Search

Acute respiratory failure can cause profound hypoxaemia that leads to organ injury or death within minutes. When conventional interventions are ineffective, the intravenous administration of oxygen can rescue patients from severe hypoxaemia, but at the risk of microvascular obstruction and of toxicity of the carrier material. Here we describe polymeric microbubbles as carriers of high volumes of oxygen (350-500 ml of oxygen per litre of foam) that are stable in storage yet quickly dissolve following intravenous injection, reverting to their soluble and excretable molecular constituents. In swine with profound hypoxaemia owing to acute and temporary (12 min) upper-airway obstruction, the microbubble-mediated delivery of oxygen led to: the maintenance of critical oxygenation, lowered burdens of cardiac arrest, improved survival, and substantially improved neurologic and kidney function in surviving animals. Our findings underscore the importance of maintaining a critical threshold of oxygenation and the promise of injectable oxygen as a viable therapy in acute and temporary hypoxaemic crises., Competing Interests: Competing interests: B.D.P., J.N.K. and Y.P. are inventors on a patent (US11147890B2, United States, 2018) related to the technology described in this article. The other authors declare no competing interests., (© 2024. The Author(s).)

Background: Normothermic ex situ perfusion of vascularized composite allografts (VCAs) necessitates high oxygen demand and, thus, increased metabolic activity, which, in turn, requires the use of blood-based perfusion solutions. However, blood-derived perfusates, in turn, constitute an antigenic load. To circumvent this immunogenic problem, we used a perfusate enriched with acellular dextrane oxygen microcarriers to perfuse rat hindlimbs., Methods: Rat hindlimbs (n = 11) were perfused with either (non-), oxygenated dextrane-enriched Phoxilium, or Phoxilium enriched with dextrane oxygen microcarriers (MO 2 ) for 12 h at 37 °C or stored on ice. Oxygenation of the skeletal muscle was assessed with Raman spectroscopy, tissue pO 2 -probes, and analysis of the perfusate. Transmission electronic microscopy was utilized to assess the ultrastructure of mitochondria of the skeletal muscle., Results: For all evaluated conditions, ischemia time until perfusion was comparable (22.91 ± 1.64 min; p = 0.1559). After 12 h, limb weight increased significantly by at least 81%, up to 124% in the perfusion groups, and by 27% in the static cold storage (SCS) group. Raman spectroscopy signals of skeletal muscle did not differ substantially among the groups during either perfusion or static cold storage across the duration of the experiment. While the total number of skeletal muscle mitochondria decreased significantly compared to baseline, mitochondrial diameter increased in the perfusion groups and the static cold storage group., Conclusion: The use of oxygen microcarriers in ex situ perfusion of VCA with acellular perfusates under normothermic conditions for 12 h facilitates the maintenance of mitochondrial structure, as well as a subsequent recovery of mitochondrial redox status over time, while markers of muscle injury were lower compared to conventional oxygenated acellular perfusates.

Purpose: The aim of this work was to determine whether intratumoral injections of a liquid oxygen solution are effective at boosting radiation-induced abscopal effects., Methods and Materials: A liquid oxygen solution, comprising slow-release polymer-shelled oxygen microparticles, was fabricated and injected intratumorally to locally elevate tumor oxygen levels before and after treatment with radiation therapy. Changes in tumor volume were monitored. In a subset of studies, CD8-positive cells were depleted and the experiments were repeated. Histologic analyses of the tumor tissues were performed to quantify the concentration of infiltrating immune cells., Results: Daily intratumoral injections of oxygen-filled microparticles significantly retarded primary and secondary tumor growth, boosted infiltration of cytotoxic T cells, and improved overall survival when used as an adjuvant to radiation therapy. The findings also demonstrated that efficacy requires both radiation and oxygen, suggesting that they act synergistically to enhance in situ vaccination and systemic antitumor immune responses., Conclusions: This study demonstrated the potential advantages of intratumoral injections of a liquid oxygen solution as a strategy to boost radiation-induced abscopal effects, and the findings warrant future efforts toward clinical translation of the injectable liquid oxygen solution., (Copyright © 2023. Published by Elsevier Inc.)

Hypoxia and hypoxemia are the conditions when oxygen is depleted from the cell due to, for example, respiratory failure, cancer, etc. While the current therapy brought reasonable clinical outcomes, its systematic nature of oxygen delivery can be compromised by a significant dropout and side effects. This paper presents a totally implantable oxygen generator (TIOG) for localized, highly controllable, real-time, and targeted oxygen delivery., Methods: The TIOG system, an ultra-low power implantable wireless platform, is built using off-the-shelf components. The TIOG can be remotely operated to enable a tailored oxygen delivery based on electrolysis with a precisely controlled electrical signal (i.e., current level, frequency, and duty cycle)., Results: The in vitro experiments demonstrate that the TIOG could deliver oxygen with a rate of 9.27 ± 1.9 µmol/L/min with the pulsed electrical current (800 µA, 600 µs pulse or 6% duty cycle with 10 ms period). The system could also suppress chlorine generation under the safety guideline (5 mg/L). Operating at 433 MHz ISM band, the TIOG could be wirelessly controlled from up to 600 cm distance with a 0%-bit error rate (BER) and 0%-packet error rate (PER). A single charge of the battery could operate the system for up to 3.3 hr, which can be wirelessly recharged for long-term operation., Conclusion: The longevity of the TIOG system enables ambulatory oxygen therapy in a much longer-term than current practice.

