coding sequence is found in the genome of I B. bacteriovorus i [open reading frame (ORF) Bd2637], adding to its hydrolytic arsenal SP 27,28,34 sp ." Finally, in the Discussion, "The genome sequence of I B. bacteriovorus i HD100 SP 28 sp suggested that the vast amount of hydrolytic enzymes (biocatalysts) might be suitable for numerous industrial applications SP 27-29 sp ." should read: "The genome sequence of I B. bacteriovorus i SP 28 sp suggested that the vast amount of hydrolytic enzymes (biocatalysts) might be suitable for numerous industrial applications SP 27-29 sp ." and "Previous studies of I B. bacteriovorus i HD100 preying upon I P i . [Extracted from the article]

Phasins are proteins associated to intracellular polyhydroxyalkanoate granules that affect polymer accumulation and the number and size of the granules. Previous work demonstrated that a phasin from A zotobacter sp FA-8 ( PhaPAz) had an unexpected growth-promoting and stress-protecting effect in E scherichia coli, suggesting it could have chaperone-like activities. In this work, in vitro and in vivo experiments were performed in order to investigate this possibility. PhaPAz was shown to prevent in vitro thermal aggregation of the model protein citrate synthase and to facilitate the refolding process of this enzyme after chemical denaturation. Microscopy techniques were used to analyse the subcellular localization of PhaPAz in E . coli strains and to study the role of PhaPAz in in vivo protein folding and aggregation. PhaPAz was shown to colocalize with inclusion bodies of PD, a protein that aggregates when overexpressed. A reduction in the number of inclusion bodies of PD was observed when it was coexpressed with PhaPAz or with the known chaperone GroELS. These results demonstrate that PhaPAz has chaperone-like functions both in vitro and in vivo in E . coli recombinants, and suggests that phasins could have a general protective role in natural polyhydroxyalkanoate producers. [ABSTRACT FROM AUTHOR]

Bacterial biopolymers are naturally occurring materials comprising a wide range of molecules with diverse chemical structures that can be produced from renewable sources following the principles of the circular economy. Over the last decades, they have gained substantial interest in the biomedical field as drug nanocarriers, implantable material coatings, and tissue-regeneration scaffolds or membranes due to their inherent biocompatibility, biodegradability into nonhazardous disintegration products, and their mechanical properties, which are similar to those of human tissues. The present review focuses upon three technologically advanced bacterial biopolymers, namely, bacterial cellulose (BC), polyhydroxyalkanoates (PHA), and γ-polyglutamic acid (PGA), as models of different carbon-backbone structures (polysaccharides, polyesters, and polyamides) produced by bacteria that are suitable for biomedical applications in nanoscale systems. This selection models evidence of the wide versatility of microorganisms to generate biopolymers by diverse metabolic strategies. We highlight the suitability for applied sustainable bioprocesses for the production of BC, PHA, and PGA based on renewable carbon sources and the singularity of each process driven by bacterial machinery. The inherent properties of each polymer can be fine-tuned by means of chemical and biotechnological approaches, such as metabolic engineering and peptide functionalization, to further expand their structural diversity and their applicability as nanomaterials in biomedicine. [ABSTRACT FROM AUTHOR]