Search

Background: Standardized efficacy surface tests for disinfectants are performed on pristine surfaces. There is a growing interest in understanding the impact of surface ageing on disinfectant activity, owing for example to the increased usage of ultraviolet (UV) radiation and oxidative chemistries for surface decontamination. This acknowledges that general surface 'wear and tear' following UV radiation and oxidative biocide exposure may impact biocidal product efficacy., Methods: PVC surfaces were aged through thermal and UV-A radiation (340 nm wavelength) following the use of standard ageing surface protocols to simulate natural surface degradation. Surface roughness, contact angle and scanning electron microscopy were performed to evaluate physical changes in PVC surfaces before and after artificial ageing. The efficacy of five pre-impregnated disinfectant wipes were evaluated using the ASTM E2967-15 on stainless-steel (control) and PVC surfaces (aged and non-aged)., Results: The type of formulation and the organism tested remained the most significant factors impacting disinfectant efficacy, compared with surface type. Both thermal ageing and UV-A exposure of PVC surfaces clearly showed signs of surface degradation, notably an increase in surface roughness. Physical changes were observed in the roughness of PVC after artificial ageing. A difference in disinfectant efficacy dependent on aged PVC surfaces was observed for some, but not all formulations., Conclusion: We showed that surface type and surface ageing can affect biocidal product efficacy, although in a non-predictable manner. More research is needed in this field to ascertain whether surface types and aged surfaces should be used in standardized efficacy testing., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: Each unit of red blood cells (RBCs) produced represents a significant cost to the healthcare system. Unnecessary blood wastage should be minimized. In clinical settings, alterations to blood component bags after issue from the protected setting of the blood bank include pen markings, and those that are exposed to an infectious environment require surface disinfecting. These units may be discarded due to unclear effects on RBC quality. In this study, we investigate whether pen markings or surface disinfection negatively affects the quality of packed RBCs and whether pen ink diffuses through the blood bag., Study Design and Methods: RBC bags were marked with pens (water, oil, or alcohol-based) or subjected to surface disinfection (ethanol, hydrogen peroxide [Preempt wipes], or benzalkonium chloride-based wipes [CaviWipes]) and sampled 24 h after applying the treatment and at day 42 post collection (n = 3 for each condition). The samples were analyzed for RBC in vitro quality markers. The presence of any ink in the RBC bags was investigated using mass spectrometry (n = 2)., Results: Data from 24 h and day 42 time points indicated no differences in RBC count, mean corpuscular volume, morphology, deformability, potassium content, or hemolysis for either pen markings or disinfectants when compared with their untreated controls (p > .05). No trace of ink was detected inside the bag., Conclusion: RBC units marked with ballpoint, gel, or Sharpie pens do not suffer a loss of in vitro quality, nor do RBC units which have been surface disinfected with 70% ethanol, Preempt wipes or CaviWipes., (© 2023 The Authors. Transfusion published by Wiley Periodicals LLC on behalf of AABB.)

Human pathogens can develop biofilm structures on different artificial substrates common in the food industry. In this study, we investigated the inactivation efficacy of low-energy X-ray irradiation on Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilms on food contact surfaces, including polyvinyl chloride (PVC), stainless steel with finish 2B (STS 2B), and Teflon. The numbers of viable cells in biofilms on all test coupons were significantly (p < 0.05) reduced as the X-ray dose increased. Interestingly, different biofilm inactivation levels were observed relative to various material surfaces. Teflon showed the lowest D 5 d (dose required for a 5-log reduction in cell count) values among three groups of coupons, whereas PVC exhibited higher D 5 d values than the other two coupons. The mechanism of the X-ray antibiofilm effect was identified through the measurement of extracellular polymeric substances (EPS) in biofilms. X-ray irradiation could remove exopolysaccharides, which are major component of EPS and the removal rate increased with increasing irradiation dose. The analyses also confirmed that the disintegration of EPS was strongly related to the trends of biofilm inactivation on different coupon surfaces. This study is the first to demonstrate that X-ray irradiation effectively inactivates major foodborne pathogen biofilms on various food contact surfaces and to evaluate its antibiofilm mechanisms to enhance safety in the food processing industries., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Di-(2-ethylhexyl) phthalate (DEHP) is the world's most widely used polyvinyl chloride (PVC) plasticizer and is used in virtually every category of flexible PVC. In fact, DEHP is extensively used in food cosmetics and medical packaging. It has become a serious problem in recent years. DEHP can be absorbed into the human body through the air, food, water, and skin. The current study involved intraperitoneal injection of DEHP dissolved in corn oil once daily for 21 consecutive days to investigate the effects of DEHP on the thyroid and the reproductive system in female rats. Results show that ovarian hormones (progesterone and estrogen) decreased significantly in the rats treated with DEHP compared to control. This result is supported by the alteration of folliculogenesis, the decrease of the follicles viability, and the apoptosis of the granulosa cells observed on histological sections of ovary and thyroid in female rats exposed to low doses of DEHP. Histopathological study revealed that DEHP could damage thyroid tissue and disrupt these functions. We also observed cellular damage, particularly in the liver cells, and a significant increase in biochemical parameters such as alanine aminotransferase (ALT) and aspartate aminotransferase (AST) compared to the control group.

In an attempt to ensure that bioplastics, progressively replacing petrochemical-derived plastics, do not release any harmful compound to the environment, the study assessed the toxic effects of three innovative bioplastic products: polyhydroxybutyrate resin (PHB), polylactic acid cups (PLA) and a polylactic acid/polyhydroxyalkanoate 3D printing filament (PLA/PHA), together with a synthetic polyvinyl chloride (PVC) toy in Paracentrotus lividus sea urchin larvae. PVC toy was the most toxic material, likely due to the added plasticizers; remarkably, even if PHB is conceived as a nontoxic polymer, it showed a slight toxicity and Gas Chromatography-Mass Spectometry analysis (GC-MS) revealed the presence of a wide range of additives. Conversely, PLA cups and PLA/PHA filament were innocuous for the larvae, a positive outcome for these renewable solutions. Proven that additives are also used in some bioplastic formulations, they should be carefully addressed to ensure that they are as safe as regarded., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The present study aimed at assessing the singular and combined effects of water copper and polyvinyl chloride microplastic (MPVC) on intestinal copper accumulation, histopathological damage, and stress-/immune-related genes' expression in common carp, Cyprinus carpio. Four groups of fish were maintained in triplicate: control (kept in clean water), Cu (exposed to 0.25 mg/L of copper), MPVC (exposed to 0.5 mg/L of MPVC), and Cu-MPVC (exposed to 0.25 mg/L of copper + 0.5 mg/L of MPVC). After 14-day exposure, the fish of Cu and Cu-MPVC treatments exhibited significantly higher intestinal copper contents, compared to the fish of control and MPVC treatments. In this regard, the Cu-MPVC fish had significantly higher copper content than the Cu fish. Exposure to copper and/or MPVC significantly upregulated the intestinal heat shock protein 70 (hsp70), cytochrome P450 family 1 subfamily A member 1 (cyp1a1), lysozyme (lys), defensin (def), mucin 2 (muc2), and mucin 5 (muc5) expression. The highest expression of hsp70, cyp1a1, lys, and def was related to Cu-MPVC treatment; whereas, the highest expression of muc2 and muc5 was observed in Cu and MPVC treatments. Exposure to copper and/or MPVC induced intestinal damage, which Cu-MPVC fish exhibited the highest severity. The present study revealed that exposure to copper and/or MPVC causes intestinal histopathological damage and upregulation in stress- and immune-related genes' expression. The most serious effects were observed in Cu-MPVC treatment that might be due to additive effects of copper and MPVC and/or higher copper accumulation in this treatment., (© 2021 Wiley Periodicals LLC.)

