Search

Psilocybin {systematic name: 3-[2-(dimethylamino)ethyl]-1H-indol-4-yl dihydrogen phosphate} is a zwitterionic tryptamine natural product found in numerous species of fungi known for their psychoactive properties. Following its structural elucidation and chemical synthesis in 1959, purified synthetic psilocybin has been evaluated in clinical trials and has shown promise in the treatment of various mental health disorders. In a recent process-scale crystallization investigation, three crystalline forms of psilocybin were repeatedly observed: Hydrate A, Polymorph A, and Polymorph B. The crystal structure for Hydrate A was solved previously by single-crystal X-ray diffraction. This article presents new crystal structure solutions for the two anhydrates, Polymorphs A and B, based on Rietveld refinement using laboratory and synchrotron X-ray diffraction data, and density functional theory (DFT) calculations. Utilizing the three solved structures, an investigation was conducted via Rietveld method (RM) based quantitative phase analysis (QPA) to estimate the contribution of the three different forms in powder X-ray diffraction (PXRD) patterns provided by different sources of bulk psilocybin produced between 1963 and 2021. Over the last 57 years, each of these samples quantitatively reflect one or more of the hydrate and anhydrate polymorphs. In addition to quantitatively evaluating the composition of each sample, this article evaluates correlations between the crystal forms present, corresponding process methods, sample age, and storage conditions. Furthermore, revision is recommended on characterizations in recently granted patents that include descriptions of crystalline psilocybin inappropriately reported as a single-phase `isostructural variant.' Rietveld refinement demonstrated that the claimed material was composed of approximately 81% Polymorph A and 19% Polymorph B, both of which have been identified in historical samples. In this article, we show conclusively that all published data can be explained in terms of three well-defined forms of psilocybin and that no additional forms are needed to explain the diffraction patterns.

A general synthetic method was developed to access known tryptamine natural products present in psilocybin-producing mushrooms. In vitro and in vivo experiments were then conducted to inform speculations on the psychoactive properties, or lack thereof, of the natural products. In animal models, psychedelic activity by baeocystin alone was not evident using the mouse head twitch response assay, despite its putative dephosphorylated metabolite, norpsilocin, possessing potent agonist activity at the 5-HT2A receptor.

Described herein is an improved synthesis of 3-[2-(dimethylamino)ethyl]-1H-indol-4-yl dihydrogen phosphate (psilocybin). The protocol outlines: synthesis of multigram quantities of psilocybin, identification of critical in-process parameters, and isolation of psilocybin without the use of chromatography, TLC, or aqueous workup. The synthesis furnishes psilocybin in five steps in 23% overall yield from an inexpensive acetoxyindole starting material. With specific focus on process control and impurity fate and removal, the improved procedure is amenable to providing high-quality psilocybin.

Concerted multidisciplinary efforts have led to the development of Cyclin-Dependent Kinase inhibitors (CDKi’s) as small molecule drugs and chemical probes of intracellular CDK function. However, conflicting data has been reported on the inhibitory potency of CDKi’s and a systematic characterization of affinity and selectivity against intracellular CDKs is lacking. We have developed a panel of cell-permeable energy transfer probes to quantify target occupancy for all 21 human CDKs in live cells, and present a comprehensive evaluation of intracellular isozyme potency and selectivity for a collection of 46 clinically-advanced CDKi’s and tool molecules. We observed unexpected intracellular activity profiles for a number of CDKi’s, offering avenues for repurposing of highly potent molecules as probes for previously unreported targets. Overall, we provide a broadly applicable method for evaluating the selectivity of CDK inhibitors in living cells, and present a refined set of tool molecules to study CDK function., Cyclin-dependent kinase (CDK) inhibitors are widely used both in the clinic and for basic research aimed at dissecting the specific cellular functions of specific CDKs. Here, the authors report the development of a panel of fluorescent reporter probes and provide a comprehensive profile of the inhibitory activity of several CDK inhibitors towards all 21 CDKs in living cells.

A panel of cell-permeable energy transfer probes has been developed to quantify target occupancy for all 21 CDKs in live, intact cells. Here we present the first comprehensive evaluation of intracellular isozyme potency and selectivity for a collection of 46 clinically-advanced CDKi’s and tool molecules. Here we provide a broadly applicable method for evaluating the selectivity of chemical matter for CDKs in living cells, and present a refined set of tool molecules to study CDK function.