Liquids with permanent microporosity can absorb larger quantities of gas molecules than conventional solvents 1 , providing new opportunities for liquid-phase gas storage, transport and reactivity. Current approaches to designing porous liquids rely on sterically bulky solvent molecules or surface ligands and, thus, are not amenable to many important solvents, including water 2-4 . Here we report a generalizable thermodynamic strategy to preserve permanent microporosity and impart high gas solubilities to liquid water. Specifically, we show how the external and internal surface chemistry of microporous zeolite and metal-organic framework (MOF) nanocrystals can be tailored to promote the formation of stable dispersions in water while maintaining dry networks of micropores that are accessible to gas molecules. As a result of their permanent microporosity, these aqueous fluids can concentrate gases, including oxygen (O 2 ) and carbon dioxide (CO 2 ), to much higher densities than are found in typical aqueous environments. When these fluids are oxygenated, record-high capacities of O 2 can be delivered to hypoxic red blood cells, highlighting one potential application of this new class of microporous liquids for physiological gas transport., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

SignificanceThe treatment of hypoxemia that is refractory to the current standard of care is time-sensitive and requires skilled caregivers and use of specialized equipment (e.g., extracorporeal membrane oxygenation). Most patients experiencing refractory hypoxemia will suffer organ dysfunction, and death is common in this cohort. Here, we describe a new strategy to stabilize and support patients using a microfluidic device that administers oxygen gas directly to the bloodstream in real time and on demand using a process that we call sequential shear-induced bubble breakup. If successful, the described technology may help to avoid or decrease the incidence of ventilator-related lung injury from refractory hypoxemia.

Over the past decade, there have been many attempts to engineer systems capable of delivering oxygen to overcome the effects of both systemic and local hypoxia that occurs as a result of traumatic injury, cell transplantation, or tumor growth, among many others. Despite progress in this field, which has led to a new class of oxygen-generating biomaterials, most reported techniques lack the tunability necessary for independent control over the oxygen flux (volume per unit time) and the duration of delivery, both of which are key parameters for overcoming tissue hypoxia of varying etiologies. Here, we show that these critical parameters can be effectively manipulated using hyperbarically-loaded polymeric microcapsules (PMC). PMCs are micron-sized particles with hollow cores and polymeric shells. We show that oxygen delivery through PMCs is dependent on its permeability through the polymeric shell, the shell thickness, and the pressure gradient across the shell. We also demonstrate that incorporating an intermediate oil layer between the polymeric shell and the gas core prevents rapid outgassing by effectively lowering the resultant pressure gradient across the polymeric membrane following depressurization., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The purpose of this work was to determine the safety of inhaled hydrogen gas in healthy animals. Female mice were exposed to medical air with or without hydrogen gas (concentration 2.4%) for 72 hours (n = 25 mice/group). Mice underwent a standardized and validated neurobehavioral examination, SmithKline Beecham, Harwell, Imperial College, Royal London Hospital, Phenotype Assessment (SHIRPA) protocol, prior to and following the exposure period. Blood was withdrawn for serologic evaluation and all major organ tissues were evaluated histologically. The average hydrogen concentration within the chamber was 2.27%. Following exposure, there was no significant change in body weight in either group. Similarly, there was no significant change in the total SHIRPA score, although hydrogen-treated mice exhibited significantly lower spontaneous locomotor activity (P < 0.0001) in a subset of the test; all other aspects of the mouse neurologic exam were normal in hydrogen-treated animals. Brain histopathology was also normal in all mice, as was the histology of all other major organs. There were no significant differences in complete blood count, serum chemistry, or arterial blood gases between control and hydrogen-treated mice (P > 0.05 for all). Hydrogen gas did not appear to cause significant adverse effects when administered to healthy mice for 72 hours, with the possible exception of decreased spontaneous locomotor activity. The study was approved by the Institutional Animal Care and Use Committee at Boston Children's Hospital, USA (approved number 18-01-3536) on January 25, 2018., Competing Interests: No authors disclose any conflicts of interest related to this work.

Introduction: Direct comparison of the effects of antiarrhythmic agents on myocardial performance may be useful in choosing between medications in critically ill patients. Studies directly comparing multiple antiarrhythmic medications are lacking. The use of an experimental heart preparation permits examination of myocardial performance under constant loading conditions., Methods: Hearts of Sprague Dawley rats (n = 35, 402-507 g) were explanted and cannulated in working heart model with fixed preload and afterload. Each heart was then exposed to a 3-hour infusion of procainamide (20 µg/kg/min), esmolol (100 or 200 µg/kg/min), amiodarone (10 or 20 mg/kg/d), sotalol (80 mg/m 2 /d), or placebo infusions (n = 5 per dose). Cardiac output, contractility (dP/dT max ), diastolic performance (dP/dT min ), and heart rate were compared between groups over time by linear mixed modeling., Results: Compared with placebo, sotalol decreased contractility by an average of 24% ( P < .001) over the infusion period, as did amiodarone (low dose by 13%, P = .029; high dose by 14%, P = .013). Compared with placebo, mean cardiac output was significantly lower in animals treated with sotalol (by 22%, P = .016) and esmolol 200 μg/kg/min (by 23%, P = .012). Over time, amiodarone decreased cardiac output (20 mg/kg/d, β = -89 [-144, -33] μL/min 2 decrease, P = .002) and also worsened diastolic function, decreasing dP/dT min by ∼18% and 22% ( P = .032 and P = .011, low and high doses, respectively). Procainamide did not have a significant effect on any measures of systolic or diastolic performance., Conclusions: In isolated hearts, amiodarone and sotalol depressed myocardial contractility, cardiac output, and diastolic function. However, procainamide did not negatively affect myocardial performance and represents a favorable agent in settings of therapeutic equivalence.

