Search

Charge carrier mobility is at the core of semiconductor materials and devices optimization, and Hall measurement is one of the most important techniques for its characterization. The Hall factor, defined as the ratio between Hall and drift mobilities, is of particular importance. Here we study the effect of anisotropy by computing the drift and Hall mobility tensors of a technologically important wide-band-gap semiconductor, 4H-silicon carbide (4H-SiC) from first principles. With $GW$ electronic structure and \textit{ab initio} electron-phonon interactions, we solve the Boltzmann transport equation without fitting parameters. The calculated electron and hole mobilities agree with experimental data. The electron Hall factor strongly depends on the direction of external magnetic field $\mathbf{B}$, and the hole Hall factor exhibits different temperature dependency for $\mathbf{B}\parallel c$ and $\mathbf{B}\perp c$. We explain this by the different equienergy surface shape arising from the anisotropic and non-parabolic band structure, together with the energy-dependent electron-phonon scattering., Comment: 24 pages, 8 figures

Two-dimensional (2D) Transition Metal Chalcogenides (TMCs) have attracted tremendous interest from both the scientific and technological communities due to their variety of properties and superior tunability through layer number, composition, and interface engineering. Wafer-scale production of 2D TMCs is critical to the industrial applications of these materials. Extensive efforts have been bestowed to the large-area growth of 2D TMCs through various approaches. In this review, recent advances in obtaining large-area 2D TMCs by different methods such as chemical vapor deposition (CVD), metal-organic CVD, physical vapor deposition are firstly highlighted and their advantages and disadvantages are also evaluated. Then strategies for the control of the grains, morphology, layer number and phase to achieve controllable and uniform thicknesses and large crystal domains for 2D TMCs are discussed. Applications of large-area 2D TMCs in electronics, optoelectronics, spintronics etc. are also introduced. Finally, ideas and prospects for the future developments of wafer-scale 2D TMCs are provided.

Recent progress in the synthesis and assembly of two-dimensional (2D) materials has laid the foundation for various applications of atomically thin layer films. These 2D materials possess rich and diverse properties such as layer-dependent band gaps, interesting spin degrees of freedom, and variable crystal structures. They exhibit broad application prospects in micro-nano devices. In the meantime, the wide bandgap semiconductors (WBS) with an elevated breakdown voltage, high mobility, and high thermal conductivity have shown important applications in high-frequency microwave devices, high-temperature and high-power electronic devices. Beyond the study on single 2D materials or WBS materials, the multi-functional 2D/WBS heterostructures can promote the carrier transport at the interface, potentially providing novel physical phenomena and applications, and improving the performance of electronic and optoelectronic devices. In this review, we overview the advantages of the heterostructures of 2D materials and WBS materials, and introduce the construction methods of 2D/WBS heterostructures. Then, we present the diversity and recent progress in the applications of 2D/WBS heterostructures, including photodetectors, photocatalysis, sensors, and energy related devices. Finally, we put forward the current challenges of 2D/WBS heterostructures and propose the promising research directions in the future.

Basal-plane dislocations (BPDs) pose a great challenge to the reliability of bipolar power devices based on the 4H silicon carbide (4H-SiC). It is well established that heavy nitrogen (N) doping promotes the conversion of BPDs to threading edge dislocations (TEDs) and improves the reliability of 4H-SiC-based bipolar power devices. However, the interaction between N and BPDs, and the effect of N on the electronic properties of BPDs are still ambiguous, which significantly hinder the understanding on the electron-transport mechanism of 4H-SiC-based bipolar power devices. Combining molten-alkali etching and the Kelvin probe force microscopy (KPFM) analysis, we demonstrate that BPDs create acceptor-like states in undoped 4H-SiC, while acting as donors in N-doped 4H-SiC. First-principles calculations verify that BPDs create occupied defect states above the valence band maximum (VBM) and unoccupied defect states under the conduction-band minimum (CBM) of undoped 4H-SiC. The electron transfer from the defect states of intrinsic defects and native impurities to the unoccupied defect states of BPDs gives rise to the acceptor-like behavior of BPDs in undoped 4H-SiC. Defect formation energies indicate that N atoms can spontaneously decorate BPDs during the N doping of 4H-SiC. The binding between N and BPD is strong against decomposition. The accumulation of N dopants at the core of BPDs results in the accumulation of donor-like states at the core of BPDs in N-doped 4H-SiC. This work not only enriches the understanding on the electronic behavior of BPDs in N-doped 4H-SiC, but also helps understand the electron transport mechanism of 4H-SiC-based bipolar power devices., Comment: 20 pages, 5 figures

