Search

In the limit of large magnetic Reynolds numbers, it is shown that a smooth differential rotation can lead to fast dynamo action, provided that the electrical conductivity or magnetic permeability is anisotropic. If the shear is infinite, for example between two rotating solid bodies, the anisotropic dynamo becomes furious, meaning that the magnetic growth rate increases toward infinity with an increasing magnetic Reynolds number., Comment: 19 pages, 8 figures, 1 table

We report measurements of dynamo action in a new experimental setup, named Fury, based on the use of an anisotropic electrical conductivity. It consists in a copper rotor rotating inside a copper stator, electrically connected with a thin layer of liquid metal, galinstan. Grooves have been cut in the copper so that, everywhere, electrical conductivity can be considered to be that of copper along two directions while it is zero along the third one. The configuration is efficient and dynamo action can be powered by hand. We have also used a motor with better control, enabling us to drive the rotor at specified velocity or torque functions of time. The structure of the axisymmetric magnetic field produced is found to be close to the numerical modelling using FreeFem++. The experimental dynamo behaves very nearly as expected for a kinematic dynamo, so that the threshold dynamo velocity cannot be exceeded, or only briefly. More mechanical power in the rotor rotation leads to an increase in the magnetic field intensity, the magnetic energy being proportional to the extra mechanical power beyond threshold. In the transient following a step increase of torque, magnetic and angular velocity oscillations have been observed and explained., Comment: 19 pages, 9 figures. Data and data processing files can be found at https://mycore.core-cloud.net/index.php/s/ZuJ0zNp6JzLhVar

The effect on dynamo action of an anisotropic electrical conductivity conjugated to an anisotropic magnetic permeability is considered. Not only is the dynamo fully axisymmetric, but it requires only a simple differential rotation, which twice challenges the well-established dynamo theory. Stability analysis is conducted entirely analytically, leading to an explicit expression of the dynamo threshold. The results show a competition between the anisotropy of electrical conductivity and that of magnetic permeability, the dynamo effect becoming impossible if the two anisotropies are identical. For isotropic electrical conductivity, Cowling's neutral point argument does imply the absence of an azimuthal component of current density, but does not prevent the dynamo effect as long as the magnetic permeability is anisotropic., Comment: 19 pages, 6 figures

Using direct numerical simulation of hydrodynamic turbulence with helicity forcing applied at all scales, a near-maximum helical turbulent state is obtained, with an inverse energy cascade at scales larger than the energy forcing scale and a forward helicity cascade at scales smaller than the energy forcing scale. In contrast to previous studies using decimated triads, our simulations contain all possible triads. By computing the shell-to-shell energy fluxes, we show that the inverse energy cascade results from weakly non-local interactions among homochiral triads. Varying the helicity injection range of scales leads to necessary conditions to obtain an inverse energy cascade., Comment: 13 pages, 10 figures

With materials of anisotropic electrical conductivity, it is possible to generate a dynamo with a simple velocity field, of the type precluded by Cowling's theorems with isotropic materials. Following a previous study by Ruderman and Ruzmaikin [1] who considered the dynamo effect induced by a uniform shear flow, we determine the conditions for the dynamo threshold when a solid plate is sliding over another one, both with anisotropic electrical conductivity. We obtain numerical solutions for a general class of anisotropy and obtain the conditions for the lowest magnetic Reynolds number, using a collocation Chebyshev method. In a particular geometry of anisotropy and wavenumber, we also derive an analytical solution, where the eigenvectors are just combinations of four exponential functions. An explicit analytical expression is obtained for the critical magnetic Reynold number. Above the critical magnetic Reynold number, we have also derived an analytical expression for the growth rate showing that this is a 'very fast' dynamo, extrapolating on the 'slow' and 'fast' terminology introduced by Vainshtein and Zeldovich [2]., Comment: 14 pages, 9 figures, 4 appendices

The dynamo equations are solved numerically with a helical forcing corresponding to the Roberts flow. In the fully turbulent regime the flow behaves as a Roberts flow on long time scales, plus turbulent fluctuations at short time scales. The dynamo onset is controlled by the long time scales of the flow, in agreement with the former Karlsruhe experimental results. The dynamo mechanism is governed by a generalized $\alpha$-effect which includes both usual $\alpha$-effect and turbulent diffusion, plus all higher order effects. Beyond the onset we find that this generalized $\alpha$-effect scales as $O(Rm^{-1})$ suggesting the take-over of small-scale dynamo action. This is confirmed by simulations in which dynamo occurs even if the large-scale field is artificially suppressed., Comment: 4 pages, 3 figures