This study used a swine model of mildly hypothermic prolonged circulatory arrest and found that the addition of 2.4% inhaled hydrogen gas to inspiratory gases during and after the ischemic insult significantly decreased neurologic and renal injury compared with controls. With proper precautions, inhalational hydrogen may be administered safely through conventional ventilators and may represent a complementary therapy that can be easily incorporated into current workflows. In the future, inhaled hydrogen may diminish the sequelae of ischemia that occurs in congenital heart surgery, cardiac arrest, extracorporeal life-support events, acute myocardial infarction, stroke, and organ transplantation.

The ability to tailor acoustic cavitation of contrast agents is pivotal for ultrasound applications in enhanced imaging, drug delivery, and cancer therapy, etc. A biopolymer-based system of microbubbles and nanobubbles was developed as acoustic reporters that consist of extremely porous hard shells. Despite the existence of an incompressible shell, these porous contrast agents exhibited strong nonlinear acoustic response under very low acoustic pressure, e.g, harmonics, characteristic of free gas bubbles. The large air/water surface area within the transmural capillaries are believed to facilitate oscillation of the inner gas core. Furthermore, the acoustic cavitation can be tailored by variation in polymer structures. This synthetically based platform offers insight for the rational design of advanced acoustic biomaterials.

Background: Hyperoxemia (arterial oxygen tension >100 mm Hg) may occur in critically ill patients and have effects on mixed venous saturation (SvO 2 ) and on Fick-based estimates of cardiac output (CO). We investigated the effect of hyperoxemia on SvO 2 and on assessments of CO using the Fick equation., Methods: Yorkshire swine (n = 14) were anesthetized, intubated, and paralyzed for instrumentation. SvO 2 (co-oximetry) and tissue oxygen tension (tPO 2 , implantable electrodes) in brain and myocardium were measured during systematic manipulation of arterial oxygen tension (PaO 2 ) using graded hyperoxia (fraction of inspired oxygen 0.21 → 0.8). Secondarily, oxygen- and carbon dioxide-based estimates of CO (Fick O2 and Fick CO 2 , respectively) were compared with measurements from a flow probe placed on the aortic root., Results: Independent of changes in measured oxygen delivery, cerebral and myocardial tPO 2 increased in proportion to PaO 2 , as did SvO 2 (P < 0.001 for all). Based on mixed model analysis, each 100 mm Hg increase in PaO 2 resulted in a 4.8 ± 0.9% increase in SvO 2 under the conditions tested. Because neither measured oxygen consumption, arterial oxyhemoglobin saturation or cardiac output varied significantly during hyperoxia, changes in SvO 2 resulted in successively increasing errors in Fick O2 during hyperoxia (34% during normoxia, 72% during FiO 2 0.8). Fick CO 2 lacked the progressively worsening errors present in Fick O2 , but correlated poorly with CO., Conclusion: SvO 2 acutely changes following changes in PaO 2 even absent changes in measured DO 2 . This may lead to errors in Fick O2 estimates of CI. Further work is necessary to understand the impact of this phenomenon in disease states., (© 2018 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.)

Intravascular oxygen delivery holds great potential to treat numerous hypoxic conditions and emergencies, including pulmonary disorders, hypoxic tumors, hemorrhagic shock, stroke, cardiac arrest and so on. Tremendous effort has been made in the past to find material solutions for the development of intravenous oxygen carriers and have ranged from blood substitutes to microbubbles with limited success. This paper highlights previous and recent progress in perfluorocarbon-emulsions and microbubbles as intravenous gas carriers, including concerns over their long-term stability, in vivo safety profiles, and oxygen transport efficacy. Their use as potential resuscitative therapeutics for treating various types of cardiac arrest is also discussed., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Encapsulation and delivery of oxygen, carbon dioxide, and other therapeutic gases, using polymeric microcapsules (PMCs) is an emerging strategy to deliver gas as an injectable therapeutic. The gas cargo is stored within the PMC core and its release is mediated by the physiochemical properties of the capsule shell. Although use of PMCs for the rapid delivery of gases has been well described, methods which tune the material properties of PMCs for sustained release of gas are lacking. In this work, we describe a simple method for the high-yield production of gas-in-oil-filled PMCs with tunable sizes and core gas content from preformed polymers using the sequential phase separation and self-emulsification of emulsion-based templates. We demonstrate that prolonged gas release occurs from gas-in-oil PMCs loaded with oxygen and carbon dioxide gas, each of which could have significant clinical applications.