Poly(vinyl chloride) (PVC) is the most used biomedical polymer worldwide. PVC is a stable and chemically inert polymer. However, microorganisms can colonize PVC producing biomedical device-associated infections. While surface modifications of PVC can help improve the antimicrobial and antiviral properties, the chemically inert nature of PVC makes those modifications challenging and potentially toxic. In this work, we modified the PVC surface using a derivative riboflavin molecule that was chemically tethered to a plasma-treated PVC surface. Upon a low dosage of blue light, the riboflavin tethered to the PVC surface became photochemically activated, allowing for Pseudomonas aeruginosa bacterial biofilm and lentiviral in situ eradication.

High concentrations of micro- and nanoparticles of common plastic materials present in the environment are causing an adverse health impact on living organisms. As a model study, here we report the synthesis and characterization of luminescent polyvinyl chloride (PVC) and poly(methyl methacrylate) (PMMA) nanoparticles and investigate the interaction with normal human lung fibroblast cells (IMR 90) to understand the uptake, translocation, and toxicity of PVC and PMMA nanoparticles. The synthesized particles are in the size range of 120-140 nm with a negative surface potential. The colocalization and uptake efficiency of the nanoparticles were analyzed, and the cytotoxicity assay shows significant reduction in cell viability. Cellular internalization was investigated using colocalization and dynasore inhibitor tests, which showed that the PVC and PMMA nanoparticles enter into the cell via endocytosis. The polymer nanoparticles induced a reduction in viability, decrease in adenosine triphosphate, and increase in reactive oxygen species and lactate dehydrogenase concentrations. In addition, the polymer nanoparticles caused cell cycle arrest at sub-G 1 , G 0 /G 1 , and G2/M phases, followed by apoptotic cell death. Our results reported here are important to the emerging data on understanding the impact of common polymer particles on human health.

Microplastics have become a global concern in recent years. In this study, we studied (i) whether the presence of polyvinyl chloride (PVC) microparticles may affect cadmium (Cd) uptake in mussel (Mytilus edulis); and (ii) the biological effects of PVC microparticles exposure alone or in combination with Cd. Significant Cd uptake in digestive gland was observed following Cd exposure. However, PVC did not significantly increase Cd uptake compared with Cd alone treatment. In terms of biological impacts, significantly lower neutral red retention (NRR) time and elevated expression of Metallothionein isoform 20-IV (MT-20) were observed in mussels exposed to Cd alone, or combined with microplastics, yet there was no significant difference between them. catalase (CAT) expression only showed a significant increase in mussels exposed to Cd alone. This work provides an insight into the relationship on resulting biological impacts between these two contaminants.

Aims: Four commercially available robotic vacuum cleaners were assessed for sampling efficiency of wet disseminated Bacillus atrophaeus spores on carpet, polyvinyl chloride (PVC) and laminate flooring. Furthermore, their operability was evaluated and decontamination efficiency of one robot was assessed, using a sodium hypochlorite solution., Methods and Results: In an environmental chamber, robots self-navigated around 4 m 2 of flooring containing a single contaminated 0·25 m 2 tile (c. 10 4 spores per cm 2 ). Contamination levels at predetermined locations were assessed by macrofoam swabs (PVC and laminate) or water soluble tape (carpet), before and after sampling. Robots were dismantled postsampling and spore recoveries assessed. Aerosol contamination was also measured during sampling. Robot sampling efficiencies were variable, however, robots recovered most spores from laminate (up to 17·1%), then PVC and lastly the carpet. All robots spread contamination from the 'hotspot' (all robots spread <0·6% of the contamination to other areas) and became surface contaminated. Spores were detected at low levels during air sampling (<5·6 spores per litre). Liquid decontamination inactivated 99·1% of spores from PVC., Conclusions: Robotic vacuum cleaners show promise for both sampling and initial decontamination of indoor flooring., Significance and Impact of the Study: In the event of a bioterror incident, e.g. deliberate release of Bacillus anthracis spores, areas require sampling to determine the magnitude and extent of contamination, and to establish decontamination efficacy. In this study, we investigate robotic sampling methods against high concentrations of bacterial spores applied by wet deposition to different floorings, contamination spread to other areas, potential transfer of spores to the operators and assessment of a wet vacuum robot for spore inactivation. The robots' usability was evaluated and how they can be employed in real life scenarios. This will help to reduce the economic cost of sampling and the risk to sampling/decontamination teams., (© 2018 Crown copyright. Journal of Applied Microbiology © 2018 The Society for Applied Microbiology. This article is published with the permission of the Controller of HMSO and the Queen’s Printer for Scotland.)

Bioelectricity plays a vital role in living organisms. Although electrical stimulation is introduced in the field of bone regeneration, the concept of a dose-response relationship between surface potential and osteogenesis is not thoroughly studied. To optimize the osteogenic properties of different surface potentials, a flexible piezoelectric membrane, poly(vinylidene fluoridetrifluoroethylene) [P(VDF-TrFE)], is fabricated by annealing treatment to control its β phases. The surface potential and piezoelectric coefficients (d 33 ) of the membranes can be regulated by increasing β phase contents. Compared with d 33  = 20 pC N -1 (surface potential = -78 mV) and unpolarized membranes, bone marrow mesenchymal stem cells (BM-MSCs) cultured on the d 33  = 10 pC N -1 (surface potential = -53 mV) membranes have better osteogenic properties. In vivo, d 33  = 10 pC N -1 membranes result in rapid bone regeneration and complete mature bone-structure formation. BM-MSCs on d 33  = 10 pC N -1 membranes have the lowest reactive oxygen species level and the highest mitochondrial membrane electric potential, implying that these membranes provide the best electrical qunantity for BM-MSCs' proliferation and energy metabolism. This study establishes an effective method to control the surface potential of P(VDF-Trfe) membranes and highlights the importance of optimized electrical stimulation in bone regeneration., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Di (2-ethylhexyl) phthalate (DEHP), a typical plasticizer used for polyvinyl chloride (PVC), is eluted from PVC-made blood containers and protects against red blood cell (RBC) hemolysis. However, concerns have arisen regarding the reproductive and developmental risks of DEHP in humans, and the use of alternative plasticizers for medical devices has been recommended worldwide. In this study, we propose that the use of a novel plasticizer, 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester (DL9TH), could help produce more useful and safe blood containers. PVC sheet containing DL9TH and di (2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate (DOTH) provides comparable or superior protective effects to RBCs relative to PVC sheet containing DEHP or di-isononyl-cyclohexane-1,2-dicarboxylate (DINCH ® , an alternative plasticizer that has been used in PVC sheets for blood containers). The total amount of plasticizer eluted from DOTH/DL9TH-PVC sheets is nearly the same as that eluted from DEHP-PVC sheets. In addition, DOTH/DL9TH-PVC has better cold resistance than DEHP- and DINCH ® -PVC sheets. In vitro and in vivo tests for biological safety based on International Organization for Standardization guidelines (10993 series) suggest that the DOTH/DL9TH-PVC sheet can be used safely. Subchronic toxicity testing of DL9TH in male rats in accordance with the principles of Organisation for Economic Co-operation and Development Test Guideline 408 showed that DL9TH did not induce adverse effects up to the highest dose level tested (717 mg/kg body weight/day). There were no effects on testicular histopathology and sperm counts, and no indications of endocrine effects: testosterone, thyroid-stimulating hormone, follicle-stimulating hormone, and 17β-estradiol were unchanged by the treatment, compared with the control group. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1052-1063, 2018., (© 2017 Wiley Periodicals, Inc.)