In this paper we study the enstrophy transers in helical turbulence using direct numerical simulation. We observe that the helicity injection does not have significant effects on the inertial-range energy and helicity spectra ($\sim k^{-5/3}$) and fluxes (constants). We also calculate the separate contributions to enstrophy transfers via velocity to vorticity and vorticity to vorticity channels. There are four different enstrophy fluxes associated with the former channel or vorticity stretching, and one flux associated with the latter channel or vorticity advection. In the inertial range, the fluxes due to vorticity stretching are larger than that due to advection. These transfers too are insensitive to helicity injection., Comment: 7 pages, 4 figures

In hydrodynamic and magnetohydrodynamic turbulence, expressions for the transfer rates rely on integrals over wavenumber triads $(\textbf{k,p,q})$ satisfying $\textbf{k+p+q=0}$. As an example $S_E^{uu}(\textbf{k|p,q})$ denotes the kinetic energy transfer rate to the mode $\textbf{k}$, from the two other modes in the triad, $\textbf{p}$ and $\textbf{q}$. As noted by Kraichnan (1958), in $S_E^{uu}(\textbf{k|p,q})$, what fraction of the energy transferred to the mode $\textbf{k}$ originated from $\textbf{p}$ and which from $\textbf{q}$ is unknown . Such an expression is thus incongruent with the customary description of turbulence in terms of two-scale energy exchange. Notwithstanding this issue, Dar etal. (2001) further decomposed these transfers into separate contributions from $\textbf{p}$-to-$\textbf{k}$ and $\textbf{q}$-to-$\textbf{k}$, thus introducing the concept of mode-to-mode transfers that they applied to MHD turbulence. Doing so, they had to set aside additional transfers circulating within each triad, but failed to calculate them. In the present paper we explain how to derive the complete expressions of the mode-to-mode transfers, including the circulating transfers. We do it for kinetic energy and kinetic helicity in hydrodynamic turbulence, for kinetic energy, magnetic energy and magnetic helicity in MHD turbulence. Separating the contribution of magnetic advection from magnetic stretching, the energy mode-to-mode transfer rates involving the magnetic field become uniquely defined, in striking contrast to the hydrodynamic case. The magnetic helicity mode-to-mode transfer rate is also found to be uniquely defined, contrary to kinetic helicity in hydrodynamics. We find that shell-to-shell transfer rates have the same properties as mode-to-mode transfer rates. Finally calculating the fluxes, we show how the circulating transfers cancel in accordance with conservation laws., Comment: 19 pages, 3 figures

A milestone of dynamo theory is Cowling's theorem, known in its modern form as the impossibility for an axisymmetric velocity field to generate an axisymmetric magnetic field by dynamo action. Using an anisotropic electrical conductivity we show that an axisymmetric dynamo is in fact possible with a motion as simple as solid body rotation. On top of that the instability analysis can be conducted entirely analytically, leading to an explicit expression of the dynamo threshold which is the only example in dynamo theory., Comment: 4 pages, 4 figures

In this paper we describe the mode-to-mode energy transfers and energy fluxes of MHD turbulence. These energy transfers are very useful for understanding the turbulence dynamics, as well as for applications such as dynamo. We illustrate how the energy fluxes provide valuable insights into the mechanism of growth of the large-scale magnetic energy in dynamo., Comment: to appear in Magnetohydrodynamics

We solve the Navier-Stokes equations with two simultaneous forcings. One forcing is applied at a given large-scale and it injects energy. The other forcing is applied at all scales belonging to the inertial range and it injects helicity. In this way we can vary the degree of turbulence helicity from non helical to maximally helical. We find that increasing the rate of helicity injection does not change the energy flux. On the other hand the level of total energy is strongly increased and the energy spectrum gets steeper. The energy spectrum spans from a Kolmogorov scaling law $k^{-5/3}$ for a non-helical turbulence, to a non-Kolmogorov scaling law $k^{-7/3}$ for a maximally helical turbulence. In the later case we find that the characteristic time of the turbulence is not the turnover time but a time based on the helicity injection rate. We also analyse the results in terms of helical modes decomposition. For a maximally helical turbulence one type of helical mode is found to be much more energetic than the other one, by several orders of magnitude. The energy cascade of the most energetic type of helical mode results from the sum of two fluxes. One flux is negative and can be understood in terms of a decimated model. This negative flux is however not sufficient to lead an inverse energy cascade. Indeed the other flux involving the least energetic type of helical mode is positive and the largest. The least energetic type of helical mode is then essential and cannot be neglected.