Protein kinases are intensely studied mediators of cellular signaling. While traditional biochemical screens are capable of identifying compounds that modulate kinase activity, these assays are limited in their capability of predicting compound behavior in a cellular environment. Here, we aim to bridge target engagement and compound-cellular phenotypic behavior by utilizing a bioluminescence resonance energy transfer (BRET) assay to characterize target occupancy within living cells for Bruton's tyrosine kinase (BTK). Using a diverse chemical set of BTK inhibitors, we determine intracellular engagement affinity profiles and successfully correlate these measurements with BTK cellular functional readouts. In addition, we leveraged the kinetic capability of this technology to gain insight into in-cell target residence time and the duration of target engagement, and to explore a structural hypothesis.

Luminogenic probes were designed and synthesized for the detection of uptake transporter activity in a lytic cell-based assay. These probes rely on a self-cleavable trimethyl lock quinone-cyanobenzothiazole (TMQ-CNBT) or trimethyl lock quinone-luciferin (TMQ-Luc) linked to the anion transporter substrate fluorescein. Upon cellular transport, the TMQ is reduced by viable cells, resulting in the facile intramolecular lactonization and rapid release of the bioluminescent reporter molecule. The uptake transporter activity can then be detected without removing and washing off the extracellular substrates. Six probes were tested with OATP1B1*1a and OATP1B3 overexpressing HEK293 cells, and all compounds showed up to 10.2-fold enhancement in uptake when compared to control cells. Uptake of TMQ-luciferin compounds 2, 4, and 6 increased linearly over time up to 30 min at a concentration ranging from 40 nM to 20 μM. The apparent Km values obtained at different time intervals up to 30 min were nearly identical for a given compound, which validates the 30 min window as appropriate for uptake transporter assays. The average apparent Km values ranged from 0.3 to 0.8 μM and 0.2 to 1.3 μM for OATP1B1*1a and OATP1B3, respectively, indicating good affinities to these anion transporters. Furthermore, uptake of compound 2 was inhibited by two inhibitors of OATP1B1*1a and OATP1B3: rifampicin and ritonavir. The preliminary results obtained from compound 2 exhibited a time-dependent, saturatable, and inhibitable nature of uptake, indicating the feasibility of using the probe for the detection of a transporter-mediated process. This add-and-read homogeneous assay may provide a convenient, rapid, and facile way to detect changes in transporter activity in a high-throughput format, and this assay design strategy could create a new platform for a general cell uptake assay for biomaterials in the future.

Real-time continuous monitoring of cellular processes offers distinct advantages over traditional endpoint assays. A comprehensive representation of the changes occurring in live cells over the entire length of an experiment provides information about the biological status of the cell and informs decisions about the timing of treatments or the use of other functional endpoint assays. We describe a homogeneous, nonlytic, bioluminescent assay that measures cell viability in real time. This time-dependent measurement allowed us to monitor cell health for 72 h from the same test samples, distinguish differential cell growth, and investigate drug mechanism of action by analyzing time- and dose-dependent drug effects. The real-time measurements also allowed us to detect cell death immediately (>75% signal decrease within 15 min of digitonin addition), analyze drug potency versus efficacy, and identify cytostatic versus toxic drug effects. We screened an oncology compound library (Z′ = 0.7) and identified compounds with varying activity at different time points (1.6% of the library showed activity within 3 h, whereas 35.4% showed a response by 47 h). The assay compared well with orthogonal endpoint cell viability assays and additionally provided data at multiple time points and the opportunity to multiplex assays on the same cells. To test the advantage of time-dependent measurements to direct optimal timing of downstream applications, we used the real-time cell viability assay to determine the ideal time to measure caspase activity by monitoring the onset of cell death and multiplexing a luminescent caspase activation assay on the same test samples.

