Search

Surface lattice reconstruction is commonly observed in nickel-rich layered oxide battery cathode materials, causing unsatisfactory high-voltage cycling performance. However, the interplay of the surface chemistry and the bulk microstructure remains largely unexplored due to the intrinsic structural complexity and the lack of integrated diagnostic tools for a thorough investigation at complementary length scales. Herein, by combining nano-resolution X-ray probes in both soft and hard X-ray regimes, we demonstrate correlative surface chemical mapping and bulk microstructure imaging over a single charged LiNi0.8Mn0.1Co0.1O2 (NMC811) secondary particle. We reveal that the sub-particle regions with more micro cracks are associated with more severe surface degradation. A mechanism of mutual modulation between the surface chemistry and the bulk microstructure is formulated based on our experimental observations and finite element modeling. Such a surface-to-bulk reaction coupling effect is fundamentally important for the design of the next generation battery cathode materials.

Li- and Mn-rich (LMR) layered cathode materials have demonstrated impressive capacity and specific energy density thanks to their intertwined redox centers including transition metal cations and oxygen anions. Although tremendous efforts have been devoted to the investigation of the electrochemically driven redox evolution in LMR cathode at ambient temperature, their behavior under a mildly elevated temperature (up to ∼100 °C), with or without electrochemical driving force, remains largely unexplored. Here we show a systematic study of the thermally driven surface-to-bulk redox coupling effect in charged Li1.2Ni0.15Co0.1Mn0.55O2. We for the first time observed a charge transfer between the bulk oxygen anions and the surface transition metal cations under ∼100 °C, which is attributed to the thermally driven redistribution of Li ions. This finding highlights the nonequilibrium state and dynamic nature of the LMR material at deeply delithiated state upon a mild temperature perturbation.

While Li ion batteries are intended to be operated within a mild temperature window, their structural and chemical complexity could lead to unanticipated local electrochemical events that could cause extreme temperature spikes, which, in turn, could trigger more undesired and sophisticated reactions in the system. Visualizing and understanding the response of battery electrode materials to thermal abuse conditions could potentially offer a knowledge basis for the prevention and mitigation of the safety hazards. Here we show a comprehensive investigation of thermally driven chemomechanical interplay in a Li0.5Ni0.6Mn0.2Co0.2O2 (charged NMC622) cathode material. We report that, at the early stage of the thermal abuse, oxygen release and internal Li migration occur concurrently, and are accompanied by mechanical disintegration at the mesoscale. At the later stage, Li protrusions are observed on the secondary particle surface due to the limited lithium solubility in non-layered lattices. The extraction of both oxygen and lithium from the host material at elevated temperature could influence the chemistry and safety at the cell level via rearrangement of the electron and ion diffusion pathways, reduction of the coulombic efficiency, and/or causing an internal short circuit that could provoke a thermal runaway.

Novel developments in X-ray sources, optics and detectors have significantly advanced the capability of X-ray microscopy at the nanoscale. Depending on the imaging modality and the photon energy, state-of-the-art X-ray microscopes are routinely operated at a spatial resolution of tens of nanometres for hard X-rays or ∼10 nm for soft X-rays. The improvement in spatial resolution, however, has led to challenges in the tomographic reconstruction due to the fact that the imperfections of the mechanical system become clearly detectable in the projection images. Without proper registration of the projection images, a severe point spread function will be introduced into the tomographic reconstructions, causing the reduction of the three-dimensional (3D) spatial resolution as well as the enhancement of image artifacts. Here the development of a method that iteratively performs registration of the experimentally measured projection images to those that are numerically calculated by reprojecting the 3D matrix in the corresponding viewing angles is shown. Multiple algorithms are implemented to conduct the registration, which corrects the translational and/or the rotational errors. A sequence that offers a superior performance is presented and discussed. Going beyond the visual assessment of the reconstruction results, the morphological quantification of a battery electrode particle that has gone through substantial cycling is investigated. The results show that the presented method has led to a better quality tomographic reconstruction, which, subsequently, promotes the fidelity in the quantification of the sample morphology.

Redox phase transformations are relevant to a number of metrics pertaining to the electrochemical performance of batteries. These phase transformations deviate from and are more complicated than the conventional theory of phase nucleation and propagation, owing to simultaneous changes of cationic and anionic valence states as well as the polycrystalline nature of battery materials. Herein, we propose an integrative approach of mapping valence states and constructing chemical topographies to investigate the redox phase transformation in polycrystalline layered oxide cathode materials under thermal abuse conditions. We discover that, in addition to the three-dimensional heterogeneous phase transformation, there is a mesoscale evolution of local valence curvatures in valence state topographies. The relative probability of negative and positive local valence curvatures alternates during the layered-to-spinel/rocksalt phase transformation. The implementation of our method can potentially provide a universal approach to study phase transformation behaviors in battery materials and beyond.

While Li ion batteries are intended to be operated within a mild temperature window, their structural and chemical complexity could lead to unanticipated local electrochemical events that could cause extreme temperature spikes, which, in turn, could trigger more undesired and sophisticated reactions in the system. Visualizing and understanding the response of battery electrode materials to thermal abuse conditions could potentially offer a knowledge basis for the prevention and mitigation of the safety hazards. Here we show a comprehensive investigation of thermally driven chemomechanical interplay in a Li0.5Ni0.6Mn0.2Co0.2O2 (charged NMC622) cathode material. We report that, at the early stage of the thermal abuse, oxygen release and internal Li migration occur concurrently, and are accompanied by mechanical disintegration at the mesoscale. At the later stage, Li protrusions are observed on the secondary particle surface due to the limited lithium solubility in non-layered lattices. The extraction of both oxygen and lithium from the host material at elevated temperature could influence the chemistry and safety at the cell level via rearrangement of the electron and ion diffusion pathways, reduction of the coulombic efficiency, and/or causing an internal short circuit that could provoke a thermal runaway.

