Search

In this work, the processes of photodissociation of some diatomic molecular ions are investigated. The partial photodissociation cross-sections for the individual rovibrational states of the diatomic molecular ions, which involves alkali metals, as well as corresponding data on molecular species and molecular state characterizations, are calculated. Also, the average cross-section and the corresponding spectral absorption rate coefficients for those small molecules are presented in tabulated form as a function of wavelengths and temperatures. The presented results can be of interest for laboratory plasmas as well as for the research of chemistry of different stellar objects with various astrophysical plasmas.

Carbonate minerals have been detected in Jezero crater, an ancient lake basin that is the landing site of the Mars 2020 Perseverance rover, and within the regional olivine‐bearing (ROB) unit in the Nili Fossae region surrounding this crater. It has been suggested that some carbonates in the margin fractured unit, a rock unit within Jezero crater, formed in a fluviolacustrine environment, which would be conducive to preservation of biosignatures from paleolake‐inhabiting lifeforms. Here, we show that carbonate‐bearing rocks within and outside of Jezero crater have the same range of visible‐to‐near‐infrared carbonate absorption strengths, carbonate absorption band positions, thermal inertias, and morphologies. Thicknesses of exposed carbonate‐bearing rock cross‐sections in Jezero crater are ∼75–90 m thicker than typical ROB unit cross‐sections in the Nili Fossae region, but have similar thicknesses to ROB unit exposures in Libya Montes. These similarities in carbonate properties within and outside of Jezero crater is consistent with a shared origin for all of the carbonates in the Nili Fossae region. Carbonate absorption minima positions indicate that both Mg‐ and more Fe‐rich carbonates are present in the Nili Fossae region, consistent with the expected products of olivine carbonation. These estimated carbonate chemistries are similar to those in martian meteorites and the Comanche carbonates investigated by the Spirit rover in Columbia Hills. Our results indicate that hydrothermal alteration is the most likely formation mechanism for non‐deltaic carbonates within and outside of Jezero crater., Key Points Carbonates within and outside of Jezero crater have similar spectra, thermal inertias, morphologies, and thicknessesCarbonates within and outside of Jezero crater likely formed via the same processesHydrothermal alteration and evaporation are the most likely processes for carbonate formation within and outside of Jezero crater

The high computational cost of Global Climate Models (GCMs) is a problem that limits their use in many areas. Recently an inverse climate modeling (InvCM) method, which fixes the global mean sea surface temperature (SST) and evolves the CO2 mixing ratio to equilibrate climate, has been implemented in a cloud‐resolving model. In this article, we apply InvCM to ExoCAM GCM aquaplanet simulations, allowing the SST pattern to evolve while maintaining a fixed global‐mean SST. We find that InvCM produces the same climate as normal slab‐ocean simulations but converges an order of magnitude faster. We then use InvCM to calculate the equilibrium CO2 for SSTs ranging from 290 to 340 K at 1 K intervals and reproduce the large increase in climate sensitivity at an SST of about 315 K at much higher temperature resolution. The speedup provided by InvCM could be used to equilibrate GCMs at higher spatial resolution or to perform broader parameter space exploration in order to gain new insight into the climate system. Additionally, InvCM could be used to find unstable and hidden climate states, and to find climate states close to bifurcations such as the runaway greenhouse transition., Key Points We converge a GCM by varying the CO2 while keeping the global‐mean surface temperature fixed (the inverse climate modeling method)Inverse climate modeling converges about 10 times faster than normal slab‐ocean simulationsThe SST gradient response timescale is the bottleneck on the convergence rate of inverse climate modeling

In situ measurements of relative humidity (RH) on Mars have only been performed by the Phoenix (PHX) and Mars Science Laboratory (MSL) missions. Here we present results of our recalibration of the PHX thermal and electrical conductivity probe (TECP) RH sensor. This recalibration was conducted using a TECP engineering model subjected to the full range of environmental conditions at the PHX landing site in the Michigan Mars Environmental Chamber. The experiments focused on the warmest and driest conditions (daytime) because they were not covered in the original calibration (Zent et al., 2010, https://doi.org/10.1029/2009JE003420) and previous recalibration (Zent et al., 2016, https://doi.org/10.1002/2015JE004933). In nighttime conditions, our results are in excellent agreement with the previous 2016 recalibration, while in daytime conditions, our results show larger water vapor pressure values. We obtain vapor pressure values in the range ~0.005–1.4 Pa, while Zent et al. (2016, https://doi.org/10.1002/2015JE004933) obtain values in the range ~0.004–0.4 Pa. Our higher daytime values are in better agreement with independent estimates from the ground by the PHX Surface Stereo Imager instrument and from orbit by Compact Reconnaissance Imaging Spectrometer for Mars. Our results imply larger day‐to‐night ratios of water vapor pressure at PHX compared to MSL, suggesting a stronger atmosphere‐regolith interchange in the Martian arctic than at lower latitudes. Further, they indicate that brine formation at the PHX landing site via deliquescence can be achieved only temporarily between midnight and 6 a.m. on a few sols. The results from our recalibration are important because they shed light on the near‐surface humidity environment on Mars., Key Points We have recalibrated the relative humidity sensor of the Mars Phoenix landerWe obtain water vapor pressure values in the range ~0.005–1.4 Pa, while in previous recalibrations, values in the range ~0.004–0.4 PaOur results show a two‐order‐of‐magnitude diurnal variation of water vapor pressure, suggesting a strong atmosphere‐regolith interchange

The atmospheric circulation response to global warming is important for accurate prediction of climate change on regional scales. For the midlatitudes, shifts in the extratropical jet streams have important consequences for precipitation, blocking, and extreme events. It has proven to be a challenge, however, to predict. For example, the North Atlantic jet stream plays a vital role in the climate of eastern North America and Europe; in the last intercomparison of state‐of‐the‐art climate models, the models did not even agree on the sign of its wintertime response to global warming. Perhaps this should not come as a surprise, as we also lack a comprehensive theory for the impact of warming on the midlatitude circulation. In a recent study, Tan et al. (2019, https://doi.org/10.1029/2018MS001492) constructed models of simpler atmospheres to explore the response of the midlatitude jet to global warming. Their idealized atmospheres highlight the difficulty of developing a comprehensive theory for the midlatitude circulation but also provide pathways to improve models of Earth's atmosphere. Models of simpler atmospheres allow one to isolate the impact of specific atmospheric processes and connect theoretical understanding with comprehensive climate prediction systems. Such models can also be used to explore very different atmospheric regimes, from Earth's past to distant planets., Key Points The atmospheric circulation response to global warming is both a challenge to predict and to understandModels of idealized atmospheres allow a process‐oriented investigation of the circulation responseA growing number of models of simpler atmospheres are being developed and shared