Summary For kinase inhibitors, intracellular target selectivity is fundamental to pharmacological mechanism. Although a number of acellular techniques have been developed to measure kinase binding or enzymatic inhibition, such approaches can fail to accurately predict engagement in cells. Here we report the application of an energy transfer technique that enabled the first broad-spectrum, equilibrium-based approach to quantitatively profile target occupancy and compound affinity in live cells. Using this method, we performed a selectivity profiling for clinically relevant kinase inhibitors against 178 full-length kinases, and a mechanistic interrogation of the potency offsets observed between cellular and biochemical analysis. For the multikinase inhibitor crizotinib, our approach accurately predicted cellular potency and revealed improved target selectivity compared with biochemical measurements. Due to cellular ATP, a number of putative crizotinib targets are unexpectedly disengaged in live cells at a clinically relevant drug dose., Graphical Abstract, Highlights • The approach enables quantitative profiling of 178 full-length kinases • Compared with biochemical approaches, this is a better predictor of cellular potency • An unexpected intracellular selectivity is observed for certain kinase inhibitors • A mechanistic analysis of ATP interference on target engagement is performed, Vasta et al. describe a broad-spectrum approach (BRET) to quantitatively measure target engagement for kinases inside live cells. Compared with biochemical measurements, the analysis revealed an improved intracellular selectivity profile for clinically relevant kinase inhibitors. This serves as a mechanistic tool to determine the effect of cellular ATP on engagement potency.

Highly sensitive self-cleavable trimethyl lock quinone-luciferin substrates for diaphorase were designed and synthesized to measure NAD(P)H in biological samples and monitor viable cells via NAD(P)H-dependent cellular oxidoreductase enzymes and their NAD(P)H cofactors.

Bioluminescence methodologies have been extraordinarily useful due to their high sensitivity, broad dynamic range, and operational simplicity. These capabilities have been realized largely through incremental adaptations of native enzymes and substrates, originating from luminous organisms of diverse evolutionary lineages. We engineered both an enzyme and substrate in combination to create a novel bioluminescence system capable of more efficient light emission with superior biochemical and physical characteristics. Using a small luciferase subunit (19 kDa) from the deep sea shrimp Oplophorus gracilirostris, we have improved luminescence expression in mammalian cells ∼2.5 million-fold by merging optimization of protein structure with development of a novel imidazopyrazinone substrate (furimazine). The new luciferase, NanoLuc, produces glow-type luminescence (signal half-life >2 h) with a specific activity ∼150-fold greater than that of either firefly (Photinus pyralis) or Renilla luciferases similarly configured for glow-type assays. In mammalian cells, NanoLuc shows no evidence of post-translational modifications or subcellular partitioning. The enzyme exhibits high physical stability, retaining activity with incubation up to 55 °C or in culture medium for >15 h at 37 °C. As a genetic reporter, NanoLuc may be configured for high sensitivity or for response dynamics by appending a degradation sequence to reduce intracellular accumulation. Appending a signal sequence allows NanoLuc to be exported to the culture medium, where reporter expression can be measured without cell lysis. Fusion onto other proteins allows luminescent assays of their metabolism or localization within cells. Reporter quantitation is achievable even at very low expression levels to facilitate more reliable coupling with endogenous cellular processes.

The cytochrome P450s (CYPs) are central to ADME studies because of their central role in drug metabolism. Proper CYP assay design and a correct understanding of CYP assay selectivity are critical for generating and interpreting biologically relevant data during drug development. Bioluminescent CYP assays use luminogenic probe substrates that have the unique property of producing photons in a second reaction with luciferase.This article presents the general design principles for in vitro CYP assays. Specifically, the article focuses on the bioluminescent approach that couples CYP activity with photon production.Highly selective luminogenic substrates for CYP1A1, CYP1A2, CYP2C9, CYP3A4, CYP3A7, CYP4A and CYP4F have been developed with utility for interrogating the roles of these enzymes in biochemical and cell-based formats. These selective substrates are part of a larger collection of probes that deliver CYP inhibition and induction data that predict in vivo drug interactions. Furthermore, they support highly sensitive, rapid and scalable assays for cell-based and cell-free biochemical applications, which offer an alternative and often enabling option over conventional assay strategies.

