Search

Pork belly quality indicators are economically relevant in the pork industry. Near-infrared (NIR) spectroscopy of the pork shoulder outer subcutaneous fat layer, belly flop angle, and subjective softness scores of the pork belly were measured (N = 144) to determine the accuracy of pork shoulder NIR spectroscopy as a predictor of pork belly softness. The NIR spectra hot carcass estimates explained over 80.0% variability in pork belly softness (80.5%–90.8%), with low prediction error, suggesting that NIR spectroscopy measured in the pork shoulder is an efficient and accurate indicator of pork belly softness to classify pork bellies for specific market demands.

The seed coat is a major byproduct of lentil processing with potential as a sustainable source of antioxidant polyphenols. Profiles of water-soluble phenolic compounds and antioxidant activities of seven genotypes of lentil which includes both normal-tannin and low-tannin seed coats were investigated. Antioxidant activities were assessed using four antioxidant assays, and phenolic compounds were quantified using liquid chromatography mass spectrometry (LC-MS). Total phenolic content (TPC) varied significantly among genotypes and ranged between 1519 ± 140 and 6502 ± 154 μg/g. Thirty phenolic compounds were identified with kaempferol tetraglycoside, catechin-3-glucoside and procyanidins being the dominant compounds in normal-tannin seed coats. Kaempferol tetraglycoside predominated (80-90%) in low-tannin seed coats. Antioxidant activities strongly correlated with TPC (r 0.93) with a 6-9 times higher activity in normal-tannin than that of low-tannin lentils. Without flavan-3-ols and procyanidins, low-tannin seed coat may not exert strong antioxidant potential, whereas normal-tannin seed coat contains water-extractable natural phenolic compounds with promising antioxidant potential.

This study explored effects of different cooking methods, pork fat addition and food additives on physicochemical and nutritional attributes of beef meatballs fortified, or not, with 3% sugarcane fibre. TPA hardness of meatballs with fibre, cooked in boiling water, was lower compared to oven-baked and pan-fried (47.11, 56.24 and 59.22 N, respectively). Hardness also decreased with increasing fat content (5%, 10%, 15% and 20% fat; 62.07, 56.96, 54.02 and 45.51 N, respectively). Tetrasodium pyrophosphate and sodium tripolyphosphate provided similar results for all parameters except ash content where cooked meatballs with the latter were higher (1.98% and 2.22%, respectively). Cooking loss of 20% fat meatballs with fibre was lower (17.14%) compared to without fibre (20.28%). Loss of nutrients after cooking was lower for oven-baked compared to boiling. Using different ingredients to manipulate quality traits of meatballs is an alternative to manufacture suitable products for different market requirements, for example for elderly consumers.

The organoleptic quality of pulses and their derived ingredients is fundamental in human utilization and evolution of food. However, the widespread use of pulses is hindered by their inherent sensorial aspects, which are regarded as atypical by the consumers who are unfamiliar to them. In most studies involving sensory assessment of pulses and pulse-ingredients using classical descriptive analysis methods, assessors establish their own lexica. This review is a synthesis of descriptive terms by which sensations emanating from pea, chickpea, lentil, faba bean, dry bean, bambara groundnut, lupin, pigeon pea and cowpea, and their derived ingredients have been described in the literature. Studies involving sensory assessment of processed whole seeds, slurries of raw flour, slurries of protein extracted from raw flour, and food products containing components of pulses were considered. The terms are categorized into those denoting basic taste, aroma, flavor, and trigeminal sensations. Bitterness is the most widely perceived basic taste. Beany, which is broad and complex with subcharacter notes, is predominantly used to describe aroma and flavor. The frequency of use of the collated terms in the reviewed studies was used to establish a sensory wheel. Inconsistency in the use of descriptive terms in the literature necessitates establishment of a standard lexicon that can be applied in both classical and increasingly popular rapid descriptive methods (e.g., check-all-that-apply) throughout the pulse value chain. This review is timely considering the dominance of pulses in plant-based foods and their increasing appeal to the food industry.

Sensorial perceptions change as people age; hence the aim of this study was to test if there were differences between younger (n = 95; aged 20-56) compared to older (n = 97; aged 60-81) consumers in sensory assessment of beef patties with varying firmness ('soft', 'medium', 'hard') and the influence of adding plum sauce as a lubricant and flavouring. The firmness of patties influenced consumer scores for overall liking, appearance, texture, flavour, and saltiness for both age groups. Both groups preferred the 'soft' patty regardless of sauce addition. When sauce was added, there was an increase in appearance and texture liking for younger consumers, but it did not influence liking for older people. In contrast to older consumers, younger subjects noted a 'sour-acidic' taste in samples. Sensorial perception of flavour does change as people age, and this is important to consider when developing suitable foods for older adults' consumption.

Several muscles from mature beef carcasses have been identified as failing to provide adequate tenderness required for a satisfactory consumer eating experience. Postmortem processing strategies can help improve the tenderness and subsequent eating quality of mature beef muscles. The current study was undertaken to investigate the impact of processing strategies (blade tenderization [BT], pretumbling [PT], and moisture enhancement [ME]), alone and in combination, on processing yield and eating quality-related parameters of selected loin and hip muscles (gluteus medius [GM], longissimus lumborum [LL], semimembranosus [SM], and biceps femoris [BF]) from youthful and mature beef cattle. Results indicate that muscles from mature beef were inherently less tender (P < 0.05), but some tenderization procedures produced meat that was similar in tenderness to that of youthful cattle. Of the different tenderization strategies evaluated, BT followed by ME (injection of a salt/phosphate solution) was the most effective strategy for improving (P < 0.05) tenderness of tougher muscle cuts such as BF and SM. Moisture enhancement alone improved tenderness (P < 0.05) and juiciness (P < 0.01) of SM, GM and LL, but with the exception of samples tenderized prior to injection, was not effective (P > 0.05) in BF muscles. No additional tenderization of GM and LL samples was observed (P > 0.05) by combining PT or BT with ME. Combining PT or BT with ME; however, was effective (P < 0.05) to control the increased purge loss observed following ME treatment in SM and LL muscles. Pretumbling as a single treatment was ineffective (P > 0.05) in all of the muscles, and only treatments that included BT were sufficient to effect an increase (P < 0.05) in tenderness of BF.

