Search

Comprehensive Summary: The morphology of the active layer plays a crucial role in the performance of organic photovoltaics. Although volatile additives are commonly used to manipulate the morphology, their mechanism of action remains poorly understood. In this study, we conducted a systematic exploration of the mechanism of the traditional volatile additive 1‐CN in film formation kinetics of typical PM6:Y6 system. We found that 1‐CN induces a secondary aggregation effect, improving film morphology and promoting face‐on crystalline orientation. Through elucidating its impact on exciton dynamics, we established a link between morphology optimization and increased exciton diffusion length and accelerated charge separation. Our findings unveil the unique mechanism of action of volatile additive, providing a new perspective for improving the morphology and enhancing the performance of organic photovoltaic devices. [ABSTRACT FROM AUTHOR]

Thermally activated delayed fluorescence (TADF) emitters potentially can provide organic light‐emitting diodes with 100% internal quantum efficiency by harvesting triplet excitons. Generally, TADF emitters are small molecules that are not applicable for solution processability. The addition of tert‐butyl groups to the periphery of TADF emitters has proven to improve their solubility in various organic solvents, reduce aggregation‐induced quenching, and enhance the photoluminescence quantum yield (PLQY). This article studies the photophysical influence of the tert‐butyl group attached to an emitter with a carbazole acceptor and a triazine donor. The resulting t3CzTrz‐F is a blue–green TADF emitter, in which the addition of a tert‐butyl group increases the rate of reverse intersystem crossing (rISC), while simultaneously decreasing the nonradiative decay rate substantially. In addition, dilution of t3CzTrz‐F in a host matrix in film results in an enhanced PLQY, which is associated with a decrease in the nonradiative decay constant, while there is no change in the rISC rate. Through a solid‐state NMR study, the change in rISC and nonradiative rate upon tert‐butylation by enlarged intermolecular spacing and reduced vibrational and rotational freedom is rationalized, resulting in improved photophysical performance. [ABSTRACT FROM AUTHOR]

Two‐coordinate Au(I) complexes with a donor‐metal‐acceptor (D‐M‐A) structure have shown rich luminescent properties. However, charge‐neutral dinuclear donor‐metal‐acceptor type Au(I) complexes featuring aurophilic interactions have been seldom explored. Herein, we describe the structures and photoluminescence properties of two dinuclear Au(I) complexes, namely DiAu‐Ph and DiAu‐Me. Single crystal X‐ray structural analysis of DiAu‐Ph reveals a short intramolecular Au‐Au distance of 3.224 Å. In dilute solution and doped films, excitation wavelength dependent multiple phosphorescence phenomena were observed for these dinuclear complexes. Theoretical calculations reveal that the aurophilic interaction causes increased contribution of the Au d orbital to the highest occupied molecular orbitals. Thus, the gap between singlet and triplet excited states (ΔEST) is enlarged, which disables the thermally activated delayed fluorescence (TADF). Moreover, the large energy separation (0.45–0.52 eV) and the different orbital configurations between the various excited states result in an inefficient internal conversion, accounting for their multiple phosphorescence properties. [ABSTRACT FROM AUTHOR]

Incorporation of the trimethoxyphenyl group at position 7 of flavin can drastically change the photophysical properties of flavin. We show unique fast singlet 1(π,π*) excited state deactivation pathway through nonadiabatic transition to the 1(n,π*) excited- state, and subsequent deactivation to the ground electronic state (S0), closing the photocycle. This mechanism explains the exceptionally weak fluorescence and the short excited–state lifetime for the flavin trimethoxyphenyl derivative and the lack of excited triplet T1 state formation. Full recovery of flavin in its ground state takes place within a 15 ps time window after photoexcitation in a polar solvent such as acetonitrile. According to quantum chemical calculations, the C(2)-O distance elongates by 0.16 Å in the 1(n,π*) state, with respect to the ground state. Intermediate–state structures are predicted by theoretical ab initio calculations and their dynamics are investigated using broadband vis-NIR time-resolved transient absorption and fluorescence up-conversion techniques. [ABSTRACT FROM AUTHOR]

The demands of a sustainable chemical industry are a driving force for the development of heterogeneous catalytic platforms exhibiting facile catalyst recovery, recycling, and resilience to diverse reaction conditions. Homogeneous‐to‐heterogeneous catalyst transitions can be realized through the integration of efficient homogeneous catalysts within porous matrices. Herein, we offer a versatile approach to understanding how guest distribution and evolution impact the catalytic performance of heterogeneous host–guest catalytic platforms by implementing the resonance energy transfer (RET) concept using fluorescent model systems mimicking the steric constraints of targeted catalysts. Using the RET‐based methodology, we mapped condition‐dependent guest (re)distribution within a porous support on the example of modular matrices such as metal–organic frameworks (MOFs). Furthermore, we correlate RET results performed on the model systems with the catalytic performance of two MOF‐encapsulated catalysts used to promote CO2 hydrogenation and ring‐closing metathesis. Guests are incorporated using aperture‐opening encapsulation, and catalyst redistribution is not observed under practical reaction conditions, showcasing a pathway to advance catalyst recyclability in the case of host–guest platforms. These studies represent the first generalizable approach for mapping the guest distribution in heterogeneous host–guest catalytic systems, providing a foundation for predicting and tailoring the performance of catalysts integrated into various porous supports. [ABSTRACT FROM AUTHOR]

The ultrafast processes caused by photoexcitation of (n-Bu4N)2[Pt(NO3)6] complex in acetonitrile were studied by means of transient absorption (TA) pump-probe spectroscopy and verified by quantum chemical calculations. The primary photochemical process was found to be an inner-sphere electron transfer followed by an escape of an •NO3 radical to the bulk solution. The reaction occurs via the dissociative triplet excited LMCT state of the initial complex. Based on the experimental data and quantum chemical calculations, the mechanism of ultrafast photophysical and photochemical processes is proposed. [ABSTRACT FROM AUTHOR]

A series of new luminescent bimetallic platinum(II) complexes with stimuli‐responsive flexible Lewis pair (FlexLP) ligands are described. The FlexLP ligands consist of a dimesitylboron Lewis acid and diphenylphosphine oxide Lewis base which are in equilibrium between the unbound open form and the Lewis adduct, controlled by the hydrogen bond donating strength of the solvent. Spectroscopic techniques and density functional theory (DFT) calculations were used to interpret the photophysics of the platinum(II) complexes. All complexes exhibit tunable absorption in the region of 300–500 nm and green to orange photoluminescence, depending on the ratio of weak (THF) to strong (MeOH) hydrogen bond donating solvent employed. Spectroscopic and computational data shows that phosphine and peripheral acetylide ligands on the platinum(II) centers have limited influence on the emission energy, indicating the emission originates from the FlexLP‐dominated fluorescence. Using time‐resolved transient absorption spectroscopy it is shown that the complexes undergo intersystem crossing (ISC) to the triplet excited state upon photoexcitation, and the ISC efficiency is affected by the peripheral acetylide ligands. The triplet excited state lifetime can also be manipulated by the state of the FlexLP ligand, with the closed form complexes having longer lifetimes than the open form complexes. [ABSTRACT FROM AUTHOR]