The central role of nicotinamide adenine dinucleotides in cellular energy metabolism and signaling makes them important nodes that link the metabolic state of cells with energy homeostasis and gene regulation. In this study, we describe the implementation of cell-based bioluminescence assays for rapid and sensitive measurement of those important redox cofactors. We show that the sensitivity of the assays (limit of detection ∼0.5 nM) enables the selective detection of total amounts of nonphosphorylated or phosphorylated dinucleotides directly in cell lysates. The total amount of NAD+NADH or NADP+NADPH levels can be detected in as low as 300 or 600 cells/well, respectively. The signal remains linear up to 5,000 cells/well with the maximum signal-to-background ratios ranging from 100 to 200 for NAD+NADH and from 50 to 100 for NADP+NADPH detection. The assays are robust (Z' value0.7) and the inhibitor response curves generated using a known NAD biosynthetic pathway inhibitor FK866 correlate well with the reported data. More importantly, by multiplexing the dinucleotide detection assays with a fluorescent nonmetabolic cell viability assay, we show that dinucleotide levels can be decreased dramatically (80%) by FK866 treatment before changes in cell viability are detected. The utility of the assays to identify modulators of intracellular nicotinamide adenine dinucleotide levels was further confirmed using an oncology active compound library, where novel dinucleotide regulating compounds were identified. For example, the histone deacetylase inhibitor entinostat was a potent inhibitor of cellular nicotinamide adenine dinucleotides, whereas the selective estrogen receptor modulator raloxifene unexpectedly caused a twofold increase in cellular nicotinamide adenine dinucleotide levels.

THE GOAL OF THIS STUDY IS TO EMPLOY THE HALOTAG TECHNOLOGY FOR POSITRON EMISSION TOMOGRAPHY (PET), WHICH INVOLVES TWO COMPONENTS: the HaloTag protein (a modified hydrolase which covalently binds to synthetic ligands) and HaloTag ligands (HTLs). 4T1 murine breast cancer cells were stably transfected to express HaloTag protein on the surface (termed as 4T1-HaloTag-ECS, ECS denotes extracellular surface). Two new HTLs were synthesized and termed NOTA-HTL2G-S and NOTA-HTL2G-L (2G indicates second generation, S stands for short, L stands for long, NOTA denotes 1,4,7-triazacyclononane-N,N'N''-triacetic acid). Microscopy studies confirmed surface expression of HaloTag in 4T1-HaloTag-ECS cells, which specifically bind NOTA-HTL2G-S/L. Uptake of (64)Cu-NOTA-HTL2G-L in 4T1-HaloTag-ECS tumors (4.3 ± 0.5, 4.1± 0.2, 4.0 ± 0.2, 2.3 ± 0.1, and 2.2 ± 0.1 %ID/g at 0.5, 3, 6, 18, and 24 h post-injection respectively; n = 4) was significantly higher than that in the 4T1 tumors (3.0 ± 0.3, 3.0± 0.1, 3.0 ± 0.2, 2.0 ± 0.4, and 2.4 ± 0.3 %ID/g at 0.5, 3, 6, 18, and 24 h post-injection respectively; n = 4) at early time points. In comparison, (64)Cu-NOTA-HTL2G-S did not demonstrate significant uptake in either 4T1-HaloTag-ECS or 4T1 tumors. Blocking studies and autoradiography of tumor lysates confirmed that (64)Cu-NOTA-HTL2G-L binds specifically to HaloTag protein in the 4T1-HaloTag-ECS tumors, corroborated by histology. HaloTag protein-specific targeting and PET imaging in vivo with (64)Cu-NOTA-HTL2G-L serves as a proof-of-principle for future non-invasive and sensitive tracking of HaloTag-transfected cells with PET, as well as many other studies of gene/protein/cell function in vivo.

The photoreactivity of the 5-iodouracil chromophore was investigated toward understanding photo-cross-linking of nucleic acids bearing the chromophore to functionality in associated proteins. Irrad...