The presence of hydrogen, most likely in the form of water ice, is well established in Mercury's permanently shaded polar craters. But lower concentrations that may exist away from the poles have not previously been well constrained. In this work we use data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) Gamma‐Ray and Neutron Spectrometer to produce the first map of the absolute hydrogen abundance in Mercury's northern hemisphere. We find a mean abundance of 300−150+250 ppm and a latitudinal trend that agrees with earlier results showing enhanced hydrogen contained within Mercury's radar bright craters. Additionally, we observe a middle‐ and low‐latitude variation in hydrogen abundance that is correlated most strongly with temperature 20 cm beneath Mercury's surface., Key Points Gamma‐Ray Spectrometer data reveal Mercury's northern hemisphere's average hydrogen abundance to be 300−150+250 ppmWe produced the first neutron‐derived hydrogen map, which shows an increase at the north pole of 75 ppm over equatorial valuesAt midlatitudes a hydrogen‐surface temperature anticorrelation is seen, with less hydrogen at Mercury's hot poles than at its cold poles

Jezero crater is the landing site for the Mars 2020 Perseverance rover. The Noachian‐aged crater has undergone several periods of fluvial and lacustrine activity and phyllosilicate‐ and carbonate‐bearing rocks were formed and emplaced as a result. It also contains a portion of the regional Nili Fossae olivine‐carbonate unit. In this work, we performed spectral mixture analysis of visible/near‐infrared hyperspectral imagery over Jezero. We modeled carbonate abundances up to ∼35% and identified three distinct units containing different carbonate phases. Our work also shows that the olivine in Jezero is predominantly restricted to aeolian deposits overlying the carbonate rocks. The diversity of carbonate phases in Jezero points to multiple periods of carbonate formation under varying conditions., Key Points Unmixing of near‐infrared spectra in Jezero crater suggests carbonate abundances up to ∼35% per pixelStrong olivine spectral signatures are correlated to sand deposits overlying light‐toned carbonate‐bearing rocksFe‐carbonate is the dominant phase throughout the study area; Mg‐carbonate is present along the Jezero paleolake rim

We present the first investigation and quantification of the photoionization loss process to Mercury's sodium exosphere from spacecraft and ground‐based observations. We analyze plasma and neutral sodium measurements from NASA's MESSENGER spacecraft and the THEMIS telescope. We find that the sodium ion (Na+) content and therefore the significance of photoionization varies with Mercury's orbit around the Sun (i.e., true anomaly angle: TAA). Na+ production is affected by the neutral sodium solar‐radiation acceleration loss process. More Na+ was measured on the inbound leg of Mercury's orbit at 180°–360° TAA because less neutral sodium is lost downtail from radiation acceleration. Calculations using results from observations show that the photoionization loss process removes ∼1024 atoms/s from the sodium exosphere (maxima of 4 × 1024 atoms/s), showing that modeling efforts underestimate this loss process. This is an important result as it shows that photoionization is a significant loss process and larger than loss from radiation acceleration., Key Points Photoionization can be a significant loss process to the sodium exosphere with peak loss estimates of 4 × 1024 atoms/sThe photoionization loss process of Mercury's sodium exosphere varies throughout the planet's orbit around the SunMore sodium is lost due to photoionization on the inbound leg (true anomaly angle of 180°–360°) of Mercury's orbit than the outbound leg

We present a re‐examination of mass spectral data obtained from the Pioneer Venus Large Probe Neutral Mass Spectrometer. Our interpretations of differing trace chemical species are suggestive of redox disequilibria in Venus' middle clouds. Assignments to the data (at 51.3 km) include phosphine, hydrogen sulfide, nitrous acid, nitric acid, carbon monoxide, hydrochloric acid, hydrogen cyanide, ethane, and potentially ammonia, chlorous acid, and several tentative PxOy species. All parent ions were predicated upon assignment of corresponding fragmentation products, isotopologues, and atomic species. The data reveal parent ions at varying oxidation states, implying the presence of reducing power in the clouds, and illuminating the potential for chemistries yet to be discovered. When considering the hypothetical habitability of Venus' clouds, the assignments reveal a potential signature of anaerobic phosphorus metabolism (phosphine), an electron donor for anoxygenic photosynthesis (nitrite), and major constituents of the nitrogen cycle (nitrate, nitrite, ammonia, and N2)., Key Points Mass data from the Pioneer Venus Large Probe Neutral Mass Spectrometer reveals several trace chemical species suggestive of disequilibriaTrace species in the middle clouds include phosphine, hydrogen sulfide, nitrous acid, nitric acid, hydrogen cyanide, and carbon monoxideData reveal chemicals related to anaerobic phosphorus metabolism (phosphine), anoxygenic photosynthesis (nitrite), and the nitrogen cycle

We describe the capabilities, radiometric stability, and calibration of a custom vacuum environment chamber capable of simulating the near‐surface conditions of airless bodies. Here we demonstrate the collection of spectral measurements of a suite of fine particulate asteroid analogs made using the Planetary Analogue Surface Chamber for Asteroid and Lunar Environments (PASCALE) under conditions like those found on Earth and on airless bodies. The sample suite includes anhydrous and hydrated physical mixtures, and chondritic meteorites (CM, CI, CV, CR, and L5) previously characterized under Earth‐ and asteroid‐like conditions. And for the first time, we measure the terrestrial and extra‐terrestrial mineral end members used in the olivine‐ and phyllosilicate‐dominated physical mixtures under the same conditions as the mixtures and meteorites allowing us better understand how minerals combine spectrally when mixed intimately. Our measurements highlight the sensitivity of thermal infrared emissivity spectra to small amounts of low albedo materials and the composition of the sample materials. As the albedo of the sample decreases, we observe smaller differences between Earth‐ and asteroid‐like spectra, which results from a reduced thermal gradient in the upper hundreds of microns in the sample. These spectral measurements can be compared to thermal infrared emissivity spectra of asteroid (101955) Bennu's surface in regions where similarly fine particulate materials may be observed to infer surface compositions., Key Points Thermal infrared spectra of fine particulate minerals, physical mixtures of those minerals, and meteorites were measured under simulated Bennu conditionsComparisons of mineral, physical mixture, and meteorite spectra highlight the spectral behavior when materials are mixed in increasing complexityAs albedo decreases the spectral effects due to thermal gradients due to the vacuum environment of airless bodies are reduced

