Search

Spent coffee grounds (SCG) are a coproduct that causes environmental impacts worldwide. Thus, consciously reusing the SCG is an eminent need. This work aimed to encapsulate phenolic compounds and antioxidants obtained from SCG extracts through spray- and freeze-drying techniques using different isolated and combined wall materials. The dried powders produced were evaluated for moisture content, water activity, bulk density, hygroscopicity, color, content of phenolic compounds and antioxidants, and the results were compared. The results showed that all evaluated treatments resulted in a powdered product with low values of bulk density, moisture and water activity, especially for freeze-drying. The freeze-dried product also showed higher hygroscopicity. Regarding the content of phenolic compounds and antioxidants, both drying methods showed high levels of these compounds in the dried product and good encapsulation efficiency, reaching 83.43%. In most cases, spray-drying and freeze-drying did not differ statistically (p > 0.05) in relation to bioactive compound content and encapsulation efficiency. In relation to wall materials, albumin showed the worst performance in the retention of bioactive compounds. On the other hand, pure gum arabic combined with maltodextrin led to better preservation of these compounds. PRACTICAL APPLICATION: Spent coffee grounds are a coproduct generated in large quantities in the world. The encapsulation of phenolic and antioxidant compounds protects and enables their application in different food matrices. Therefore, the evaluation of different encapsulation methods and wall materials is important to define good process conditions., (© 2022 Institute of Food Technologists®.)

Coffee silverskin is a coproduct that has a rich composition in bioactive compounds. However, most of these compounds are susceptible to the conditions used during food processing and storage. Encapsulation is a process of great interest to increase the stability of these bioactive compounds, and different methods can influence the final characteristics of the product. Therefore, this study aimed to evaluate the encapsulation methods by foam mat drying, spray drying and freeze-drying for producing powder from coffee silverskin extracts. Density, porosity, overrun, and stability foam were evaluated and the physicochemical properties of powders, such as water activity, moisture, wettability, hygroscopicity, solubility, color, antioxidant activity, and total phenolic were determined. The optimal condition required for the feed mixture for foam formation was 7.6% gum arabic, 2% maltodextrin, and 10.4% egg albumin. All methods presented powders with desirable values of water activity, moisture content, and hygroscopicity, being considered stable for storage, and high content of bioactive compounds. Higher temperatures for foam mat drying produced powders with higher encapsulation efficiency (>77%) and longer wettability than lower temperatures (50 and 60°C). Therefore, this study verified that foam mat drying can be considered an efficient and promising method for encapsulating bioactive compounds from coffee silverskin extract. PRACTICAL APPLICATION: Foam mat drying can be considered an alternative method to conventional encapsulation by spray drying and freeze-drying. This method is simple, inexpensive, and generates high-quality products. Optimization of foam properties is necessary to ensure successful drying., (© 2022 Institute of Food Technologists®.)

Background: The chemical compounds in coffee are important indicators of quality. Its composition varies according to several factors related to the planting and processing of coffee. Thus, this study proposed to use near-infrared spectroscopy (NIR) associated with partial least squares (PLS) regression to estimate quickly some chemical properties (moisture content, soluble solids, and total and reducing sugars) in intact green coffee samples. For this, 250 samples produced in Brazil were analyzed in the laboratory by the standard method and also had their spectra recorded., Results: The calibration models were developed using PLS regression with cross-validation and tested in a validation set. The models were elaborated using original spectra and preprocessed by five different mathematical methods. These models were compared in relation to the coefficient of determination, root mean square error of cross-validation (RMSECV), root mean square error of test set validation (RMSEP), and ratio of performance to deviation (RPD) and demonstrated different predictive capabilities for the chemical properties of coffee. The best model was obtained to predict grain moisture and the worst performance was observed for the soluble solids model. The highest determination coefficients obtained for the samples in the validation set were equal to 0.810, 0.516, 0.694 and 0.781 for moisture, soluble solids, total sugar, and reducing sugars, respectively., Conclusion: The statistics associated with these models indicate that NIR technology has the potential to be applied routinely to predict the chemical properties of green coffee, and in particular, for moisture analysis. However, the soluble solid and total sugar content did not show high correlations with the spectroscopic data and need to be improved. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

The fish processing industry generates a large amount of materials discarded as residue. It is known that fish and its residue are a source of essential nutrients. Conversely, bread is a food accessible to different social classes but is deficient in protein, minerals, and fatty acids. Thus, this study aimed to develop bread products based on the addition of flour from Red-tailed Brycon (Brycon cephalus) processing residue and then evaluate the chemical and sensory qualities of the products. In relation to a standard bread formulation without fish flour, the addition of fish flour to bread formulations resulted in products with not only higher contents of protein, essential fatty acids, and minerals, especially calcium and phosphorus, but also lower contents of carbohydrates. The breads with fish flour received sensory acceptance better than or as good as that of a bread formulation without fish flour. Hence, the addition of fish processing residue to breads is a way to provide essential nutrients to the population through a well-accepted, accessible, and low-cost product.

This study aimed to develop a type of hamburger meat product and evaluate the physical features and sensory formulations of oatmeal flour, flour of green banana pulp, flour of green banana peel, flour of apple peel and pulp of Green Banana as fat substitutes. Regarding color, the formulations containing fat substitutes based on green banana presented lower values for b* and L*. Hamburgers with added oatmeal and apple peel flour obtained high values of a* and low values of L*, producing the reddest burgers. Substitutes based on green banana differed from others, resulting in a higher yield of burgers and water-holding capacity during cooking, besides having lower toughness and less shrinkage. The sensory acceptance test for untrained consumers suggests that the flour of peel and pulp of green banana, and oatmeal flour are excellent choices for fat-substitution in beef burger. Although fat contributes to a series of physical and sensory attributes such as softness, juiciness and yield, it is possible to reduce the lipid content in beef burgers without depreciating the quality of food through the use of the following fat substitutes: oat flour, apple peel flour, green banana pulp flour, green banana peel flour and green banana pulp.