Quasi‐2D lead‐halide perovskites consist of conducting inorganic layers with tunable thickness (n) separated by large organic spacer cations. Typically, domains with different n and bandgaps are formed within a single film. Here, the crystallization of the films is tuned by mixing Dion‐Jacobson (DJ) with Ruddlesden‐Popper (RP) spacer cations. Compared to the quasi‐2D perovskite film based on solely the DJ type spacer 1,4‐phenylenedimethylammonium (PDMA), a film with less defects and more vertically aligned crystallization is achieved by addition of the RP type spacer propylammonium (PA). As the film structure plays an important role in the photophysics, time‐resolved photoluminescence (TRPL) and femtosecond transient absorption (TA) are used to investigate the impact of mixing these spacer cations on the dynamics of hot carrier cooling, the occurrence and directionality of energy or electron transfer between the different domains, and the exciton and charge carrier dynamics. Exciton transfer from low‐n to high‐n domains occurs at a favorable faster rate for the PDMA‐based film (0.0640 ps−1) compared to the PA‐based film (0.0365 ps−1), while the mixed spacer film demonstrates intermediate behavior (0.0473 ps−1). This study facilitates the design of advanced materials with optimized photophysical characteristics for a next generation of optoelectronic devices. [ABSTRACT FROM AUTHOR]

Fluorofluorophores are a unique class of fluorophores that can be solubilized in perfluorocarbons (PFCs) and used to study biological systems. However, because of the low dielectric constant and high oxygen solubility in the fluorous phase, the brightness and photostability of the fluorofluorophores are significantly diminished. Here, we leveraged the tight ion pairing in the fluorous phase to improve the photophysical properties of a fluorous soluble pentamethine dye (FCy5) via counterion exchange. We found that larger, softer, fluorinated, aryl borate counterions promote the ideal polymethine state where charge delocalization across the polymethine chain increases the brightness (6‐fold) and photostability (55‐fold) of FCy5. [ABSTRACT FROM AUTHOR]

David Mauzerall was born on July 22, 1929 to a working-class family in the small, inland textile town of Sanford, Maine. Those humble origins instilled a lifelong frugality and an innovative spirit. After earning his PhD degree in 1954 in physical organic chemistry with Frank Westheimer at the University of Chicago, he joined The Rockefeller Institute for Medical Research (now University) as a postdoctoral fellow that summer, rose to the rank of professor, and remained there for the rest of his career. His work over more than 60 years encompassed porphyrin biosynthesis, photoinduced electron-transfer reactions in diverse architectures (solutions, bilayer lipid membranes, reaction centers, chromatophores, and intact leaves), the light-saturation curve of photosynthesis, statistical treatments of photoreactions, and "all-things porphyrins." His research culminated in studies he poetically referred to as "listening to leaves" through the use of pulsed photoacoustic spectroscopy to probe the course and thermodynamics of photosynthesis in its native state. His research group was always small; indeed, of 185 total publications, 39 were singly authored. In brief, David Mauzerall has blended a deep knowledge of distinct disciplines of physical organic chemistry, photochemistry, spectroscopy and biophysics with ingenious experimental methods, incisive mathematical analysis, pristine personal integrity, and unyielding love of science to deepen our understanding of photosynthesis in its broadest context. He thought creatively – and always independently. His work helped systematize the fields of photosynthesis and the origin of life and made them more quantitative. The present article highlights a number of salient scientific discoveries and includes comments from members of his family, friends, and collaborators (Gary Brudvig, Greg Edens, Paul Falkowski, Alzatta Fogg, G. Govindjee, Nancy Greenbaum, Marilyn Gunner, Harvey Hou, Denise and Michele Mauzerall, Thomas Moore, and William Parson) as part of a celebration of his 95th birthday. [ABSTRACT FROM AUTHOR]

Energy funneling is a phenomenon that has been exploited in optoelectronic devices based on low-dimensional materials to improve their performance. Here, we introduce a new class of two-dimensional semiconductor, characterized by multiple regions of varying thickness in a single confined nanostructure with homogeneous composition. This "noninteger 2D semiconductor" was prepared via the structural transformation of two-octahedron-layer-thick (n = 2) 2D cesium lead bromide perovskite nanosheets; it consisted of a central n = 2 region surrounded by edge-lying n = 3 regions, as imaged by electron microscopy. Thicker noninteger 2D CsPbBr3 nanostructures were obtained as well. These noninteger 2D perovskites formed a laterally coupled quantum well band alignment with virtually no strain at the interface and no dielectric barrier, across which unprecedented intramaterial funneling of the photoexcitation energy was observed from the thin to the thick regions using time-resolved absorption and photoluminescence spectroscopy.

Abstract Incorporation of the trimethoxyphenyl group at position 7 of flavin can drastically change the photophysical properties of flavin. We show unique fast singlet 1(π,π*) excited state deactivation pathway through nonadiabatic transition to the 1(n,π*) excited- state, and subsequent deactivation to the ground electronic state (S0), closing the photocycle. This mechanism explains the exceptionally weak fluorescence and the short excited–state lifetime for the flavin trimethoxyphenyl derivative and the lack of excited triplet T1 state formation. Full recovery of flavin in its ground state takes place within a 15 ps time window after photoexcitation in a polar solvent such as acetonitrile. According to quantum chemical calculations, the C(2)-O distance elongates by 0.16 Å in the 1(n,π*) state, with respect to the ground state. Intermediate–state structures are predicted by theoretical ab initio calculations and their dynamics are investigated using broadband vis-NIR time-resolved transient absorption and fluorescence up-conversion techniques.