Polyvinyl chloride (PVC) endotracheal tubes (ETTs) nanoetched with a fungal lipase have been shown to reduce bacterial growth and biofilm formation and could be an inexpensive solution to the complex problem of ventilator-associated pneumonia (VAP). Although bacterial growth and colonization on these nanoetched materials have been well characterized, little is known about the mechanism by which the fungal lipase degrades the PVC and, thus, alters its properties to minimize bacteria functions. This study used X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) to better describe the surface chemistry of both unetched and lipase nanoetched PVC ETT. ATR-FTIR analysis of the unetched and treated surfaces showed a similar presence of a plasticizer. This was confirmed by XPS analysis, which showed an increase of carbon and the presence of oxygen on both unetched and nanoetched surfaces. A quantitative comparison of the FTIR spectra revealed significant correlations (Pearson's correlation, R =0.997 [ R 2 =0.994, P <0.001]) between the unetched and nanomodified PVC ETT spectra, demonstrating similar surface chemistry. This analysis showed no shifting or widening of the bands in the spectra and no significant changes in the intensity of the infrared peaks due to the degradation of the plasticizer by the fungal lipase. In contrast, results from this study did demonstrate significantly increased nanoscale surface features on the lipase etched compared to non-etched PVC ETTs. This led to a change in surface energetics, which altered ion adsorption to the ETTs. Thus, these results showed that PVC surfaces nanoetched with a 0.1% lipase solution for 48 hours have no significant change on surface chemistry but do significantly increase nanoscale surface roughness and alters ion adsorption, which suggests that the unique properties of these materials, including their previously reported ability to decrease bacterial adhesion and growth, are due to the changes in the degree of the nanoscale roughness, not changes in their surface chemistry., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Background: Use of the plasticiser di(2-ethylhexyl) phthalate (DEHP) in polyvinyl chloride (PVC) blood bags poses a potential dilemma. The presence of DEHP in blood bags has been shown to be beneficial to red blood cells during storage by diminishing haemolysis. However, DEHP use in PVC may be carcinogenic or estrogenising. Vepoloxamer is a poloxamer with rheological and cytoprotective rheological properties and a favourable toxicity profile in clinical trials. We hypothesised that vepoloxamer may be sufficient to replace the plasticiser DEHP to prevent elevated haemolysis while conserving the biochemical and redox potential++ in RBCs stored for up to 42 days., Materials and Methods: Paired analyses of aliquots from pooled RBC suspensions of ABO identical donors were aseptically split into test storage containers (DEHP/PVC or DEHP-free/ethylene vinyl acetate [EVA]) supplemented with or without vepoloxamer (at concentrations of 0.1, 1, 5 or 7.89 mg/mL) and cold stored for up to 42 days., Results: Vepoloxamer significantly prevented the increased haemolysis induced by the absence of DEHP in EVA bags in a dose-dependent manner by days 28 and 42 of storage (approx. 50% reduction of the maximum concentration of vepoloxamer; p<0.001). There was an inverse correlation between the concentration of vepoloxamer used and the haemolysis rate (r 2 =0.27, p<0.001) and a direct correlation between haemolysis and phosphatidylserine (PS) exposure (r 2 =0.42; p<0.01). Increased osmotic fragility and shear induced deformability of 42-day stored RBC in EVA bags was significantly corrected by the addition of vepoloxamer., Discussion: Vepoloxamer, in a concentration-dependent fashion, is able to partly rescue the increased haemolysis and PS exposure induced by the absence of the commonly used plasticiser DEHP. These results provide initial but strong evidence to support vepoloxamer use to replace DEHP in long-term storage of RBC.

Iodine-modified TiO2(I-TiO2) film were coated on medical-grade PVC material by impregnation-deposition method and subsequently characterized by XRD, SEM, TEM, AFM, DRS and XPS. The photocatalytic anti-bacterial activity of I-TiO2/PVC was investigated both by in vitro anti-bacterial experiments and by clinical study. The results revealed that I-TiO2/PVC exhibit excellent photocatalytic antibacterial activity, which can destroy the propagation of the Escherichia coli and cause the deactivation and death of most E. coli bacteria within 30min visible light illumination. Clinical study on animals showed that I-TiO2 coated on PVC decrease the formation of biofilm on PVC surface in the mechanical ventilation. Furthermore, I-TiO2/PVC can effectively reduce inflammation of tracheal tissue of bam suckling pig and prevents the occurrence of VAP., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The retention of selective biofilms of Methanosarcina species within anaerobic digesters could reduce start-up times and enhance the efficiency of the process in treating high-strength domestic sewage. The objective of the study was to examine the effect of the surface characteristics of six common polymer support materials on the initial adhesion of the model methanogen, Methanosarcina barkeri, and to assess the potential of these support materials as selective biofilm carriers. Results from both the initial adhesion tests and extended DLVO (xDLVO) model correlated with each other, with PVC (12% surface coverage/mm(2)), PTFE (6% surface coverage/mm(2)), and PP (6% surface coverage/mm(2)), shown to be the better performing support materials for initial adhesion, as well as subsequent biofilm formation by M. barkeri after 72h. Experimental results of these three support materials showed that the type of material strongly influenced the extent of adhesion from M. barkeri (p<0.0001), and the xDLVO model was able to explain the results in these environmental conditions. Therefore, DLVO physicochemical forces were found to be influential on the initial adhesion of M. barkeri. Scanning electron microscopy suggested that production of extracellular polymeric substances (EPS) from M. barkeri could facilitate further biofilm development. This study highlights the potential of using the xDLVO model to rapidly identify suitable materials for the selective adhesion of M. barkeri, which could be beneficial in both the start-up and long-term phases of anaerobic digestion., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Optimum design of support materials for microorganisms is required for the construction of bioreactors. However, the effects of support materials on microorganisms are still unclear. In this study, we investigated the adhesion behavior of Escherichia coli (E. coli) on hydroxyapatite (HA), polyurethane (PU), poly(vinyl chloride) (PVC), and carbon (Carbon) to obtain basic knowledge for the design of support materials. The total metabolic activity and number of E. coli adhering on the samples followed the order of HA ≈ Carbon>PVC>PU. On the other hand, the water contact angle of the pellet surfaces followed the order of HA

Background and Objectives: Di-2-ethylhexyl phthalate (DEHP) is a blood bag plasticizer. It is also a toxin, raising concerns for vulnerable populations, for example, neonates and infants. Here, the in vitro quality of red cell concentrates (RCC) stored in paediatric bags formulated with alternative plasticizers to DEHP was compared., Materials and Methods: RCC were pooled and split into polyvinylchloride (PVC)/DEHP, PVC/1,2-cyclohexanedicarboxylic acid diisononyl ester (DINCH) or PVC/butyryl trihexyl citrate (BTHC) bags. Quality was assessed on storage days 5, 21, 35 and 43., Results: Metabolism differed among the bags: pCO2 levels were lowest and pO2 were highest in BTHC bags. Glucose consumption and lactate production suggested higher metabolic rates in BTHC bags. ATP levels were best maintained in DINCH bags (day 43 mean level: 2·86 ± 0·29 μmol/g Hb). RCC in BTHC bags had the greatest potassium release (54·6 ± 3·0 mm on day 43). From day 21, haemolysis was higher in BTHC bags (P < 0·01) and by day 43 had exceeded 0·8% (0·85 ± 0·10%). RCC in BTHC bags showed more microparticle formation than RCC in DEHP or DINCH bags., Conclusion: The results suggest that the BTHC formulation used was detrimental to RBC quality. DINCH bags could be a viable alternative to DEHP: they outperformed DEHP bags energetically, with better maintenance of ATP levels., (© 2015 International Society of Blood Transfusion.)