In the Late Noachian to Early Hesperian period, rivers transported detritus from igneous source terrains to a downstream lake within Gale crater, creating a stratified stack of fluviolacustrine rocks that is currently exposed along the slopes of Mount Sharp. Controversy exists regarding the paleoclimate that supported overland flow of liquid water at Gale crater, in large part because little is known about how chemical and mineralogical paleoclimate indicators from mafic‐rock dominated source‐to‐sink systems are translated into the rock record. Here, we compile data from basaltic terrains with varying climates on Earth in order to provide a reference frame for the conditions that may have prevailed during the formation of the sedimentary strata in Gale crater, particularly focusing on the Sheepbed and Pahrump Hills members. We calculate the chemical index of alteration for weathering profiles and fluvial sediments to better constrain the relationship between climate and chemical weathering in mafic terrains, a method that best estimates the cooler limit of climate conditions averaged over time. We also compare X‐ray diffraction patterns and mineral abundances from fluvial sediments in varying terrestrial climates and martian mudstones to better understand the influence of climate on secondary mineral assemblages in basaltic terrains. We show that the geochemistry and mineralogy of most of the fine‐grained sedimentary rocks in Gale crater display first‐order similarities with sediments generated in climates that resemble those of present‐day Iceland, while other parts of the stratigraphy indicate even colder baseline climate conditions. None of the lithologies examined at Gale crater resemble fluvial sediments or weathering profiles from warm (temperate to tropical) terrestrial climates., Key Points Terrestrial sediments and weathering profiles from basaltic terrains display first‐order similarities with mudstones from Gale crater, MarsThe chemical index of alteration can be used as paleoclimate proxy and places constraints on the ancient climate of Gale crater, MarsThe paleoclimate of Gale crater, Mars, was variable and ranged from Icelandic‐like conditions to colder climates

Planets intermediate in size between the Earth and Neptune, and orbiting closer to their host stars than Mercury does the Sun, are the most common type of planet revealed by exoplanet surveys over the last quarter century. Results from NASA's Kepler mission have revealed a bimodality in the radius distribution of these objects, with a relative underabundance of planets between 1.5 and 2.0 $R_{\oplus}$. This bimodality suggests that sub-Neptunes are mostly rocky planets that were born with primary atmospheres a few percent by mass accreted from the protoplanetary nebula. Planets above the radius gap were able to retain their atmospheres ("gas-rich super-Earths"), while planets below the radius gap lost their atmospheres and are stripped cores ("true super-Earths"). The mechanism that drives atmospheric loss for these planets remains an outstanding question, with photoevaporation and core-powered mass loss being the prime candidates. As with the mass-loss mechanism, there are two contenders for the origins of the solids in sub-Neptune planets: the migration model involves the growth and migration of embryos from beyond the ice line, while the drift model involves inward-drifting pebbles that coagulate to form planets close-in. Atmospheric studies have the potential to break degeneracies in interior structure models and place additional constraints on the origins of these planets. However, most atmospheric characterization efforts have been confounded by aerosols. Observations with upcoming facilities are expected to finally reveal the atmospheric compositions of these worlds, which are arguably the first fundamentally new type of planetary object identified from the study of exoplanets., Comment: Invited review in press in JGR: Planets special edition on exoplanets

Wind‐formed features are abundant in Oxia Planum (Mars), the landing site of the 2022 ExoMars mission, which shows geological evidence for a past wet environment. Studies of aeolian bedforms at the landing site were focused on assessing the risk for rover trafficability, however their potential in recording climatic fluctuations has not been explored. Here we show that the landing site experienced multiple climatic changes in the Amazonian, which are recorded by an intriguing set of ridges that we interpret as Periodic Bedrock Ridges (PBRs). Clues for a PBR origin result from ridge regularity, defect terminations, and the presence of preserved megaripples detaching from the PBRs. PBR orientation differs from superimposed transverse aeolian ridges pointing toward a major change in wind regime. Our results provide constrains on PBR formation mechanisms and offer indications on paleo winds that will be crucial for understanding the landing site geology., Key Points We present the first evidence for a periodic bedrock ridge (PBRs) pattern from the ExoMars 2022 landing siteFormative paleowind directions are extrapolated from PBRs and transverse aeolian ridgesEvidence for an Amazonian change in the wind regime are provided

The earliest atmospheres of rocky planets originate from extensive volatile release during magma ocean epochs that occur during assembly of the planet. These establish the initial distribution of the major volatile elements between different chemical reservoirs that subsequently evolve via geological cycles. Current theoretical techniques are limited in exploring the anticipated range of compositional and thermal scenarios of early planetary evolution, even though these are of prime importance to aid astronomical inferences on the environmental context and geological history of extrasolar planets. Here, we present a coupled numerical framework that links an evolutionary, vertically resolved model of the planetary silicate mantle with a radiative‐convective model of the atmosphere. Using this method, we investigate the early evolution of idealized Earth‐sized rocky planets with end‐member, clear‐sky atmospheres dominated by either H2, H2O, CO2, CH4, CO, O2, or N2. We find central metrics of early planetary evolution, such as energy gradient, sequence of mantle solidification, surface pressure, or vertical stratification of the atmosphere, to be intimately controlled by the dominant volatile and outgassing history of the planet. Thermal sequences fall into three general classes with increasing cooling timescale: CO, N2, and O2 with minimal effect, H2O, CO2, and CH4 with intermediate influence, and H2 with several orders of magnitude increase in solidification time and atmosphere vertical stratification. Our numerical experiments exemplify the capabilities of the presented modeling framework and link the interior and atmospheric evolution of rocky exoplanets with multiwavelength astronomical observations., Key Points Magma oceans with different volatiles display varying timescales of solidification, outgassing, and atmospheric stratificationAtmospheric blanketing and cooling time increase in three principle classes from N2, CO, O2 to H2O, CO2, CH4 to H2 Coupled mantle–atmosphere systems display distinctive features that link the interior and surface state to atmospheric spectrum and climate