Background: The accurate measurement of oxygen consumption (VO2) and energy expenditure (EE) may be helpful to optimize the treatment of critically ill patients. However, current techniques are limited in their ability to accurately quantify these end points in infants due to a low VO2, low tidal volume, and rapid respiratory rate. This study describes and validates a new device intended to perform in this size range., Methods: We created a customized device that quantifies inspiratory volume using a pneumotachometer and concentrations of oxygen and carbon dioxide gas in the inspiratory and expiratory limbs. We created a customized algorithm to achieve precise time alignment of these measures, incorporating bias flow and compliance factors. The device was validated in 3 ways. First, we infused a certified gas mixture (50% oxygen/50% carbon dioxide) into an artificial lung circuit, comparing measured with simulated VO2 and carbon dioxide production (VCO2) within a matrix of varying tidal volume (4-20 mL), respiratory rate (20-80 bpm), and fraction of inspired oxygen (0.21-0.8). Second, VO2, VCO2, and EE were measured in Sprague Dawley rats under mechanical ventilation and were compared to simultaneous Douglas bag collections. Third, the device was studied on n = 14 intubated, spontaneously breathing neonates and infants, comparing measured values to Douglas measurements. In all cases, we assessed for difference between the device and reference standard by linear regression and Bland-Altman analysis., Results: In vitro, the mean ± standard deviation difference between the measured and reference standard VO2 was +0.04 ± 1.10 (95% limits of agreement, -2.11 to +2.20) mL/min and VCO2 was +0.26 ± 0.31 (-0.36 to +0.89) mL/min; differences were similar at each respiratory rate and tidal volume measured, but higher at fraction of inspired oxygen of 0.8 than at 0.7 or lower. In rodents, the mean difference was -0.20 ± 0.55 (-1.28 to +0.89) mL/min for VO2, +0.16 ± 0.25 (-0.32 to +0.65) mL/min for VCO2, and -0.84 ± 3.29 (-7.30 to +5.61) kcal/d for EE. In infants, the mean VO2 was 9.0 ± 2.5 mL/kg/min by Douglas method and was accurately measured by the device (bias, +0.22 ± 0.87 [-1.49 to +1.93] mL/kg/min). The average VCO2 was 8.1 ± 2.3 mL/kg/min, and the device exhibited a bias of +0.33 ± 0.82 (-1.27 to +1.94) mL/kg/min. Mean bias was +2.56% ± 11.60% of the reading for VO2 and +4.25% ± 11.20% of the reading for VCO2; among 56 replicates, 6 measurements fell outside of the 20% error range, and no patient had >1 of 4 replicates with a >20% error in either VO2 or VCO2., Conclusions: This device can measure VO2, VCO2, and EE with sufficient accuracy for clinical decision-making within the neonatal and pediatric size range, including in the setting of tachypnea or hyperoxia.

A new approach has been developed to prepare stable microbubbles (MBs) by interfacial nanoprecipitation of bioabsorbable polymers at air/liquid interfaces. This facile method offers robust control over the morphology and chemophysical properties of MBs by simple chemical modifications. This approach is amenable to large-scale manufacturing, and is useful to develop functional MBs for advanced biomedical applications. To demonstrate this, a MB-based intravenous oxygen carrier was created that undergoes pH-triggered self-elimination. Intravenous injection of previous MBs increased the risk of pulmonary vascular obstruction. However, we show, for the first time, that our current design is superior, as they 1) yielded no evidence of acute risks in rodents, and 2) improved the survival in a disease model of asphyxial cardiac arrest (from 0 to 100 %), a condition that affects more than 100 000 in-hospital patients, and carries a mortality of about 90 %., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Purpose: Low oxygen levels, or hypoxemia, is a common cause of morbidity and mortality in critically ill patients. Hypoxemia is typically addressed by increasing the fraction of inspired oxygen, the use of mechanical ventilation, or more invasive measures. Recently, the injection of oxygen gas directly into the bloodstream by packaging it within lipid-based oxygen microbubbles (LOMs) has been explored. The purpose of this work is to examine the acute hemodynamic effects of intravenous injections of LOMs., Methods: LOMs composed of 1,2-distearoyl-sn-glycero-3-phosphocoline and cholesterol were manufactured using a process of shear homogenization under an oxygen headspace. A 5 mL aliquot of either PlasmaLyte A, or low (37%) or high (55%) concentration LOMs (n = 10 per group) was injected over a 1 min period into Sprague Dawley rats instrumented for measurement of cardiac index and pulmonary (PVR) and systemic (SVR) vascular resistance during a 60 min observation period. Hemodynamics were compared between groups by linear mixed modeling., Results: Approximately 10 11 LOMs with mean diameter 3.77 ± 1.19 μm were injected over the 1 min period. Relative to controls, rodents treated with high concentration LOMs exhibited a higher pulmonary artery pressure (20 ± 0.4 mmHg vs 18 ± 0.4 mmHg, P < 0.001) and higher PVR (0.31 ± 0.01 vs 0.23 ± 0.01 mmHg/mL*min*kg, P < 0.001. Despite a stable cardiac index (62.2 ± 3.5 vs 62.3 ± 3.4 mL/min*kg, P < 0.001), mean arterial blood pressure decreased significantly in LOM-treated animals (46 ± 2 vs 60 ± 2 mmHg, P < 0.001) due to a decrease in SVR. Injections with aged LOM emulsions (>48 h since manufacture) resulted in a higher incidence of hemodynamic collapse during the observation period (P = 0.02)., Conclusions: LOMs may be injected in quantities sufficient to deliver clinically meaningful volumes of oxygen but cause significant decrements in blood pressure and elevations in PVR.