The p-type doping efficiency of 4H silicon carbide (4H-SiC) is rather low due to the large ionization energies of p-type dopants. Such an issue impedes the exploration of the full advantage of 4H-SiC for semiconductor devices. In this letter, we show that co-doping group-IVB elements effectively decreases the ionization energy of the most widely used p-type dopant, i. e., aluminum (Al), through the Coulomb repulsion between the energy levels of group-IVB elements and that of Al in 4H-SiC. Among group-IVB elements Ti has the most prominent effectiveness. Ti decreases the ionization energy of Al by nearly 50%, leading to a value as low as ~ 0.13 eV. As a result, the ionization rate of Al with Ti co-doping is up to ~ 5 times larger than that without co-doping at room temperature when the doping concentration is up to 1018 cm-3. This work may encourage the experimental co-doping of group-IB elements such as Ti and Al to significantly improve the p-type doping efficiency of 4H-SiC.

We demonstrate the fabrication of a single electron transistor device based on a single ultra-small silicon quantum dot connected to a gold break junction with a nanometer scale separation. The gold break junction is created through a controllable electromigration process and the individual silicon quantum dot in the junction is determined to be a Si_170 cluster. Differential conductance as a function of the bias and gate voltage clearly shows the Coulomb diamond which confirms that the transport is dominated by a single silicon quantum dot. It is found that the charging energy can be as large as 300meV, which is a result of the large capacitance of a small silicon quantum dot (1.8 nm). This large Coulomb interaction can potentially enable a single electron transistor to work at room temperature. The level spacing of the excited state can be as large as 10 meV, which enables us to manipulate individual spin via an external magnetic field. The resulting Zeeman splitting is measured and the lande factor of 2.3 is obtained, suggesting relatively weak electron-electron interaction in the silicon quantum dot which is beneficial for spin coherence time.

Interlayer interactions perturb the electronic structure of two-dimensional materials and lead to new physical phenomena, such as van Hove singularities and Hofstadter's butterfly pattern. Silicene, the recently discovered two-dimensional form of silicon, is quite unique, in that silicon atoms adopt competing sp2 and sp3 hybridization states leading to a low-buckled structure promising relatively strong interlayer interaction. In multilayer silicene, the stacking order provides an important yet rarely explored degree of freedom for tuning its electronic structures through manipulating interlayer coupling. Here, we report the emergence of van Hove singularities in the multilayer silicene created by an interlayer rotation. We demonstrate that even a large-angle rotation (> 20o) between stacked silicene layers can generate a Moire pattern and van Hove singularities due to the strong interlayer coupling in multilayer silicene. Our study suggests an intriguing method for expanding the tunability of the electronic structure for electronic applications in this two-dimensional material., Comment: 8 pages, 4 figures

Silicene is a two-dimensional material, which is composed of a single layer of silicon atoms with sp2-sp3 mixed hybridization. The sp2-sp3 mixed hybridization renders silicene excellent reactive ability, facilitating the chemical modification of silicene. It has been demonstrated that chemical modification effectively enables the tuning of the properties of silicene. We now review all kind of chemical modification methods for silicene including hydrogenation, halogenation, organic surface modification, oxidation, doping and alloying. The effects of these chemical modification methods on the geometrical, electronic, optical and magnetic properties of silicene are discussed. The potential applications of chemically modified silicene in a variety of fields such as electronics, optoelectronics and magnetoelectronics are introduced. We finally envision future work on the chemical modification of silicene for the sake of further advancing the development of silicene.

Silicene monolayers grown on Ag(111) surfaces demonstrate a band gap that is tunable by oxygen adatoms from semimetallic to semiconducting type. By using low-temperature scanning tunneling microscopy, it is found that the adsorption configurations and amounts of oxygen adatoms on the silicene surface are critical for band-gap engineering, which is dominated by different buckled structures in R13xR13, 4x4, and 2R3x2R3 silicene layers. The Si-O-Si bonds are the most energy-favored species formed on R13xR13, 4x4, and 2R3x2R3 structures under oxidation, which is verified by in-situ Raman spectroscopy as well as first-principles calculations. The silicene monolayers retain their structures when fully covered by oxygen adatoms. Our work demonstrates the feasibility of tuning the band gap of silicene with oxygen adatoms, which, in turn, expands the base of available two-dimensional electronic materials for devices with properties that is hardly achieved with graphene oxide., Comment: Accepted by ACS Nano