Reduced‐dimensional perovskites (RDPs) have advanced perovskite optoelectronic devices due to their tunable energy landscape, structure, and orientation. However, the origin of structural and photophysical property changes when moving from low‐dimensional to high‐dimensional RDPs remains to be understood. This study systematically reveals structural and photophysical properties of slot‐die‐coated Dion‐Jacobson (DJ) and Ruddlesden‐Popper (RP) RDPs with different dimensionalities. RP RDPs with lower dimensionality (n = 2) exhibit a dominant n = 2 phase, preferential out‐of‐plane orientation, and longer charge carrier lifetime compared with DJ RDPs. In addition, the formation kinetics of RDPs with higher dimensionality (n = 4) are unraveled by in situ X‐ray scattering, showing the favorable formation of the lower‐n phase in RP RDPs. The formation of these lower‐n phases is thermodynamically and stoichiometrically favored, while these phases are likely in the form of an “intermediate phase” which bridges the 3D‐like and lower‐n phases in DJ RDPs. DJ RDPs with higher dimensionality demonstrate comparable phase purity, preferential orientation, spatially vertical phase homogeneity, and longer charge carrier lifetime. As such, DJ‐based perovskite solar cells (PSCs) (n = 4) demonstrate better photostability under operational conditions than RP‐based PSCs. Thus, the work paves the way for the utilization of RDPs to upscale PSCs. [ABSTRACT FROM AUTHOR]

In this work, we used DFT and TD‐DFT in the investigation of the structural parameters and photophysics of the complex [Ru(bpy)2dppn]2+ (dppn=benzo[i]‐dipyrido[3,2‐a:2’,3’‐c]phenazine) in water, and its suitability as a photosensitizer (PS) in photodynamic therapy (PDT). For that, the thermodynamics of electron transfer (ET) and energy transfer (ENT) reactions in the excited state with molecular oxygen and guanosine‐5’‐monophosphate (GMP) were investigated. The overall intersystem crossing (ISC) rate constant was approximately 1012 s−1, indicating that this process is highly favorable, and the triplet excited states are populated. The triplet excited states are known to lead to photoreactions between the PS and species of the medium or directly with nucleobases. Here, we show that the Ru‐dppn complex can react favorably to oxidize the GMP and generate singlet oxygen. Furthermore, this complex can also act as an intercalator between DNA base pairs and undergo dual‐channel reactions. It has been proposed that the T2 excited state is responsible for oxidizing the GMP, but we show that T1 is thermodynamically capable of undergoing the same reaction. In this sense, docking simulations were carried out to investigate further the interactions of the Ru‐dppn complex with a DNA fragment. [ABSTRACT FROM AUTHOR]

The one‐pot synthesis of a total of 32 ruthenium(II) and osmium(II) photosensitizers bearing substituted 2,2’‐bipyridines, 1,10‐phenanthrolines, and diaza ligands is reported. Whereas most of these photosensitizers were already reported in the literature, the present study offers extensive datasets of ground‐ and excited‐state properties highly desirable for future development in e. g., machine learning, artificial intelligence, and photoredox catalysis. All photosensitizers absorbed light intensely in the visible part of the spectrum, with the Os(II) photosensitizers absorbing further into the red part. Excited‐state lifetimes and photoluminescence quantum yields were generally larger for Ru(II) photosensitizers than for Os(II) analogs, which agrees with the energy gap law. The excited‐state redox potentials were determined for all investigated photosensitizers covering a range of −0.21 to −1.35 V vs. SCE for excited‐state oxidation and 0.14 to 1.48 V vs. SCE for excited‐state reduction. A procedure for counterion exchange to generate the corresponding PF6−, Cl−, BF4−, NO3−, OTf−, ClO4−, and BArF− is reported for six photosensitizers. The synthetic ease, detailed report of fundamental photophysical properties, and a broad range of excited‐state redox potentials open opportunities for systematic investigations in several applications and further streamline developments in photoredox catalysis. [ABSTRACT FROM AUTHOR]

Tris‐bidentate iridium(III) complexes used in organic light‐emitting diodes (OLEDs) are typically homoleptic or heteroleptic with three or two identical emissive ligands, respectively. Herein red phosphorescence emitting dendrimers composed of first generation biphenyl dendrons, 2‐ethylhexyloxy surface groups and an iridium(III) complex core with three, two or one emissive [4‐phenyl]−2‐[thiophen‐2‐yl]quinoline ligands are reported. The dendrimers have similar photoluminescence quantum yields (PLQYs) in solution (84–88%), neat film (23–25%) and when blended with tris(4‐carbazoyl‐9‐ylphenyl)amine (72–73%), enabling the effect of the number of emissive ligands on OLED performance to be determined. The external quantum efficiency (EQE) of OLEDs composed of neat dendrimer films increased with decreasing number of emissive ligands, with the device composed of the dendrimer having a single emissive ligand having an EQE of 9.2%, which is almost double that expected from a bottom emitting device and a film PLQY of 25 ± 3.6%. The emission is Lambertian and the higher‐than‐expected EQE is ascribed to alignment of the single emissive ligand being optimal for light‐outcoupling. The EQE of OLEDs containing the blend film also increased with decreasing emissive number of ligands (maximum EQE = 15.4%). [ABSTRACT FROM AUTHOR]

A series of phosphine oxide‐containing gold(III) complexes with tunable emission colors spanning from sky‐blue to near‐infrared region is reported. This is accomplished by the switching of the excited state characters from intraligand to ligand‐to‐ligand charge transfer through the replacement of the auxiliary ligand from aryl to nitrogen‐based ligands. In addition to high photoluminescence quantum yields in both solution and solid‐state thin films, these complexes exhibit large radiative decay rate constants of the order of 106 s−1, much larger than those commonly found for other gold(III) complexes. The origin of such enhanced performance is believed to be arising from the occurrence of both thermally activated delayed fluorescence and thermally stimulated delayed phosphorescence processes within the emitters. This is probed by ns‐ and fs‐transient absorption spectroscopy, time‐resolved, and temperature‐dependent emission spectroscopy. In particular, the direct observation of the upconversion processes and the determination of the activation barriers are achieved in the variable‐temperature fs‐transient absorption spectroscopic studies. Solution‐processed organic light‐emitting devices with satisfactory external quantum efficiencies of up to 15.2% are achieved, which could be ascribed to the presence of thermally activated delayed fluorescence and/or thermally stimulated delayed phosphorescence processes. [ABSTRACT FROM AUTHOR]