The Mars Science Laboratory (MSL) Curiosity rover is exploring the Murray formation, a sequence of heterolithic mudstones and sandstones recording fluvial deltaic and lake deposits that comprise over 350 m of sedimentary strata within Gale crater. We examine >4,500 Murray formation bedrock points, employing recent laboratory calibrations for ChemCam laser‐induced breakdown spectroscopy H measurements at millimeter scale. Bedrock in the Murray formation has an interquartile range of 2.3–3.1 wt.% H2O, similar to measurements using the Dynamic Albedo of Neutrons and Sample Analysis at Mars instruments. However, specific stratigraphic intervals include high H targets (6–18 wt.% H2O) correlated with Si, Mg, Ca, Mn, or Fe, indicating units with opal, hydrated Mg sulfates, hydrated Ca sulfates, Mn‐enriched units, and akageneite or other iron oxyhydroxides, respectively. One stratigraphic interval with higher hydrogen is the Sutton Island unit and Blunts Point unit contact, where higher hydrogen is associated with Fe‐rich, Ca‐rich, and Mg‐rich points. A second interval with higher hydrogen occurs in the Vera Rubin ridge portion of the Murray formation, where higher hydrogen is associated with Fe‐rich, Ca‐rich, and Si‐rich points. We also observe trends in the H signal with grain size, separate from chemical variation, whereby coarser‐grained rocks have higher hydrogen. Variability in the hydrogen content of rocks points to a history of water‐rock interaction at Gale crater that included changes in lake water chemistry during Murray formation deposition and multiple subsequent groundwater episodes., Key Points Murray formation bedrock points measured by ChemCam have an interquartile range of 2.3–3.1 wt.% H2OSpecific intervals like the Vera Rubin ridge contain high H and indicate phases including iron oxyhydroxides, akageneite, and jarositeVariations in water content indicate changes in depositional lake water chemistry and multiple subsequent groundwater episodes

Visible/short‐wave infrared spectral data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) show absorptions attributed to hematite at Vera Rubin ridge (VRR), a topographic feature on northwest Mt. Sharp. The goals of this study are to determine why absorptions caused by ferric iron are strongly visible from orbit at VRR and to improve interpretation of CRISM data throughout lower Mt. Sharp. These goals are achieved by analyzing coordinated CRISM and in situ spectral data along the Curiosity Mars rover's traverse. VRR bedrock within areas that have the deepest ferric absorptions in CRISM data also has the deepest ferric absorptions measured in situ. This suggests strong ferric absorptions are visible from orbit at VRR because of the unique spectral properties of VRR bedrock. Dust and mixing with basaltic sand additionally inhibit the ability to measure ferric absorptions in bedrock stratigraphically below VRR from orbit. There are two implications of these findings: (1) Ferric absorptions in CRISM data initially dismissed as noise could be real, and ferric phases are more widespread in lower Mt. Sharp than previously reported. (2) Patches with the deepest ferric absorptions in CRISM data are, like VRR, reflective of deeper absorptions in the bedrock. One model to explain this spectral variability is late‐stage diagenetic fluids that changed the grain size of ferric phases, deepening absorptions. Curiosity's experience highlights the strengths of using CRISM data for spectral absorptions and associated mineral detections and the caveats in using these data for geologic interpretations and strategic path planning tools., Key Points Areas on Vera Rubin ridge with deep ferric absorptions from orbit also have deep ferric absorptions in Curiosity spectral data setsFerric phases are more widespread on Mt. Sharp than originally reported. Diagenesis deepened ferric absorptions in several locationsCombining orbital and in situ observations enhances planetary exploration

Many boulders on (101955) Bennu, a near‐Earth rubble pile asteroid, show signs of in situ disaggregation and exfoliation, indicating that thermal fatigue plays an important role in its landscape evolution. Observations of particle ejections from its surface also show it to be an active asteroid, though the driving mechanism of these events is yet to be determined. Exfoliation has been shown to mobilize disaggregated particles in terrestrial environments, suggesting that it may be capable of ejecting material from Bennu's surface. We investigate the nature of thermal fatigue on the asteroid, and the efficacy of fatigue‐driven exfoliation as a mechanism for generating asteroid activity, by performing finite element modeling of stress fields induced in boulders from diurnal cycling. We develop a model to predict the spacing of exfoliation fractures and the number and speed of particles that may be ejected during exfoliation events. We find that crack spacing ranges from ~1 mm to 10 cm and disaggregated particles have ejection speeds up to ~2 m/s. Exfoliation events are most likely to occur in the late afternoon. These predictions are consistent with observed ejection events at Bennu and indicate that thermal fatigue is a viable mechanism for driving asteroid activity. Crack propagation rates and ejection speeds are greatest at perihelion when the diurnal temperature variation is largest, suggesting that events should be more energetic and more frequent when closer to the Sun. Annual thermal stresses that arise in large boulders may influence the spacing of exfoliation cracks or frequency of ejection events., Key Points We simulated stress fields in boulders to assess the nature and efficacy of thermal breakdown on Bennu, including by exfoliationOur model predicts that exfoliation is capable of ejecting centimeter‐scale particles from the asteroid at speeds of meters per secondThis mechanism is consistent with observations of particle ejection at Bennu and is a viable explanation for Bennu's activity

In the first 20 orbits of the Juno spacecraft around Jupiter, we have identified a variety of wave‐like features in images made by its public‐outreach camera, JunoCam. Because of Juno's unprecedented and repeated proximity to Jupiter's cloud tops during its close approaches, JunoCam has detected more wave structures than any previous surveys. Most of the waves appear in long wave packets, oriented east‐west and populated by narrow wave crests. Spacing between crests were measured as small as ~30 km, shorter than any previously measured. Some waves are associated with atmospheric features, but others are not ostensibly associated with any visible cloud phenomena and thus may be generated by dynamical forcing below the visible cloud tops. Some waves also appear to be converging, and others appear to be overlapping, possibly at different atmospheric levels. Another type of wave has a series of fronts that appear to be radiating outward from the center of a cyclone. Most of these waves appear within 5° of latitude from the equator, but we have detected waves covering planetocentric latitudes between 20°S and 45°N. The great majority of the waves appear in regions associated with prograde motions of the mean zonal flow. Juno was unable to measure the velocity of wave features to diagnose the wave types due to its close and rapid flybys. However, both by our own upper limits on wave motions and by analogy with previous measurements, we expect that the waves JunoCam detected near the equator are inertia‐gravity waves., Key Points In the first 20 orbits of the Juno mission, over 150 waves and wave‐like features have been detected by the JunoCam public‐outreach cameraA wide variety of wave morphologies were detected over a wide latitude range, but the great majority were found near Jupiter's equatorBy analogy with previous studies of waves in Jupiter's atmosphere, most of the waves detected are likely to be inertia‐gravity waves