Assessing the adequacy of oxygen delivery to tissues is vital, particularly in the fields of intensive care medicine and surgery. As oxygen delivery to a cell becomes deficient, changes in mitochondrial redox state precede changes in cellular function. We describe a technique for the continuous monitoring of the mitochondrial redox state on the epicardial surface using resonance Raman spectroscopy. We quantify the reduced fraction of specific electron transport chain cytochromes, a metric we name the resonance Raman reduced mitochondrial ratio (3RMR). As oxygen deficiency worsens, heme moieties within the electron transport chain become progressively more reduced, leading to an increase in 3RMR. Myocardial 3RMR increased from baseline values of 18.1 ± 5.9 to 44.0 ± 16.9% ( P = 0.0039) after inferior vena cava occlusion in rodents ( n = 8). To demonstrate the diagnostic power of this measurement, 3RMR was continuously measured in rodents ( n = 31) ventilated with 5 to 8% inspired oxygen for 30 min. A 3RMR value exceeding 40% at 10 min predicted subsequent cardiac arrest with 95% sensitivity and 100% specificity [area under the curve (AUC), 0.98], outperforming all current measures, including contractility (AUC, 0.51) and ejection fraction (AUC, 0.39). 3RMR correlated with indices of intracellular redox state and energy production. This technique may permit the real-time identification of critical defects in organ-specific oxygen delivery., (Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

After birth cardiomyocytes undergo terminal differentiation, characterized by binucleation and centrosome disassembly, rendering the heart unable to regenerate. Yet, it has been suggested that newborn mammals regenerate their hearts after apical resection by cardiomyocyte proliferation. Thus, we tested the hypothesis that apical resection either inhibits, delays, or reverses cardiomyocyte centrosome disassembly and binucleation. Our data show that apical resection rather transiently accelerates centrosome disassembly as well as the rate of binucleation. Consistent with the nearly 2-fold increased rate of binucleation there was a nearly 2-fold increase in the number of cardiomyocytes in mitosis indicating that the majority of injury-induced cardiomyocyte cell cycle activity results in binucleation, not proliferation. Concurrently, cardiomyocytes undergoing cytokinesis from embryonic hearts exhibited midbody formation consistent with successful abscission, whereas those from 3 day-old cardiomyocytes after apical resection exhibited midbody formation consistent with abscission failure. Lastly, injured hearts failed to fully regenerate as evidenced by persistent scarring and reduced wall motion. Collectively, these data suggest that should a regenerative program exist in the newborn mammalian heart, it is quickly curtailed by developmental mechanisms that render cardiomyocytes post-mitotic.

A continuous supply of oxygen to tissues is vital to life and interruptions in its delivery are poorly tolerated. The treatment of low-blood oxygen tensions requires restoration of functional airways and lungs. Unfortunately, severe oxygen deprivation carries a high mortality rate and can make otherwise-survivable illnesses unsurvivable. Thus, an effective and rapid treatment for hypoxemia would be revolutionary. The i.v. injection of oxygen bubbles has recently emerged as a potential strategy to rapidly raise arterial oxygen tensions. In this report, we describe the fabrication of a polymer-based intravascular oxygen delivery agent. Polymer hollow microparticles (PHMs) are thin-walled, hollow polymer microcapsules with tunable nanoporous shells. We show that PHMs are easily charged with oxygen gas and that they release their oxygen payload only when exposed to desaturated blood. We demonstrate that oxygen release from PHMs is diffusion-controlled, that they deliver approximately five times more oxygen gas than human red blood cells (per gram), and that they are safe and effective when injected in vivo. Finally, we show that PHMs can be stored at room temperature under dry ambient conditions for at least 2 mo without any effect on particle size distribution or gas carrying capacity., Competing Interests: The authors declare no conflict of interest.

Background: We previously developed and validated a strategy for stimulating heart regeneration by administration of recombinant neuregulin (rNRG1), a growth factor, in mice. rNRG1 stimulated proliferation of heart muscle cells, cardiomyocytes, and was most effective when administration began during the neonatal period. Our results suggested the use of rNRG1 to treat pediatric patients with heart failure. However, administration in this age group may stimulate growth outside of the heart., Methods: NRG1 and ErbB receptor expression was determined by RT-PCR. rNRG1 concentrations in serum were quantified by ELISA. Mice that received protocols of recombinant neuregulin1-β1 administration (rNRG1, 100 ng/g body weight, daily subcutaneous injection for the first month of life), previously shown to induce cardiac regeneration, were examined at pre-determined intervals. Somatic growth was quantified by weighing. Organ growth was quantified by MRI and by weighing. Neoplastic growth was examined by MRI, visual inspection, and histopathological analyses. Phospho-ERK1/2 and S6 kinase were analyzed with Western blot and ELISA, respectively., Results: Lung, spleen, liver, kidney, brain, and breast gland exhibited variable expression of the NRG1 receptors ErbB2, ErbB3, ErbB4, and NRG1. Body weight and tibia length were not altered in mice receiving rNRG1. MRI showed that administration of rNRG1 did not alter the volume of the lungs, liver, kidneys, brain, or spinal cord. Administration of rNRG1 did not alter the weight of the lungs, spleen, liver, kidneys, or brain. MRI, visual inspection, and histopathological analyses showed no neoplastic growth. Follow-up for 6 months showed no alteration of somatic or organ growth. rNRG1 treatment increased the levels of phospho-ERK1/2, but not phospho-S6 kinase., Conclusions: Administration protocols of rNRG1 for stimulating cardiac regeneration in mice during the first month of life did not induce unwanted growth effects. Further studies may be required to determine whether this is the case in a corresponding human population.

