Search

Population history-focused DNA and ancient DNA (aDNA) research in Africa has dramatically increased in the past decade, enabling increasingly fine-scale investigations into the continent's past. However, while international interest in human genomics research in Africa grows, major structural barriers limit the ability of African scholars to lead and engage in such research and impede local communities from partnering with researchers and benefitting from research outcomes. Because conversations about research on African people and their past are often held outside Africa and exclude African voices, an important step for African DNA and aDNA research is moving these conversations to the continent. In May 2023 we held the DNAirobi workshop in Nairobi, Kenya and here we synthesize what emerged most prominently in our discussions. We propose an ideal vision for population history-focused DNA and aDNA research in Africa in ten years' time and acknowledge that to realize this future, we need to chart a path connecting a series of "landmarks" that represent points of consensus in our discussions. These include effective communication across multiple audiences, reframed relationships and capacity building, and action toward structural changes that support science and beyond. We concluded there is no single path to creating an equitable and self-sustaining research ecosystem, but rather many possible routes linking these landmarks. Here we share our diverse perspectives as geneticists, anthropologists, archaeologists, museum curators, and educators to articulate challenges and opportunities for African DNA and aDNA research and share an initial map toward a more inclusive and equitable future., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Due to limited intrinsic healing capacity of the meniscus, meniscal injuries pose a significant clinical challenge. The most common method for treatment of damaged meniscal tissues, meniscectomy, leads to improper loading within the knee joint, which can increase the risk of osteoarthritis. Thus, there is a clinical need for the development of constructs for meniscal repair that better replicate meniscal tissue organization to improve load distributions and function over time. Advanced three-dimensional bioprinting technologies such as suspension bath bioprinting provide some key advantages, such as the ability to support the fabrication of complex structures using non-viscous bioinks. In this work, the suspension bath printing process is utilized to print anisotropic constructs with a unique bioink that contains embedded hydrogel fibers that align via shear stresses during printing. Constructs with and without fibers are printed and then cultured for up to 56 d in vitro in a custom clamping system. Printed constructs with fibers demonstrate increased cell and collagen alignment, as well as enhanced tensile moduli when compared to constructs printed without fibers. This work advances the use of biofabrication to develop anisotropic constructs that can be utilized for the repair of meniscal tissue., (© 2023 IOP Publishing Ltd.)

The urban peoples of the Swahili coast traded across eastern Africa and the Indian Ocean and were among the first practitioners of Islam among sub-Saharan people 1,2 . The extent to which these early interactions between Africans and non-Africans were accompanied by genetic exchange remains unknown. Here we report ancient DNA data for 80 individuals from 6 medieval and early modern (AD 1250-1800) coastal towns and an inland town after AD 1650. More than half of the DNA of many of the individuals from coastal towns originates from primarily female ancestors from Africa, with a large proportion-and occasionally more than half-of the DNA coming from Asian ancestors. The Asian ancestry includes components associated with Persia and India, with 80-90% of the Asian DNA originating from Persian men. Peoples of African and Asian origins began to mix by about AD 1000, coinciding with the large-scale adoption of Islam. Before about AD 1500, the Southwest Asian ancestry was mainly Persian-related, consistent with the narrative of the Kilwa Chronicle, the oldest history told by people of the Swahili coast 3 . After this time, the sources of DNA became increasingly Arabian, consistent with evidence of growing interactions with southern Arabia 4 . Subsequent interactions with Asian and African people further changed the ancestry of present-day people of the Swahili coast in relation to the medieval individuals whose DNA we sequenced., (© 2023. The Author(s).)

