Search

In this paper, we present results of plate impact simulations of shock compressed woven glass fiber-reinforced plastic (GRP) performed using the Arbitrary Lagrangian–Eulerian three-dimensional finite element code. A hyperelastic large-strain-based empirical Continuum Damage Mechanics (CDM) formulation is employed to describe damage initiation and growth in the shock-compressed GRP. The model parameters calibration scheme utilizes the Velocity Interferometer System for Any Reflector normal particle velocity measurements at the free surface of the GRP target plates. The impact velocity in the experiments ranged from 8.5 to 418 m/s. The finite element model considered planar 0°/90° bidirectional plies with an individual ply thickness of 0.68 mm, stacked to reach a total laminate thickness of 6.8 mm. The anisotropic elastic strains were estimated from the experimentally determined tetragonal symmetry stiffness matrix for the GRP. The strain-based damage model captures several salient features observed in the measured free surface particle wave profiles, including the shock rise time, onset of Elastic—Elastic Cracking, and the shape of the nonlinear portion of the experimental particle velocity profiles. The CDM model predicts the dominant damage mode to be matrix microcracking due to shear and the associated bulk expansion (bulking) under the global compressive loading in the plate impact configuration. [ABSTRACT FROM AUTHOR]

This article presents results from laser-driven shock compression experiments performed on pre-heated pure aluminum films at temperatures ranging from 23 to 400 °C. The samples were vapor deposited on the surface of a 500 μm thick sapphire substrate and mounted onto a custom holder with an integrated ring-heater to enable variable initial temperature conditions. A chirped pulse amplified laser was used to generate a pulse for both shocking the films and for probing the free surface velocity using Ultrafast Dynamic Ellipsometry. The particle velocity traces measured at the free surface clearly show elastic and plastic wave separation, which was used to estimate the decay of the elastic precursor amplitude over propagation distances ranging from 0.278 to 4.595 μm. Elastic precursors (which also correspond to dynamic material strength under uniaxial strain) of increasing amplitudes were observed with increasing initial sample temperatures for all propagation distances, which is consistent with expectations for aluminum in a deformation regime where phonon drag limits the mobility of dislocations. The experimental results show peak elastic amplitudes corresponding to axial stresses of over 7.5 GPa; estimates for plastic strain-rates in the samples are of the order 109/s. The measured elastic amplitudes at the micron length scales are compared with those at the millimeter length-scales using a two-parameter model and used to correlate the rate sensitivity of the dynamic strength at strain-rates ranging from 103 to 109/s and elevated temperature conditions. The overall trend, as inferred from the experimental data, indicates that the temperature-strengthening effect decreases with increasing plastic strain-rates. [ABSTRACT FROM AUTHOR]

We present results of a study conducted to better understand the yield and flow response of amorphous poly(bisphenol A carbonate), PC-Lexan ® (PC), under uniaxial compression and combined compression-and-shear impact loading. A split Hopkinson pressure bar (SHPB) is utilized to obtain nearly adiabatic uniaxial compression response of the PC in the strain-rate range of 1000-2000 [s.sup.-1]. Since temperature is expected to play an important role in governing the dynamic response of PC, nearly isothermal SHPB tests are also conducted and compared with the adiabatic response. In order to investigate the coupling of shear behavior and dilatation in PC at high loading rates, combined compression-and-shear plate impact experiments are conducted at strain-rates in the range of [10.sup.5]-[10.sup.6] [s.sup.-1]. In addition, novel plate impact experiments are conducted to better understand the evolution of the shearing resistance of PC in response to sudden alterations (drop) in hydrostatic pressure under extremely high shearing rates. POLYM. ENG. SCI., 52:1217-1231, 2012. [C] 2011 Society of Plastics Engineers, INTRODUCTION The last century has witnessed a tremendous increase in the use of polymers as engineering materials. Based on that experience, it is anticipated that polymers will play a continuously [...]