The energy spectral density $E(k)$, where $k$ is the spatial wave number, is a well-known diagnostic of homogeneous turbulence and magnetohydrodynamic turbulence. However in most of the curves plotted by different authors, some systematic kinks can be observed at $k=9$, $k=15$ and $k=19$. We claim that these kinks have no physical meaning, and are in fact the signature of the method which is used to estimate $E(k)$ from a 3D spatial grid. In this paper we give another method, in order to get rid of the spurious kinks and to estimate $E(k)$ much more accurately., Comment: 4 pages, in PRE

Shell models of hydrodynamic turbulence originated in the seventies. Their main aim was to describe the statistics of homogeneous and isotropic turbulence in spectral space, using a simple set of ordinary differential equations. In the eighties, shell models of magnetohydrodynamic (MHD) turbulence emerged based on the same principles as their hydrodynamic counter-part but also incorporating interactions between magnetic and velocity fields. In recent years, significant improvements have been made such as the inclusion of non-local interactions and appropriate definitions for helicities. Though shell models cannot account for the spatial complexity of MHD turbulence, their dynamics are not over simplified and do reflect those of real MHD turbulence including intermittency or chaotic reversals of large-scale modes. Furthermore, these models use realistic values for dimensionless parameters (high kinetic and magnetic Reynolds numbers, low or high magnetic Prandtl number) allowing extended inertial range and accurate dissipation rate. Using modern computers it is difficult to attain an inertial range of three decades with direct numerical simulations, whereas eight are possible using shell models. In this review we set up a general mathematical framework allowing the description of any MHD shell model. The variety of the latter, with their advantages and weaknesses, is introduced. Finally we consider a number of applications, dealing with free-decaying MHD turbulence, dynamo action, Alfven waves and the Hall effect., Comment: published in Physics Reports

Experiments with a liquid metal alloy, galinstan, are reported and show clear evidence of Alfv\'en wave propagation as well as resonance of Alfv\'en modes. Galinstan is liquid at room temperature, and although its electrical conductivity is not as large as that of liquid sodium or NaK, it has still been possible to study Alfv\'en waves, thanks to the use of intense magnetic fi elds, up to 13 teslas. The maximal values of Lundquist number, around 60, are similar to that of the reference experimental study by Jameson [1]. The generation mechanism for Alfv\'en waves and their refl ection is studied carefully. Numerical simulations have been performed and have been able to reproduce the experimental results despite the fact that the simulated magnetic Prandtl number was much larger than that of galinstan. An originality of the present study is that a poloidal disturbance (magnetic and velocity fields) is generated, allowing us to track its propagation from outside the conducting domain, hence without interfering., Comment: 19 pages; Physics of Fluids (2011) 1

A phenomenology of isotropic magnetohydrodynamic turbulence subject to both rotation and applied magnetic field is presented. It is assumed that the triple correlations decay-time is the shortest between the eddy turn-over time and the ones associated to the rotating frequency and Alfv\'en wave period. For $Pm=1$ it leads to four kinds of piecewise spectra, depending on the four parameters, injection rate of energy, magnetic diffusivity, rotation rate and applied field. With a shell model of MHD turbulence (including rotation and applied magnetic field), spectra for $Pm \le 1$ are presented, together with the ratio between magnetic and viscous dissipation., Comment: 5 figures, 1 table, appear in PRE

It is generally believed that sunspots are the emergent part of magnetic flux tubes in the solar interior. These tubes are created at the base of the convection zone and rise to the surface due to their magnetic buoyancy. The motion of plasma in the convection zone being highly turbulent, the surface manifestation of sunspots may retain the signature of this turbulence, including its intermittency. From direct observations of sunspots, and indirect observations of the concentration of cosmogenic isotopes $^{14}$C in tree rings or $^{10}$Be in polar ice, power spectral densities in frequency are plotted. Two different frequency scalings emerge, depending on whether the Sun is quiescent or active. %magnetic activity is maximum or minimum. From direct observations we can also calculate scaling exponents. These testify to a strong intermittency, comparable with that observed in the solar wind., Comment: 5 pages, 6 figures, accepted for publication in MNRAS Letters