Purpose: To analyze associations between mammographic arterial mammary calcifications in menopausal women and risk factors for cardiovascular disease., Methods: This was a cross-sectional retrospective study, in which we analyzed the mammograms and medical records of 197 patients treated between 2004 and 2005. Study variables were: breast arterial calcifications, stroke, acute coronary syndrome, age, obesity, diabetes mellitus, smoking, and hypertension. For statistical analysis, we used the Mann-Whitney, χ2 and Cochran-Armitage tests, and also evaluated the prevalence ratios between these variables and mammary artery calcifications. Data were analyzed with the SAS version 9.1 software., Results: In the group of 197 women, there was a prevalence of 36.6% of arterial calcifications on mammograms. Among the risk factors analyzed, the most frequent were hypertension (56.4%), obesity (31.9%), smoking (15.2%), and diabetes (14.7%). Acute coronary syndrome and stroke presented 5.6 and 2.0% of prevalence, respectively. Among the mammograms of women with diabetes, the odds ratio of mammary artery calcifications was 2.1 (95%CI 1.0-4.1), with p-value of 0.02. On the other hand, the mammograms of smokers showed the low occurrence of breast arterial calcification, with an odds ratio of 0.3 (95%CI 0.1-0.8). Hypertension, obesity, diabetes mellitus, stroke and acute coronary syndrome were not significantly associated with breast arterial calcification., Conclusion: The occurrence of breast arterial calcification was associated with diabetes mellitus and was negatively associated with smoking. The presence of calcification was independent of the other risk factors for cardiovascular disease analyzed.

The use of lignocellulosic raw materials in bioethanol production has been intensively investigated in recent years. However, for efficient conversion to ethanol, many pretreatment steps are required prior to hydrolysis and fermentation. Coffee stands out as the most important agricultural product in Brazil and wastes such as pulp and coffee husk are generated during the wet and dry processing to obtain green grains, respectively. This work focused on the optimization of alkaline pretreatment of coffee pulp with the aim of making its use in the alcoholic fermentation. A central composite rotatable design was used with three independent variables: sodium hydroxide and calcium hydroxide concentrations and alkaline pretreatment time, totaling 17 experiments. After alkaline pretreatment the concentration of cellulose, hemicellulose, and lignin remaining in the material, the subsequent hydrolysis of the cellulose component and its fermentation of substrate were evaluated. The results indicated that pretreatment using 4% (w/v) sodium hydroxide solution, with no calcium hydroxide, and 25 min treatment time gave the best results (69.18% cellulose remaining, 44.15% hemicelluloses remaining, 25.19% lignin remaining, 38.13 g/L of reducing sugars, and 27.02 g/L of glucose) and produced 13.66 g/L of ethanol with a yield of 0.4 g ethanol/g glucose., (© 2013 American Institute of Chemical Engineers.)

Coffee is one of the most important agricultural products in Brazil. More than 50 % of the coffee fruit is not used for the production of commercial green coffee and is therefore discarded, usually ending up in the environment. The goal of this work was to select an efficient process for obtaining coffee pulp extract and to evaluate the use of this extract in bioethanol production. The effects of heat treatment and trituration on the yield and composition of the extract were investigated by measuring the amounts of reducing sugars, starch, pectin, and phenolic compounds. The extraction process was most efficient at room temperature using grinding followed by pressing. Five different fermentation media were tested: sugarcane juice or molasses diluted with water or with coffee pulp extract and a medium with only coffee pulp extract. Batch fermentations were carried out at 30 °C for 24 h, and samples were taken to obtain measurements of the total reducing sugars, cell count, and ethanol concentration. The addition of coffee pulp extract did not influence the fermentation or yeast viability, and it can thus be mixed with sugarcane juice or molasses for the production of bioethanol, with a yield of approximately 70 g/L.

Objective: To evaluate the intraobserver and interobserver reproducibility of Hawkins' classification for fractures of the neck of the talus., Methods: 20 random cases of fracture of the talus were selected, to be defined according to the classification of types by eight orthopedic surgeons, 13 orthopedic residents and 15 radiology residents., Results: Using the statistical test of Landis and Koch, measurements of 0.627 and 0.668 were obtained in the first and second evaluations, respectively. These values define a satisfactory agreement for Hawkins' classification., Conclusion: We conclude that this classification is reproducible between observers, with better values for the more experienced observers. Level of Evidence I, Study Diagnostic - Investigating a diagnostic test.

Objective: To study the shoulder of this group of patients using magnetic resonance imaging to detect clinical and subclinical disorders and establish a rehabilitation program., Methods: Nine patients with spinal cord injury followed in the Laboratory of Biomechanics and Rehabilitation of the Locomotive System at HC/UNICAMP were divided into two groups according to the presence of paraplegia and tetraplegia and were clinically assessed for correlation with the imaging exams., Results: Normal results were found in 41% of the shoulders. Most common injuries were tendinopathy of the supraspinatus and acromioclavicular joint degeneration. Eighty percent of injured shoulders had combined lesions., Conclusion: A great variety of causes of shoulder pain was identified in paraplegic and tetraplegic subjects. Routine clinical assessment and imaging studies of the shoulder may contribute to the evolution of rehabilitation and reduction of pain and musculoskeletal disorders. Level of Evidence II, Development of Diagnostic Criteria on Consecutive Patients, With Universally Applied Reference "Gold" Standard.