Granular hydrogels are jammed assemblies of hydrogel microparticles (i.e., "microgels"). In the field of biomaterials, granular hydrogels have many advantageous properties, including injectability, microscale porosity, and tunability by mixing multiple microgel populations. Methods to fabricate microgels often rely on water-in-oil emulsions (e.g., microfluidics, batch emulsions, electrospraying) or photolithography, which may present high demands in terms of resources and costs, and may not be compatible with many hydrogels. This work details simple yet highly effective methods to fabricate microgels using extrusion fragmentation and to process them into granular hydrogels useful for biomedical applications (e.g., 3D printing inks). First, bulk hydrogels (using photocrosslinkable hyaluronic acid (HA) as an example) are extruded through a series of needles with sequentially smaller diameters to form fragmented microgels. This microgel fabrication technique is rapid, low-cost, and highly scalable. Methods to jam microgels into granular hydrogels by centrifugation and vacuum-driven filtration are described, with optional post-crosslinking for hydrogel stabilization. Lastly, granular hydrogels fabricated from fragmented microgels are demonstrated as extrusion printing inks. While the examples described herein use photocrosslinkable HA for 3D printing, the methods are easily adaptable for a wide variety of hydrogel types and biomedical applications.

The extrusion printing of inks into suspension baths is an exciting tool, as it allows the printing of diverse and soft hydrogel inks into 3D space without the need for layer-by-layer fabrication. However, this printing process is complex and there have been limited studies to experimentally and computationally characterize the process. In this work, hydrogel inks (i.e., gelatin methacrylamide (GelMA)), suspension baths (i.e., agarose, Carbopol), and the printing process are examined via rheological, computational, and experimental analyses. Rheological data on various hydrogel inks and suspension baths is utilized to develop computational printing simulations based on Carreau constitutive viscosity models of the printing of inks within suspension baths. These results are then compared to experimental outcomes using custom print designs where features such as needle translation speed, defined in this work as print speed, are varied and printed filament resolution is quantified. Results are then used to identify print parameters for the printing of a GelMA ink into a unique guest-host hyaluronic acid suspension bath. This work emphasizes the importance of key rheological properties and print parameters for suspension bath printing and provides a computational model and experimental tools that can be used to inform the selection of print settings., (© 2021 Wiley-VCH GmbH.)

Multiple lines of genetic and archaeological evidence suggest that there were major demographic changes in the terminal Late Pleistocene epoch and early Holocene epoch of sub-Saharan Africa 1-4 . Inferences about this period are challenging to make because demographic shifts in the past 5,000 years have obscured the structures of more ancient populations 3,5 . Here we present genome-wide ancient DNA data for six individuals from eastern and south-central Africa spanning the past approximately 18,000 years (doubling the time depth of sub-Saharan African ancient DNA), increase the data quality for 15 previously published ancient individuals and analyse these alongside data from 13 other published ancient individuals. The ancestry of the individuals in our study area can be modelled as a geographically structured mixture of three highly divergent source populations, probably reflecting Pleistocene interactions around 80-20 thousand years ago, including deeply diverged eastern and southern African lineages, plus a previously unappreciated ubiquitous distribution of ancestry that occurs in highest proportion today in central African rainforest hunter-gatherers. Once established, this structure remained highly stable, with limited long-range gene flow. These results provide a new line of genetic evidence in support of hypotheses that have emerged from archaeological analyses but remain contested, suggesting increasing regionalization at the end of the Pleistocene epoch., (© 2022. The Author(s).)

The natural extracellular matrix (ECM) within tissues is physically contracted and remodeled by cells, allowing the collective shaping of functional tissue architectures. Synthetic materials that facilitate self-assembly similar to natural ECM are needed for cell culture, tissue engineering, and in vitro models of development and disease. To address this need, we develop fibrous hydrogel assemblies that are stabilized with photocrosslinking and display fiber density–dependent strain-responsive properties (strain stiffening and alignment). Encapsulated mesenchymal stromal cells locally contract low fiber density assemblies, resulting in macroscopic volumetric changes with increased cell densities and moduli. Because of properties such as shear-thinning and self-healing, assemblies can be processed into microtissues with aligned ECM deposition or through extrusion bioprinting and photopatterning to fabricate constructs with programmed shape changes due to cell contraction. These materials provide a synthetic approach to mimic features of natural ECM, which can now be processed for applications in biofabrication and tissue engineering.