In contrast to other pulses, chickpea has a relatively high fat content (3%–10%). This study was designed to investigate direct‐expanded chickpea–sorghum extruded snacks (50:50, 60:40, and 70:30 chickpea:sorghum, w/w) with respect to: their oxidative stability and sensory properties during accelerated (55°C) and room temperature (25°C) storage; correlations between chemical markers (peroxide value and p‐anisidine value) and sensory data during accelerated storage; and the shelf‐life of snacks extruded at the optimal expansion point as determined by a rotatable central composite design. Peroxide values and p‐anisidine values were in the range of 0–2.5 mEq/Kg and 5–30, respectively, for both accelerated and room temperature storage, and increased during storage (p, The study investigated direct‐expanded chickpea–sorghum snacks (50:50, 60:40, and 70:30 chickpea:sorghum, w/w) with respect to oxidative stability during accelerated (55°C) and room temperature (25°C) storage as chickpea contains 3%–10% fat content on a dry weight basis. Both chemical and sensory analyses indicated that oxidative stability decreased as the percentage of chickpea in the blend increased. Therefore, in terms of shelf‐life, a 50:50 chickpea–sorghum blend is preferable.

Panelists in Saskatoon, Canada (n= 45) and Dhaka, Bangladesh (n= 98) participated in sensory evaluations of the sensory properties of both cooked and uncooked dehulled red lentil dal fortified with FeSO4·7H2O, NaFeEDTA or FeSO4·H2O at fortificant Fe concentrations of 800, 1,600 (both cooked and uncooked), or 2,800 ppm. Appearance, odor, and overall acceptability of cooked and uncooked samples were rated using a 9‐point hedonic scale (1 = dislike extremely to 9 = like extremely). Taste and texture were rated for the cooked samples prepared as typical south Asian lentil meals. Significant differences in sensory quality were observed among all uncooked and cooked samples at both locations. Overall, scores for all sensory attributes and acceptability of uncooked lentil decreased with increasing concentration of Fe in the fortificant; however, Fe fortification (particularly with NaFeEDTA) had small effects on acceptability. Panelists from Saskatoon provided a wider range of scores than those from Bangladesh for all attributes of cooked lentil. Overall, sensory evaluation of Fe fortification using NaFeEDTA minimally affected consumer perception of color, taste, texture, odor, and overall acceptability of cooked lentil. Reliability estimates (Cronbach's alpha [CA]) indicated that consumer scores were generally consistent for all attributes of all lentil samples (mean CA > 0.80). NaFeEDTA was found to be the most suitable Fe fortificant for lentil based on consumer acceptability. Consumption of 45 to 50 g of NaFeEDTA‐fortified lentil (fortificant Fe concentration of 1,600 ppm) per day meets the estimated average requirements (EARs) of Fe for humans (10.8 to 29.4 mg). Iron fortification of dehulled lentil dal may change organoleptic attributes that can influence consumer acceptability. Sensory evaluation by consumers helps to determine the effect on appearance, odor, taste, texture, and overall acceptability of fortified lentils. In this study, consumer acceptability was evaluated with panelists who consume lentil regularly. Panelists provided significantly different scores for 5 sensory attributes for 10 uncooked and 3 cooked lentil samples. Panelists reliably preferred NaFeEDTA as the most suitable Fe fortificant for dehulled lentils for 5 attributes. Overall, lentil dal fortified with NaFeEDTA can offer a simple and low‐cost solution to human health problems associated with iron‐related malnutrition.

Pork bellies (n = 198) were scanned with dual energy X-ray absorptiometry (DXA). Visible and near-infrared reflectance (Vis-NIR) spectra were collected from the lean (latissimus dorsi), subcutaneous fat and intermuscular fat layers. Belly-flop angle and subjective belly scores were collected as measures of pork belly softness. Vis-NIR spectra from a single fat layer could explain between 72.7 and 81.1% of the variation in pork belly softness (43.6–72.4% in validation set). The combination of the lean and subcutaneous layers improved the calibration model fit to 79.7–99.9% (66.3–71.5% in validation set). The DXA estimates explained 62.3% of variation in pork belly softness (65.2% in validation set). Results indicated that DXA and NIR technologies could potentially be utilized for pork belly softness sorting in the pork industry.

Panelists in Saskatoon, Canada (n = 45) and Dhaka, Bangladesh (n = 98) participated in sensory evaluations of the sensory properties of both cooked and uncooked dehulled red lentil dal fortified with FeSOIron fortification of dehulled lentil dal may change organoleptic attributes that can influence consumer acceptability. Sensory evaluation by consumers helps to determine the effect on appearance, odor, taste, texture, and overall acceptability of fortified lentils. In this study, consumer acceptability was evaluated with panelists who consume lentil regularly. Panelists provided significantly different scores for 5 sensory attributes for 10 uncooked and 3 cooked lentil samples. Panelists reliably preferred NaFeEDTA as the most suitable Fe fortificant for dehulled lentils for 5 attributes. Overall, lentil dal fortified with NaFeEDTA can offer a simple and low-cost solution to human health problems associated with iron-related malnutrition.

This study aimed to examine the influence of cooking methods and pre-determined refrigerated storage days on the production of lipid oxidation (TBARS), protein oxidation (PROTOX) and heterocyclic aromatic amines (HAA) in bacon. Forty-four pork bellies selected from pigs varying in breed, sex and diets to introduce variability in composition were processed as bacon. Sliced-bacon was stored at 4°C either for 2 or 28days and these storage groups were cooked either with microwave or frying pan. Microwave led to significantly higher PROTOX (P0.001), while frying pan led to higher levels of HAA and TBARS in bacon (P0.001). Frying pan cooking increased the saltiness and crispiness of bacon (P0.05) whereas other sensory attributes were not affected (P0.05) by the cooking methods and storage times. Similarly, the fatty acid composition of pork belly did not significantly influence the production of HAA, TBARS and PROTOX produced in bacon during cooking. Overall, microwave cooking had lesser impact on the production of carcinogenic compounds in bacon with only minor impact on sensory attributes.