Five novel firefly luciferin analogues in which the benzothiazole ring system of the natural substrate was replaced with benzimidazole, benzofuran, benzothiophene, benzoxazole, and indole were synthesized. The fluorescence, bioluminescence, and kinetic properties of the compounds were evaluated with recombinant Photinus pyralis wild type luciferase. With the exception of indole, all of the substrates containing heterocycle substitutions produced readily measurable flashes of light with luciferase. Compared to that of luciferin, the intensities ranged from 0.3 to 4.4% in reactions with varying pH optima and times to reach maximal intensity. The heteroatom changes influenced both the fluorescence and bioluminescence emission spectra, which displayed maxima of 479-528 and 518-574 nm, respectively. While there were some interesting trends in the spectroscopic and bioluminescence properties of this group of structurally similar substrate analogues, the most significant findings were associated with the benzothiophene-containing compound. This synthetic substrate produced slow decay glow kinetics that increased the total light-based specific activity of luciferase more than 4-fold versus the luciferin value. Moreover, over the pH range of 6.2-9.4, the emission maximum is 523 nm, an unusual 37 nm blue shift compared to that of the natural substrate. The extraordinary bioluminescence properties of the benzothiophene luciferin should translate into greater sensitivity for analyte detection in a wide variety of luciferase-based applications.

The aldehyde dehydrogenase (ALDH) family of enzymes is critical for cell survival and adaptation to cellular and environmental stress. These enzymes are of interest as therapeutic targets and as biomarkers of stem cells. This article describes a novel, homogeneous bioluminescence assay to study the activity of the ALDH enzymes. The assay is based on a proluciferin–aldehyde substrate that is recognized and utilized by multiple ALDH enzyme isoforms to generate luciferin. A detection reagent is added to inactivate ALDH and generate light from the luciferin product. The luminescent signal is dependent on the ALDH enzyme concentration and the incubation time in the ALDH reaction; moreover, the luminescent signal generated with the detection reagent is stable for greater than 2 h. This assay provides many advantages over standard NADH fluorescence assays. It is more sensitive and the signal stability provided allows convenient assay setup in batch mode-based high-throughput screens. The assay also shows an accurate pharmacological response for a common ALDH inhibitor and is robust, with a large assay window (S/B = 64) and Z′ = 0.75.

Cytochrome P450 (P450) assays use probe substrates to interrogate the influence of new chemical entities toward P450 enzymes. We report the synthesis and study of a family of bioluminogenic luciferin acetal substrates that are oxidized by P450 enzymes to form luciferase substrates. The luciferin acetals were screened against a panel of purified P450 enzymes. In particular, one proluciferin acetal has demonstrated sensitive and selective CYP3A4-catalyzed oxidation to a luciferin ester-K(m) and k(cat) are 2.88 μM and 5.87 pmol metabolite · min(-1) · pmol enzyme(-1), respectively. The proluciferin acetal was used as a probe substrate to measure IC(50) values of known inhibitors against recombinant CYP3A4 or human liver microsomes. IC(50) values for the known inhibitors correlate strongly with IC(50) values calculated from the traditional high-performance liquid chromatography-based probe substrate testosterone. Luciferin acetals are rapidly oxidized to unstable hemi-orthoesters by CYP3A resulting in luciferin esters and, therefore, are conducive to simple rapid CYP3A bioluminescent assays.

For protein microarrays, maintaining protein stability during the slide processing steps of washing, drying, and storage is of major concern. Although several studies have focused on the stability of immobilized antibodies in antibody microarrays, studies on protein-protein interaction arrays and enzyme arrays are lacking. In this paper we used five bait-prey protein interaction pairs and three enzymes to optimize the washing, drying, and storage conditions for protein arrays. The protein arrays for the study were fabricated by combining HaloTag technology and cell-free protein expression. The HaloTag technology, in combination with cell-free expression, allowed rapid expression and immobilization of fusion proteins on hydrogel-coated glass slides directly from cell extracts without any prior purification. Experimental results indicate enzyme captured on glass slides undergoes significant loss of activity when washed and spin-dried using only phosphate buffer, as is typically done with antibody arrays. The impact of washing and spin-drying in phosphate buffer on protein-protein interaction arrays was minimal. However, addition of 5% glycerol to the wash buffer helps retain enzyme activity during washing and drying. We observed significant loss of enzyme activity when slides were stored dry at 4 degrees C, however immobilized enzymes remained active for 30 days when stored at -20 degrees C in 50% glycerol. We also found that cell-free extract containing HaloTag-fused enzymes could undergo multiple freeze/thaw cycles without any adverse impact on enzyme activity. The findings indicate that for large ongoing studies, proteins of interest expressed in cell-free extract can be stored at -70 degrees C and repeatedly used to print small batches of protein array slides to be used over a few weeks.

