Search

Nuclear instruments & methods in physics research / A 1004, 165344 (1-9) (2021). doi:10.1016/j.nima.2021.165344, Multiphysics simulations are widely used in designing high average power RF cavities, which require iterations of RF simulation, thermal simulation and mechanical simulation in a closed loop. The reliability and accuracy of the multiphysics simulations are crucial, otherwise extra design margins are needed for simulation uncertainties. We present an experimental benchmark for the multiphysics simulations of a 40 kW L-band RF gun at the Photo Injector Test facility at DESY in Zeuthen (PITZ). The gun temperature distribution and frequency shift due to average RF heating power are measured and compared with multiphysics simulations., Published by North-Holland Publ. Co., Amsterdam

This work discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency gun from Cs 2 Te photocathodes illuminated with ps-long UV laser pulses and presumed homogeneous flattop laser transverse distribution. The measured charge shows the expected linear dependence in the quantum efficiency limited emission regime at low laser pulse energies. At higher laser pulse energy, the measured charge in the space charge limited emission regime should saturate, assuming an ideal homogeneous flattop laser transverse distribution. However, this behavior is not observed experimentally. Instead of saturating, the measured charge continues to increase with laser pulse energy, albeit with much weaker dependence than in the quantum efficiency limited emission regime. Simulations with the space charge particle tracking code ASTRA show that the charge saturates as expected using a homogeneous flattop laser transverse distribution. The discrepancy between simulations and measured excess charge may be attributed to the presence of unintentional Gaussian-like decaying radial halo beyond the core of the otherwise presumed homogeneous flattop core. The rate of increase of the measured charge at high laser pulse energies seems to be proportional to the amount of halo despite charge saturation in the core of the transverse laser radial profile. By utilizing core + halo particle distributions based on measured radial laser profiles, ASTRA simulations and semi-analytical emission models reproduce the behavior of the measured charge for a wide range of RF gun and laser operational parameters within the measurement uncertainties.

The matching of a particle beam to specific transverse parameters, imposed by various operational, functional and diagnostic reasons, is an essential procedure in most types of accelerators. While well-established methods can easily match beams of negligible self fields, their accuracy is significantly reduced in the presence of strong space-charge forces. In a pursuit of time-efficient matching solutions for space-charge influenced beams, two approaches are demonstrated in this paper: a faster and more approximative one for symmetric beam transport along periodic and dense lattices, and a more analytic one for broader beam and lattice conditions. Beam dynamics simulations and experimental measurements are used to validate the performance of the suggested methods for the matching requirements of the transverse phase–space tomography at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ).

Physical review letters 122(4), 044801 (2019). doi:10.1103/PhysRevLett.122.044801, Temporally modulated electron beams have a wide array of applications ranging from the generation of coherently enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultrafast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at ∼6 MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the nonultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to ∼20 MeV while preserving the imparted density modulation., Published by APS, College Park, Md.

10th International Particle Accelerator Conference, IPAC'19, Melbourne, Australia, 19 May 2019 - 24 May 2019; Journal of physics / Conference series Conference series [...] 1350, 012036 - (2019). doi:10.1088/1742-6596/1350/1/012036, A free-electron laser based THz source is undergoing design studies at the Photo Injector Test facility at DESY in Zeuthen (PITZ). It is considered as a prototype for pump-probe experiments at the European XFEL, benefiting from the fact that the electron beam from the PITZ facility has an identical pulse train structure as the XFEL pulses. In the proposed proof-of-principle experiment, the electron beam (up to 4 nC bunch charge and 200 A peak current) will be accelerated to 16-22 MeV/c to generate SASE radiations in an LCLS-I undulator in the THz range between 60 and 100 pm with an expected energy of up to ~1 mJ/pulse. In this paper, we report our simulations on the optimization of the photo-injector and the design of the transport and matching beamline. Experimental investigations on the generation, characterization and matching of the high charge beam in the existing 22-m-long beamline will also be presented., Published by IOP Publ.20382, Bristol