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray‐colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe‐rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric‐related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record., Key Points We summarize Curiosity's campaign at Vera Rubin ridge (Sols 1726–2302) and the high‐level results from articles in this special issueVera Rubin ridge formed when diagenesis hardened rocks along the base of Aeolis Mons; wind subsequently etched the feature into a ridgeResults add evidence for protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record

Geochemical models of secondary mineral precipitation on Mars generally assume semiopen systems (open to the atmosphere but closed at the water‐sediment interface) and equilibrium conditions. However, in natural multicomponent systems, the reactive surface area of primary minerals controls the dissolution rate and affects the precipitation sequences of secondary phases, and simultaneously, the transport of dissolved species may occur through the atmosphere‐water and water‐sediment interfaces. Here we present a suite of geochemical models designed to analyze the formation of secondary minerals in basaltic sediments on Mars, evaluating the role of (i) reactive surface areas and (ii) the transport of ions through a basalt sediment column. We consider fully open conditions, both to the atmosphere and to the sediment, and a kinetic approach for mineral dissolution and precipitation. Our models consider a geochemical scenario constituted by a basin (i.e., a shallow lake) where supersaturation is generated by evaporation/cooling and the starting point is a solution in equilibrium with basaltic sediments. Our results show that cation removal by diffusion, along with the input of atmospheric volatiles and the influence of the reactive surface area of primary minerals, plays a central role in the evolution of the secondary mineral sequences formed. We conclude that precipitation of evaporites finds more restrictions in basaltic sediments of small grain size than in basaltic sediments of greater grain size., Key Points Fully open (simultaneously to the atmosphere and sediment interfaces) kinetic models to track the formation of clays and evaporites on MarsAnalyses of cation removal by diffusion and by adsorption to clays, input of atmospheric volatiles, and reactive surface area of basaltPrecipitation of evaporites more restricted in basaltic sediments of small size than in basaltic sediments of greater size

Some years ago, the consensus was that asteroid (16) Psyche was almost entirely metal. New data on density, radar properties, and spectral signatures indicate that the asteroid is something perhaps even more enigmatic: a mixed metal and silicate world. Here we combine observations of Psyche with data from meteorites and models for planetesimal formation to produce the best current hypotheses for Psyche's properties and provenance. Psyche's bulk density appears to be between 3,400 and 4,100 kg m−3. Psyche is thus predicted to have between ~30 and ~60 vol% metal, with the remainder likely low‐iron silicate rock and not more than ~20% porosity. Though their density is similar, mesosiderites are an unlikely analog to bulk Psyche because mesosiderites have far more iron‐rich silicates than Psyche appears to have. CB chondrites match both Psyche's density and spectral properties, as can some pallasites, although typical pallasitic olivine contains too much iron to be consistent with the reflectance spectra. Final answers, as well as resolution of contradictions in the data set of Psyche physical properties, for example, the thermal inertia measurements, may not be resolved until the NASA Psyche mission arrives in orbit at the asteroid. Despite the range of compositions and formation processes for Psyche allowed by the current data, the science payload of the Psyche mission (magnetometers, multispectral imagers, neutron spectrometer, and a gamma‐ray spectrometer) will produce data sets that distinguish among the models., Key Points New observations of asteroid (16) Psyche's physical properties indicate a different composition and properties than earlier data had shownThe best current analysis indicates that Psyche's density is 3,400‐4,100 kg m‐3, indicating a mixture of rock with 30‐60 vol% metalContradictions in data of Psyche physical properties may not be resolved until the NASA Psyche mission arrives at the asteroid

The impact of Mars's 2018 Global Dust Storm (GDS) on surface and near‐surface air temperatures was investigated using an assimilation of Mars Climate Sounder observations. Rather than simply resulting in cooling everywhere from solar absorption (average surface radiative flux fell 26 W/m2), the globally averaged result was a 0.9‐K surface warming. These diurnally averaged surface temperature changes had a novel, highly nonuniform spatial structure, with up to 16‐K cooling/19‐K warming. Net warming occurred in low thermal inertia regions, where rapid nighttime radiative cooling was compensated by increased longwave emission and scattering. This caused strong nightside warming, outweighing dayside cooling. The reduced surface‐air temperature gradient closely coupled surface and air temperatures, even causing local dayside air warming. Results show good agreement with Mars Climate Sounder surface temperature retrievals. Comparisons with the 2001 GDS and free‐running simulations show that GDS spatial structure is crucial in determining global surface temperature effects., Key Points Mars's 2018 Global Dust Storm caused a 0.9‐K globally averaged surface warming but with local 16‐K cooling/19‐K warmingThe magnitude of dayside cooling was controlled by atmospheric dust, and nightside warming by surface thermal inertiaThe effects were strongly nonuniform, with high dust loading causing net warming (cooling) over low (high) thermal inertia continents

The Mars Science Laboratory Curiosity rover is traversing a sequence of stratified sedimentary rocks in Gale crater that contain varied eolian, fluviodeltaic, and lake deposits, with phyllosilicates, iron oxides, and sulfate salts. Here, we report the chloride salt distribution along the rover traverse. Chlorine is detected at low levels (, Key Points Isolated Cl enrichments in bedrock, in nodular textures, and at calcium sulfate vein margins, correlated with Na, indicate haliteMapping of Cl along the Curiosity traverse in Gale Crater indicates Cl enrichments are more common in select Murray formation membersThe scattered, isolated occurrences of chlorides are consistent with late groundwater reworking and remobilization of original deposits

Thermal neutron emissions from the lunar surface provide a direct measure of bulk elemental composition that can be used to constrain the chemical properties of near‐surface (depth 85%, are generally associated with large impact basins and are colocated with clusters of nearly pure plagioclase identified with spectral reflectance data., Key Points We report the first map of macroscopic neutron absorption for the lunar surfaceElemental composition and variability across the lunar highlands is discussedLarge (>45 km diameter) locations with >85 wt % plagioclase content are identified

Previous studies suggested that, generally, the climate of early Mars would have been semi-arid when the surface temperatures were above freezing. On early Mars, closed-basin lakes would have been created, however, the hydrogeochemical cycles of the lake systems are poorly constrained. Here we report results of our field surveys to terrestrial analogs of closed-basin lake systems that developed in cold and semi-arid climates: The Valley of the Gobi Lakes of Mongolia. Our results show that groundwater plays a central role not only in hydrology, but also in geochemical cycles in the lake systems. We find that groundwater predominantly flows into the lakes through local seepage and regional flows in semi-arid climates. Through the interactions with calcite-containing soils, local groundwater seepage provides Ca2+ and HCO3&minus, to the lakes. In the wetland located in between the lakes, high-salinity shallow pools would provide Cl&minus, and Na+ to the groundwater through infiltration. If similar processes occurred on early Mars, local seepage of groundwater would have provided magnesium and alkalinity to the early Jezero lakes, possibly leading to authigenic precipitation of lacustrine carbonates. On early Mars, infiltration of surface brine may have transported salts and oxidants on the surface to lakes via regional groundwater flows. We suggest that inflows of multiple types of groundwater in semi-arid climates could have caused redox disequilibria in closed-basin lakes on early Mars.