An accurate continuous intravenous injection via a peristaltic finger infusion pump has been utilized at outpatient clinics recently. An infusion element designed for this pump is necessary for the accurate handling of the pump, and for proper use of this equipment, we need accurate information. Our experiments have shown that medication administration has occasionally been incomplete at the calculated input time when a peristaltic finger infusion pump has been used. In this paper, we have investigated the cause of the delay in the administration time and the effect of the attachment procedure using a combination of features from three kinds of such infusion pumps and five kinds of exclusive polyvinyl chloride (PVC) infusion sets, under various conditions. Our results suggest that the time required for complete administration was correlated to the input time when five kinds of PVC tubing without stretching were attached to three kinds of peristaltic finger infusion pumps (R(2)=0.9998-1.0000). However, when the PVC tubing was stretched 1-3 cm and was attached to the pump, the time required for complete administration of the solution was prolonged compared to the recommended listed input time (p<0.01-0.05, ANOVA, Tukey-Kramer multiple comparison). Therefore, we suggest that the procedure technique used by the medical staff and involving the infusion pump adversely prolonged the time required for completion of the administration of medication. In our opinion, pharmacists must provide information concerning not only the drugs, but also the medical devices used to the physicians and nurses.

The objective of the study was to establish an in vitro model of Candida albicans-Staphylococcus epidermidis mixed species biofilm (BF) on polyvinyl chloride (PVC) material, and to investigate the formation and the structure of mixed species BF formation using a combined approach of confocal laser scanning microscope (CLSM), scanning electron microscope (SEM), and 3D image reconstruction technique. Mixed species BF is achieved by co-incubating Staphylococcus epidermidis bacteria (ATCC35984) and Candida albicans fungal (ATCC10231) with PVC pieces in Tris-buffered saline. BF formation was examined at 2, 6, 12, 24, 48, and 72 h of co-culture. Thickness of these BFs and the number, and percentage of viable cells in BFs were measured. CT scan images of BFs were obtained using CLSM and SEM and reconstructed 3D images of mixed species BF were acquired, in an effort to examine structure of the BF. Staphylococcus epidermidis attached to various forms of candida albicans (spores, pseudohyphae, and hyphae), formed complex and dense mesh arrays. The BF is constituted of a large number of viable and dead pathogens, the surface of mixed species BF is uneven, with living pathogens predominating protrusive portions and dead pathogens aggregating in concaves. Mixed species BF formation on the surface of PVC material was found to be a dynamic process, with rapid growth being at 24 h of co-culture, maximal thickness peaked at 48 h. These mixed species BF matured at 48-72 h. Significant differences were observed in the proportion of viable cells between interior, middle, and outer layers of BFs (p < 0.05). Mixed species BF Candida albicans-Staphylococcus epidermidis is sophisticated in structure. The combined approach involving CLSM, SEM, and 3D image reconstruction technique is ideal for the investigation of mixed species BF on PVC material.

The thermochemical processes of lignocellulosic biomass and its mixtures with poly(vinyl chloride) (PVC) fractions were investigated by thermogravimetric analysis in CO2 atmosphere. Superposition property was assumed to examine whether and/or to what extent interactions occurred during the mixture decomposition. Results showed that interactions existed, of which the intensities changed with reaction stage, heating rate and PVC quantity, and they actively behaved toward the decomposition in most cases. With PVC presence, lignocellulosic biomass turned from three-stage to four-stage decomposition process where the reactions occurred at lower temperatures with heightened intensity, especially in the first stage. The measured activation energies calculated by Ozawa-Flynn-Wall and Vyazovkin methods were of minor difference <5 kJ/mol, and comparing them between materials in each stage confirmed the results of interaction impact. This work provides a theoretical basis bringing about the possibilities of recycling CO2 into a reaction medium of thermo-treatment of lignocellulosic material with PVC contaminants., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Polyvinylidene chloride (PVDC) is a long chain carbon synthetic polymer. The objective of this study was to improve the bioactivity of PVDC films through surface modification using argon (Ar) ion bombardment to create Ar-modified PVDC films (Ar-PVDC) to address the clinical problems of guided bone regeneration (GBR), which is technique-sensitive, and low bone regenerative ability. First, the effects of Ar ion bombardment, a low temperature plasma etching technique widely used in industry, on PVDC film wettability, surface chemistry, and morphology were confirmed. Next, fibroblast-like and osteoblast-like cell attachment and proliferation on Ar-PVDC were assessed. As a preclinical in vivo study, Ar-PVDC was used to cover a critical-sized bone defect on rat calvaria and osteoconductivity was evaluated by micro-computed tomography analysis and histological examinations. We found that the contact angle of PVDC film decreased by 50° because of the production of -OH groups on the PVDC film surface, though surface morphological was unchanged at 30 min after Ar ion bombardment. We demonstrated that cell attachment increased by about 40% and proliferation by more than 140% because of increased wettability, and 2.4 times greater bone regeneration was observed at week 3 with Ar-PVDC compared with untreated PVDC films. These results suggest that Ar ion bombardment modification of PVDC surfaces improves osteoconductivity, indicating its potential to increase bone deposition during GBR.

Due to their susceptibility to bacterial biofilm formation, commercial tubes for medical use are one of the main sources of hospital infections with Acinetobacter baumannii. The anti-biofouling activity of novel composites against the clinical isolate of the multi-drug resistant A. baumannii is reported here. The composites were prepared by addition of micronised silver-exchanged natural zeolite (Ag-NZ) into poly(vinyl chloride) (PVC), followed by coating of the composites with D-Tyrosine (D-Tyr). The Ag-NZ composites (containing 1-15 wt% of Ag-NZ) coated with D-Tyr (Ag-NZ-Tyr) showed a bactericidal effect (100% or a 6.9 log CFU reduction) towards immobilised bacterial cells. The uncoated Ag-NZ composites showed a reduction of up to 70% (4.4 log CFU) of immobilised bacteria in comparison with the original PVC. Rheological testing of the composites revealed that the addition of Ag-NZ slightly affected processability and formability of the PVC and increased the elasticity of the polymer matrix.

When immersed in seawater, substrates are rapidly colonized by both micro- and macroorganisms. This process is responsible for important economic and ecological prejudices, particularly when related to ship hulls or aquaculture nets. Commercial antifouling coatings are supposed to reduce biofouling, i.e., micro- and macrofoulers. In this study, biofilms that primarily settled on seven different coatings (polyvinyl chloride [PVC], a fouling release coating [FRC], and five self-polishing copolymer coatings [SPC], including four commercial ones) were quantitatively studied, after 1 month of immersion in summer in the Toulon Bay (Northwestern Mediterranean Sea, France), by using flow cytometry (FCM), microscopy, and denaturing gradient gel electrophoresis. FCM was used after a pretreatment to separate cells from the biofilm matrix, in order to determine densities of heterotrophic bacteria, picocyanobacteria, and pico- and nanoeukaryotes on these coatings. Among diatoms, the only microphytobenthic class identified by microscopy, Licmophora, Navicula, and Nitzschia were determined to be the dominant taxa. Overall, biocide-free coatings showed higher densities than all other coatings, except for one biocidal coating, whatever the group of microorganisms. Heterotrophic bacteria always showed the highest densities, and diatoms showed the lowest, but the relative abundances of these groups varied depending on the coating. In particular, the copper-free SPC failed to prevent diatom settlement, whereas the pyrithione-free SPC exhibited high picocyanobacterial density. These results highlight the interest in FCM for antifouling coating assessment as well as specific selection among microbial communities by antifouling coatings., (Copyright © 2014, American Society for Microbiology. All Rights Reserved.)