We explored various dimensional and compositional factors that can influence the perception of pork belly firmness. Bellies from 198 pigs of three different genotypes, two sexes, two slaughter weights and three different diets were recovered and belly firmness was assessed using the belly-flop angle and a 5-point scale subjective measurement. Dimensional and compositional factors were recorded on intact and sheet-ribbed bellies. Subjective belly score was negatively correlated with belly-flop angle (r = − 0.89). Regression analysis accounted for 77 and 83% of the variability in subjective belly firmness and belly-flop angle measurement, respectively. Belly length, weight and width influenced both measures of belly firmness, but these effects were more important for the belly-flop angle. After correcting flop angle using belly length, the effect of belly weight disappeared and the effect of other traits was more like those observed for subjective scoring. Hence, undue effect of belly length should be corrected for if this set-up is to be implemented in commercial plants.

The accuracy of dual energy X-ray absorptiometry (DXA) in assessing carcass composition from pigs with diverse characteristics was examined in the present study. A total of 648 pigs from three different sire breeds, two sexes, two slaughter weights and three different diets were employed. DXA estimations were used to predict the dissected/chemical yield for lean and fat of carcass sides and primal cuts. The accuracy of the predictions was assessed based on coefficient of determination (R(2)) and residual standard deviation (RSD). The linear relationships for dissected fat and lean for all the primal cuts and carcass sides were high (R(2)0.94, P0.01), with low RSD (1.9%). Relationships between DXA and chemical fat and lean of pork bellies were also high (R(2)0.94, P0.01), with RSD2.9%. These linear relationships remained high over the full range of variation in the pig population, except for sire breed, where the coefficient of determination decreased when carcasses were classified based on this variable.

Summary Flaxseed (Linum usitatissimum L.) protein is reported to release physiologically important amino acids and bioactive peptides during gastrointestinal (GI) digestion. The effect of seed mucilage and oil and thermal processing on the in vitro protein digestibility (IPD) of flaxseed protein was assessed under simulated GI digestion. Protein in ground whole flaxseed that contained both mucilage and oil had the lowest digestibility (12.61%). Baking and boiling before size reduction significantly (P

BACKGROUND: Chickpea (Cicer arietinum L.) seeds are a good source of protein that has potential applications in new product formulation and fortification. The main objectives of this study were to analyse the physicochemical, thermal and functional properties of chickpea protein isolates (CPIs) and compare them with those of soy (SPI) and pea (PPI) protein isolates. RESULTS: Extracted CPIs had mean protein contents of 728–853 g kg−1 (dry weight basis). Analysis of their deconvoluted Fourier transform infrared spectra gave secondary structure estimates of 25.6–32.7% α-helices, 32.5–40.4% β-sheets, 13.8–18.9% turns and 16.3–19.2% disordered structures. CPIs from CDC Xena, among Kabuli varieties, and Myles, among Desi varieties, as well as SPI had the highest water-holding and oil absorption capacities. The emulsifying properties of Kabuli CPIs were superior to those of PPI and Desi CPIs and as good as those of SPI. The heat-induced gelation properties of CPIs showed a minimum protein concentration required to form a gel structure ranging from 100 to 140 g L−1. Denaturation temperatures and enthalpies of CPIs ranged from 89.0 to 92.0 °C and from 2.4 to 4.0 J g−1 respectively. CONCLUSION: The results suggest that most physicochemical, thermal and functional properties of CPIs compare favourably with those of SPI and are better than those of PPI. Hence CPI may be suitable as a high-quality substitute for SPI in food applications. Copyright © 2011 Society of Chemical Industry

This study investigated the effect of microclimate temperature during preslaughter transportation on chicken meat quality. Ninety broilers per load of 2,900 were monitored individually during 3 to 4 h of preslaughter transport in an actively ventilated trailer. Six transport test runs were conducted at average ambient temperatures of -27, -22, -17, -5, +4, and +11 degrees C. Birds were classified into 4 groups based upon the temperatures recorded in their immediate surroundings as follows: -16 to 0, 0 to 10, 10 to 20, and 20 to 30 degrees C. Internal body temperatures of the birds were recorded using Thermocron DS1922L iButtons. Birds were slaughtered in a commercial facility and meat quality of the chilled carcasses was evaluated by determination of pH, color, drip loss, thaw loss, cook loss, shear force, water-binding capacity, and pellet cook yield of the pectoralis major muscle. The breast meat from birds exposed to temperatures below 0 degrees C showed a significantly higher (P < 0.05) ultimate pH. Breast meat from birds exposed to temperatures below 0 degrees C showed significantly higher (P < 0.05) ultimate pH, a* value, water-binding capacity, and pellet cook yield and a significantly lower L* compared with breast meat of birds exposed to temperatures above 0 degrees C. The average core body temperatures were significantly lower (P < 0.05) during transport for birds exposed to temperatures below 0 degrees C compared with those exposed to temperatures between 0 and 10 degrees C. The latter birds had significantly lower (P < 0.05) core body temperatures compared with those exposed to temperatures above 10 degrees C. Thaw loss was significantly higher (P < 0.05) for breast meat of birds exposed to temperatures above 20 degrees C during transportation. There was no significant trend for b* value, drip loss, cook loss, or shear values based on environment temperature immediately surrounding the birds. Exposure to temperatures below 0 degrees C increased the incidence of dark, firm, and dry breast meat and decreased the incidence of pale, soft, and exudative breast meat. These results demonstrate that preslaughter transport may influence breast meat quality characteristics of broiler chicken.