We are a group of archaeologists, anthropologists, curators and geneticists representing diverse global communities and 31 countries. All of us met in a virtual workshop dedicated to ethics in ancient DNA research held in November 2020. There was widespread agreement that globally applicable ethical guidelines are needed, but that recent recommendations grounded in discussion about research on human remains from North America are not always generalizable worldwide. Here we propose the following globally applicable guidelines, taking into consideration diverse contexts. These hold that: (1) researchers must ensure that all regulations were followed in the places where they work and from which the human remains derived; (2) researchers must prepare a detailed plan prior to beginning any study; (3) researchers must minimize damage to human remains; (4) researchers must ensure that data are made available following publication to allow critical re-examination of scientific findings; and (5) researchers must engage with other stakeholders from the beginning of a study and ensure respect and sensitivity to stakeholder perspectives. We commit to adhering to these guidelines and expect they will promote a high ethical standard in DNA research on human remains going forward., (© 2021. The Author(s), under exclusive licence to Springer Nature Limited.)

The extracellular matrix (ECM) is composed of biochemical and biophysical cues that control cell behaviors and bulk mechanical properties. For example, anisotropy of the ECM and cell alignment are essential in the directional properties of tissues such as myocardium, tendon, and the knee meniscus. Technologies are needed to introduce anisotropic behavior into biomaterial constructs that can be used for the engineering of tissues as models and towards translational therapies. To address this, we developed an approach to align hydrogel fibers within cell-degradable bioink filaments with extrusion printing, where shear stresses during printing align fibers and photocrosslinking stabilizes the fiber orientation. Suspensions of hydrogel fibers were produced through the mechanical fragmentation of electrospun scaffolds of norbornene-modified hyaluronic acid, which were then encapsulated with meniscal fibrochondrocytes, mesenchymal stromal cells, or cardiac fibroblasts within gelatin-methacrylamide bioinks during extrusion printing into agarose suspension baths. Bioprinting parameters such as the needle diameter and the bioink flow rate influenced shear profiles, whereas the suspension bath properties and needle translation speed influenced filament diameters and uniformity. When optimized, filaments were formed with high levels of fiber alignment, which resulted in directional cell spreading during culture over one week. Controls that included bioprinted filaments without fibers or non-printed hydrogels of the same compositions either with or without fibers resulted in random cell spreading during culture. Further, constructs were printed with variable fiber and resulting cell alignment by varying print direction or using multi-material printing with and without fibers. This biofabrication technology advances our ability to fabricate constructs containing aligned cells towards tissue repair and the development of physiological tissue models., (© 2021 IOP Publishing Ltd.)

The human colonization of eastern Africa's near- and offshore islands was accompanied by the translocation of several domestic, wild and commensal fauna, many of which had long-term impacts on local environments. To better understand the timing and nature of the introduction of domesticated caprines (sheep and goat) to these islands, this study applied collagen peptide fingerprinting (Zooarchaeology by Mass Spectrometry or ZooMS) to archaeological remains from eight Iron Age sites, dating between ca 300 and 1000 CE, in the Zanzibar, Mafia and Comoros archipelagos. Where previous zooarchaeological analyses had identified caprine remains at four of these sites, this study identified goat at seven sites and sheep at three, demonstrating that caprines were more widespread than previously known. The ZooMS results support an introduction of goats to island eastern Africa from at least the seventh century CE, while sheep in our sample arrived one-two centuries later. Goats may have been preferred because, as browsers, they were better adapted to the islands' environments. The results allow for a more accurate understanding of early caprine husbandry in the study region and provide a critical archaeological baseline for examining the potential long-term impacts of translocated fauna on island ecologies., (© 2021 The Authors.)