There has been a significant and growing concern over nosocomial medical device infections. Previous studies have demonstrated that embedding nanoparticles alone (specifically, zinc oxide [ZnO]) in conventional polymers (eg, polyvinyl chloride [PVC]) can decrease bacteria growth and may have the potential to prevent or disrupt bacterial processes that lead to infection. However, little to no studies have been conducted to determine mammalian cell functions on such a nanocomposite material. Clearly, for certain medical device applications, maintaining healthy mammalian cell functions while decreasing bacteria growth is imperative (yet uncommon). For this reason, in the presented study, ZnO nanoparticles of varying sizes (from 10 nm to >200 nm in diameter) and functionalization (including no functionalization to doping with aluminum oxide and functionalizing with a silane coupling agent KH550) were incorporated into PVC either with or without ultrasonication. Results of this study provided the first evidence of greater fibroblast density after 18 hours of culture on the smallest ZnO nanoparticle incorporated PVC samples with dispersion aided by ultrasonication. Specifically, the greatest amount of fibroblast proliferation was measured on ZnO nanoparticles functionalized with a silane coupling agent KH550; this sample exhibited the greatest dispersion of ZnO nanoparticles. Water droplet tests showed a general trend of decreased hydrophilicity when adding any of the ZnO nanoparticles to PVC, but an increase in hydrophilicity (albeit still below controls or pure PVC) when using ultrasonication to increase ZnO nanoparticle dispersion. Future studies will have to correlate this change in wettability to initial protein adsorption events that may explain fibroblast behavior. Mechanical tests also provided evidence of the ability to tailor mechanical properties of the ZnO/PVC nanocomposites through the use of the different ZnO nanoparticles. Coupled with previous antibacterial studies, the present study demonstrated that highly dispersed ZnO/PVC nanocomposite materials should be further studied for numerous medical device applications.

Inadequate products, waste management, and policy are struggling to prevent plastic waste from infiltrating ecosystems [1, 2]. Disintegration into smaller pieces means that the abundance of micrometer-sized plastic (microplastic) in habitats has increased [3] and outnumbers larger debris [2, 4]. When ingested by animals, plastic provides a feasible pathway to transfer attached pollutants and additive chemicals into their tissues [5-15]. Despite positive correlations between concentrations of ingested plastic and pollutants in tissues of animals, few, if any, controlled experiments have examined whether ingested plastic transfers pollutants and additives to animals. We exposed lugworms (Arenicola marina) to sand with 5% microplastic that was presorbed with pollutants (nonylphenol and phenanthrene) and additive chemicals (Triclosan and PBDE-47). Microplastic transferred pollutants and additive chemicals into gut tissues of lugworms, causing some biological effects, although clean sand transferred larger concentrations of pollutants into their tissues. Uptake of nonylphenol from PVC or sand reduced the ability of coelomocytes to remove pathogenic bacteria by >60%. Uptake of Triclosan from PVC diminished the ability of worms to engineer sediments and caused mortality, each by >55%, while PVC alone made worms >30% more susceptible to oxidative stress. As global microplastic contamination accelerates, our findings indicate that large concentrations of microplastic and additives can harm ecophysiological functions performed by organisms., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

One mechanism of the failure of blood-contacting devices is clotting. Nitric oxide (NO) releasing materials are seen as a viable solution to the mediation of surface clotting by preventing platelet activation; however, NO's involvement in preventing clot formation extends beyond controlling platelet function. In this study, we evaluate NO's effect on factor XII (fibrinogen) adsorption and activation, which causes the initiation of the intrinsic arm of the coagulation cascade. This is done by utilizing a model plasticized poly(vinyl) chloride (PVC), N-diazeniumdiolate system and looking at the adsorption of fibrinogen, an important clotting protein, to these surfaces. The materials have been prepared in such a way to eliminate changes in surface properties between the control (plasticized PVC) and composite (NO-releasing) materials. This allows us to isolate NO release and determine the effect on the adsorption of fibrinogen, to the material surface. Surprisingly, it was found that an NO releasing material with a surface flux of 17.4 ± 0.5 × 10(-10) mol NO cm(-2) min(-1) showed a significant increase in the amount of fibrinogen adsorbed to the material surface compared to one with a flux of 13.0 ± 1.6 × 10(-10) mol NO cm(-2) min(-1) and the control (2334 ± 496, 226 ± 99, and 103 ±31% fibrinogen adsorbed of control, respectively). This study suggests that NO's role in controlling clotting is extended beyond platelet activation., (Copyright © 2013 Wiley Periodicals, Inc.)

This paper reports the results of an in vitro investigation into the blood response of medical grade poly (vinyl chloride) (PVC), and two types of plasticized PVC in tubing or sheet form, with di-(2-ethylhexyl)phthalate (DEHP) and di(isononyl) cyclohexane-1,2-dicarboxylate (HEXAMOLL(®) DINCH) as plasticizer, were selected for assessment of complement activation, coagulation system and platelet activation. The results of the study show that not only the plasticizers at PVC surface have an influence on complement activation, but also the incubation condition such as incubation time and the diameter of PVC tubing. Under static status, C3a, C5a and SC5b-9 concentration in the blood were higher after contacting with PVC plasticized with DEHP (PVC1) than after contacting with PVC plasticized with DINCH (PVC2). However, under dynamic circulation, the results were totally converse, which may be due to smaller diameter and higher shear rate of PVC2. In addition, there was a significant increase of activated partial thrombin time (APTT) and decrease of FIX concentration after plasma contacting with the PVC tubing, which indicated that the intrinsic pathway may be impacted when blood contacted with PVC tubing. However, there was no significant difference of APTT, FIX concentration and CD62p expression rate between the two materials. Moreover, the migration in the DINCH system was considerably lower than for DEHP, which indicates that DINCH could be a promising alterative plasticizer of DEHP.

Disease-causing bacteria of the genus Aeromonas are able to adhere to pipe materials, colonizing the surfaces and forming biofilms in water distribution systems. The aim of our research was to study how the modification of materials used commonly in the water industry can reduce bacterial cell attachment. Polyvinyl chloride and silicone elastomer surfaces were activated and modified with reactive organo-silanes by coupling or co-crosslinking silanes with the native material. Both the native and modified surfaces were tested using the bacterial strain Aeromonas hydrophila, which was isolated from the Polish water distribution system. The surface tension of both the native and modified surfaces was measured. To determine cell viability and bacterial adhesion two methods were used, namely plate count and luminometry. Results were expressed in colony-forming units (c.f.u.) and in relative light units (RLU) per cm(2). Almost all the chemically modified surfaces exhibited higher anti-adhesive and anti-microbial properties in comparison to the native surfaces. Among the modifying agents examined, poly[dimethylsiloxane-co-(N,N-dimethyl-N-n-octylammoniopropyl chloride) methylsiloxane)] terminated with hydroxydimethylsilyl groups (20 %) in silicone elastomer gave the most desirable results. The surface tension of this modifier, was comparable to the non-polar native surface. However, almost half of this value was due to the result of polar forces. In this case, in an adhesion analysis, only 1 RLU cm(-2) and less than 1 c.f.u. cm(-2) were noted. For the native gumosil, the results were 9,375 RLU cm(-2) and 2.5 × 10(8) c.f.u. cm(-2), respectively. The antibacterial activity of active organo-silanes was associated only with the carrier surface because no antibacterial compounds were detected in liquid culture media, in concentrations that were able to inhibit cell growth.