The suitability of chickpea grown in Western-Canada was studied in a low-fat (fat

Five hundred thirty-six finishing pigs were placed on experiment for an average of 26 d prior to slaughter, to determine the effects of 5 mg ractopamine hydrochloride (RAC) per kg of diet on growth performance, carcass composition and the eating quality of pork. Treatments included a control diet similar to a western Canadian commercial finishing diet and a treatment diet containing 5 mg RAC kg-1 with elevated amino acids, vitamins and minerals. The experiment started when average animal weight was 86 kg; pigs were marketed at an average liveweight of 118 kg. Two pigs were selected from each of 32 pens in week 4 of the experiment, for detailed carcass and meat quality evaluation, providing 16 pigs per gender per treatment. RAC-fed pigs reached market weight 4 d sooner (P < 0.05), grew 13 % faster (P < 0.05) and had 13% better feed efficiency (P < 0.05) than the controls. RAC-fed pigs also had 1 mm less backfat and 2.5 mm thicker loins (P < 0.05). Ultimate pH, purge loss and visual colour scores were unaffected by treatment but RAC-fed pigs had lower CIE a* and b* measurements (P < 0.05). RAC had no effect on juiciness, flavour, saltiness or overall acceptability (P > 0.10), but increased Warner-Bratzler shear force and reduced taste panel tenderness slightly (P < 0.05). The inclusion of 5 mg RAC kg-1 in a commercial finishing diet will increase the rate and efficiency of gain and improve carcass composition. Minimal impact on pork quality can also be expected with the use of RAC fed at this level. Key words: Ractopamine, swine, carcass composition, pork quality, beta-adrenergic agonist

Biochemical and physicochemical properties of thermally treated natural actomyosin (NAM) from normal and pale, soft and exudative (PSE) pork were studied. About 37% and 25% of available sulphydryl groups formed disulphide bonds or other permanent chemical bonds at 70 °C in NAM from normal and PSE pork, respectively. Surface hydrophobicities of NAM from normal and PSE pork at 70 °C were 3.6 and 2.4 times greater than that at 40 °C. About 90% of the α-helical structure of NAM was lost by heating to 70 °C. The temperature at maximum α-helical content decline of NAM was in accordance with the peak 3 thermal transition obtained by differential scanning calorimetry and the lowest storage modulus ( G ′) during thermal rheology. NAM from normal pork underwent aggregation with a higher extent of hydrophobic interaction and disulphide bonds, higher temperatures at maximum velocity for conformational change and unfolding than that from PSE pork. As a consequence, NAM from normal pork had superior rheological properties.

The objective was to assess different beef muscles for use as stir-fry. Inside round, outside round, eye of round, knuckle, chuck clod, and chuck tender were obtained from six beef carcasses. Different slice thickness (2, 4, or 8mm) and muscle fiber direction were evaluated. Slices were cooked from frozen on a flat grill and then cut into strips for shear and sensory testing. While meat cut had little effect on shear values of these thin slices, increasing slice thickness greatly affected tenderness and cook yield. The sensory panel found that strips from the knuckle were more tender and juicy, with less connective tissue and with a better flavor than that of slices from the eye of round and outside round. Increasing slice thickness resulted in detection of greater amounts of connective tissue but did not result in a significant difference in the perception of tenderness. Fiber direction was also of importance. Slices removed perpendicular to the fiber direction had shear values up to 50% lower than slices removed parallel.

Rheological properties of heat-induced pea protein isolate (PPI) gels with added microbial transglutaminase (MTGase) were studied under various reaction conditions. A positive linear relationship was observed between level of MTGase used (0 to 0.7% w/w) and shear stress and shear strain of heat-set commercial pea protein isolate (PPIc) gels at 92 °C following incubation at 50 °C. Use of MTGase allowed for preparation of PPIc gels of similar strength and elasticity as commercial soy protein isolate gels and commercial meat bologna. MTGase treatment did not alter thermal properties of PPI gels. The shear stress and strain of PPIc gels were also improved following low temperature (4 °C) incubation of PPI with MTGase. Enhancement of shear strain or gel elasticity of heat-induced PPI gels with MTGase has not been reported before and provides opportunities for extending the properties of pea proteins when developing new food products.

The combined effect of incorporation of four non-muscle proteins, NMP (blood plasma, BP; sodium caseinate, SC; soy protein isolate, SPI; gelatin, G) at 2 g/100 g levels on hydration and textural characteristics of pork gels processed without or with 0.6 g/100 g microbial transglutaminase preparation (MTG) was investigated. Addition of SC and BP most favourably affected hydration properties and thermal stability, yielding lower cooking loss and expressible moisture for pork gels. Interactions between NMP and MTG were observed. Improvement of gel strength by addition of transglutaminase was observed for treatments containing SC and BP but not G nor soy isolate. Of the four proteins tested SC was found to be a superior substrate for MTG in enhancing textural properties of a gelled meat system. None of the tested ingredients was able to yield gel cohesiveness equivalent to the control containing 8% muscle proteins. Results of this study indicate a potential for using MTG to improve or modify the functional and textural properties of investigated food proteins (SC and BP in particular) in comminuted meat products.

Chemical and thermal properties of pea protein isolates (laboratory prepared or native; PPIn and commercial; PPIc) and textural properties of heat-set gels obtained from pea protein isolates were compared with homologous soy protein isolates (laboratory prepared, or native; SPIn and commercial; SPIc). The protein banding pattern resulting from electrophoresis separation confirmed the presence of predominant storage proteins of pea and soy seeds in the respective protein products. PPIc and SPIc had lower nitrogen solubility than their native counterparts, likely due to their denaturated state which was further confirmed by the absence of distinct endotherms in these commercial materials compared to the laboratory prepared ones. Addition of NaCl at 1.0–2.0% (w/w) to PPIn and SPIn slurries increased thermal transition temperatures for both proteins. The optimal conditions for formation of strong heat-induced gels from PPIc were 19.6% (w/w) protein content, pH 7.1, 2.0% (w/w) NaCl, and heating at 93 °C. SPIc gels prepared under the same conditions were stronger and more elastic than PPIc gels as denoted by texture indictors.