Scale separation between the flow and the magnetic field is a common feature of natural dynamos. It has also been used in the Karlsruhe sodium experiment in which the scale of the magnetic field is roughly 7 times larger than the scale of the flow [R. Stieglitz and U. M\"uller, Phys. Fluids 13, 561 (2001)]. Recently, Fauve & P\'etr\'elis ["Peyresq lectures on nonlinear phenomena", ed. J. Sepulchre, World Scientific, 1 (2003)] have shown that the power needed to reach the dynamo threshold in a dynamo experiment increases with the scale separation in the limit of large scale separation. With a more elaborate method based on subharmonic solutions [F. Plunian and K.-H. R\"adler, Geophys. Astrophys. Fluid Dynamics 96, 115 (2002)], we show, for the Roberts flow, the existence of an optimal scale separation for which this power is minimum. Previous results obtained by Tilgner [Phys. Lett. A 226, 75 (1997)] with a completely different numerical method are also reconsidered here. Again, we find an optimal scale separation in terms of minimum power for dynamo action. In addition we find that this scale separation compares very well with the one derived from the subharmonic solutions method., Comment: 6 pages, 2 figures

This paper considers dynamo action in smooth helical flows in cylindrical geometry, otherwise known as Ponomarenko dynamos, with periodic time dependence. An asymptotic framework is developed that gives growth rates and frequencies in the highly conducting limit of large magnetic Reynolds number, when modes tend to be localized on resonant stream surfaces. This theory is validated by means of numerical simulations., Comment: 12 pages, 4 figures

We use a simple model of Bullard-type disc dynamo, in which the disc rotation rate is subject to harmonic oscillations, to analyze the generation of magnetic field by the parametric resonance mechanism. The problem is governed by a damped Mathieu equation. The Floquet exponents, which define the magnetic field growth rates, are calculated depending on the amplitude and frequency of the oscillations. Firstly, we show that the dynamo can be excited at significantly subcritical disc rotation rates when the latter is subject to harmonic oscillations with a certain frequency. Secondly, at supercritical mean rotation rates, the dynamo can also be suppressed but only in narrow frequency bands and at sufficiently large oscillation amplitudes., Comment: 4 pages, 5 figures

With a non local shell model of magnetohydrodynamic turbulence we investigate numerically the turbulent dynamo action for low and high magnetic Prandtl numbers ($Pm$). The results obtained in the kinematic regime and along the way to dynamo saturation are understood in terms of a phenomenological approach based on the local ($Pm\ll 1$) or non local ($Pm\gg 1$) nature of the energy transfers. In both cases the magnetic energy grows at small scale and saturates as an inverse `` cascade ''., Comment: 17 pages, 6 figures, submitted to ApJ

We study the dynamo threshold of a helical flow made of a mean (stationary) plus a fluctuating part. Two flow geometries are studied, either (i) solid body or (ii) smooth. Two well-known resonant dynamo conditions, elaborated for stationary helical flows in the limit of large magnetic Reynolds numbers, are tested against lower magnetic Reynolds numbers and for fluctuating flows (zero mean). For a flow made of a mean plus a fluctuating part the dynamo threshold depends on the frequency and the strength of the fluctuation. The resonant dynamo conditions applied on the fluctuating (resp. mean) part seems to be a good diagnostic to predict the existence of a dynamo threshold when the fluctuation level is high (resp. low)., Comment: 37 pages, 8 figures

We investigate the dynamo problem in the limit of small magnetic Prandtl number ($\Pm$) using a shell model of magnetohydrodynamic turbulence. The model is designed to satisfy conservation laws of total energy, cross helicity and magnetic helicity in the limit of inviscid fluid and null magnetic diffusivity. The forcing is chosen to have a constant injection rate of energy and no injection of kinetic helicity nor cross helicity. We find that the value of the critical magnetic Reynolds number ($\Rm$) saturates in the limit of small $\Pm$. Above the dynamo threshold we study the saturated regime versus $\Rm$ and $\Pm$. In the case of equipartition, we find Kolmogorov spectra for both kinetic and magnetic energy except for wave numbers just below the resistive scale. Finally the ratio of both dissipation scales (viscous to resistive) evolves as $\Pm^{-3/4}$ for $\Pm < 1$, Comment: 19 pages, 9 figures, published in the Journal of Turbulence

We study a modified Bullard dynamo and show that this system is equivalent to a nonlinear oscillator subject to a multiplicative noise. The stability analysis of this oscillator is performed. Two bifurcations are identified, first towards an `` intermittent\rq\rq state where the absorbing (non-dynamo) state is no more stable but the most probable value of the amplitude of the oscillator is still zero and secondly towards a `` turbulent\rq\rq (dynamo) state where it is possible to define unambiguously a (non-zero) most probable value around which the amplitude of the oscillator fluctuates. The bifurcation diagram of this system exhibits three regions which are analytically characterized.