A set of 6'-alkylated aminoluciferins are shown to be bioluminescent substrates for Ultra-Glo and QuantiLum luciferases. These studies demonstrate that both the engineered and wild-type firefly luciferases tolerate much greater steric bulk at the 6' position of luciferin than has been previously reported. The nature of the alkyl substituent strongly affects the strength of the bioluminescent signal, which varies widely based on size, shape, and charge. Several compounds were observed to generate more light than the corresponding unsubstituted 6'-aminoluciferin. Determination of Michaelis-Menten constants for the substrates with Ultra-Glo indicated that the variation arises primarily from differences in V max, ranging from 1.33 x 10 (4) to 332 x 10 (4) relative light units, but in some cases K m (0.73-10.8 microM) also plays a role. Molecular modeling results suggest that interactions of the side chain with a hydrogen-bonding network at the base of the luciferin binding pocket may influence substrate-enzyme binding.

Cancer cells are dependent on metabolic pathways that have been altered to support unique requirements for cancer cell growth and survival. The central role of these pathways makes them attractive targets for new treatment approaches. Rapid and sensitive assays, amenable to high-throughput screening, are needed to study the enzymes, metabolites and cofactors involved in cancer cell metabolic pathways. We developed a bioluminescent technology to address these needs and monitor changes in the fundamental metabolic co-factors nicotinamide adenine dinucleotides and key metabolites such as lactate. The bioluminescent method uses a novel proluciferin substrate for the enzyme diaphorase. Luciferin is produced in the presence of NAD(P)H, resulting in a luciferase-generated light signal proportional to the starting NAD(P)H concentration. This is a versatile technology for measuring dinucleotide concentrations, enzyme activity and also metabolite levels. When lactate dehydrogenase is included in the reaction, the cellular metabolite lactate, an indicator of glycolytic rate, can be measured. NAD, NADP, NADH and NADPH can be measured in enzyme reactions or in biological samples, such as cells and tissues, with the use of NAD- and NADP-specific cycling enzymes. Total NAD+NADH or NADP+NADPH levels in cultured cells were rapidly monitored using a one-reagent addition, in-well plate protocol without the need for cell processing. Additionally, the levels of individual dinucleotides and their ratios were determined from cell and tissue samples using a streamlined in-well acid and base-treatment protocol. The effects of small molecules on cellular dinucleotide levels can be quickly assessed, as demonstrated with FK866, an inhibitor of NAD biosynthesis. Advantages of the bioluminescent approach over other detection methods include higher sensitivity (LOD ≤ 50 nM), larger maximum signal windows (S/B > 100) and compatibility with automated, high-throughput protocols (Z' > 0.8). By providing these features, the bioluminescent assays should be useful tools for facilitating the study of cancer cell metabolic pathways and the development of therapeutics that target these pathways. Citation Format: Donna Leippe, Mary Sobol, Jolanta Vidugiriene, Wenhui Zhou, Gediminas Vidugiris, Troy Good, Laurent Bernad, Poncho Meisenheimer, James Cali. Bioluminescent methods for investigating metabolic pathways. [abstract]. In: Proceedings of the 105th Annual Meeting of the American Association for Cancer Research; 2014 Apr 5-9; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2014;74(19 Suppl):Abstract nr 1429. doi:10.1158/1538-7445.AM2014-1429

Circulating or Cell-Free DNA in plasma can be used to detect biomarkers that show great promise for diagnosis and monitoring of cancer, and is already being used as a non-invasive method to detect trisomy in fetuses. There is currently great interest in the discovery of new cancer biomarkers and their potential clinical application. However, reproducible and efficient purification of these highly fragmented and low-concentration species represents a major challenge. Here we will present a novel method which is completely automated and allows parallel purification of circulating nucleic acid from plasma and serum using a medium-throughput robot. Sixteen samples can be processed simultaneously. The method was optimized to produce high-quality DNA that is suitable for use in quantitative PCR and next generation sequencing. In addition, the absence of any pre-processing steps improves reproducibility and lowers the risk of contamination.Initial characterization on plasma from pregnant women showed that fetal DNA could be detected as early as 4 weeks into gestation and could be tracked throughout pregnancy. Further characterization showed that the system was able to reliably detect less than 25 copies/ml plasma of fragmented DNA that was spiked into the sample. Subsequent work on plasma from patients with colorectal cancer showed that the system was able to detect DNA containing both wild-type and mutated EGFR, suggesting that this method can be a useful tool when screening plasma samples for biomarkers of interest. Citation Format: Douglas White, Douglas Horejsh, Zhiyang Zeng, Tetsuo Uyeda, Poncho Meisenheimer, Marjeta Urh. A novel method for efficient and hands-free purification of circulating DNA from human plasma. [abstract]. In: Proceedings of the 105th Annual Meeting of the American Association for Cancer Research; 2014 Apr 5-9; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2014;74(19 Suppl):Abstract nr 1872. doi:10.1158/1538-7445.AM2014-1872