The introduction of injury models for neonatal mouse hearts has accelerated research on the mechanisms of cardiac regeneration in mammals. However, some existing models, such as apical resection and ligation of the left anterior descending artery, produce variable results, which may be due to technical difficulties associated with these methods. Here we present an alternative model for the study of cardiac regeneration in neonatal mice in which cryoinjury is used to induce heart injury. This model yields a reproducible injury size, does not induce known mechanisms of cardiac regeneration and leads to a sustained reduction of cardiac function. This protocol uses reusable cryoprobes that can be assembled in 5 min, with the entire procedure taking 15 min per pup. The subsequent heart collection and fixation takes 2 d to complete. Cryoinjury results in a myocardial scar, and the size of injury can be scaled by the use of different cryoprobes (0.5 and 1.5 mm). Cryoinjury models are medically relevant to diseases in human infants with heart disease. In summary, the myocardial cryoinjury model in neonatal mice described here is a useful tool for cardiac translational and regeneration research.

Therapies developed for adult patients with heart failure have been shown to be ineffective in pediatric clinical trials, leading to the recognition that new pediatric-specific therapies for heart failure must be developed. Administration of the recombinant growth factor neuregulin-1 (rNRG1) stimulates regeneration of heart muscle cells (cardiomyocytes) in adult mice. Because proliferation-competent cardiomyocytes are more abundant in growing mammals, we hypothesized that administration of rNRG1 during the neonatal period might be more effective than in adulthood. If so, neonatal rNRG1 delivery could be a new therapeutic strategy for treating heart failure in pediatric patients. To evaluate the effectiveness of rNRG1 administration in cardiac regeneration, newborn mice were subjected to cryoinjury, which induced myocardial dysfunction and scar formation and decreased cardiomyocyte cell cycle activity. Early administration of rNRG1 to mice from birth to 34 days of age improved myocardial function and reduced the prevalence of transmural scars. In contrast, administration of rNRG1 from 4 to 34 days of age only transiently improved myocardial function. The mechanisms of early administration involved cardiomyocyte protection (38%) and proliferation (62%). We also assessed the ability of rNRG1 to stimulate cardiomyocyte proliferation in intact cultured myocardium from pediatric patients. rNRG1 induced cardiomyocyte proliferation in myocardium from infants with heart disease who were less than 6 months of age. Our results identify an effective time period within which to execute rNRG1 clinical trials in pediatric patients for the stimulation of cardiomyocyte regeneration., (Copyright © 2015, American Association for the Advancement of Science.)

Tissue hypoxia is a final common pathway that leads to cellular injury and death in a number of critical illnesses. Intravenous injections of self-assembling, lipid-based oxygen microbubbles (LOMs) can be used to deliver oxygen gas, preventing organ injury and death from systemic hypoxemia. However, current formulations exhibit high polydispersity indices (which may lead to microvascular obstruction) and poor shelf-lives, limiting the translational capacity of LOMs. In this study, we report our efforts to optimize LOM formulations using a mixture response surface methodology (mRSM). We study the effect of changing excipient proportions (the independent variables) on microbubble diameter and product loss (the dependent variables). By using mRSM analysis, the experimental data were fit using a reduced Scheffé linear mixture model. We demonstrate that formulations manufactured from 1,2-distearoyl-sn-glycero-3-phosphocholine, corn syrup, and water produce micron-sized microbubbles with low polydispersity indices, and decreased product loss (relative to previously described formulations) when stored at room temperature over a 30-day period. Optimized LOMs were subsequently tested for their oxygen-releasing ability and found to have similar release kinetics as prior formulations., (© 2014 Wiley Periodicals, Inc.)

Gas-filled microbubbles have been developed as ultrasound contrast and drug delivery agents. Microbubbles can be produced by processing surfactants using sonication, mechanical agitation, microfluidic devices, or homogenization. Recently, lipid-based oxygen microbubbles (LOMs) have been designed to deliver oxygen intravenously during medical emergencies, reversing life-threatening hypoxemia, and preventing subsequent organ injury, cardiac arrest, and death. We present methods for scaled-up production of highly oxygenated microbubbles using a closed-loop high-shear homogenizer. The process can produce 2 L of concentrated LOMs (90% by volume) in 90 min. Resulting bubbles have a mean diameter of ~2 μm, and a rheologic profile consistent with that of blood when diluted to 60 volume %. This technique produces LOMs in high capacity and with high oxygen purity, suggesting that this technique may be useful for translational research labs.