This study investigates bony protrusions within a narrowed periodontal ligament space (PDL-space) of a human bone-PDL-tooth fibrous joint by mapping structural, biochemical, and mechanical heterogeneity. Higher resolution structural characterization was achieved via complementary atomic force microscopy (AFM), nano-transmission X-ray microscopy (nano-TXM), and microtomography (MicroXCT™). Structural heterogeneity was correlated to biochemical and elemental composition, illustrated via histochemistry and microprobe X-ray fluorescence analysis (μ-XRF), and mechanical heterogeneity evaluated by AFM-based nanoindentation. Results demonstrated that the narrowed PDL-space was due to invasion of bundle bone (BB) into PDL-space. Protruded BB had a wider range with higher elastic modulus values (2-8GPa) compared to lamellar bone (0.8-6GPa), and increased quantities of Ca, P and Zn as revealed by μ-XRF. Interestingly, the hygroscopic 10-30μm interface between protruded BB and lamellar bone exhibited higher X-ray attenuation similar to cement lines and lamellae within bone. Localization of the small leucine rich proteoglycan biglycan (BGN) responsible for mineralization was observed at the PDL-bone interface and around the osteocyte lacunae. Based on these results, it can be argued that the LB-BB interface was the original site of PDL attachment, and that the genesis of protruded BB identified as protrusions occurred as a result of shift in strain. We emphasize the importance of bony protrusions within the context of organ function and that additional study is warranted.

This study investigates bony protrusions within a narrowed periodontal ligament space (PDL-space) of a human bone-PDL-tooth fibrous joint by mapping structural, biochemical, and mechanical heterogeneity. Higher resolution structural characterization was achieved via complementary atomic force microscopy (AFM), nano-transmission X-ray microscopy (nano-TXM), and microtomography (MicroXCT™). Structural heterogeneity was correlated to biochemical and elemental composition, illustrated via histochemistry and microprobe X-ray fluorescence analysis (μ-XRF), and mechanical heterogeneity evaluated by AFM-based nanoindentation. Results demonstrated that the narrowed PDL-space was due to invasion of bundle bone (BB) into PDL-space. Protruded BB had a wider range with higher elastic modulus values (2-8GPa) compared to lamellar bone (0.8-6GPa), and increased quantities of Ca, P and Zn as revealed by μ-XRF. Interestingly, the hygroscopic 10-30μm interface between protruded BB and lamellar bone exhibited higher X-ray attenuation similar to cement lines and lamellae within bone. Localization of the small leucine rich proteoglycan biglycan (BGN) responsible for mineralization was observed at the PDL-bone interface and around the osteocyte lacunae. Based on these results, it can be argued that the LB-BB interface was the original site of PDL attachment, and that the genesis of protruded BB identified as protrusions occurred as a result of shift in strain. We emphasize the importance of bony protrusions within the context of organ function and that additional study is warranted.

Until the 19th century, most pigments were based on naturally occurring colored minerals and dyes, with three significant exceptions: Egyptian Blue, Chinese Blue/Purple and Maya Blue. The former two are alkaline-earth copper silicates, and because of this similarity it has been proposed that the Chinese pigments were derived from Egyptian Blue. Herein, we analyzed clumps of pigment from the Qin warriors and discovered that in spite of the structural similarity to Egyptian Blue, the micro-structural morphology of Chinese Purple is very different. Therefore, we believe that the synthesis technology for the Chinese pigments was a by-product of high-refractive index glasses (artificial jades) produced by Taoist monks. Further, the disappearance of these pigments from Chinese art and monuments concurrently with the decline of Taoism not only substantiates the link between the two, but also gives a striking example of how cultural changes in the society affected the scientific developments in ancient China.

One doublet is usually employed to fit the Si0 substrate species in the Si 2p photoemission spectra from Si (001) H-terminated (after piranha treatment) and oxidized surfaces. However, there is a second substrate-top component (ST) with a binding energy of 0.3 eV higher than the bulk component; its intensity varies from ∼10% at normal emission (i.e., 90° from the surface) to ∼20% at 35°. It is present even for oxidized surfaces and does not correspond to any of the suboxide species. It corresponds to the first layers of the substrate and is responsible for the decrease in the signal dip between the two S–O branches of the Si 2p spectra for glancing electron takeoff angles. Although it is resolvable for monochromatized sources, the ST component is absent in the literature on Si 2p spectra. [ABSTRACT FROM AUTHOR]

The effects of the deposition of ultrathin HfO(sub 2) films on p-type Si(100) wafers by an atomic layer controlled by a deposition scheme. Short range order in the as-deposited films was determined to be monoclinic by the extended x-ray absorption fine structure (EXAFS) measurements.

A new study uses total reflection x-ray fluorescence spectroscopy to investigate the aluminum impurities in silicon wafer surfaces.

Charged particle-induced conductivity and time-resolved transient photoinduced conductivity are complementary techniques used to measure the electrical characteristics associated with radiation detection on single-crystal natural type-IIa diamond. The product of the carrier mobility and lifetime are measured by the charged particle-induced conductivity technique throughout the bulk of the material. The carrier mobility and lifetime are measured independently by the transient productivity technique at the few micrometers of the material surface. The integration of the respective signals enabled the determination of the product of the carrier mobility and the lifetime for each technique.

A method for the characterization of chemical vapor deposition growth and the potential electrical properties of diamond is discussed. This involves the utilization of transient photoconductivity as a function of excitation density and temperature on the combined electron and hole mobility of a single-crystal type IIa natural diammond and a polycrystalline diamond. The utility of the technique was demonstrated for both diamond types.