Triplet‐triplet annihilation upconversion (TTA‐UC) has made significant progress in recent years in several key applications, including solar energy harvesting, photocatalysis, stereoscopic 3D printing, and disease therapeutics. In TTA‐UC research, photosensitizers serve the vital function of harvesting low‐energy photons. The photophysical characteristics of photosensitizers, including absorbance, triplet state quantum yield, triplet state energy level, triplet state lifetime, etc. determine the performance of TTA‐UC. Thus, the study of photosensitizers has been a key aspect of TTA‐UC. In recent years, multi‐resonance thermally activated delayed fluorescence (MR‐TADF) molecules have received extensive attention due to their excellent photophysical properties and electroluminescent device performance. MR‐TADF molecules not only present a narrow energy gap between the singlet and triplet excited states, but also have stronger absorption and better wavelength regulation than conventional TADF molecules. Nowadays, the preliminary attempts in TTA‐UC using MR‐TADF molecules as photosensitizers have resulted in the development of green to ultraviolet, blue to ultraviolet, and even near‐infrared to blue emission. This concept will summarize the research progress of MR‐TADF molecules as photosensitizers in TTA‐UC, analyzing the challenges and giving possible solutions. Finally, we prospect the future development of MR‐TADF molecules as photosensitizers, including the molecular design as well as the possible application areas. [ABSTRACT FROM AUTHOR]

Owing to the diverse biological application, photophysical behaviour of Hoechst 33258 (H33258) is an important topic in biophysical research. Here, we have reported the photophysical behavior of H33258 in model biomembrane mimicking micellar microenvironment. In order to understand the molecular mechanism of the interaction of H33258 with micelles, we have used cationic (Hexadecetyltrimethyl ammonium bromide (CTAB)), anionic (sodium dodecyl sulphate (SDS)), and non‐ionic (t‐octylphenoxypolyoxyethanol, Triton‐X100 (TX 100)) micelles. From the steady‐state emission study the evaluated apparent binding constant (Kb) values for the complex formation between H33258 and CTAB, SDS and TX 100 micelle were (1.45±0.42)×105, (31.95±4.89)×105 and (3.10±0.73)×105 M−1, respectively. Thus, it was found that the Kb value was greater in the case of anionic micelle than non‐ionic and cationic micelles. Such differences in Kb values were due to the electrostatic interaction and hydrogen bond formation between the probe molecule and micelles. In addition, time‐resolved fluorescence decay and time‐resolved fluorescence anisotropy studies were performed to understand the dynamical behavior of H33258 in presence of micelles. The interaction of H33258 with micelles might be useful to study the structure and dynamics of different bio‐membranes and to formulate new drug delivery system. [ABSTRACT FROM AUTHOR]

Porphyrin‐based metal‐organic frameworks (MOFs) have received great attention for solar photochemistry applications. Manipulating the direction of energy (exciton) migration plays an essential role in boosting the light‐harvesting efficiency of porphyrin‐based MOFs. Here, based on the time‐dependent exciton‐exciton annihilation rate, an optical control of directional exciton migration is demonstrated in cobalt‐porphyrin surface‐supported MOF nanofilms (Co‐TCPP SURMOFs). Utilizing photocarrier densities or lattice temperature as the control knob, the dynamic form of exciton migration in Co‐TCPP SURMOFs can be switched between the nearest‐neighbor 1D interaction and the quasi‐isotropic 2D interaction, which is well explained using a diffusion model of exciton‐exciton scattering. This results provide an optical approach to regulating exciton migration in MOFs, which enhances understanding of the excitonic behavior in artificial light harvesters. [ABSTRACT FROM AUTHOR]

The irradiation of β‐enaminones, generated in situ from cyclic 1,3‐diketones and activated alkenes leads to polyheterocyclic skeletons. The photoproduct chemoselectivity depends on the type of cyclic 1,3‐diketones employed viz., 2‐acetylcyclopentanone and 2‐acetylcyclohexanone. The observed chemoselectivity was rationalized based on the Dieckmann‐Kon rule. [ABSTRACT FROM AUTHOR]

[Display omitted] Using ultrafast transient absorption spectroscopy, primary photophysical processes in aqueous and acetonitrile solutions of the trans , trans , trans -[Ptiv (N 3) 2 (py) 2 (OH) 2 ] complex, which is interesting as a potential light-activated anticancer drug, were investigated. A mechanism for early photoprocesses has been proposed, including ultrafast intersystem crossing and reductive dissociation. [ABSTRACT FROM AUTHOR]

A close mimic of P680 and the TyrosineZ‐Histidine190 pair in photosystem II (PS II) has been synthesized using a ruthenium chromophore and imidazole‐phenol ligands. The intramolecular oxidation of the ligands by the photoproduced Ru(III) species is characterized by a small driving force, very similar to PS II where the complexity of kinetics was attributed to the reversibility of electron transfer steps. Laser flash photolysis revealed biphasic kinetics for ligand oxidation. The fast phase (τ<50 ns) corresponds to partial oxidation of the imidazole‐phenol ligand, proton transfer within the hydrogen bond, and formation of a neutral phenoxyl radical. The slow phase (5–9 μs) corresponds to full oxidation of the ligand which is kinetically controlled by deprotonation of the distant 1‐nitrogen of the imidazolium. These results show that imidazole with its two protonatable sites plays a special role as a proton relay in a 'proton domino' reaction. [ABSTRACT FROM AUTHOR]

The intrinsic quantum nature of molecules opens exciting opportunities for developing the field of quantum information science. In this context, porphyrins stand out as ideal building blocks for quantum technologies thanks to their unique optical and electrical properties as well as their capacity to accommodate metal atoms and ions. This review bridges the chemistry and physics of porphyrins, providing an overview of recent advances in porphyrin‐based molecular qubits. Starting from qubits, the review explores the potential of porphyrin units to combine, leading to the formation of quantum logic gates and hierarchical higher‐dimensional structures. Next, the exploitation of porphyrins' unique photophysical properties for realizing long‐lived high spin states is examined. These states are promising for the photogeneration of multi‐level systems and the optical initialization and control of molecular qubits. With a critical eye on the current state‐of‐the‐art, the review elucidates the future perspectives of porphyrins for advancing quantum technologies. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: Charge generation, a critical process in the operation of organic solar cell (OSC), requires thorough investigation in an ultrafast perspective. This work demonstrates that the utilization of alloy model for the non‐fullerene acceptor (NFA) component can regulate the crystallization properties of active layer films, which in turn affects exciton diffusion and hole transfer (HT), ultimately influencing the charge generation process. By incorporating BTP‐eC7 as a third component, without expanding absorption range or changing molecular energy levels but regulating the ultrafast exciton diffusion and HT processes, the power conversion efficiency (PCE) of the optimized PM6:BTP‐eC9:BTP‐eC7 based ternary OSC is improved from 17.30% to 17.83%, primarily due to the enhancement of short‐circuit current density (JSC). Additionally, the introduction of BTP‐eC7 also reduces the trap state density in the photoactive layer which helps to reduce the loss of JSC. This study introduces a novel approach for employing ternary alloy models by incorporating dual acceptors with similar structures, and elucidates the underlying mechanism of charge generation and JSC in ternary OSCs. [ABSTRACT FROM AUTHOR]