Numerous mouse models have utilized Cre-loxP technology to modify gene expression. Adverse effects of Cre recombinase activity have been reported, including in the heart. However, the mechanisms associated with cardiac Cre toxicity are largely unknown. Here, we show that expression of Cre in cardiomyocytes induces a DNA damage response, resulting in cardiomyocyte apoptosis, cardiac fibrosis and cardiac dysfunction. In an effort to increase the recombination efficiency of a widely used tamoxifen-sensitive Cre transgene under control of the α-myosin-heavy-chain promoter (αMHC-MerCreMer), we observed myocardial dysfunction and decreased survival, which were dependent on the dose of tamoxifen injected. After excluding a Cre-independent contribution by tamoxifen, we found that Cre induced myocardial fibrosis, activation of pro-fibrotic genes and cardiomyocyte apoptosis. Examination of the molecular mechanisms showed activation of DNA damage response signaling and p53 stabilization in the absence of loxP sites, suggesting that Cre induced illegitimate DNA breaks. Cardiomyocyte apoptosis was also induced by expressing Cre using adenoviral transduction, indicating that the effect was not dependent on genomic integration of the transgene. Cre-mediated homologous recombination at loxP sites was dose-dependent and had a ceiling effect at ∼80% of cardiomyocytes showing recombination. By titrating the amount of tamoxifen to maximize recombination while minimizing animal lethality, we determined that 30 μg tamoxifen/g body weight/day injected on three consecutive days is the optimal condition for the αMHC-MerCreMer system to induce recombination in the Rosa26-lacZ strain. Our results further highlight the importance of experimental design, including the use of appropriate genetic controls for Cre expression.

Self-assembling, concentrated, lipid-based oxygen microparticles (LOMs) have been developed to administer oxygen gas when injected intravenously, preventing organ injury and death from systemic hypoxemia in animal models. Distinct from blood substitutes, LOMs are a one-way oxygen carrier designed to rescue patients who experience life-threatening hypoxemia, as caused by airway obstruction or severe lung injury. Here, we describe methods to manufacture large quantities of LOMs using an in-line, recycling, high-shear homogenizer, which can create up to 4 liters of microparticle emulsion in 10 minutes, with particles containing a median diameter of 0.93 microns and 60 volume% of gas phase. Using this process, we screen 30 combinations of commonly used excipients for their ability to form stable LOMs. LOMs composed of DSPC and cholesterol in a 1:1 molar ratio are stable for a 100 day observation period, and the number of particles exceeding 10 microns in diameter does not increase over time. When mixed with blood in vitro, LOMs fully oxygenate blood within 3.95 seconds of contact, and do not cause hemolysis or complement activation. LOMs can be manufactured in bulk by high shear homogenization, and appear to have a stability and size profile which merit further testing., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Administration of a recombinant peptide of Periostin (rPN) has recently been shown to stimulate cardiomyocyte proliferation and angiogenesis after myocardial infarction (MI) [1]. However, strategies for targeting the delivery of rPN to the heart are lacking. Intrapericardial administration of drug-eluting hydrogels may provide a clinically viable strategy for increasing myocardial retention, therapeutic efficacy, and bioactivity of rPN and to decrease systemic re-circulation., Methods and Results: We investigated the ability of intrapericardial injections of drug-eluting hydrogels to deliver and prolong the release of rPN to the myocardium in a large animal model of myocardial infarction. Gelfoam is an FDA-approved hemostatic material commonly used in surgery, and is known to stimulate fibrin clot formation. We show that Gelfoam disks loaded with rPN, when implanted within the pericardium or peritoneum of mammals becomes encapsulated within a non-fibrotic fibrin-rich hydrogel, prolonging the in vitro and in vivo release of rPN. Administration into the pericardial cavity of pigs, following a complete occlusion of the left anterior descending artery, leads to greater induction of cardiomyocyte mitosis, increased cardiomyocyte cell cycle activity, and enhanced angiogenesis compared to direct injection of rPN alone., Conclusions: The results of this study suggest that intrapericardial drug delivery of Gelfoam, enhanced by triggered clot formation, can be used to effectively deliver rPN to the myocardium in a clinically relevant model of myocardial infarction. The work presented here should enhance the translational potential of pharmaceutical-based strategies that must be targeted to the myocardium.

Click chemistry provides extremely selective and orthogonal reactions that proceed with high efficiency and under a variety of mild conditions, the most common example being the copper(I)-catalysed reaction of azides with alkynes. While the versatility of click reactions has been broadly exploited, a major limitation is the intrinsic toxicity of the synthetic schemes and the inability to translate these approaches into biological applications. This manuscript introduces a robust synthetic strategy where macromolecular precursors react through a copper-free click chemistry, allowing for the direct encapsulation of cells within click hydrogels for the first time. Subsequently, an orthogonal thiol-ene photocoupling chemistry is introduced that enables patterning of biological functionalities within the gel in real time and with micrometre-scale resolution. This material system enables us to tailor independently the biophysical and biochemical properties of the cell culture microenvironments in situ. This synthetic approach uniquely allows for the direct fabrication of biologically functionalized gels with ideal structures that can be photopatterned, and all in the presence of cells.

Hydrogels formed from (meth)acrylated poly(ethylene glycol) precursors are commonly used in a variety of biomedical applications ranging from tissue engineering to biosensors. While this approach has proven quite diverse, a major limitation to this approach is the heterogeneities and nonidealities that arise in the gels from the chain polymerization process, which increases the difficulty in relating the network structure to the final physical properties of the gel. Here we have exploited the specificity and fidelity of the [3+2] cycloaddition reaction to synthesize hydrogels with controlled architectures and improved mechanical properties. Moreover, we demonstrate a general approach toward the integration of multifunctional photoreactive polypeptide sequences into the network structure that provides a facile way to independently tune the 3D chemical and physical properties of the gel. Standard photolithographic techniques were used to generate a variety of two- and three-dimensional patterns as well as controlled biochemical gradients within existing preformed hydrogels.