Recent measurements by the Imaging Ultraviolet Spectrograph (IUVS) instrument on NASA's Mars Atmosphere and Volatile EvolutioN mission show that a persistent layer of Mg+ ions occurs around 90 km in the Martian atmosphere but that neutral Mg atoms are not detectable. These observations can be satisfactorily modeled with a global meteoric ablation rate of 0.06 t sol−1, out of a cosmic dust input of 2.7 ± 1.6 t sol−1. The absence of detectable Mg at 90 km requires that at least 50% of the ablating Mg atoms ionize through hyperthermal collisions with CO2 molecules. Dissociative recombination of MgO+.(CO2)n cluster ions with electrons to produce MgCO3 directly, rather than MgO, also avoids a buildup of Mg to detectable levels. The meteoric injection rate of Mg, Fe, and other metals—constrained by the IUVS measurements—enables the production rate of metal carbonate molecules (principally MgCO3 and FeCO3) to be determined. These molecules have very large electric dipole moments (11.6 and 9.2 Debye, respectively) and thus form clusters with up to six H2O molecules at temperatures below 150 K. These clusters should then coagulate efficiently, building up metal carbonate‐rich ice particles which can act as nucleating particles for the formation of CO2‐ice clouds. Observable mesospheric clouds are predicted to occur between 65 and 80 km at temperatures below 95 K and above 85 km at temperatures about 5 K colder., Key Points A meteoric input function for Mars is generated by combining a cosmic dust input of ~3 tonnes sol−1 with a chemical ablation modelMAVEN/IUVS observations of Mg+, and a small upper limit for Mg, suggest that around 50% of Mg atoms ionize directly after ablationMgCO3 and FeCO3 form stable H2O clusters which coagulate to metal‐rich ice particles, likely nuclei for clouds in the Martian mesosphere

The Mars Atmosphere and Volatile EvolutioN (MAVEN) Neutral Gas and Ion Mass Spectrometer (NGIMS) provides sensitive detections of neutral gas and ambient ion composition. NGIMS measurements of nine atomic and molecular neutral species, and their variation with altitude, latitude, and solar zenith angle are reported over several months of operation of the MAVEN mission. Sampling NGIMS signals from multiple neutral species every several seconds reveals persistent and unexpectedly large amplitude density structures. The scale height temperatures are mapped over the course of the first few months of the mission from high down to midlatitudes. NGIMS measurements near the homopause of 40Ar/N2 ratios agree with those reported by the Sample Analysis at Mars investigation and allow the altitude of the homopause for the most abundant gases to be established., Key Points Neutral density structure measured with high temporal resolutionScale height temperature of the upper atmosphere reportedHomopause altitude identified

Dust uplift is a nonlinear thresholded function of wind speed and therefore particularly sensitive to the long tails of observed wind speed probability density functions. This suggests that a few rare high‐wind events can contribute substantially to annual dust emission. Here we quantify the relative roles of different wind speeds to dust‐generating winds using surface synoptic observations of dust emission and wind from northern Africa. The results show that winds between 2 and 5 m s−1 above the threshold cause the most emission. Of the dust‐generating winds, 25% is produced by very rare events occurring only at 0.1 to 1.4% of the time, depending on the region. Dust‐producing winds are underestimated in ERA‐I, since it misses the long tail found in observations. ERA‐I overpredicts (underpredicts) the frequency of emission strength winds in the southern (northern) regions. These problems cannot be solved by simple tunings. Finally, we show that rare events make the largest contribution to interannual variability in dust‐generating winds and that ERA severely underestimates this interannual variability., Key Points Winds between 2 and 5 m/s above emission thresholds dominate emissionEvents occurring at 0.1 to 1.4% of the time cause 25% of dust‐generating windsTuning cannot correct ERA‐I, which does not capture interannual variability

In the vicinity of Europa, Galileo observed bursty Alfv\'en-cyclotron wave power at the gyrofrequencies of a number of species including K$^+$, O$_2^+$, Na$^+$, and Cl$^+$, indicating the localised pickup of these species. Additional evidence for the presence of chlorine was the occurrence of both left-hand (LH) and right-hand (RH) polarized transverse wave power near the Cl$^{+}$ gyrofrequency, thought to be due to the pickup of both Cl$^+$ and the easily formed chlorine anion, Cl$^-$. To test this hypothesis we use one-dimensional hybrid (kinetic ion, massless fluid electron) simulations for both positive and negative pickup ions and self-consistently reproduce the growth of both LH and RH Alfv\'en-cyclotron waves in agreement with linear theory. We show how the simultaneous generation of LH and RH waves can result in nongyrotropic ion distributions and increased wave amplitudes, and how even trace quantities of negative pickup ions are able to generate an observable RH signal. Through comparing simulated and observed wave amplitudes, we are able to place the first constraints on the densities of chlorine pickup ions in localised regions at Europa., Comment: 13 pages 10 figures, 3 tables, published as a Journal of Geophysical Research article

The Mars Science Laboratory Curiosity rover performed coordinated measurements to examine the textures and compositions of aeolian sands in the active Bagnold dune field. The Bagnold sands are rounded to subrounded, very fine to medium sized (~45–500 μm) with ≥6 distinct grain colors. In contrast to sands examined by Curiosity in a dust‐covered, inactive bedform called Rocknest and soils at other landing sites, Bagnold sands are darker, less red, better sorted, have fewer silt‐sized or smaller grains, and show no evidence for cohesion. Nevertheless, Bagnold mineralogy and Rocknest mineralogy are similar with plagioclase, olivine, and pyroxenes in similar proportions comprising >90% of crystalline phases, along with a substantial amorphous component (35% ± 15%). Yet Bagnold and Rocknest bulk chemistry differ. Bagnold sands are Si enriched relative to other soils at Gale crater, and H2O, S, and Cl are lower relative to all previously measured Martian soils and most Gale crater rocks. Mg, Ni, Fe, and Mn are enriched in the coarse‐sieved fraction of Bagnold sands, corroborated by visible/near‐infrared spectra that suggest enrichment of olivine. Collectively, patterns in major element chemistry and volatile release data indicate two distinctive volatile reservoirs in Martian soils: (1) amorphous components in the sand‐sized fraction (represented by Bagnold) that are Si‐enriched, hydroxylated alteration products and/or H2O‐ or OH‐bearing impact or volcanic glasses and (2) amorphous components in the fine fraction (, Key Points Because of ongoing aeolian activity, the Bagnold dunes consist of well‐sorted sands and lack the finer grains typical of Martian soilsDune sands are chemically distinct with elevated Si, Mg, and Ni and lower H2O, S, and Cl relative to all previously measured Martian finesTwo distinct, water‐/OH‐bearing amorphous components are identified: Fe‐, S‐, and Cl‐rich material in dust and Si‐rich material in the sands