Diblock conjugated oligomers are π-conjugated molecules that contain two segments having distinct frontier orbital energies and HOMO-LUMO gap offsets. These oligomers are of fundamental interest to understand how the distinct π-conjugated segments interact and modify their excited state properties. The current paper reports a study of two series of diblock oligomers that contain oligothiophene (Tn) and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (TBT) segments that are coupled by either ethynyl (-C≡C-) or trans-(-C≡C-)2Pt(II)(PBu3)2 acetylide linkers. In these structures, the Tn segment is electron rich (donor), and the TBT is electron poor (acceptor). The diblock oligomers are characterized by steady-state and time-resolved spectroscopy, including UV-visible absorption, fluorescence, fluorescence lifetimes, and ultrafast transient absorption spectroscopy. Studies are compared in several solvents of different polarity and with different excitation wavelengths. The results reveal that the (-C≡C-) linked oligomers feature a delocalized excited state that takes on a charge transfer (CT) character in more polar media. In the (-C≡C-)2Pt(II)(PBu3)2-linked oligomers, there is weak coupling between the Tn and TBT segments. Consequently, short wavelength excitation selectively excites the Tn segment, which then undergoes ultrafast energy transfer (~1 ps) to afford a TBT-localized excited state. [ABSTRACT FROM AUTHOR]

A theoretical study of the non‐radiative photophysical relaxation mechanisms of the first singlet excited state of benzene, cyclobutadiene and fulvene is presented. For these molecules, the calculation of the Minimum Energy Path (MEP) leading from the Franck–Condon region to the surface crossing with the ground state is carried out. Subsequently, the decomposition of the electronic energies into atomic and pair contributions is performed using the Interacting Quantum Atom (IQA) method. The IQA approach provides the important mechanistic information necessary to rationalise some relevant aspects of the processes, such as the components that explain the appearance of an energy barrier or that favour the crossing between potential energy surfaces (PES); it also allows to quantify the direct effect on the MEP due to the inclusion of a substituent. In particular, it is shown how the IQA energies allow measuring the extent to which the formation of biradicaloid structures affects the crossing of the PES. The analysis of electron density functions suggests that aromaticity is not a driving force on the relaxation processes. Overall, this work shows the potential of the IQA method as a useful tool for the detailed description of photophysical processes. [ABSTRACT FROM AUTHOR]

Two series with three Pt(II) complexes each (PtLPh‐n, PtLFpy‐n) bearing asymmetric tetradentate ligands as dianionic luminophores with variable alkyl chain lengths were synthesized. Hence, each ligand series is distinguished by one of its cyclometallating rings (phenyl vs. 2,6‐difluoropyrid‐3‐yl). Steady‐state and time‐resolved photoluminescence spectroscopic studies in diluted solutions at room temperature and in glassy matrices at 77 K show that the emissive state is mainly centered on the invariantly electron‐rich cyclometalated side while the second ring regulates the admixture of ligand‐centered and metal‐to‐ligand charge‐transfer character. Hence, the radiative rates can be controlled, as indicated by quantum‐mechanical calculations, which also explain the temperature‐dependent trend in the phosphorescence rate constants. Studies in condensed phases (single‐crystal X‐ray diffractometry, polarized optical microscopy, differential scanning calorimetry, steady‐state and time‐resolved photoluminescence micro(spectro)scopy) showed the development of a smectic A mesophase for the fluorinated species bearing the two longest alkyl chains. Nuclear magnetic resonance‐based studies on the thermodynamics of aggregation in solution confirm the marked enthalpic stabilization of aggregates mediated by the polar 2,6‐difluoropyrid‐3‐yl moiety (and to a lesser extent by dispersive forces between the alkyl chains). On the other hand, the negative entropy of aggregation is dominated by the restriction of degrees of freedom involving the peripheral alkyl moieties upon stacking, which becomes increasingly relevant for longer chains. All these factors control Pt···Pt coupling, a crucial interaction for the design of photofunctional mesogens based on Pt(II) complexes. [ABSTRACT FROM AUTHOR]

Thermally activated delayed fluorescence (TADF) emitters potentially can provide organic light‐emitting diodes with 100% internal quantum efficiency by harvesting triplet excitons. Generally, TADF emitters are small molecules that are not applicable for solution processability. The addition of tert‐butyl groups to the periphery of TADF emitters has proven to improve their solubility in various organic solvents, reduce aggregation‐induced quenching, and enhance the photoluminescence quantum yield (PLQY). This article studies the photophysical influence of the tert‐butyl group attached to an emitter with a carbazole acceptor and a triazine donor. The resulting t3CzTrz‐F is a blue–green TADF emitter, in which the addition of a tert‐butyl group increases the rate of reverse intersystem crossing (rISC), while simultaneously decreasing the nonradiative decay rate substantially. In addition, dilution of t3CzTrz‐F in a host matrix in film results in an enhanced PLQY, which is associated with a decrease in the nonradiative decay constant, while there is no change in the rISC rate. Through a solid‐state NMR study, the change in rISC and nonradiative rate upon tert‐butylation by enlarged intermolecular spacing and reduced vibrational and rotational freedom is rationalized, resulting in improved photophysical performance.

We present a new implementation of real-time time-dependent density functional theory (RT-TDDFT) for calculating excited-state dynamics of periodic systems in the open-source Python-based PySCF software package. Our implementation uses Gaussian basis functions in a velocity gauge formalism and can be applied to periodic surfaces, condensed-phase, and molecular systems. As representative benchmark applications, we present optical absorption calculations of various molecular and bulk systems and a real-time simulation of field-induced dynamics of a (ZnO)4 molecular cluster on a periodic graphene sheet. We present representative calculations on optical response of solids to infinitesimal external fields as well as real-time charge-transfer dynamics induced by strong pulsed laser fields. Due to the widespread use of the Python language, our RT-TDDFT implementation can be easily modified and provides a new capability in the PySCF code for real-time excited-state calculations of chemical and material systems.