Cell-based assay development for cancer drug discovery continues to advance toward more innovative methods that provide efficient workflow and meaningful data. Rapid, sensitive techniques that are non-lytic and therefore facilitate multiplexing with a wide range of assays allow more data to be gained per well and conserve precious samples. Real time measurement of cell viability also allows numerous measurements over time without the need for separate plates at each time point. Real time measurements allow unique analyses including interrogation of the timing of drug killing, identification of static vs toxic drug effects, and determination of the ideal time to multiplex an additional assay. Cancer drug discovery would benefit from novel assay technologies that allow real time measurements with multiplexing capability. We have developed a homogeneous, non-lytic, and bioluminescent method to analyze cell viability in real time through measurement of the reducing potential of the cell. The signal correlates with the number of viable cells making it well-suited for cytotoxicity studies. This Real Time Cell Viability Assay utilizes the NanoLuc luciferase enzyme, which is 100-fold brighter than either firefly (Photinus pyralis) or Renilla reniformis luciferase, and the novel substrate, furimazine. Together these reagents produce high intensity luminescence through an ATP-independent reaction. The assay can be performed in two formats, live cell endpoint or continuous read. The live cell endpoint method is sensitive, rapid, and enables extensive multiplexing opportunities due to the non-lytic measurement and signal depletion upon cell lysis. When the assay is set up in the continuous read format, the cell viability reagents can be added at the same time as cell plating, drug dosing, or at whatever point in the assay the researcher would like to start obtaining viability readings. The luminescent signal can be continually monitored from the same wells over an extended period of time to analyze cell viability in real time. This real time cell viability assay enables non-lytic cell viability measurements, extensive multiplexing options including both fluorescent and luminescent assays with no special filter requirements, straightforward normalization studies, conservation of precious samples and reagents, and a sensitive, real time measurement of cell viability. Citation Format: Sarah J. Duellman, Jolanta Vidugiriene, Wenhui Zhou, Jean Osterman, Ruslan Arbit, Laurent Bernad, Poncho Meisenheimer, James J. Cali. Bioluminescent, non-lytic, real-time cell viability assay. [abstract]. In: Proceedings of the 105th Annual Meeting of the American Association for Cancer Research; 2014 Apr 5-9; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2014;74(19 Suppl):Abstract nr 3743. doi:10.1158/1538-7445.AM2014-3743