We have developed a refined geologic map and stratigraphy for lower Mount Sharp using coordinated analyses of new spectral, thermophysical, and morphologic orbital data products. The Mount Sharp group consists of seven relatively planar units delineated by differences in texture, mineralogy, and thermophysical properties. These units are (1–3) three spatially adjacent units in the Murray formation which contain a variety of secondary phases and are distinguishable by thermal inertia and albedo differences, (4) a phyllosilicate‐bearing unit, (5) a hematite‐capped ridge unit, (6) a unit associated with material having a strongly sloped spectral signature at visible near‐infrared wavelengths, and (7) a layered sulfate unit. The Siccar Point group consists of the Stimson formation and two additional units that unconformably overlie the Mount Sharp group. All Siccar Point group units are distinguished by higher thermal inertia values and record a period of substantial deposition and exhumation that followed the deposition and exhumation of the Mount Sharp group. Several spatially extensive silica deposits associated with veins and fractures show that late‐stage silica enrichment within lower Mount Sharp was pervasive. At least two laterally extensive hematitic deposits are present at different stratigraphic intervals, and both are geometrically conformable with lower Mount Sharp strata. The occurrence of hematite at multiple stratigraphic horizons suggests redox interfaces were widespread in space and/or in time, and future measurements by the Mars Science Laboratory Curiosity rover will provide further insights into the depositional settings of these and other mineral phases., Key Points We have developed a stratigraphy for lower Mount Sharp using analyses of new spectral, thermophysical, and morphologic orbital data productsSiccar Point group records a period of deposition and exhumation that followed the deposition and exhumation of the Mount Sharp groupLate state silica enrichment and redox interfaces within lower Mount Sharp were pervasive and widespread in space and/or in time

Recent observations of the Martian surface by the Phoenix lander and the Sample Analysis at Mars indicate the presence of perchlorate (ClO4 –). The abundance and isotopic composition of these perchlorates suggest that the mechanisms responsible for their formation in the Martian environment may be unique in our solar system. With this in mind, we propose a potential mechanism for the production of Martian perchlorate: the radiolysis of the Martian surface by galactic cosmic rays, followed by the sublimation of chlorine oxides into the atmosphere and their subsequent synthesis to form perchloric acid (HClO4) in the atmosphere, and the surface deposition and subsequent mineralization of HClO4 in the regolith to form surface perchlorates. To evaluate the viability of this mechanism, we employ a one‐dimensional chemical model, examining chlorine chemistry in the context of Martian atmospheric chemistry. Considering the chlorine oxide, OClO, we find that an OClO flux as low as 3.2 × 107 molecules cm–2 s–1 sublimated into the atmosphere from the surface could produce sufficient HClO4 to explain the perchlorate concentration on Mars, assuming an accumulation depth of 30 cm and integrated over the Amazonian period. Radiolysis provides an efficient pathway for the oxidation of chlorine, bypassing the efficient Cl/HCl recycling mechanism that characterizes HClO4 formation mechanisms proposed for the Earth but not Mars., Key Points Mechanism initiated by radiolysis in the surface can potentially account for observed Martian perchlorate concentrationsInjection of oxides of chlorine from the surface into the atmosphere is potentially an effective way of forming perchloric acidMartian perchlorate is an important oxidant but poorly characterized

Observations of the green and red-doublet emission lines have previously been realized for several comets. We present here a chemistry-emission coupled model to study the production and loss mechanisms of the O(1S) and O(1D) states, which are responsible for the emission lines of interest for comet 67P/Churyumov-Gerasimenko. The recent discovery of O2 in significant abundance relative to water 3.80 ± 0.85 within the coma of 67P has been taken into consideration for the first time in such models. We evaluate the effect of the presence of O2 on the green to red-doublet emission intensity ratio, which is traditionally used to assess the CO2 abundance within cometary atmospheres. Model simulations, solving the continuity equation with transport, show that not taking O2 into account leads to an underestimation of the CO2 abundance within 67P, with a relative error of about 25%. This strongly suggests that the green to red-doublet emission intensity ratio alone is not a proper tool for determining the CO2 abundance, as previously suggested. Indeed, there is no compelling reason why O2 would not be a common cometary volatile, making revision of earlier assessments regarding the CO2 abundance in cometary atmospheres necessary. The large uncertainties of the CO2 photodissociation cross section imply that more studies are required in order to better constrain the O(1S) and O(1D) production through this mechanism. Space weather phenomena, such as powerful solar flares, could be used as tools for doing so, providing additional information on a good estimation of the O2 abundance within cometary atmospheres., FLWOA, info:eu-repo/semantics/published

An edited version of this paper was published by AGU. Copyright (2015) American Geophysical Union, Lithium (Li), the lightest of the alkali elements, has geochemical properties that include high aqueous solubility (Li is the most fluid mobile element) and high relative abundance in basalt-forming minerals (values ranking between 0.2 and 12 ppm). Li isotopes are particularly subject to fractionation because the two stable isotopes of lithium - 7Li and 6Li - have a large relative mass difference (∼15%) that results in significant fractionation between water and solid phases. The extent of Li isotope fractionation during aqueous alteration of basalt depends on the dissolution rate of primary minerals - the source of Li - and on the precipitation kinetics, leading to formation of secondary phases. Consequently, a detailed analysis of Li isotopic ratios in both solution and secondary mineral lattices could provide clues about past Martian weathering conditions, including weathering extent, temperature, pH, supersaturation, and evaporation rate of the initial solutions in contact with basalt rocks. In this paper, we discuss ways in which Martian aqueous processes could have lead to Li isotope fractionation. We show that Li isotopic data obtained by future exploration of Mars could be relevant to highlighting different processes of Li isotopic fractionation in the past, and therefore to understanding basalt weathering and environmental conditions early in the planet's history, Data supporting our models and calculations are available as supporting information. The research leading to these results is a contribution from the Project ‘icyMARS’’, funded by the European Research Council, Starting Grant no 307496. This work was also partially supported by the European FEDER program and the Spanish Ministry of Science (MICINN) through the project CGL2011–30079. Comments by R. James and four anonymous reviewers helped us to clarify and strengthen our work