The combined effects of injection, packaging (modified atmosphere packaging [MAP] with 70% O2/ 30% CO2 and vacuum packaging [VP]), storage temperature (-1 °C and +4 °C), and storage time on the color, microbial and oxidative stability of beef and bison longissimus lumborum (LL) steaks were investigated. Beef LL steaks in MAP retained their bright red color longer than bison steaks. Bison steaks developed higher 2-Thiobarbituric acid reactive substances (TBARS) during storage, and this might have influenced the resulting rapid loss of redness from the bloomed meat. Storage at -1 °C in MAP provided greater color stability and a longer storage life for both meat species studied. Injection of salt/phosphate had a beneficial effect on the color stability of steaks during retail display; however, this positive effect was more pronounced for bison steaks compared with those of beef. Steaks stored overnight under MAP before retail display maintained the highest a* values for up to 5 d compared with those stored under vacuum. MAP-OV steaks generally maintained the highest OMB content for up to 5 d during retail display compared with those stored under vacuum. Nevertheless, OMB levels were significantly (P < 0.05) lower in bison steaks compared with those of beef irrespective of packaging treatments. Injected steaks and those stored at -1 °C had significantly (P < 0.05) higher OMB levels compared with non-injected counterparts and those stored at +4 °C, respectively. MAP is an excellent option for short-term storage due to its positive effects on meat color, but for longer storage, VP may be necessary. Storing meat under vacuum and then placing it under MAP just before retail display might be another option to increase shelf life.

Defining cellular responses at the level of global cellular kinase (kinome) activity is a powerful approach to deciphering complex biology and identifying biomarkers. Here we report on the development of a chicken-specific peptide array and its application to characterizing kinome responses within the breast (pectoralis major) and thigh (iliotibialis) muscles of poultry subject to temperature stress to mimic conditions experienced by birds during commercial transport. Breast and thigh muscles exhibited unique kinome profiles, highlighting the distinct nature of these tissues. Against these distinct backgrounds, tissue- and temperature-specific kinome responses were observed. In breast, both cold and hot stresses activated calcium-dependent metabolic adaptations. Also within breast, but specific to cold stress, was the activation of ErbB signaling as well as dynamic patterns of phosphorylation of AMPK, a key regulatory enzyme of metabolism. In thigh, cold stress induced responses suggestive of the occurrence of tissue damage, including activation of innate immune signaling pathways and tissue repair pathways (TGF-β). In contrast, heat stress in thigh activated pathways associated with protein and fat metabolism through adipocytokine and mammalian target of rapamycin (mTOR) signaling. Defining the responses of these tissues to these stresses through conventional markers of pH, glycolytic potential, and meat quality offered a similar conclusion of the tissue- and stressor-specific responses, validating the kinome results. Collectively, the results of this study highlight the unique cellular responses of breast and thigh tissues to heat and cold stresses and may offer insight into the unique susceptibilities, as well as functional consequences, of these tissues to thermal stress.

In light of palatability concerns with beef semitendinosus (ST), its resistance to tenderization by more conventional methods, and its large content of elastin, investigation into the efficacy of enzyme injection was undertaken. Pancreatin, an enzyme cocktail for cheese making, was chosen for its content of elastase, amongst other enzymes, making it a suitable choice for use in the ST. To compare with uninjected controls, samples were prepared to contain a conservative level (0.01% delivered) of pancreatin, salt/phosphate brine, or a combination of enzyme with brine, injected to 105 or 110% green weight. Injection treatment significantly affected several meat quality attributes, while injection level did not. Where water alone was used as the enzyme carrier for injection, an excessive amount of drip loss was observed, with no improvement in tenderness. Salt/phosphate improved brine retention, increased pH, and resulted in darker meat colour. A significant reduction in shear was observed following injection with the enzyme/brine combination, results indicating that ST tenderness can be improved by 9–15% with the modest level of pancreatin used in this injection treatment. Further investigation is recommended to evaluate the tenderization potential using higher enzyme levels, and to examine the safety and sensory aspects of pancreatin use. Key words: Enzyme, moisture enhancement, phosphate injection, elastase, beef semitendinosus

The combined effect of marination and different cooking regimes on the cooking yield and palatability of bison and beef top round roasts was investigated. Semimembranosus (SM) muscles from beef and bison top rounds were injected with a marinade to achieve 20% extension by weight and 0.5% sodium chloride and 0.3% sodium tripolyphosphate levels and then subdivided into 4 roasts and cooked by following 4 cooking regimes: cooking at a constant temperature of 75 °C (control; C); similar to the control treatment except that roasts were held at an internal temperature of 55 °C for 45 min (Hold45) or 90 min (Hold90) prior to final cooking at 75 °C; initial cooking at 55 °C with a 5 °C increase in oven temperature every hour (Step-up) until the 71 °C internal temperature was achieved. Cooking yield, expressible moisture, purge, and shear force of processed roasts were determined. Marination by injection improved the yield and tenderness of beef and bison SM roasts. The cooking yield for injected samples (78%) was significantly (P < 0.05) higher compared with noninjected controls (68%). Injected SM roasts from bison had lower cooking losses than these from beef, whereas control samples from these 2 species did not differ in their cooking yields. Infected beef SM was more tender than bison SM; however, marination significantly reduced the shear force values of SM coasts for both species (i.e., shear force values of 82 N in control samples was reduced to 63 N in injected onest. The cooking regimes, Hold45, Hold90, and Step-up (which allowed a longer time at 55 to 60 °C), gave products with lower (P < 0.05) shear force values than those of the controls. Based on the cooking yield and time involved, the Hold45 treatment performed the best.

Effects of sodium tripolyphosphate (STPP; 0.1, 0.2, or 0.3%) and 0.5% Nacl on the color, cooking yield, and tenderness of moisture-enhanced elk longissimus lumborum (LL) and semimembranosus (SM) muscles were assessed. Injected samples had significantly (P < 0.05) lower L, a, and b values and significantly (P < 0.05) higher cooking yields and lower shear force values compared to controls; shear force values did not differ among marination treatments. The amino acid composition of elk meat was typical for those of red meat species. Elk meat was very lean and had a relatively high ratio of polyunsaturated to saturated fatty acids. The present study found that addition of 0.5% NaCl with 0.2% or 0.3% STPP to the marinade was best at improving the cooking yield and tenderness of the resultant products.

The bulk of the world's goat population is found in South-East Asia and Africa, where goats are the major source of meat production. Unfortunately, lack of an organized goat meat industry and marketing structure in developing countries is primarily responsible for their poor export earnings compared to those in developed countries such as Australia and New Zealand. Goat meat is leaner than meat from other domestic red meat species as well as being comparable in terms of its nutritional constituents. Furthermore, there are few, if any, religious or cultural taboos limiting the consumption of goat meat. Development of a carcass grading system and a suitable infrastructure in developing countries are some of the key requirements needed to establish a sustainable goat meat industry in the world. With an increase in demand by consumers for low-fat red meat alternatives, the future of the goat meat industry looks promising.