The origin and evolution of hominin mortuary practices are topics of intense interest and debate 1-3 . Human burials dated to the Middle Stone Age (MSA) are exceedingly rare in Africa and unknown in East Africa 1-6 . Here we describe the partial skeleton of a roughly 2.5- to 3.0-year-old child dating to 78.3 ± 4.1 thousand years ago, which was recovered in the MSA layers of Panga ya Saidi (PYS), a cave site in the tropical upland coast of Kenya 7,8 . Recent excavations have revealed a pit feature containing a child in a flexed position. Geochemical, granulometric and micromorphological analyses of the burial pit content and encasing archaeological layers indicate that the pit was deliberately excavated. Taphonomical evidence, such as the strict articulation or good anatomical association of the skeletal elements and histological evidence of putrefaction, support the in-place decomposition of the fresh body. The presence of little or no displacement of the unstable joints during decomposition points to an interment in a filled space (grave earth), making the PYS finding the oldest known human burial in Africa. The morphological assessment of the partial skeleton is consistent with its assignment to Homo sapiens, although the preservation of some primitive features in the dentition supports increasing evidence for non-gradual assembly of modern traits during the emergence of our species. The PYS burial sheds light on how MSA populations interacted with the dead.

The Middle to Later Stone Age transition is a critical period of human behavioral change that has been variously argued to pertain to the emergence of modern cognition, substantial population growth, and major dispersals of Homo sapiens within and beyond Africa. However, there is little consensus about when the transition occurred, the geographic patterning of its emergence, or even how it is manifested in the stone tool technology that is used to define it. Here, we examine a long sequence of lithic technological change at the cave site of Panga ya Saidi, Kenya, that spans the Middle and Later Stone Age and includes human occupations in each of the last five Marine Isotope Stages. In addition to the stone artifact technology, Panga ya Saidi preserves osseous and shell artifacts, enabling broader considerations of the covariation between different spheres of material culture. Several environmental proxies contextualize the artifactual record of human behavior at Panga ya Saidi. We compare technological change between the Middle and Later Stone Age with on-site paleoenvironmental manifestations of wider climatic fluctuations in the Late Pleistocene. The principal distinguishing feature of Middle from Later Stone Age technology at Panga ya Saidi is the preference for fine-grained stone, coupled with the creation of small flakes (miniaturization). Our review of the Middle to Later Stone Age transition elsewhere in eastern Africa and across the continent suggests that this broader distinction between the two periods is in fact widespread. We suggest that the Later Stone Age represents new short use-life and multicomponent ways of using stone tools, in which edge sharpness was prioritized over durability., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Building tissues from scratch to explore entirely new cell configurations could revolutionize fundamental understanding in biology. Bioprinting is an emerging technology to do this. Although typically applied to engineer tissues for therapeutic tissue repair or drug screening, there are many opportunities for bioprinting within biology, such as for exploring cellular crosstalk or cellular morphogenesis. The overall goals of this Primer are to provide an overview of bioprinting with the biologist in mind, outline the steps in extrusion bioprinting (the most widely used and accessible technology), and discuss alternative bioprinting technologies and future opportunities for bioprinting in biology., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Bone surface modifications (BSMs) in faunal assemblages are frequently used to infer past agency and actions of hominins and carnivores, with implications for the emergence of key human behaviours. Patterning of BSMs has mostly been defined as a combination of the intensity of marks per bone portion and sometimes per element. Numerous variables involved in butchery can condition cut mark anatomical distribution, so much so that these variables are widely assumed to be stochastic. Here, we present a new methodological approach using a novel geospatial tool (Ikhnos) which combines the three-dimensional spatial documentation of cut mark patterns with spatial statistics based on wavelets, applied to three experimental and ethnoarchaeological faunal assemblages. We use wavelets to identify patterning of multiple longitudinal series of cut mark distributions on bones, and to establish similarities or differences in patterning within and across different assemblages. This method demonstrates the existence of general and behaviour-specific butchery patterns. It can also be used to effectively assess the proportion of mark clustering that is due to randomness, versus that which is conditioned by the butchery process.

