Search

Polyethylene terephthalate (PET) is one of the most produced plastic materials in the world. The emergence of microplastics and nanoplastics (MPs/NPs) as a significant environmental contaminant has become a matter of increasing concern. While the toxicological effects of PET NPs have been widely researched, there is a lack of methodologies for studying their accumulation. The present study introduces a novel method to monitor the distribution of PET NPs in germinating wheat (Triticum aestivum L.) seeds. This involves the functionalization of superparamagnetic iron oxide nanoparticles (SPIONs) with PET NPs (PET–fSPIONs) coupled with magnetic resonance microimaging (µMRI) to provide insight into their distribution within the seed. The present study has demonstrated that PET–fSPIONs accumulate in specific regions of germinating wheat seeds, including the shoot apical meristem, the radicle, the coleoptile, the plumule, and the scutellum. Furthermore, the accumulation of PET–fSPIONs has been shown to exert a discernible effect on spin–spin relaxation (T2), as observed via MRI and quantitative T2 relaxation time analysis. The accumulation of PET NPs in embryo regions was also confirmed by SEM. Diffusion-weighted magnetic resonance imaging (DW-MRI) and non-invasive chemical shift imaging analyses demonstrated that PET NPs resulted in restricted diffusion within the highlighted areas, as well as an impact on lipid content. Our study reveals that using µMRI with fSPIONs provides a non-invasive method to monitor the biodistribution of PET nanoparticles in wheat seeds. Additionally, it offers valuable insights into the microstructural interactions of PET. [ABSTRACT FROM AUTHOR]

Nanosized Cu‐containing ZSM‐5 catalysts with different n(Si)/n(Al) ratio of 18.9–50.5 were prepared by ion‐exchange. The physico‐chemical characterization clearly shows that the molar ratio of framework T atoms influences the nature and distribution of copper species. According to DR UV‐Vis, TPR‐H2, EPR, or FT‐IR spectroscopy analyses, the amount of aggregated copper species increases with increasing the framework n(Si)/n(Al) ratio. Thus, the activity of the Cu‐containing ZSM‐5 with n(Si)/n(Al) ratio of 47.0—50.5 in the selective catalytic NO reduction with NH3 (NH3‐SCR‐DeNOx) significantly decreases compared to the other materials (n(Si)/n(Al) ratio of 18.9—19.6). The reaction mechanism has been discussed in light of the results of 2D COS (two‐dimensional correlation spectroscopy) analysis of IR spectra and catalytic properties of the zeolites. The results make evident that enhanced activity of Cu‐containing ZSM‐5 in NH3‐SCR‐DeNOx is correlated with the formation of different NOx− under the experimental conditions. [ABSTRACT FROM AUTHOR]

Cylindrical, cm‐sized monolithic Al2O3 xerogels with hierarchical meso‐/macropore system were prepared by sol‐gel synthesis. The influence of both solvent exchange and drying on monolith stability and the resulting pore system was studied following mass and volume of the monolith as well as by porosimetry and electron microscopy. Crack‐free drying of the monoliths requires a proper management of drying stress. This is achieved by adjusting the drying rate and solvent exchange procedure applied to the intermediate lyogels. Moreover, mainly through differences in capillary pressure, changing the pore fluid allows an adjustment of the mesopore width from 7.6 nm to 10.5 nm. Neither solvent exchange nor drying affect the macropores, the width of which stays at 1.5 μm. Finally, CO2 methanation over Ni‐impregnated Al2O3 monoliths reveals CO2 conversion and CH4 selectivity comparable to an industrial Ni/Al2O3 benchmark catalyst. [ABSTRACT FROM AUTHOR]

There is considerable motivation in the catalysis community and chemical industry to envision a future where rational catalyst design and targeted chemical process optimization become standard. Achieving this goal for heterogeneous catalysis requires a cultural shift centered around effective research data management. The core elements of modern catalysis research are synthesis, characterization, and testing, while all can be elevated by effective collection, correlation, interoperation, and exploitation of data between disciplines and stakeholders. Here, first steps are made towards a holistic picture of an industrial Ni/Al2O3 reference catalyst for CO2 methanation. A range of conventional and advanced characterization tools are applied to probe metal particle size and pore characteristics of the support, selected as crucial parameters for catalyst performance. Challenges are shown with respect to current reporting of characterization data and metadata, which ultimately influences the development and reliability of digital twins in catalysis research. Furthermore, the cooperation and combined expertise of diverse research groups from different fields is recognized as essential to deliver meaningful progress towards the digital future of catalysis research. [ABSTRACT FROM AUTHOR]