The effect of muscle cut used and brine injection level on the processing characteristics of small pre-cooked roast beef was determined. Meat cuts (inside, outside, eye of round, knuckle, clod, chuck roll and brisket) were cut into small roasts (750 g) and injected at three levels (110, 125 and 150% over raw roast weight) with a non-injected control. Muscle cuts from the chuck can be used to successfully manufacture cooked mini roast beef. However, the use of small roasts resulted in cook yields that are considerably less than what was expected with large intact muscle roasts. Some variation in tenderness between the muscles was seen, but when muscles were injected there was a significant increase in tenderness and a reduction in the variability in tenderness within the muscle. Roasts injected to 125% above green weight resulted in the highest cook yields.

All ultra-low-fat (< 1%) pork bolognas had similar cook yield and composition. Addition of 4% hull-less waxy barley flour or meal to formulations provided the greatest purge control; 4% normal starch barley, wheat flour and potato starch were intermediate; 0.25% kappa-carrageenan or 1% soy protein concentrate had little effect on water holding and texture. Expressible moisture and purge were significantly correlated to moisture content and batter viscosity. Formulations with wheat flour and waxy barley meal were scored the firmest, while bologna with potato starch required the most force to compress. For most sensory properties, barley fractions performed similarly

Cured meats such as ham can undergo premature spoilage on account of the proliferation of lactic acid bacteria. This spoilage is generally evident from a milkiness in the purge of vacuum-packaged sliced ham. Although cured, most hams are at more risk of spoilage than other types of processed meat products because they contain considerably higher concentrations of carbohydrates, approximately 2 to 7%, usually in the form of dextrose and corn syrup solids. Unfortunately, the meat industry is restricted with respect to the choice of preservatives and bactericidal agents. An alternative approach from these chemical compounds would be to use novel carbohydrate sources that are unrecognizable to spoilage bacteria. L-Glucose and D-tagatose are two such potential sugars, and in a series of tests in vitro, the ability of bacteria to utilize each as an energy source was compared to that of D-glucose. Results showed that both L-glucose and D-tagatose are not easily catabolized by a variety of lactic bacteria and not at all by pathogenic bacteria such as Escherichia coli O157:H7, Salmonella Typhimurium, Staphylococcus aureus, Bacillus cereus, and Yersinia enterocolitica. In a separate study, D-glucose, L-glucose, and D-tagatose were added to a chopped and formed ham formulation and the rate of bacterial growth was monitored. Analysis of data by a general linear model revealed that the growth rates of total aerobic and lactic acid bacteria were significantly (P < 0.05) slower for the formulation containing D-tagatose than those containing L- or D-glucose. Levels of Enterobacteriaceae were initially low and these bacteria did not significantly (P < 0.20) change in the presence of any of the sugars used in the meat formulations. Compared to the control sample containing D-glucose, the shelf life of the chopped and formed ham containing D-tagatose at 10 degrees C was extended by 7 to 10 days. These results indicate that D-tagatose could deter the growth of microorganisms and inhibit the rate of spoilage in a meat product containing carbohydrates.

SDS-PAGE banding patterns of myofibrillar protein samples from turkey breast muscle with pHor =5.8 at 15 min post-mortem (rapid glycolyzing) contained 133, 142, and 165 kDa bands that were absent in samples from carcasses with pH6.0 at 15 min post-mortem (normal glycolyzing). These extra protein bands contained fragments of myosin as identified by Western blot analysis. Myosin fragments were also observed in protein samples from breast muscle not allowed to cool until 110 min post-mortem (delay chilled). In addition to myosin degradation, neublin degradation was more extensive in samples from rapid glycolyzing carcasses than for normal controls. Creatine kinase and glycogen phosphorylase were present in myofibrillar protein extracts of rapid glycolyzing carcasses in higher quantities than in normal controls. Results of this study provide insight into the molecular basis for previously reported reductions in meat quality of rapid glycolyzing and delay chilled turkey meat.

Effects of rapid postmortem metabolism and delayed chilling on turkey breast meat quality were assessed using color measurements, protein extractability, and gelation characteristics. Based on 15 min postmortem breast muscle pH, tom turkey carcasses were classified as rapid glycolyzing (RG), pH5.80, or normal glycolyzing (NG), pH6.00. Two carcasses per group with similar ultimate pH values were selected on four occasions for a total of 16 carcasses. One half of each carcass was immersion-chilled at 20 min postmortem, the other half was maintained at body temperature for 110 min and then chilled. Breast meat from RG carcasses had higher carcass temperature (15 min) and lower protein (sarcoplasmic and myofibrillar) extractability than breast meat from NG carcasses. Delayed chilling increased all breast meat color values (L*, a*, b*), and decreased protein extractability and cook yield compared to breast meat from immediately chilled carcass halves. The true strain of cooked gels was reduced for RG carcasses. Delayed chilling reduced both true strain and stress of meat gels. There were no interactions between the rate of postmortem pH decline and initiation of chilling, indicating that reductions in meat quality due to delayed chilling were independent of the carcass classification for rate of postmortem glycolysis. Results indicate that factors that affect both rate of postmortem glycolysis and carcass temperature decline are important to turkey breast meat quality.

The eating quality of beef from steers fed either conventional, brewers' grain or wheat-based distillers' grain rations during backgrounding and finishing was assessed. Carcass traits, raw proximate composition and fatty acid composition of the longissimus muscle were generally unaffected (P

The degradation of oxytetracycline (OTC) was observed at 60, 70, and 80 °C in several different aqueous and tissue media. In aqueous media, the rate of OTC degradation (kobs) was found to be independent of glycerol adjusted water activities in the range of 0.6 to 1.0. Orthophosphate was observed to increase kobs; in contrast, polymeric phosphates (sodium pyrophosphate, sodium tripolyphosphate, and sodium hexametaphosphate) were observed to significantly decrease kobs. Sodium nitrite decreased kobs at 80 °C. OTC degradation was found to occur at a slower rate in porcine tissue than in aqueous media. Addition of orthophospate (0.5% as anhydrous dibasic sodium phosphate) to tissue resulted in no observable change in kobs; addition of polyphosphates (equivalent to 0.5% anhydrous dibasic sodium phosphate) increased kobs. Sodium nitrite (200 ppm) in tissue increased kobs at 60 °C but decreased it at 80 °C. Inclusion of calcium chloride significantly decreased kobs in both aqueous and tissue matrices. Thermal tr...