Cyanobacteria respond to iron limitation by producing the pigment-protein complex IsiA, forming rings associated with photosystem I (PSI). Initially considered a chlorophyll-storage protein, IsiA is known to act as an auxiliary light-harvesting antenna of PSI, increasing its absorption cross-section and reducing the need for iron-rich PSI core complexes. Spectroscopic studies have demonstrated efficient energy transfer from IsiA to PSI. Here we investigate the room-temperature excitation dynamics in isolated PSI-IsiA, PSI, IsiA monomer complexes and IsiA aggregates using two-dimensional electronic spectroscopy. Cross analyses of the data from these three samples allow us to resolve components of energy transfer between IsiA and PSI with lifetimes of 2--3 ps and around 20 ps. Structure-based Förster theory calculations predict a single major timescale of IsiA-PSI equilibration, that depends on multiple energy transfer routes between different IsiA subunits in the ring. Despite the experimentally observed lifetime heterogeneity, which is attributed to structural heterogeneity of the supercomplexes, IsiA is found to be a unique, highly efficient, membrane antenna complex in cyanobacteria. [ABSTRACT FROM AUTHOR]

Rare‐earth element‐free materials that exhibit strong room temperature phosphorescence (RTP) and X‐ray scintillation properties are gaining global interest incessantly in the recent years. This work reports a series of easily synthesizable cubane Cu4I4‐triarsenic clusters [Cu4I4(R3As)3L] (L = none or nitrile), that exhibit a strong yellow‐green RTP with quantum efficiencies up to 100% and short decay times (4.4–4.9 µs). The title cluster complexes display X‐ray scintillation properties with a record ultralow detection limit (18.1 nGy s−1) and a perfectly linear dose rate response within a remarkably wide dose rate window (0–640 µGyair s−1). The cluster [Cu4I4(Ph3As)3] is highlighted as an efficient phosphor for UV‐pumped white and yellow LED devices, demonstrating an excellent white spectrum with a CIE index of (0.32,0.33) and bright yellow emission, respectively. These results may stimulate the future efforts in designing highly efficient arsenic‐based RTP materials and enriching the Cu4I4 cluster family. [ABSTRACT FROM AUTHOR]

Singlet dioxygen has been widely applied in different disciplines such as medicine (photodynamic therapy or blood sterilization), remediation (wastewater treatment) or industrial processes (fine chemicals synthesis). Particularly, it can be conveniently generated by energy transfer between a photosensitizer's triplet state and triplet dioxygen upon irradiation with visible light. Among the best photosensitizers, substituted zinc(II) phthalocyanines are prominent due to their excellent photophysical properties, which can be tuned by structural modifications, such as halogen‐ and chalcogen‐atom substitution. These patterns allow for the enhancement of spin‐orbit coupling, commonly attributed to the heavy atom effect, which correlates with the atomic number (Z ${Z}$) and the spin‐orbit coupling constant (ζ ${\zeta }$) of the introduced heteroatom. Herein, a fully systematic analysis of the effect exerted by chalcogen atoms on the photophysical characteristics (absorption and fluorescence properties, lifetimes and singlet dioxygen photogeneration), involving 30 custom‐made β‐tetrasubstituted chalcogen‐bearing zinc(II) phthalocyanines is described and evaluated regarding the heavy atom effect. Besides, the intersystem crossing rate constants are estimated by several independent methods and a quantitative profile of the heavy atom is provided by using linear correlations between relative intersystem crossing rates and relative atomic numbers. Good linear trends for both intersystem crossing rates (S1‐T1 and T1‐S0) were obtained, with a dependency on the atomic number and the spin‐orbit coupling constant scaling as Z0.4 ${{Z}^{0.4}}$ and ζ0.2 ${{\zeta }^{0.2}}$ , respectively The trend shows to be independent of the solvent and temperature. [ABSTRACT FROM AUTHOR]

A novel second-generation blue fluorescent polyamidoamine dendrimer peripherally modified with sixteen 4-N,N-dimethylaninoethyloxy-1,8-naphthalimide units was synthesized. Its basic photophysical characteristics were investigated in organic solvents of different polarity. It was found that in these solvents, the dendrimer is colorless and emitted blue fluorescence with different intensities depending on their polarity. The effect of the pH of the medium on the fluorescence intensity was investigated and it was found that in the acidic medium, the fluorescence is intense and is quenched in the alkaline medium. The ability of the dendrimer to detect metal ions (Pb2+, Zn2+, Mg2+, Sn2+, Ba2+, Ni2+, Sn2+, Mn2+, Co2+, Fe3+, and Al3+) was also investigated, and it was found that in the presence of Fe3+, the fluorescent intensity was amplified more than 66 times. The antimicrobial activity of the new compound has been tested in vitro against Gram-positive B. cereus and Gram-negative P. aeruginosa. The tests were performed in the dark and after irradiation with visible light. The antimicrobial activity of the compound enhanced after light irradiation and B. cereus was found slightly more sensitive than P. aeruginosa. The increase in antimicrobial activity after light irradiation is due to the generation of singlet oxygen particles, which attack bacterial cell membranes. [ABSTRACT FROM AUTHOR]

Understanding hot carrier dynamics in semiconductor nanocrystals is an important research focus due to their applications in photonics and photovoltaic devices. In this report, we investigated the effects of surface‐bound exciton‐delocalizing ligands (EDLs) on the lifetimes of hot electrons in CdSe quantum dots (QDs). After treatment of CdSe with two different phenylithiocarbamates (PTCs), a class of EDLs, the depletion times of the band‐edge exciton bleach were roughly equivalent as observed through ultrafast transient absorption spectroscopy. However, following the initial ultrafast depletion, the PTC‐treated samples continued to deplete while the untreated CdSe began recovering. Inspection of other transient features – such as the 3rd exciton and hot biexciton – reveal a general trend in which the PTC‐treated samples relax more slowly at short times (<10 ps) when compared with the untreated CdSe. At longer delay times, in the range of nanoseconds, the CdSe+CF3OPTC loses nearly 80 % of its excited state populations, while the CdSe+MeOPTC loses only 20–40 %. We discuss the role that exciton delocalization plays in determining these observed rates as well as how they compare to previous studies. Kinetic differences between the two ligands are attributed to their electron donating/withdrawing abilities and coupling to the CdSe QD. Coherent vibrational wavepacket analysis supports this line of reasoning, showing increased coupling between the exciton and the longitudinal optical (LO) phonon due to increased Coulombic field strength around the hole and electron‐donating MeOPTC. These results indicate that electron‐rich PTCs are especially good candidates for use in QD devices that would make use of hot carriers. [ABSTRACT FROM AUTHOR]