Cell metabolism is an important and expanding area of research in the field of cancer biology. Simple, rapid assays for studying cellular metabolic pathways, their enzymes, metabolites and cofactors can facilitate these studies. We have developed two novel bioluminescent technologies, one for monitoring cell viability, and the other for monitoring changes in cellular nicotinamide adenine dinucleotides, that can facilitate the study of cell metabolism and its regulation. The bioluminescent cell viability assay is based on the metabolic activity of live cells. Metabolically active cells reduce a proluminogenic substrate in vivo which is then detected by a luciferase enzyme in the media. The luminescence output is correlated with the number of viable cells. The assay is non-toxic, sensitive (detects less than 10 cells/well) and has a large dynamic range (S/B>100). The key, differentiating feature of this assay is the incorporation of the recently developed stable and very bright NanoLuc™ luciferase and its profurimazine substrate, which allows changes in viability to be monitored in real-time and continuously, over extended periods of time, from the same sample. Three homogeneous, one-step, bioluminescent assays have been developed for the detection of nicotinamide adenine dinucleotides, specific for: (1) reduced forms NADH and NADPH, (2) non-phosphorylated forms NAD and NADH, and (3) phosphorylated forms NADP and NADPH. The assays are based on the reaction of the enzyme diaphorase with a proluciferin substrate, which in the presence of NADH or NADPH is converted to luciferin, a substrate for luciferase. These assays are sensitive (LOD ≤ 50 nM) and have large maximum signal windows (S/B > 100), two advantages over currently available colorimetric and fluorescent detection methods. They are also robust, and amenable to automated and high-throughput protocols (Z’ > 0.8). The high sensitivity, one-step reagent addition, and no requirement for sample processing, permit an in-well protocol for the assay of cells directly in culture plate wells. Changes in cellular NAD levels can be rapidly monitored, as demonstrated using FK866, an inhibitor of NAD biosynthesis. FK866 caused a decrease in NAD levels in multiple cell types with good signal windows (S/B > 10) and expected pharmacology (IC50 values = 1-10 nM). Citation Format: Donna Leippe, Mary Sobol, Sarah Duellman, Jolanta Vidugiriene, Wenhui Zhou, Gediminas Vidugiris, Troy Good, Laurent Bernad, Poncho Meisenheimer, James Cali. Bioluminescent assays for investigating cell metabolism. [abstract]. In: Proceedings of the 104th Annual Meeting of the American Association for Cancer Research; 2013 Apr 6-10; Washington, DC. Philadelphia (PA): AACR; Cancer Res 2013;73(8 Suppl):Abstract nr 1896. doi:10.1158/1538-7445.AM2013-1896

Cancer is a disease defined by uncontrolled cell growth where cellular energy metabolism pathways must evolve for tumors to survive and proliferate. NAD(P) and NAD(P)H play a major role in oxidative phosphorylation and their role in aerobic glycolysis is of great interest. Additionally, NAD(P)/NAD(P)H act as co-factors for enzymes involved in cancer pathogenesis through regulation of chromatin structure, DNA repair, and transcription (e.g. sirtuins and poly(ADP-ribose) polymerase). The study of how NAD(P)/NAD(P)H are generated and utilized during adaptive cancer cell energy metabolism would benefit from the development of a rapid, sensitive, and homogeneous assay to measure the level of these nucleotides. We developed a bioluminescent assay for measuring NAD(P)/NAD(P)H that can detect ≤ 0.1 µM NADH and has a 1000-fold dynamic range. The assay is well suited for high throughput screening (Z’ = 0.92, S/B = 95) and has been used to screen the LOPAC library. By coupling other reactions with NAD(P)/NAD(P)H measurement, we analyzed the levels of metabolites and the activity of enzymes, including isocitrate dehydrogenase and pyruvate dehydrogenase, in enzyme preparations and crude cell lysates. This method is applicable for measuring cellular NAD and NADH levels directly from cell culture without further sample handling. This assay is based on a novel proluciferin derivative that is processed in vitro through an enzymatic reaction. The released luciferin is detected in a coupled luciferin/luciferase reaction and the luminescent signal is correlated with the amount of NAD(P)/NAD(P)H present in the sample. As an extension of this approach, similar proluciferin chemistries were developed to detect the reducing potential of metabolically active cells. This robust luminescent assay can detect the reducing potential of less than 100 cells/well in 96-well format and distinguish small changes in cell number. Multiple cell lines were treated with cancer therapeutic compounds and the performance of the proluciferin approach was compared to commonly used colorimetric (e.g. MTT, MTS, and XTT) and fluorogenic (e.g. resazurin) methods. The proluciferin assay resulted in comparable pharmacological responses, significantly increased signal window, and superior sensitivity. Additionally, the proluciferin-based approach has been extended to other metabolic readouts. For example, novel proluciferin substrates were developed and applied to the detection of hydrogen peroxide in cells and in biological samples through a HRP-independent process. Bioluminescent assays provide greater sensitivity and dynamic range than most fluorescent or colorimetric assays, and are better suited for high throughput screening. Applying these assays to the study of cancer cell energy metabolism will provide a significant advantage over existing methods. Citation Format: {Authors}. {Abstract title} [abstract]. In: Proceedings of the 103rd Annual Meeting of the American Association for Cancer Research; 2012 Mar 31-Apr 4; Chicago, IL. Philadelphia (PA): AACR; Cancer Res 2012;72(8 Suppl):Abstract nr 1135. doi:1538-7445.AM2012-1135