Twenty-four halothane positive (HP) pigs received ammonium chloride (8 g/L), sodium bicarbonate (12.6 g/L) or water (HP control) ad libitum for 4 days and were then slaughtered. Hams from HP animals were pale, soft and exudative (PSE) and of inferior processing quality. Ammonium chloride induced a metabolic acidosis which further impaired cured ham quality (greater thaw purge, lower juiciness scores and less uniform slice appearance than comparable hams from control or bicarbonate treated HP hogs). Blood pH, carbonate and chloride concentration (day 3) were related to cured ham quality, indicating that acid-base balance may influence subsequent meat quality. Use of an alkaline salt provided little protection against PSE.

1. A study was designed to characterise dark, firm, dry (DFD) breast meat resulting from cold exposure of broilers and compare its properties with normal breast meat from cold-stressed and control birds. 2. A total of 140 broilers were selected from 5- and 6-week-old birds exposed to cold temperatures ranging from -18 to -4°C, or a control temperature of +20°C for 3 h in an environmental chamber. Half of these birds were slaughtered immediately following the cold exposure and the other half were given 2 h of lairage. 3. Breast meat samples were categorised based on ultimate pH (pH(u)) and colour L* (lightness) values into normal (5·7 ≤ pH(u)≤ 6·1; 46 ≤ L* ≤ 53) breast meat from control (control-normal) or cold-stressed (cold-normal) birds, and DFD (pH(u) 6·1; L* 46) breast meat, which only occurred in cold-stressed birds (cold-DFD). 4. Residual glycogen was not different between cold-DFD and control-normal breast meat. Lactate concentration was lower in cold-DFD compared with control-normal breast meat. Lactate concentration almost tripled for all the samples by 30 h post-mortem, which resulted in a drop in pH of normal meat, but did not have any effect on pH of DFD breast meat. Glycolytic potential at both 5 min and 30 h post-mortem was lower in DFD breast meat compared with the normal breast meat from both cold-stressed and control birds. 5. Cold-DFD breast meat was significantly darker, with higher pH(u), lower cook loss, higher water-binding capacity and processing cook yield than cold-normal and control-normal breast meat, which were not different from each other.

This paper reviews the effects of road transport on the welfare, carcass and meat quality of cattle, swine and poultry in North America (NA). The main effects of loading density, trailer microclimate, transport duration, animal size and condition, management factors including bedding, ventilation, handling, facilities, and vehicle design are summarized by species. The main effects listed above all have impacts on welfare (stress, health, injury, fatigue, dehydration, core body temperature, mortality and morbidity) and carcass and meat quality (shrink, bruising, pH, color defects and water losses) to varying degrees. It is clear that the effect of road transport is a multi-factorial problem where a combination of stressors rather than a single factor is responsible for the animal's well-being and meat quality post transport. Animals least fit for transport suffer the greatest losses in terms of welfare and meat quality while market ready animals (in particular cattle and pigs) in good condition appear to have fewer issues. More research is needed to identify the factors or combination of factors with the greatest negative impacts on welfare and meat quality relative to the species, and their size, age and condition under extreme environmental conditions. Future research needs to focus on controlled scientific assessments, under NA conditions, of varying loading densities, trailer design, microclimate, and handling quality during the transport process. Achieving optimal animal well-being, carcass and meat quality will entirely depend on the quality of the animal transport process.

The thermal properties of kappa-carrageenan (KC) and/or beef under various ionic conditions were evaluated using Differential Scanning Calorimetry (DSC). The single endotherm observed for 2% aqueousKC (Tmax at 53 o C) shifted to 3439 i C with addition of 1-3% NaCl and 0.33% sodium tripolyphosphate. Three endotherms were observed for post-rigor bovine semimembranosus meat (Tmax at 37, 66 and 80 o C). Addition of salt/phosphate to beef had greater effects on Tmax than did 2% KC. On rescanning following 24 hr refrigerated storage, beef samples showed no thermal response, while KC treatments and beef/KC mixtures showed single endotherms at 53-63 and 69-76 o C, respectively, indicating a wide shift in melting temperature of KC both in the presence of meat and at higher ionic strength

1. Turkey poults (1620) were used to compare the effects of three lighting programmes on heavy strain males reared to 188 d: constant light (24L:0D, CON); increasing light (6L:18D at 7 d gradually increasing to 20L:4D by 63 d, INC); a pattern identical to INC followed by a decrease in daylength from 84 d to 10L:14D at 112 d (DID). 2. Lighting affected growth pattern but had no effect on body weight at 118 d or overall food to gain ratio. 3. Both INC and DID lighting reduced overall mortality in comparison to CON light primarily because of a reduction in the incidence of skeletal disease and spontaneous cardiomyopathy. INC and DID lighting increased the incidence of cannibalism. 4. Turkeys given INC or DID lighting had a superior ability to walk in comparison to those birds given CON light. 5. INC and DID males stood, ate and drank more frequently, and sat less often than CON turkeys during behavioural observation. 6. There were no lighting effects on carcase composition except that INC and DID birds had heavier keel bones. The ultimate force per cm2 (stress) required to break femora was greater for turkeys given INC and DID lighting (P = 0.065). 7. Plasma testosterone concentrations at 117 d were 272.5, 115.2 and 29.5 pg/ml for turkeys given CON, INC and DID lighting, respectively (P = 0.072). Testosterone concentration was not related to growth rate.