The development of pastoralism transformed human diets and societies in grasslands worldwide. The long-term success of cattle herding in Africa has been sustained by dynamic food systems, consumption of a broad range of primary and secondary livestock products, and the evolution of lactase persistence (LP), which allows digestion of lactose into adulthood and enables the milk-based, high-protein, low-calorie diets characteristic of contemporary pastoralists. Despite the presence of multiple alleles associated with LP in ancient and present-day eastern African populations, the contexts for selection for LP and the long-term development of pastoralist foodways in this region remain unclear. Pastoral Neolithic ( c 5000 to 1200 BP) faunas indicate that herders relied on cattle, sheep, and goats and some hunting, but direct information on milk consumption, plant use, and broader culinary patterns is rare. Combined chemical and isotopic analysis of ceramic sherds ( n = 125) from Pastoral Neolithic archaeological contexts in Kenya and Tanzania, using compound-specific δ 13 C and Δ 13 C values of the major fatty acids, provides chemical evidence for milk, meat, and plant processing by ancient herding societies in eastern Africa. These data provide the earliest direct evidence for milk product consumption and reveal a history of reliance on animal products and other nutrients, likely extracted through soups or stews, and plant foods. They document a 5,000-y temporal framework for eastern Africa pastoralist cuisines and cultural contexts for selection for alleles distinctive of LP in eastern Africa., Competing Interests: The authors declare no competing interest.

Advances in areas such as data analytics, genomics, and imaging have revealed individual patient complexities and exposed the inherent limitations of generic therapies for patient treatment. These observations have also fueled the development of precision medicine approaches, where therapies are tailored for the individual rather than the broad patient population. 3D printing is a field that intersects with precision medicine through the design of precision implants with patient-directed shapes, structures, and materials or for the development of patient-specific in vitro models that can be used for screening precision therapeutics. Toward their success, advances in 3D printing and biofabrication technologies are needed with enhanced resolution, complexity, reproducibility, and speed and that encompass a broad range of cells and materials. The overall goal of this progress report is to highlight recent advances in 3D printing technologies that are helping to enable advances important in precision medicine., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Our knowledge of ancient human population structure in sub-Saharan Africa, particularly prior to the advent of food production, remains limited. Here we report genome-wide DNA data from four children-two of whom were buried approximately 8,000 years ago and two 3,000 years ago-from Shum Laka (Cameroon), one of the earliest known archaeological sites within the probable homeland of the Bantu language group 1-11 . One individual carried the deeply divergent Y chromosome haplogroup A00, which today is found almost exclusively in the same region 12,13 . However, the genome-wide ancestry profiles of all four individuals are most similar to those of present-day hunter-gatherers from western Central Africa, which implies that populations in western Cameroon today-as well as speakers of Bantu languages from across the continent-are not descended substantially from the population represented by these four people. We infer an Africa-wide phylogeny that features widespread admixture and three prominent radiations, including one that gave rise to at least four major lineages deep in the history of modern humans.

How food production first entered eastern Africa ~5000 years ago and the extent to which people moved with livestock is unclear. We present genome-wide data from 41 individuals associated with Later Stone Age, Pastoral Neolithic (PN), and Iron Age contexts in what are now Kenya and Tanzania to examine the genetic impacts of the spreads of herding and farming. Our results support a multiphase model in which admixture between northeastern African-related peoples and eastern African foragers formed multiple pastoralist groups, including a genetically homogeneous PN cluster. Additional admixture with northeastern and western African-related groups occurred by the Iron Age. These findings support several movements of food producers while rejecting models of minimal admixture with foragers and of genetic differentiation between makers of distinct PN artifacts., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The originally published version of this Article contained an error in Fig. 3, whereby an additional unrelated graph was overlaid on top of the magnetic susceptibility plot. Furthermore, the Article title contained an error in the capitalisation of 'Stone Age'. Both of these errors have now been corrected in both the PDF and HTML versions of the Article.