Adsorption of synthetic alanine-rich peptides to lipid monolayers was studied by X-ray and neutron reflectivity, grazing incidence X-ray diffraction (GIXD), and circular dichroic spectroscopy. The peptides contained histidine residues to drive adsorption to Langmuir monolayers of lipids with iminodiacetate headgroups loaded with Cu2+. Adsorption was found to be irreversible with respect to bulk peptide concentration. The peptides were partially helical in solution at room temperature, the temperature of the adsorption assays. Comparisons of the rate of binding and the structure of the adsorbed layer were made as a function of the number of histidines (from 0 to 2) and also as a function of the positioning of the histidines along the backbone. For peptides containing two histidines on the same side of the helical backbone, large differences were observed in the structure of the adsorbed layer as a function of the spacing of the histidines. With a spacing of 6 A, there was a substantial increase in helicity upon binding (from 17% to 31%), and the peptides adsorbed to a final density approaching that of a nearly completed monolayer of alpha-helices adsorbed side-on. The thickness of the adsorbed layer (17 +/- 2.5 A) was slightly greater than the diameter of alpha-helices, suggesting that the free, unstructured ends extended into solution. With a spacing of 30 A between histidines, a far weaker increase in helicity upon binding was observed (from 13% to 19%) and a much lower packing density resulted. The thickness of the adsorbed layer (10 +/- 4 A) was smaller, consistent with the ends being bound to the monolayer. Striking differences were observed in the interaction of the two types of peptide with the lipid membrane by GIXD, consistent with binding by two correlated sites only for the case of 6 A spacing. All these results are attributed to differences in spatial correlation between the histidines as a function of separation distance along the backbone for these partially helical peptides. Finally, control over orientation was demonstrated by placing a histidine on an end of the sequence, which resulted in adsorbed peptides oriented perpendicular to the membrane.

Many recognition events important in biology are mediated via multivalent interactions between relevant oligosaccharides and multiple saccharide receptors present on lectins, viruses, toxins, and cell surfaces. Because of the important role played by protein-carbohydrate interactions in these pathogenic recognition events and in other human diseases, considerable effort has been devoted toward the development of multivalent polymeric ligands for carbohydrate-binding proteins. In this work, we report the synthesis of new polypeptide-based glycopolymers produced via a combination of protein engineering and chemical methods. These methodologies permit control over the number and the spacing of saccharides on the scaffold, as well as the conformation of the polymer backbone, and allow a more purposeful design of polymers for manipulation of multivalent binding events. Two families of galactose-bearing glycopolypeptides with random coil conformations, [(AG)(3)PEG](y) (y = 10 and 16) and {[(AG)(2)PSG](2)[(AG)(2)PEG][(AG)(2)PSG](2)}(y) (y = 6), have been synthesized. The carboxylic acid functionality of the glutamic acid residues allowed subsequent modification with amino-saccharides to yield the desired glycopolypeptides; selective placement of the glutamic acid group permitted investigation of the effects of multivalency and saccharide spacing on toxin inhibition. In addition, a family of galactose-functionalized PGA-based glycopolymers of varying molecular weights was also synthesized to compare the effects of backbone flexibility and hydrodynamic volume, relative to the recombinant glycopolypeptides, on toxin inhibition. Glycopolypeptides were characterized via (1)H NMR, MALDI-TOF mass spectrometry, SDS-PAGE analysis, and spectrophotometric assays. They were tested as inhibitors of the binding of the cholera toxin B subunit via direct enzyme-linked assays. The data from these experiments confirm the relevance of appropriate saccharide spacing on controlling the binding event and also indicate the influence of chain extension in improving inhibition.

This study involves the interactions of proteins with Langmuir monolayers of a metal-chelating lipid, where adsorption is driven by a strong specific interaction between histidines on the proteins and divalent metal ions loaded into the lipid headgroups. A comparison of the structural rearrangement of the lipid film upon adsorption of myoglobin and a synthetic peptide, each of which have multiple histidines, with that upon the adsorption of lysozyme, which has only one histidine, suggests that the lipid rearrangement in the former case is due to the multiplicity of binding sites. The kinetics and manner of rearrangement change with the binding energy and film pressure.

A variety of important biological events are mediated by the multivalent interaction between relevant oligosaccharides and multiple saccharide receptors on lectins, toxins, and cell surfaces; a variety of glycopolymeric materials have therefore been investigated in studies aimed at manipulating these events. The synthesis of protein- and polypeptide-based glycopolymers via protein engineering and other methods offers opportunities to control both the number and the spacing of saccharides on a scaffold, as well as the conformation of the polymer backbone, and will therefore facilitate the structure-based design of polymers for inhibition of multivalent binding events. In initial studies, we have synthesized a family of galactose-functionalized glycopolymers with a poly(L-glutamic acid) backbone, in which the density and linker length of the pendant carbohydrate moiety were varied. The composition of the glycopolymers was determined via (1)H NMR spectroscopy, and the impact of saccharide density and linker length, as well as the potential for these polypeptide-based glycopolymers to act as high-affinity inhibitors of the cholera toxin, has been indicated via competitive enzyme-linked immunosorbent assay and fluorescence titration experiments. The results of these studies suggest strategies for optimizing the binding of linear glycopolymers to bacterial toxins and will aid in the design of additional protein-based materials for studying the impact of multivalency, spacing, and backbone rigidity in a variety of biologically relevant binding events.