10th International Particle Accelerator Conference, IPAC’19, Melbourne, Australia, 2 May 2019 - 24 May 2019; Journal of physics / Conference series Conference series [...] 1350, 012046 - (2019). doi:10.1088/1742-6596/1350/1/012046, Laser pulse shaping is one of the key elements to generate low emittance electron beams with RF photoinjectors. Ultimately high performance can be achieved with ellipsoidal laser pulses, but 3-dimensional shaping is challenging. High beam quality can also be reached by simple transverse pulse shaping, which has demonstrated improved beam emittance compared to a transversely uniform laser in the 'pancake' photoemission regime. In this contribution we present the truncation of a Gaussian laser at a radius of approximately one sigma in the intermediate (electron bunch length directly after emission about the same as radius) photoemission regime with high acceleration gradients (up to 60 MV/m). This type of electron bunch is used e.g. at the European XFEL and FLASH free electron lasers at DESY, Hamburg site and is being investigated in detail at the Photoinjector Test facility at DESY in Zeuthen (PITZ). Here we present ray-tracing simulations and experimental data of a laser beamline upgrade enabling variable transverse truncation. Initial projected emittance measurements taken with help of this setup are shown, as well as supporting beam dynamics simulations. Additional simulations show the potential for substantial reduction of slice emittance at PITZ., Published by IOP Publ.20382, Bristol

44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) : [Proceedings] - IEEE, 2019. - ISBN 978-1-5386-8285-2 - doi:10.1109/IRMMW-THz.2019.8874425 2019 44th International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2019, Paris, France, 1 Sep 2019 - 6 Sep 2019; IEEE 1 pp. (2019). doi:10.1109/IRMMW-THz.2019.8874425, There is a high demand for intense THz sources since “many excitation mechanisms of matter resonate in the terahertz regime” especially for condensed matters. “Accelerator-based THz sources provide the wide tunability together with high intensity and repetition rates beyond 100 kHz, that will enable broad application at the European XFEL to the most interesting scientific problems in the field” [1]. Supported by European XFEL a proof of principle study is started at the Photo-Injector Test Facility located at DESY in Zeuthen site (PITZ). Since PITZ and European XFEL electron sources are identical the X-ray and THz radiation can be produced with identical bunch train structure so that for every X-ray pulse a corresponding THz pulse can be provided for the pump-and- probe experiments., Published by IEEE

9th International Particle Accelerator Conference, IPAC18, Vancouver, Kanada, 29 Apr 2018 - 4 May 2018; Journal of physics / Conference Series 1067, 042012 (2018). doi:10.1088/1742-6596/1067/4/042012, The self-modulation instability is fundamental for the plasma wakefield acceleration experiment of the AWAKE (Advanced Wakefield Experiment) collaboration at CERN where this effect is used to generate proton bunches for the resonant excitation of high acceleration fields. Utilizing the availability of flexible electron beam shaping together with excellent diagnostics including an RF deflector, a supporting experiment was set up at the electron accelerator PITZ (Photo Injector Test facility at DESY, Zeuthen site), given that the underlying physics is the same. After demonstrating the effect [1] the next goal is to investigate in detail the self-modulation of long (with respect to the plasma wavelength) electron beams.In this contribution we describe parameter studies on self-modulation of a long electron bunch in an argon plasma. The plasma was generated with a discharge cell with densities in the 10$^{13}$ cm$^{−3}$ to 10$^{15}$ cm$^{−3}$ range. The plasma density was deduced from the plasma wavelength as indicated by the self-modulation period. Parameter scans were conducted with variable plasma density and electron bunch focusing., Published by IOP Publ., Bristol

Plasma physics and controlled fusion 61(4), 045012 (2019). doi:10.1088/1361-6587/ab04b9, We present a new method to determine the electron density of a plasma by measuring the periodicity of modulations introduced to the longitudinal phase space of a relativistic particle bunch by the interaction with the plasma via the self-modulation instability. As the modulation is solely depending on the plasma density and the beam parameters, this method allows to determine the time-resolved density of a plasma at the position of beam passage, which is confirmed in particle-in-cell simulations. Densities in the range of 3.6 × 10$^{12}$ cm$^{−3}$ – 7.2 × 10$^{15}$ cm$^{−3}$ have been measured and the measurement accuracy is confirmed by comparison to spectroscopic plasma density measurements., Published by IOP Publ., Bristol

Physical review letters 121(6), 064801 (2018). doi:10.1103/PhysRevLett.121.064801, Particle-beam-driven plasma wakefield acceleration (PWFA) enables various novel high-gradient techniques for powering future compact light-source and high-energy physics applications. Here, a driving particle bunch excites a wakefield response in a plasma medium, which may rapidly accelerate a trailing witness beam. In this Letter, we present the measurement of ratios of acceleration of the witness bunch to deceleration of the driver bunch, the so-called transformer ratio, significantly exceeding the fundamental theoretical and thus far experimental limit of 2 in a PWFA. An electron bunch with ramped current profile was utilized to accelerate a witness bunch with a transformer ratio of $4.6^{+2.2}_{−0.7}$ in a plasma with length $∼10 cm$, also demonstrating stable transport of driver bunches with lengths on the order of the plasma wavelength., Published by APS, College Park, Md.