The Middle to Later Stone Age transition in Africa has been debated as a significant shift in human technological, cultural, and cognitive evolution. However, the majority of research on this transition is currently focused on southern Africa due to a lack of long-term, stratified sites across much of the African continent. Here, we report a 78,000-year-long archeological record from Panga ya Saidi, a cave in the humid coastal forest of Kenya. Following a shift in toolkits ~67,000 years ago, novel symbolic and technological behaviors assemble in a non-unilinear manner. Against a backdrop of a persistent tropical forest-grassland ecotone, localized innovations better characterize the Late Pleistocene of this part of East Africa than alternative emphases on dramatic revolutions or migrations.

We assembled genome-wide data from 16 prehistoric Africans. We show that the anciently divergent lineage that comprises the primary ancestry of the southern African San had a wider distribution in the past, contributing approximately two-thirds of the ancestry of Malawi hunter-gatherers ∼8,100-2,500 years ago and approximately one-third of the ancestry of Tanzanian hunter-gatherers ∼1,400 years ago. We document how the spread of farmers from western Africa involved complete replacement of local hunter-gatherers in some regions, and we track the spread of herders by showing that the population of a ∼3,100-year-old pastoralist from Tanzania contributed ancestry to people from northeastern to southern Africa, including a ∼1,200-year-old southern African pastoralist. The deepest diversifications of African lineages were complex, involving either repeated gene flow among geographically disparate groups or a lineage more deeply diverging than that of the San contributing more to some western African populations than to others. We finally leverage ancient genomes to document episodes of natural selection in southern African populations. PAPERCLIP., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Human-mediated biological exchange has had global social and ecological impacts. In sub-Saharan Africa, several domestic and commensal animals were introduced from Asia in the pre-modern period; however, the timing and nature of these introductions remain contentious. One model supports introduction to the eastern African coast after the mid-first millennium CE, while another posits introduction dating back to 3000 BCE. These distinct scenarios have implications for understanding the emergence of long-distance maritime connectivity, and the ecological and economic impacts of introduced species. Resolution of this longstanding debate requires new efforts, given the lack of well-dated fauna from high-precision excavations, and ambiguous osteomorphological identifications. We analysed faunal remains from 22 eastern African sites spanning a wide geographic and chronological range, and applied biomolecular techniques to confirm identifications of two Asian taxa: domestic chicken (Gallus gallus) and black rat (Rattus rattus). Our approach included ancient DNA (aDNA) analysis aided by BLAST-based bioinformatics, Zooarchaeology by Mass Spectrometry (ZooMS) collagen fingerprinting, and direct AMS (accelerator mass spectrometry) radiocarbon dating. Our results support a late, mid-first millennium CE introduction of these species. We discuss the implications of our findings for models of biological exchange, and emphasize the applicability of our approach to tropical areas with poor bone preservation.

Occupants of coastal and island eastern Africa-now known as the 'Swahili coast'-were involved in long-distance trade with the Indian Ocean world during the later first millennium CE. Such exchanges may be traced via the appearance of non-native animals in the archaeofaunal record; additionally, this record reveals daily culinary practises of the members of trading communities and can thus shed light on subsistence technologies and social organisation. Yet despite the potential contributions of faunal data to Swahili coast archaeology, few detailed zooarchaeological studies have been conducted. Here, we present an analysis of faunal remains from new excavations at two coastal Zanzibar trading locales: the small settlement of Fukuchani in the north-west and the larger town of Unguja Ukuu in the south-west. The occurrences of non-native fauna at these sites-Asian black rat (Rattus rattus) and domestic chicken (Gallus gallus), as well as domestic cat (Felis catus)-are among the earliest in eastern Africa. The sites contrast with one another in their emphases on wild and domestic fauna: Fukuchani's inhabitants were economically and socially engaged with the wild terrestrial realm, evidenced not only through diet but also through the burial of a cache of wild bovid metatarsals. In contrast, the town of Unguja Ukuu had a domestic economy reliant on caprine herding, alongside more limited chicken keeping, although hunting or trapping of wild fauna also played an important role. Occupants of both sites were focused on a diversity of near-shore marine resources, with little or no evidence for the kind of venturing into deeper waters that would have required investment in new technologies. Comparisons with contemporaneous sites suggest that some of the patterns at Fukuchani and Unguja Ukuu are not replicated elsewhere. This diversity in early Swahili coast foodways is essential to discussions of the agents engaged in long-distance maritime trade., (© 2017 The Authors International Journal of Osteoarchaeology Published by John Wiley & Sons Ltd.)