During the winter in Western Canada, broilers are routinely transported in ambient temperatures ranging from 0°C to -40°C, yet there is little research in this area. This study examined the physiology and behavior of broilers undergoing simulated transport at typical Western Canadian winter temperatures. Groups of 15 broilers aged 32 to 33 d were exposed to an air stream regulated to -5, -10, or -15°C. Birds were placed into a typical transport drawer. Following baseline observations, the drawer was placed into a test chamber where cold air was drawn past the birds for 3 h. Three replications were conducted at each temperature. The birds adjusted their position within the drawer based upon the temperature distribution within the drawer. In comparison to the baseline period, exposing the birds to a cold air stream caused them to avoid the front plane (P = 0.003) which was the coldest area within the drawer. The birds did not adjust their usage of the middle (P = 0.308) and rear (P = 0.640) planes, because these were the warmer areas within the drawer. The total amount of space the birds occupied within the drawer did not decrease when exposed to the test chamber (P = 0.669). The core body temperature (CBT) did not vary and was within the known normal range during the normal (P = 0.528), pre-chamber (P = 0.060), and post-chamber (P = 0.285) periods. The CBT of the birds significantly decreased during the in-chamber period (P0.001) and then increased during the lairage period (P0.001). The shrink loss (P = 0.981) and amount of time to resume feed consumption (P = 0.357) were not affected by exposing the birds to temperatures of -5°C and colder. Exposing birds to temperatures of -5°C and colder had a negative effect on the CBT of the birds. However, the birds demonstrated behaviors which mitigated the negative effect that cold exposure could have on their CBT.

To ensure broiler welfare during winter transport, it is necessary to manage heat and moisture accumulation within the transport vehicles. Hence, it is necessary to determine heat production (HP) and moisture production (MP) rates under representative conditions. An environmental chamber containing a standard transport drawer was used. Cold air was drawn from outside the building, warmed to the desired temperature, and passed through the drawer at 0.35 m(3)/s. Broilers were fasted for 7 h, placed into the drawer, and exposed to test conditions within the chamber for 3 h. Air temperature and RH were measured upstream and downstream of the insulated bird compartment at 1-min intervals. Differences in the paired temperature and RH values were used to calculate sensible HP and MP for each 1 min of confinement. Effects of temperatures between -8 and -18°C and a control (+20°C) were measured for birds in 2 conditions. In condition A, there were 15 birds/drawer. Birds were 32 to 33 d old and weighed 1.8 kg. Packing density was approximately 27 kg/drawer (31 kg/m(2)). In condition B, there were 19 or 22 birds/drawer. The drawers with 19 birds contained birds that were 39 to 40 d old that weighed 2.68 kg. In the drawers with 22 birds, the birds were 35 to 36 d old and weighed 2.29 kg. In either case, the packing density was approximately 50 kg/drawer (59 kg/m(2)). Thus, the birds in condition B were bigger, more numerous, and more tightly packed than the birds in condition A. Drawers were balanced for sex. At +20°C, HP and MP rates were similar to other published values. However, for both conditions, HP and MP rates increased with decreasing exposure temperatures. In condition A, HP was 6.08 ± 0.43 W/kg and MP was 4.46 g/h per kg at 20°C compared with 87.5 ± 10.3 W/kg and 22.08 ± 5.05 g/h per kg at -15°C. In condition B, HP was 8.12 ± 1.24 W/kg and MP was 5.53 ± 1.68 g/h per kg at 20°C compared with 45.92 ± 1.95 W/kg and 12.33 ± 0.22 g/h per kg at -18°C.

The scope of this study was to determine the ability of flaxseed (Linum usitatissimum L.) proteins to release angiotensin I-converting enzyme inhibitory (ACEI) peptides during simulated gastrointestinal (GI) digestion using a static (SM; no absorption in the intestinal phase) and a dynamic model (DM; simultaneous absorption of digested products in the intestinal phase via passive diffusion). Gastric and gastric + small intestinal digests of flaxseed proteins of both models possessed ACEI activity. The ACEI activity of the gastric + small intestinal digest in the DM (IC(50) unabsorbed, 0.05 mg N/mL; IC(50) absorbed, 0.04 mg N/mL) was significantly higher (p < 0.05) than that of the SM (IC(50), 0.39 mg N/mL). Two peptides, a pentapeptide (Trp-Asn-Ile/Leu-Asn-Ala) and a hexapeptide (Asn-Ile/Leu-Asp-Thr-Asp-Ile/Leu), were identified in the most active ACEI fraction (0.5-1 kDa) of the absorbable flaxseed protein digest by de novo sequencing.

Halothane positive pigs (24) were placed on water treatments containing sodium bicarbonate (BC, 12.6 g/L), ammonium chloride (AC, 8 g/L) or no additive for 4 days and slaughtered. Halothane negative pigs (8) also were slaughtered. Loin roasts were aged for periods of 1 or 7 days. Loin roasts from animals treated with AC were scored (P

Ten polysaccharide gums at two levels (0.5 and 1.0%) were individually incorporated into algin/calcium (AC) and salt/phosphate (SP) structured beef rolls (

Chickpea (Cicer arietinum L.) seeds are a good source of protein that has potential applications in new product formulation and fortification. The main objectives of this study were to analyse the physicochemical, thermal and functional properties of chickpea protein isolates (CPIs) and compare them with those of soy (SPI) and pea (PPI) protein isolates.Extracted CPIs had mean protein contents of 728-853 g kg(-1) (dry weight basis). Analysis of their deconvoluted Fourier transform infrared spectra gave secondary structure estimates of 25.6-32.7% α-helices, 32.5-40.4% β-sheets, 13.8-18.9% turns and 16.3-19.2% disordered structures. CPIs from CDC Xena, among Kabuli varieties, and Myles, among Desi varieties, as well as SPI had the highest water-holding and oil absorption capacities. The emulsifying properties of Kabuli CPIs were superior to those of PPI and Desi CPIs and as good as those of SPI. The heat-induced gelation properties of CPIs showed a minimum protein concentration required to form a gel structure ranging from 100 to 140 g L(-1) . Denaturation temperatures and enthalpies of CPIs ranged from 89.0 to 92.0 °C and from 2.4 to 4.0 J g(-1) respectively.The results suggest that most physicochemical, thermal and functional properties of CPIs compare favourably with those of SPI and are better than those of PPI. Hence CPI may be suitable as a high-quality substitute for SPI in food applications.