Endothelial cells lining the lumen of blood vessels serve as a physiological barrier controlling nanoparticle movement from the vasculature into the tissue. For exploring the effect of polymer hydrophilicity on nanoparticle interactions with human umbilical vein endothelial cells (HUVECs) in vitro, a series of monomodal poly[acrylonitrile-co-(N-vinylpyrrolidone)] model nanoparticles with increasing hydrophilicity as related to their increasing content (0-30 mol.%) of N-vinylpyrrolidone (NVP) were synthesized by miniemulsion polymerization. Nanoparticles with a low NVP content were rapidly endocytized into all cells independent from the particle dose with toxic effects only observed at high particle concentrations, while only 10-30% of the cells incorporated particles with ≥20 mol.% NVP. Since pathologies are often related to inflammation, an inflammatory HUVEC culture condition with IL-1β stimulation has been introduced and suggested to be widely applied for studying nanocarriers, since cellular uptake in this assay was clearly increased for NVP contents ≥20 mol.%. Importantly, the secretion of functional biological mediators by HUVECs was not relevantly influenced by the nanoparticles for both homeostatic and inflammatory conditions. These findings may motivate concepts for nanocarriers specifically targeted to pathologic regions. Additionally, rapidly endocytized RhodaminB loaded particles with low NVP content may be explored for cell labeling and tracking., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Mechanisms of Escherichia coli attachment on biofilms grown on PVC coupons were investigated. Biofilms were grown in CDC reactors using groundwater as feed solution over a period up to 27 weeks. Biofilm physical structure was characterized at the micro- and meso-scales using Scanning Electron Microscopy (SEM) and Optical Coherence Tomography (OCT), respectively. Microbial community diversity was analyzed with Terminal Restricted Fragment Length Polymorphism (T-RFLP). Both physical structure and microbial community diversity of the biofilms were shown to be changing from 2 weeks to 14 weeks, and became relatively stable after 16 weeks. A parallel plate flow chamber coupled with an inverted fluorescent microscope was also used to monitor the attachment of fluorescent microspheres and E. coli on clean PVC surfaces and biofilms grown on PVC surfaces for different ages. Two mechanisms of E. coli attachment were identified. The adhesion rate coefficients (kd) of E. coli on nascent PVC surfaces and 2-week biofilms increased with ionic strength. However, after biofilms grew for 8 weeks, the adhesion was found to be independent of solution chemistry. Instead, a positive correlation between kd and biofilm roughness as determined by OCT was obtained, indicating that the physical structure of biofilms could play an important role in facilitating the adhesion of E. coli cells., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In hospitals and clinics worldwide, medical device surfaces have become a rapidly growing source of nosocomial infections. In particular, patients requiring mechanical ventilation (and, thus, intubation with an endotracheal tube) for extended lengths of time are faced with a high probability of contracting ventilator-associated pneumonia. Once inserted into the body, the endotracheal tube provides a surface to which bacteria can adhere and form a biofilm (a robust, sticky matrix that provides protection against the host immune system and antibiotic treatment). Adding to the severity of this problem is the spread of bacterial genetic tolerance to antibiotics, in part demonstrated by the recent and significant increase in the prevalence of methicillin-resistant Staphylococcus aureus. To combat these trends, different techniques in biomaterial design must be explored. Recent research has shown that nanomaterials (materials with at least one dimension less than 100 nm) may have the potential to prevent or disrupt bacterial processes that lead to infections. In this study, polyvinyl chloride (PVC) taken from a conventional endotracheal tube was embedded with varying concentrations of zinc oxide (ZnO) nanoparticles. S. aureus biofilms were then grown on these nanocomposite surfaces during a 24-hour culture. Following this, biofilms were removed from the surfaces and the number of colony forming units present was assessed. Bacterial proliferation on the samples embedded with the highest concentration of ZnO nanoparticles was 87% less when compared to the control, indicating that this technique is effective at reducing biofilm formation on PVC surfaces without the use of antibiotics.

N,N-Dimethyl-N'-(6-oxo-2-thioxo-1H-pyrimidine-4-yl)formamidine has been synthesized and introduced as a substituent in poly(vinyl chloride) (PVC) chains via a chemical reaction. Both the dimethyl derivative and the modified PVC have been characterized via spectroscopic analyses and their biological activities have been evaluated. Both IR and (1) H NMR spectral data confirm the incorporation of the newly prepared bioactive dimethyl pyrimidine derivative in the polymeric chains. The dimethyl pyrimidine derivative has exhibited good antibacterial and antifungal activities. The modified PVC shows higher antibacterial effects than that of the blank one. Photostabilizing efficiency of the modified PVC is determined by measuring the changes that occurred in the molecular weights of modified PVC samples after UV irradiation using the gel permeation chromatography technique. The extent of discoloration of the photodegraded modified PVC samples has also been measured. The results have been compared with that of the blank PVC and that of the PVC stabilized with phenyl salicylate as a reference UV absorber. The lower decrease in the values of weight average molecular weight, M(w) , at the first stages of UV irradiation and the absence of crosslinking at the latter stages of irradiation confirms the photostability of the modified PVC. The extent of discoloration of the modified sample is also decreased when compared with the blank and stabilized PVC samples., (Copyright © 2012 Wiley Periodicals, Inc.)

Objective: To explore the influence of three central venous catheter biomedical materials (polyurethane, silicone, and polyvinyl chloride) on the proliferation, apoptosis, and cell cycle of Xuanwei Lung Cancer-05 (XWLC-05) cells so as to provide the basis for clinical choice of central venous catheter., Methods: XWLC-05 cells were cultured and subcultured, and the cells at passage 3 were cultured with polyurethane, silicone, and polyvinyl chloride (1.0 cm x 1.0 cm in size), and only cells served as a control. At 24, 48, and 72 hours after cultured, MTT assay was used to detect the cellular proliferation and flow cytometry to detect the cell cycle and apoptosis. At 72 hours after cultured, inverted microscope was used to observe the cell growth., Results: Inverted microscope showed the cells grew well in control group, polyurethane group, and silicone group. In polyvinyl chloride group, the cells decreased, necrosed, and dissolved; residual adherent cells had morphologic deformity and decreased transmittance. At 24 and 48 hours, no significant difference in proliferation, apoptosis, and cell cycle was found among 4 groups (P > 0.05). At 72 hours, the proliferations of XWLC-05 cells in three material groups were significantly inhibited when compared with control group (P < 0.05), and the cells in polyvinyl chloride group had more significant proliferation inhibition than polyurethane group and silicone group (P < 0.05), but there was no signifcant difference in proliferation inhibition between polyurethane group and silicone group (P > 0.05). Compared with the control group, three material groups had significant impact on the rate of apoptosis and cell cycle: polyvinyl chloride group was the most remarkable, followed by silicone group, polyurethane group was minimum (P < 0.05)., Conclusion: Polyvinyl chloride can significantly impact the proliferation, apoptosis, and cell cycle of XWLC-05 cells; polyurethane has better biocompatibility than polyvinyl chloride and silicone.