The interactions between cells and an underlying biomaterial are important for the promotion of cell adhesion, proliferation, and function. Mesenchymal stem cells (MSCs) have great clinical potential as they are an adult stem cell population capable of multilineage differentiation. The relationship between MSC behavior and several material properties including substrate stiffness and pore size are well investigated, but there has been little research on the influence of porous architecture in a three-dimensional scaffold with a well-controlled architecture. Here, we investigate the impact of two different three-dimensionally printed, pore geometries on the enrichment and differentiation of MSCs. 3D printed scaffolds with ordered cubic pore geometry were supportive of MSC enrichment from unprocessed bone marrow, resulting in cell surface marker expression that was comparable to typical adhesion to tissue culture polystyrene, the gold standard for MSC culture. Results also show that scaffolds fabricated with ordered cubic pores significantly increase the gene expression of MSCs undergoing adipogenesis and chondrogenesis, when compared to scaffolds with ordered cylindrical pores. However, at the protein expression level, these differences were modest. For MSCs undergoing osteogenesis, gene expression results suggest that cylindrical pores may initially increase early osteogenic marker expression, while protein level expression at later timepoints is increased for scaffolds with ordered cubic pores. Taken together, these results suggest that 3D printed scaffolds with ordered cubic pores could be a suitable culture system for single-step MSC enrichment and differentiation., Statement of Significance: Mesenchymal stem cells (MSCs) have great therapeutic potential, as they are capable of multilineage differentiation. MSC behavior, including lineage commitment, may be influenced by biomaterial properties including substrate stiffness and pore size. With three-dimensional (3D) printing, we can investigate these relationships in 3D culture systems. Here, we fabricated scaffolds with two different well-controlled pore geometries, and investigated the impact on MSC enrichment and differentiation. Results show that scaffolds with ordered cubic pore geometry were supportive of both MSC enrichment from unprocessed bone marrow as well as MSC differentiation, resulting in increased gene expression during adipogenesis and chondrogenesis. These results suggest that 3D printed scaffolds with ordered cubic pores could be a suitable culture system for single-step MSC enrichment and differentiation., (Copyright © 2016 Acta Materialia Inc. All rights reserved.)

With rising sea levels at the end of the Pleistocene, land-bridge or continental islands were formed around the world. Many of these islands have been extensively studied from a biogeographical perspective, particularly in terms of impacts of island creation on terrestrial vertebrates. However, a majority of studies rely on contemporary faunal distributions rather than fossil data. Here, we present archaeological findings from the island of Zanzibar (also known as Unguja) off the eastern African coast, to provide a temporal perspective on island biogeography. The site of Kuumbi Cave, excavated by multiple teams since 2005, has revealed the longest cultural and faunal record for any eastern African island. This record extends to the Late Pleistocene, when Zanzibar was part of the mainland, and attests to the extirpation of large mainland mammals in the millennia after the island became separated. We draw on modeling and sedimentary data to examine the process by which Zanzibar was most recently separated from the mainland, providing the first systematic insights into the nature and chronology of this process. We subsequently investigate the cultural and faunal record from Kuumbi Cave, which provides at least five key temporal windows into human activities and faunal presence: two at the end of the Last Glacial Maximum (LGM), one during the period of post-LGM rapid sea level rise and island formation, and two in the late Holocene (Middle Iron Age and Late Iron Age). This record demonstrates the presence of large mammals during the period of island formation, and their severe reduction or disappearance in the Kuumbi Cave sequence by the late Holocene. While various limitations, including discontinuity in the sequence, problematize attempts to clearly attribute defaunation to anthropogenic or island biogeographic processes, Kuumbi Cave offers an unprecedented opportunity to examine post-Pleistocene island formation and its long-term consequences for human and animal communities.