Copolymerization provides an effective approach to tune the photophysical properties of non‐conventional luminescent polymers (NCLPs). In this study, the controlling of intrinsic emissions of polyacrylonitrile (PAN) copolymers is revealed by a delicate difference of secondary monomers. The introduction of methacrylate comonomers can induce a 70‐nm red‐shifting in the PL emission of copolymers compared with that of acrylate‐containing copolymers. The mechanism of such "copolymerization induced red‐shifting" in PAN copolymers is investigated. It is demonstrated that the presence of the α‐methyl group in the copolymers can enhance the chain rigidity and through‐space conjugation (TSC) of C≡N groups, resulting in the red‐shifting of emission. [ABSTRACT FROM AUTHOR]

The effects of backbone amine functionalization in three new homoleptic C^N^C type ruthenium(II) complexes bearing a tridentate bis‐imidazole‐2‐ylidene pyridine ligand framework are characterized and studied by single crystal diffraction, electrochemistry, optical spectroscopy and transient absorption spectroscopy in combination with ab initio DFT calculations. Functionalization by dimethylamine groups in 4‐position of the pyridine backbone significantly influences the properties of the complexes as revealed by comparison with the unfunctionalized references. As a result of the amine functionalization, a higher molar absorption coefficient of the MLCT bands, a decreased photoluminescence quantum yield at room temperature together with a shortened excited state lifetime but an improved photostability is observed. Introduction of electron donating and withdrawing groups at the NHC unit modifies the electronic and optical properties, such as the oxidation potential, absorption and emission properties, and the lifetimes of the excited states. [ABSTRACT FROM AUTHOR]

This work reports on a battery of coordination compounds featuring a versatile dianionic luminophore adopting three different coordination modes (mono, bi, and tridentate) while chelating Pd(II), Pt(II), Au(III), and Hg(II) centers. An in‐depth structural characterization of the ligand precursor (H2L) and six transition metal complexes ([HLPdCNtBu], [LPtCl], [LPtCNtBu], [LPtCNPhen], [HLHgCl], and [LAuCl]) is presented. The influence of the cations and coordination modes of the luminophore and co‐ligands on the photophysical properties (including photoluminescence quantum yields (ΦL), excited state lifetimes (τ), and average (non‐)radiative rate constants) are evaluated at various temperatures in different phases. Five complexes show interesting photophysical properties at room temperature (RT) in solution. Embedment in frozen glassy matrices at 77 K significantly boosts their luminescence by suppressing radiationless deactivation paths. Thus, the Pt(II)‐based compounds provide the highest efficiencies, with slight variations upon exchange of the ancillary ligand. In the case of [HLPdCNtBu], both ΦL and τ increase over 30‐fold as compared to RT. Furthermore, the Hg(II) complex achieves, for the first time in its class, a ΦL exceeding 60% and millisecond‐range lifetimes. This demonstrates that a judicious ligand design can pave the way toward versatile coordination compounds with tunable excited state properties. [ABSTRACT FROM AUTHOR]

In tetracene, the energies of the lowest singlet excited state and twice that of the lowest triplet excited state are similar, allowing both down‐conversion (i.e., singlet fission, SF) and up‐conversion (i.e., triplet‐triplet annihilation up‐conversion, TTA‐UC) processes. Through‐space and through‐bond contributions to the inter‐tetracene coupling in purposefully designed oligomers play a crucial role in determining which of the two processes dominates. In this work, the focus is exclusively on SF in newly synthesized oligo‐tetracenes linked by conjugated [2.2]paracyclophane (PCP) building blocks. By choosing different PCP substitution patterns and by varying the degree of substitution the inter‐tetracene couplings are addressed. An independent variable is connecting the tetracences to the PCP at different positions to alter the through‐bond and through‐space coupling of the resulting oligo‐tetracenes. The novel oligo‐tetracenes are investigated by means of steady‐state and time‐resolved absorption and fluorescence spectroscopies with respect to the initial events of SF, that is, the transformation of a singlet excited state into a correlated triplet pair state. Briefly, through‐space couplings are profoundly weaker than through‐bond couplings that enable the correlated triplet pair state formation. If interactions are through‐space, correlated triplet pair state formation is turned off, while it is turned on if through‐bond interactions are operative. [ABSTRACT FROM AUTHOR]

Ruthenium(II) complexes with chelating polypyridine ligands are among the most frequently investigated compounds in photophysics and photochemistry, owing to their favorable luminescence and photoredox properties. Equally good photoluminescence performance and attractive photocatalytic behavior is now achievable with isoelectronic molybdenum(0) complexes. The zero‐valent oxidation state of molybdenum is stabilized by carbonyl or isocyanide ligands, and metal‐to‐ligand charge transfer (MLCT) excited states analogous to those in ruthenium(II) complexes can be established. Microsecond MLCT excited‐state lifetimes and photoluminescence quantum yields up to 0.2 have been achieved in solution at room temperature, and the emission wavelength has become tunable over a large range. The molybdenum(0) complexes are stronger photoreductants than ruthenium(II) polypyridines and can therefore perform more challenging chemical reductions. The triplet nature of their luminescent MLCT states allows sensitization of photon upconversion via triplet‐triplet annihilation, to convert low‐energy input radiation into higher‐energy output fluorescence. This review summarizes the current state of the art concerning luminescent molybdenum(0) complexes and highlights their application potential. Molybdenum is roughly 140 times more abundant and far cheaper than ruthenium, hence this research is relevant in the greater context of finding more sustainable alternatives to using precious and rare transition metals in photophysics and photochemistry. [ABSTRACT FROM AUTHOR]

We have employed the highly accurate multistate complete active space second‐order perturbation theory (MS‐CASPT2) method to investigate the photoinduced excited state relaxation properties of one unnatural base, namely Z. Upon excitation to the S2 state of Z, the internal conversion to the S1 state would be dominant. From the S1 state, two intersystem crossing paths leading to the T2 and T1 states and one internal conversion path to the S0 state are possible. However, considering the large barrier to access the S1/S0 conical intersection and the strong spin‐orbit coupling between S1 and T2 states (>40 cm−1), the intersystem crossing to the triplet manifolds is predicted to be more preferred. Arriving at the T2 state, the internal conversion to the T1 state and the intersystem crossing back to the S1 state are both possible considering the S1/T2/T1 three‐state intersection near the T2 minimum. Upon arrival at the T1 state, the deactivation to S0 can be efficient after overcoming a small barrier to access T1/S0 crossing point, where the spin‐orbit coupling (SOC) is as large as 39.7 cm−1. Our present work not only provides in‐depth insights into the photoinduced process of unnatural base Z, but can also help the future design of novel unnatural bases with better photostability. [ABSTRACT FROM AUTHOR]