This study was designed to investigate the individual and combined effects of steam and lactic acid (LA) on the inactivation of biofilms formed by Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on polyvinyl chloride (PVC) and stainless steel. Six day old biofilms were developed on PVC and stainless steel coupons by using a mixture of three strains each of three foodborne pathogens at 25°C. After biofilm development, PVC and stainless steel coupons were treated with LA alone (immersed in 0.5% or 2% for 5s, 15s, and 30s), steam alone (on both sides for 5, 10, and 20s), and the combination of steam and LA. The numbers of biofilm cells of the three foodborne pathogens were significantly (p<0.05) reduced as the amount of LA and duration of steam exposure increased. There was a synergistic effect of steam and LA on the viability of biofilm cells of the three pathogens. For all biofilm cells of the three foodborne pathogens, reduction levels of individual treatments ranged from 0.11 to 2.12 log CFU/coupon. The combination treatment of steam and LA achieved an additional 0.2 to 2.11 log reduction compared to the sum of individual treatments. After a combined treatment of immersion in 2% LA for 15s or 30s followed by exposure to steam for 20s, biofilm cells of the three pathogens were reduced to below the detection limit (1.48 log). From the results of this study, bacterial populations of biofilms on PVC coupons did not receive the same thermal effect as on stainless steel coupons. Effectiveness of steam and LA may be attributed to the difference between Gram-negative and Gram-positive characteristics of the bacteria studied. The results of this study suggest that the combination of steam and LA has potential as a biofilm control intervention for food processing facilities., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The aim of the study was to establish an in vitro model of Staphylococcus epidermidis biofilms on polyvinyl chloride (PVC) material, and to investigate bacterial biofilm formation and its structure using the combined approach of confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM). Staphylococcus epidermidis bacteria (stain RP62A) were incubated with PVC pieces in Tris buffered saline to form biofilms. Biofilm formation was examined at 6, 12, 18, 24, 30, and 48 h. Thicknesses of these biofilms and the number, and percentage of viable cells in biofilms were measured. CT scan images of biofilms were obtained using CLSM and environmental SEM. The results of this study showed that Staphylococcus epidermidis biofilm is a highly organized multi-cellular structure. The biofilm is constituted of large number of viable and dead bacterial cells. Bacterial biofilm formation on the surface of PVC material was found to be a dynamic process with maximal thickness being attained at 12-18 h. These biofilms became mature by 24 h. There was significant difference in the percentage of viable cells along with interior, middle, and outer layers of biofilms (P < 0.05). Staphylococcus epidermidis biofilm is sophisticated in structure and the combination method involving CLSM and SEM was ideal for investigation of biofilms on PVC material.

Biocompatible synthetic polymers are largely used in the bio-medical domain, tissue engineering and in controlled release of medicines. Polymers can be used in the achievement of cardiac and vascular devices, mammary implants, eye lenses, surgical threads, nervous conduits, adhesives, blood substitutes, etc. Our study was axed on the development of cytotoxicity tests for 3 synthetic polymers, namely polyvinyl alcohol, polyethylene glycol and polyvinyl chloride. These tests targeted to determine the viability and morphology of cells (fibroblasts) that were in indirect contact with the studied polymers. Cell viability achieved for all the studied synthetic polymers allowed their frame in biocompatible material category. Cell morphology did not significantly change, thus accomplishing a new biocompatibility criterion. The degree of biocompatibility of the studied polymers varied. Polyvinyl alcohol presented the highest grade of biocompatibility and polyvinyl chloride placed itself at the lowest limit of biocompatibility. The results achieved allowed the selection of those polymers that (by enhancing their degrees of biocompatibility due to the association with various biopolymers) will be used in the development of new biocompatible materials, useful in nervous conduits manufacture.

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with different chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% +/- 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% +/- 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could effectively remove the foulants accumulated on the membrane surface.

Nanoparticles of ZnO and their application in coating systems have attracted a great deal of attention in recent years because of its multifunction property, especially antibacterial activity. In this study, antibacterial and physical properties of poly(vinyl chloride) (PVC) based film coated with ZnO nanoparticles were investigated. It was found that the antibacterial action should be attributed to the killing effect property of ZnO nanoparticles. The ZnO-coated films treated by shaking for 10 h exhibited a similar high antibacterial activity against Escherichia coli and Staphylococcus aureus as the untreated ZnO-coated films. This result indicated that the ZnO nanoparticles adhered very well to the plastic film. The antibacterial activity of the ZnO-coated film to inactivate E. coli or S. aureus was improved by UV irradiation. The analysis of physical properties of the ZnO-coated films revealed that the nano-ZnO particles showed less effects on the tensile strength and elongation at break of the film. The ultraviolet (UV) light fastness of the ZnO-coated PVC film was improved, which may be attributed to the absorption of ZnO nanoparticles against UV light. Water vapor transmission of the ZnO-coated film decreased from 128 to 85 g/m(2) · 24 h, whereas the thickness of film increased from 6.0 μm with increasing the amount of nano-ZnO particles coated from 0 to 187.5 μg/cm(2). This research revealed that the PVC film coated with nano-ZnO particles has a good potential to be used as an active coating system for food packaging.

Nitric oxide (NO) has been shown to reduce thrombogenicity by decreasing platelet and monocyte activation by the surface glycoprotein, P-selectin and the integrin, CD11b, respectively. In order to prevent platelet and monocyte activation with exposure to an extracorporeal circulation (ECC), a nitric oxide releasing (NORel) polymeric coating composed of plasticized polyvinyl chloride (PVC) blended with a lipophilic N-diazeniumdiolate was evaluated in a 4 h rabbit thrombogenicity model using flow cytometry. The NORel polymer significantly reduced ECC thrombus formation compared to polymer control after 4 h blood exposure (2.8 +/- 0.7 NORel vs 6.7 +/- 0.4 pixels/cm(2) control). Platelet count (3.4 +/- 0.3 NORel vs 2.3 +/- 0.3 x 10(8)/ml control) and function as measured by aggregometry (71 +/- 3 NORel vs 17 +/- 6% control) were preserved after 4 h exposure in NORel versus control ECC. Plasma fibrinogen levels significantly decreased in both NORel and control groups. Platelet P-selectin mean fluorescence intensity (MFI) as measured by flow cytometry was attenuated after 4 h on ECC to ex vivo collagen stimulation (27 +/- 1 NORel vs 40 +/- 2 MFI control). Monocyte CD11b expression was reduced after 4 h on ECC with NORel polymer (87 +/- 14 NORel vs 162 +/- 30 MFI control). These results suggest that the NORel polymer coatings attenuate the increase in both platelet P-selectin and monocytic CD11b integrin expression in blood exposure to ECCs. These NO-mediated platelet and monocytic changes were shown to improve thromboresistance of these NORel-polymer-coated ECCs for biomedical devices., (2009 Elsevier Ltd. All rights reserved.)

Medical-grade polyvinyl chloride was coated by polysaccharides through a novel physicochemical approach. An initial surface activation was performed foremost via diffuse coplanar surface barrier discharge plasma in air at ambient temperature and pressure. Then, radical graft copolymerization of acrylic acid through grafting-from pathway was directed to render a well-defined brush of high density, and finally a chitosan monolayer and chitosan/pectin alternating multilayer were bound onto the functionalized surfaces. Surface characteristics were systematically investigated using several probe techniques. In vitro bacterial adhesion and biofilm formation assays indicated that a single chitosan layer was incapable of hindering the adhesion of a Staphylococcus aureus bacterial strain, while up to 30% reduction was achieved by the chitosan/pectin layered assembly. On the other hand, chitosan and chitosan/pectin multilayer could retard Escherichia coli adhesion by 50% and 20%, respectively. Furthermore, plasma treated and graft copolymerized samples were also found effective to diminish the degree of adherence of Escherichia coli.