The functions of complex crystalline systems derived from supramolecular biological and non-biological assemblies typically emerge from homochiral programmed primary structures via first principles involving secondary, tertiary and quaternary structures. In contrast, heterochiral and racemic compounds yield disordered crystals, amorphous solids or liquids. Here, we report the self-assembly of perylene bisimide derivatives in a supramolecular helix that in turn self-organizes in columnar hexagonal crystalline domains regardless of the enantiomeric purity of the perylene bisimide. We show that both homochiral and racemic perylene bisimide compounds, including a mixture of 21 diastereomers that cannot be deracemized at the molecular level, self-organize to form single-handed helical assemblies with identical single-crystal-like order. We propose that this high crystalline order is generated via a cogwheel mechanism that disregards the chirality of the self-assembling building blocks. We anticipate that this mechanism will facilitate access to previously inaccessible complex crystalline systems from racemic and homochiral building blocks.

The importance of providing a physiologically relevant environment for cell culture is well recognized. The combination of proper environmental cues which are provided in vivo by the bloodstream and extracellular matrix must be reproduced to properly examine cell response in vitro, and cannot be recapitulated using traditional culture on polystyrene. Here, we have developed a device, the dynamic stem cell culture platform (DSCCP), consisting of a biomimetic scaffold cultured within the dynamic environment of a perfusion bioreactor. By varying scaffold parameters including stiffness and protein inclusion at the material surface, we found that human mesenchymal stem cells (hMSCs) were able to adhere to modified substrates, while still maintaining multipotency. Culture in a perfusion bioreactor showed cell survival and proliferation, particularly on modified substrates. The DSCCP represents a complete platform for cell adhesion and subsequent evaluation, including the response of a cell population to drug treatment.

A library of dendronized cyclotriveratrylene (CTV) crowns substituted with chiral, racemic, or achiral peripheral alkyl chains, including enantiopure R and S branched alkyls, "racemic by mixture", "racemic by synthesis", n-octyl, and n-dodecyl groups was synthesized. In solvophobic solvents and in bulk they self-assemble in helical columns. Their solution and bulk shape-persistent supramolecular structures were determined by a complementary combination of circular dichroism (CD) and UV in solution and thin film, microspot CD in thin film, differential scanning calorimetry combined with fiber X-ray diffraction, computer simulation, and molecular models. In solution, self-assembly via a cooperative mechanism generates single-handed columns from enantiopure CTVs and mixtures of right- and left-handed columns from racemic by mixture, racemic by synthesis, other combinations of R and S, and even from achiral compounds. In bulk state all supramolecular columns form a 3D hexagonal crystalline phase, Φ(h)(k) (P6₃ symmetry), that can be obtained only from single-handed columns and a columnar hexagonal 2D liquid crystal, Φ(h). The highest order Φ(h)(k) consists of enantiopure single-handed columns that are slightly distorted 12-fold triple helices. The "hat-shaped" dendronized CTV assembles in bent-branch pine-tree columns that allow interdigitation of alkyl groups in adjacent columns regardless of their direction. Enantiomerically rich, racemic, and achiral compositions undergo deracemization in the crystal state by transfer of the transient disc-like conformer of dendronized CTV from column to column during crown inversion. Solid state NMR experiments identified motional processes that allow such transfer. This unprecedented supramolecular chiral self-sorting will impact the creation of functions in complex systems.