Times Cited: 22 Isotopic studies indicate that natural perchlorate is produced on Earth in arid environments by the oxidation of chlorine species through pathways involving ozone or its photochemical products. With this analogy, we propose that the arid environment on Mars may have given rise to perchlorate through the action of atmospheric oxidants. A variety of hypothetical pathways can be proposed including photochemical reactions, electrostatic discharge, and gas-solid reactions. Because perchlorate-rich deposits in the Atacama desert are closest in abundance to perchlorate measured at NASA's Phoenix Lander site, we made a preliminary study of the means to produce Atacama perchlorate to help shed light on the origin of Martian perchlorate. We investigated gas phase pathways using a 1-D photochemical model. We found that perchlorate can be produced in sufficient quantities to explain the abundance of perchlorate in the Atacama from a proposed gas phase oxidation of chlorine volatiles to perchloric acid. The feasibility of gas phase production for the Atacama provides justification for future investigations of gas phase photochemistry as a possible source for Martian perchlorate. Publisher PDF

International audience; In order to study the evolution of the primitive atmosphere of Venus, we developped a time dependent model of hydrogen hydrodynamic escape powered by solar EUV (Extreme UV) flux and solar wind, and accounting for oxygen frictional escape We study specifically the isotopic fractionation of noble gases resulting from hydrodynamic escape. The fractionation’s primary cause is the effect of diffusive/gravitational separation between the homopause and the base of the escape. Heavy noble gases such as Kr and Xe are not fractionated. Ar is only marginally fractionated whereas Ne is moderately fractionated. We also take into account oxygen dragged off along with hydrogen by hydrodynamic process. In that case, most of the available energy is consumed by oxygen and the amount of energy available for the escape of hydrogen is reduced by one order of magnitude. We find nonetheless scenarios that are compatible with present-day Ne and Ar fractionation in Venus atmosphere. Our model suggests that during the first 100 Myr of the planetary accretion of Venus, no more than the content of five terrestrial oceans (5 TO) of water have been lost to space. Our preferred scenario shows that around 60% of the oxygen contained in this water was left behind in the atmosphere. During the end of the accretion, the atmospheric water vapor pressure could have been maintained at the value required to maintain the surface temperature above the liquidus. We argue that hydrodynamic escape could have controlled the solidification rate of the magma ocean during the end of the accretion period by pumping the water out of the magma, through the atmosphere, remaining at a pressure of around 300 bar. After most of the water in the magma has been extracted, the atmosphere progressively dried up, and the magma ocean crystallized, leading to a final collapse of the hydrodynamic escape. The end of the hydrodynamic escape phase and the crystallization of the primitive magma ocean would thus roughly coincide and have occurred around 100 Myr. Since hydrodynamic escape would leave large amounts of oxygen that are not found in the present day atmosphere, an efficient mechanism has removed it. We propose that this mechanism is the dissolution of oxygen in the magma ocean and the ultimate oxidation of ferrous iron into ferric iron. From 100 Myr to 500 Myr, the hydrogen of the water delivered by a late veneer of comets could have been removed by continued thermal escape of hydrogen only. The energy available then would have been insufficient to allow oxygen to be dragged off along with hydrogen. At 500 Myr, on Venus would be left a water global equivalent layer (GEL) of a few meters depth and a dense molecular oxygen atmosphere of around 15 bar would have been left at the surface of Venus. At later times non-thermal mechanisms (pick-up ion escape) may have removed most of the remaining water and led to the present D/H ratio. The 15 bar of oxygen may have been lost to crustal oxidation if the resurfacing and oxidation rates have been high enough during the last past 4 billion years.

Martian lava flows likely acquired S-rich material from the regolith during their emplacement on the planet’s surface. We investigated five of the twenty known nakhlites (Nakhla, Lafayette, Miller Range (MIL) 090032, Yamato 000593, and Yamato 000749) to determine whether these lavas show evidence of regolith assimilation, and to constrain the potential implications that this process has on chemical tracing of martian mantle source(s). To establish the proportionate influence of atmospheric, hydrothermal, and volcanic processes on nakhlite isotopic systematics we obtained in situ sulphur isotope data (Δ33S and δ34S) for sulphide grains (pyrrhotite and pyrite) in all five nakhlite samples. For Nakhla, Lafayette, and MIL 090032, these data are integrated with highly siderophile element (HSE) abundances and Os-isotope compositions, as well as textural information constrained prior to isotopic analysis. This work thereby provides the first Re-Os isotope systematics for two different nakhlites, and also the first Re-Os isotope data for martian sample for which detailed petrographic information was constrained prior to digestion. We report the largest variation in δ34S yet found in martian meteorites (−13.20‰ to +15.16‰). The relatively positive Δ33S and δ34S values of MIL 090032 (δ34S = +10.54 ± 0.09‰; Δ33S = −0.67 ± 0.10‰) indicate this meteorite assimilated sulphur affected by UV-photochemistry. In contrast, the strongly negative values of Lafayette (δ34S = −10.76 ± 0.14‰; Δ33S = −0.09 ± 0.12‰) are indicative of hydrothermal processes on Mars. Nakhla, Yamato 000593, and Yamato 000749 sulphides have a narrower range of sulphur isotope compositions (Δ33S and δ34S ∼ 0) that is consistent with no assimilation of martian surface materials during lava flow emplacement. Consequently we used this second group of Δ33S values to approximate the Δ33S of the nakhlite source, yielding a Δ33S value of −0.1‰. Nakhlite HSE patterns result from a sulphide-saturated melt where Ru-Os-Ir alloys/sulphide were likely crystallized during earlier phases of magmatic processing in Mars to result in the fractionated HSE patterns of the nakhlites. Our data, alongside a synthesis of previously published data, suggest assimilation of an enriched component to the primary nakhlite melt, potentially a late-stage crystallization cumulate from the martian magma ocean stage. In the context of this model, and within large uncertainties, our data hint at perturbation and potential decoupling of nakhlite Re-Os isotope systematics from other isotopic systems as a result of small degrees of assimilation of a regolith component with highly radiogenic 187Os/188Os.