Sunscreens provide a frontline defense for our DNA against the damage caused by ultraviolet (UV) radiation. The active ingredients in topically applied sunscreens that provide this defense are UV filters, which preferentially absorb or reflect UV radiation before it penetrates the skin and interacts with photosensitive nucleic acids. However, there are concerns related to human and environmental toxicity of current UV filters, and consequently a shift toward nature‐inspired, particularly microbial, UV filters. In this paper, new physical insight is provided into the fundamental mechanisms of photoprotection in two synthetic analogs of mycosporine‐like amino acid‐type UV filters, demonstrating new methods of protection that are distinct from those of current commercial sunscreens, extending previous work in this area. Transient absorption measurements (both transient electronic absorption spectroscopy and transient vibrational absorption spectroscopy) are combined with steady‐state studies and high‐level computational results to aid our mapping of the experimentally derived lifetimes to real‐time photodynamic processes. The conclusions reached here pave the way toward developing new and more efficient biomimetic DNA photoprotectant materials. [ABSTRACT FROM AUTHOR]

Cumulenes are linear molecules consisting of consecutive double bonds linking chains of sp-hybridized carbon atoms. They have primarily been of interest for potential use as molecular wires or in other nanoscale electronic devices, but more recently, other applications such as catalysis or even light harvesting through singlet fission have been speculated. Despite the recent theoretical and experimental interest, the photoexcitation of cumulenes typically results in quenching on the picosecond timescale, and the exact quenching mechanism for even the simplest of [3]-cumulenes lacks a clear explanation. In this report, we perform transient absorption spectroscopy on a set of model [3]-cumulene derivatives in a wide range of environmental conditions to demonstrate that the planarization of phenyl groups ultimately quenches the excited state. By restricting this intramolecular motion, we increase the excited state lifetime by a few nanoseconds, strongly enhancing photoluminescence and demonstrating an approach to stabilize them for photochemical applications. [ABSTRACT FROM AUTHOR]

Abstract Two series with three Pt(II) complexes each (PtLPh‐n, PtLFpy‐n) bearing asymmetric tetradentate ligands as dianionic luminophores with variable alkyl chain lengths were synthesized. Hence, each ligand series is distinguished by one of its cyclometallating rings (phenyl vs. 2,6‐difluoropyrid‐3‐yl). Steady‐state and time‐resolved photoluminescence spectroscopic studies in diluted solutions at room temperature and in glassy matrices at 77 K show that the emissive state is mainly centered on the invariantly electron‐rich cyclometalated side while the second ring regulates the admixture of ligand‐centered and metal‐to‐ligand charge‐transfer character. Hence, the radiative rates can be controlled, as indicated by quantum‐mechanical calculations, which also explain the temperature‐dependent trend in the phosphorescence rate constants. Studies in condensed phases (single‐crystal X‐ray diffractometry, polarized optical microscopy, differential scanning calorimetry, steady‐state and time‐resolved photoluminescence micro(spectro)scopy) showed the development of a smectic A mesophase for the fluorinated species bearing the two longest alkyl chains. Nuclear magnetic resonance‐based studies on the thermodynamics of aggregation in solution confirm the marked enthalpic stabilization of aggregates mediated by the polar 2,6‐difluoropyrid‐3‐yl moiety (and to a lesser extent by dispersive forces between the alkyl chains). On the other hand, the negative entropy of aggregation is dominated by the restriction of degrees of freedom involving the peripheral alkyl moieties upon stacking, which becomes increasingly relevant for longer chains. All these factors control Pt···Pt coupling, a crucial interaction for the design of photofunctional mesogens based on Pt(II) complexes.

Fluorescent probes are a powerful tool for imaging amyloid β (Aβ) plaques, the hallmark of Alzheimer’s disease (AD). Herein, we report the synthesis and comprehensive characterization of 21 novel probes as well as their optical properties and binding affinities to Aβ fibrils. One of these dyes, 1Ae, exhibited several improvements over FDDNP, an established biomarker for Aβ- and Tau-aggregates. First, 1Ae had large Stokes shifts (138–213 nm) in various solvents, thereby reducing self-absorption. With a high quantum yield ratio (φ(dichloromethane/methanol) = 104), 1Ae also ensures minimal background emission in aqueous environments and high sensitivity. In addition, compound 1Ae exhibited low micromolar binding affinity to Aβ fibrils in vitro (Kd = 1.603 µM), while increasing fluorescence emission (106-fold) compared to emission in buffer alone. Importantly, the selective binding of 1Ae to Aβ1–42 fibrils was confirmed by an in cellulo assay, supported by ex vivo fluorescence microscopy of 1Ae on postmortem AD brain sections, allowing unequivocal identification of Aβ plaques. The intermolecular interactions of fluorophores with Aβ were elucidated by docking studies and molecular dynamics simulations. Density functional theory calculations revealed the unique photophysics of these rod-shaped fluorophores, with a twisted intramolecular charge transfer (TICT) excited state. These results provide valuable insights into the future application of such probes as potential diagnostic tools for AD in vitro and ex vivo such as determination of Aβ1–42 in cerebrospinal fluid or blood.

Cumulenes are linear molecules consisting of consecutive double bonds linking chains of sp-hybridized carbon atoms. They have primarily been of interest for potential use as molecular wires or in other nanoscale electronic devices, but more recently, other applications such as catalysis or even light harvesting through singlet fission have been speculated. Despite the recent theoretical and experimental interest, the photoexcitation of cumulenes typically results in quenching on the picosecond timescale, and the exact quenching mechanism for even the simplest of [3]-cumulenes lacks a clear explanation. In this report, we perform transient absorption spectroscopy on a set of model [3]-cumulene derivatives in a wide range of environmental conditions to demonstrate that the planarization of phenyl groups ultimately quenches the excited state. By restricting this intramolecular motion, we increase the excited state lifetime by a few nanoseconds, strongly enhancing photoluminescence and demonstrating an approach to stabilize them for photochemical applications.

The importance of indigo dyes is constantly increasing with the evolution of novel textile materials and photochromic material technologies. The aim of this review article is to provide a comprehensive overview of the development of photochromic indigo derivatives from the first report on the photochromic N,N'-diacetylindigo in 1954 until now. We begin with the list of historical milestones in the development of photochromic indigo derivatives. Further, we provide a brief description of the synthetic procedures utilised to obtain indigo and its derivatives, outline the structural peculiarities, photophysical and photochemical properties of indigo and proceed with the detailed discussion of the photochromic indigo derivatives. Finally, we highlight the photochromism of the structural isomers of indigo (isoindigo and indirubin) and provide an overview of prospective applications of indigo photoswitches.