The objective of the present study was to investigate the toxicity of silver nanoparticles (Ag NPs) in vitro. Silver ions (Ag+) have been used in medical treatments for decades whereas Ag NPs have been used in a variety of consumer products within recent years. This study was undertaken to compare the effect of well characterized, PVP-coated Ag NPs (69 nm +/- 3 nm) and Ag+ in a human monocytic cell line (THP-1). Characterization of the Ag NPs was conducted in both stock suspension and cell media with or without serum and antibiotics. By using the flowcytometric annexin V/propidium iodide (PI) assay, both Ag NPs and Ag+ were shown to induce apoptosis and necrosis in THP-1 cells depending on dose and exposure time. Furthermore, the presence of apoptosis could be confirmed by the TUNEL method. A number of studies have implicated the production of reactive oxygen species (ROS) in cytotoxicity mediated by NPs. We used the fluorogenic probe, 2',7'-dichlorofluorescein to assess the levels of intracellular ROS during exposure to Ag NPs and Ag+. A drastic increase in ROS levels could be detected after 6-24h suggesting that oxidative stress is an important mediator of cytotoxicity caused by Ag NPs and Ag+.

Heparin has traditionally been a widely used anticoagulant in blood research, but has been shown to be inappropriate for work with the complement system because of its complement-interacting properties. In this work, we have compared the effects of heparin with those of the specific thrombin inhibitor hirudin on complement and blood cells in vitro. Whole blood collected in the presence of hirudin (50 microg/mL) or heparin (1 IU/mL) was incubated in the slide chamber model. The plasma was analyzed for complement activation markers C3a and sC5b-9, and the polyvinylchloride test slides were stained for adhering cells. The integrity of the complement system was tested by incubating serum and hirudin-treated plasma in the presence of various activating agents. In contrast to heparin, the addition of hirudin generally preserved the complement reactivity, and complement activation in hirudin plasma closely resembled that in normal serum. Importantly, immunochemical staining of surface-bound cells demonstrated the inducible expression of tissue factor on bound monocytes from hirudin-treated blood, an effect that was completely abolished in heparin-treated blood. Our results indicate that hirudin as an anticoagulant produces more physiological conditions than heparin, making hirudin well-suited for in vitro studies, especially those addressing the regulation of cellular processes., (Copyright 2008 Wiley Periodicals, Inc.)

The surface nitrile groups of solvent-cast polyacrylonitrile-co-vinyl chloride (PAN-VC) films were converted into amidine groups through a two-step process analogous to Pinner's method of 1877. The amidine groups were hypothesized to reduce platelet adhesion and activation through the inhibition of the classical complement pathway, as was noted for benzamidine and pentamidine in earlier studies. A slightly higher nitrogen content was detected on the amidine-surface modified (ASM) samples by X-ray photoelectron spectroscopy relative to the solvent-treated and unmodified controls. Reaction with pentafluoroaldehyde resulted in increased fluorine and decreased nitrogen contents (relative), consistent with the formation of a Schiff base with the primary nitrogen of the amidine on ASM PAN-VC surface. The corresponding yield was 17.2% based on nitrile groups and 9.6% based on all repeating units of the base polymer. Despite this low degree of amidine modification, platelet adhesion was approximately 40% lower on the amidine-modified film compared to the solvent-treated and unmodified controls. The scanning electron micrographs also showed less activation in the adherent platelets. A small reduction in C1s binding was also noted on the amidine-modified surface. Taken together, these results support the notion that amidine modification may be a useful approach to improve the nonthrombogenicity of a biomaterial. However, much effort is required to improve the degree of surface modification and to provide unequivocal evidence linking amidines to the improved thrombogenicity., (2008 Wiley Periodicals, Inc.)

Cytokines, chemokines, and growth factors were analyzed periodically over eight weeks from the wound exudate fluid surrounding biomaterials implanted subcutaneously within stainless steel mesh cages. TNF-alpha, MCP-1, MIP-1alpha, IL-2, IL-6, IL-1beta, VEGF, IL-4, and IL-10 were measured from exudate samples collected from cages containing specimens of polyethylene (PE), polyurethane (PU), or organotin polyvinyl chloride (ot-PVC). Empty cages served as negative controls, and lipopolysaccharide (LPS) served as a positive control. Cytokine, chemokine, and growth factor concentrations decreased from the time of implantation to eight weeks post-implantation, and there was an overall increase in cytokine, chemokine, and growth factor production for material-containing cages compared to empty cages. However, cytokine production was only modestly affected by the different surface chemistries of the three implanted polymeric materials.

Nanostructured materials with various methods of coating have antimicrobial activity and can be used in creation of biologically active systems with a given medical-biological characteristics. Use of organic derivatives of fullerene S60 as a new class of biologically active compounds and their use is a new and promising direction in this area, providing a selective effect on the micro-organisms of different species. Using probes with the biologically active nanostructured surfaces useful for the correction of pH-dependent states, such as the translocation of microflora in the intestine when postgastrectomical states may have to correct with GERD. Programmable output regulators of activity of intestinal microbiota can be viewed as a way of normalizing the digestive-transport processes in the intestine.

Exposing blood to an artificial surface results in a systemic inflammatory response, including cytokine release and complement activation. We studied the artificial surface-induced inflammation in human whole blood using an extensive panel of inflammatory mediators including proinflammatory cytokines, chemokines and growth-factors and investigated the role of the complement system in the induction of this response. Using multiplex technology, 27 different inflammatory mediators were measured after circulating blood for 4 hours in polyvinyl chloride tubing. The C3 inhibitor compstatin was used to block complement activation. A significant (p < 0.05) increase in 14 of the 27 mediators was induced by the surface, of which 7 were chemokines (IL-8, MCP-1, MIP-1alpha, MIP-1beta, RANTES, eotaxin and IP-10) and 5 were growth-factors (G-CSF, GM-CSF, VEGF, PDGF and FGF). The traditional proinflammatory cytokines like IL-1beta, TNFalpha and IL-6 were not induced, although IL-6, as well as IL-15 and IL-17 increased if the surface was coated with highly bioincompatible laminaran. Inhibition of complement activation with compstatin significantly (p < 0.05) reduced the formation of 12 of the 14 mediators. For 10 of the 12 mediators, the inhibition was by 2/3 or more, for the remaining two the inhibition was more moderate. A highly biocompatible heparin-coated PVC surface was used as negative control and completely abolished the whole inflammatory response. The artificial surface PVC markedly induced a broad spectrum of chemokines and growth-factors, which was largely dependent on activation of complement.

The development of a nonthrombogenic artificial surface for use with indwelling sensors or catheters remains an elusive goal despite decades of ongoing research. In vivo studies are both labor intensive and costly, and are therefore an inefficient way to rapidly screen possible surface materials. The following in vitro model used glass, polyvinyl chloride (PVC), and polypropylene test tubes incubated with 111In-labeled rabbit platelets and illustrated that, despite equivalent platelet count and function, platelet adhesion was greatest on glass (n = 13), with PVC (n = 17) at 67 +/- 8% and polypropylene (n = 13) at 43 +/- 5% when compared with glass. Extrapolating this method by coating test tubes with new, nonthrombogenic materials is a quick and reliable way to screen material before embarking upon more lengthy in vivo animal studies.

Method of transplantation of hemopoietic cells is proposed for acceleration of recovery of damaged tissue structures. The morphogenetic effect of transplantation depended on the state of damaged tissue and was determined by not only hemopoietic stem cells, but also lymphocytes, macrophages, and mast cells.