Comparative studies over micro-/mesoporous Cu-containing zeolites ZSM-5 prepared by top-down treatment involving NaOH, TPAOH or mixture of NaOH/TPAOH (tetrapropylammonium hydroxide) were conducted. The results of the catalytic data revealed the highest activity of the Cu-ZSM-5 catalyst both in the absence and presence of water vapor. The physico-chemical characterization (diffuse reflectance UV-Vis (DR UV-Vis), Fourier transform infrared (FT-IR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, temperature-programmed desorption of NOx (TPD-NOx), and microkinetic modeling) results indicated that the microporous structure of ZSM-5 effectively stabilized isolated Cu ion monomers. Besides the attempts targeted to the modification of the textural properties of the parent ZSM-5, in the next approach, we studied the effect of the co-presence of sodium and copper cations in the microporous H-ZSM-5. The presence of co-cation promoted the evolution of [Cu–O–Cu]2+ dimers that bind NOx strongly with the desorption energy barrier of least 80 kJ mol−1. Water presence in the gas phase significantly decreases the rate of ammonia oxidation, while the reaction rates and activation energies of NH3-SCR remain unaffected. [ABSTRACT FROM AUTHOR]

Cylindrical, cm‐sized monolithic Al2O3 xerogels with hierarchical meso‐/macropore system were prepared by sol‐gel synthesis. The influence of both solvent exchange and drying on monolith stability and the resulting pore system was studied following mass and volume of the monolith as well as by porosimetry and electron microscopy. Crack‐free drying of the monoliths requires a proper management of drying stress. This is achieved by adjusting the drying rate and solvent exchange procedure applied to the intermediate lyogels. Moreover, mainly through differences in capillary pressure, changing the pore fluid allows an adjustment of the mesopore width from 7.6 nm to 10.5 nm. Neither solvent exchange nor drying affect the macropores, the width of which stays at 1.5 μm. Finally, CO2 methanation over Ni‐impregnated Al2O3 monoliths reveals CO2 conversion and CH4 selectivity comparable to an industrial Ni/Al2O3 benchmark catalyst. [ABSTRACT FROM AUTHOR]

CO2 methanation is often performed on Ni/Al2O3 catalysts, which can suffer from mass transport limitations and, therefore, decreased efficiency. Here we show the application of a hierarchically porous Ni/Al2O3 catalyst for methanation of CO2. The material has a well-defined and connected meso- and macropore structure with a total porosity of 78%. The pore structure was thoroughly studied with conventional methods, i.e., N2 sorption, Hg porosimetry, and He pycnometry, and advanced imaging techniques, i.e., electron tomography and ptychographic X-ray computed tomography. Tomography can quantify the pore system in a manner that is not possible using conventional porosimetry. Macrokinetic simulations were performed based on the measures obtained by porosity analysis. These show the potential benefit of enhanced mass-transfer properties of the hierarchical pore system compared to a pure mesoporous catalyst at industrially relevant conditions. Besides the investigation of the pore system, the catalyst was studied by Rietveld refinement, diffuse reflectance ultraviolet-visible (DRUV/vis) spectroscopy, and H2-temperature programmed reduction (TPR), showing a high reduction temperature required for activation due to structural incorporation of Ni into the transition alumina. The reduced hierarchically porous Ni/Al2O3 catalyst is highly active in CO2 methanation, showing comparable conversion and selectivity for CH4 to an industrial reference catalyst. [ABSTRACT FROM AUTHOR]

Nanosized Cu‐containing ZSM‐5 catalysts with different n(Si)/n(Al) ratio of 18.9–50.5 were prepared by ion‐exchange. The physico‐chemical characterization clearly shows that the molar ratio of framework T atoms influences the nature and distribution of copper species. According to DR UV‐Vis, TPR‐H2, EPR, or FT‐IR spectroscopy analyses, the amount of aggregated copper species increases with increasing the framework n(Si)/n(Al) ratio. Thus, the activity of the Cu‐containing ZSM‐5 with n(Si)/n(Al) ratio of 47.0—50.5 in the selective catalytic NO reduction with NH3 (NH3‐SCR‐DeNOx) significantly decreases compared to the other materials (n(Si)/n(Al) ratio of 18.9—19.6). The reaction mechanism has been discussed in light of the results of 2D COS (two‐dimensional correlation spectroscopy) analysis of IR spectra and catalytic properties of the zeolites. The results make evident that enhanced activity of Cu‐containing ZSM‐5 in NH3‐SCR‐DeNOx is correlated with the formation of different NOx− under the experimental conditions. [ABSTRACT FROM AUTHOR]

A series of ZSM-5 zeolite materials were synthesized from organic structure-directing agent (OSDA)-free seeded systems, including nanosized silicalite-1 (12 wt % water suspension or in powder form) or nanosized ZSM-5 (powder form of ZSM-5 prepared at 100 or 170 °C). The physicochemical characterization revealed aggregated species in the samples based on silicalite-1. Contrarily, the catalysts based on ZSM-5 seeds revealed isolated copper species, and thus, higher NO conversion during the selective catalytic reduction of NO x with NH 3 (NH 3 -SCR-DeNO x ) was observed. Furthermore, a comparison of the Cu-containing ZSM-5 catalysts, conventionally prepared in the presence of OSDAs and prepared with an environmentally more benign approach (without OSDAs), revealed their comparable activity in NH 3 -SCR-DeNO x ., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)