Search

Charges in lipid head groups generate electrical surface potentials at cell membranes, and changes in their composition are involved in various signaling pathways, such as T-cell activation or apoptosis. Here, we present a DNA origami-based sensor for membrane surface charges with a quantitative fluorescence read-out of single molecules. A DNA origami plate is equipped with modifications for specific membrane targeting, surface immobilization, and an anionic sensing unit consisting of single-stranded DNA and the dye ATTO542. This unit is anchored to a lipid membrane by the dye ATTO647N, and conformational changes of the sensing unit in response to surface charges are read out by fluorescence resonance energy transfer between the two dyes. We test the performance of our sensor with single-molecule fluorescence microscopy by exposing it to differently charged large unilamellar vesicles. We achieve a change in energy transfer of ∼10% points between uncharged and highly charged membranes and demonstrate a quantitative relation between the surface charge and the energy transfer. Further, with autocorrelation analyses of confocal data, we unravel the working principle of our sensor that is switching dynamically between a membrane-bound state and an unbound state on the timescale of 1-10 ms. Our study introduces a complementary sensing system for membrane surface charges to previously published genetically encoded sensors. Additionally, the single-molecule read-out enables investigations of lipid membranes on the nanoscale with a high spatial resolution circumventing ensemble averaging.

A rectangular DNA origami structure is one of the most studied and often used motif for applications in DNA nanotechnology. Here, we present two assays to study structural changes in DNA nanostructures and reveal a reversible rolling-up of the rectangular DNA origami structure induced by bivalent cations such as magnesium or calcium. First, we applied one-color and two-color superresolution DNA-PAINT with protruding strands along the long edges of the DNA origami rectangle. At increasing salt concentration, a single line instead of two lines is observed as a first indicator of rolling-up. Two-color measurements also revealed different conformations with parallel and angled edges. Second, we placed a gold nanoparticle and a dye molecule at different positions on the DNA origami structure. Distance dependent fluorescence quenching by the nanoparticle reports on dynamic transitions as well as it provides evidence that the rolling-up occurs preferentially along the diagonal of the DNA origami rectangle. The results will be helpful to test DNA structural models and the assays presented will be useful to study further structural transitions in DNA nanotechnology.

SummarySingle-molecule FRET (smFRET) is widely used to investigate dynamic (bio) molecular interactions taking place over distances of up to 10 nm. With the advent of recent super-resolution methods such as MINFLUX, MINSTED or RASTMIN, the spatiotemporal resolution of these techniques advanced towards the smFRET regime. While these methods do not suffer from the spatial restriction of FRET, they only visualize one emitter at a time, thus rendering fast dynamics of interactions out of reach. Here, we describe two approaches to overcome this limitation in pMINFLUX using its intrinsic fluorescence lifetime information. First, we combined pMINFLUX with smFRET. This enabled us to track a FRET donor fluorophore and simultaneously colocalize its FRET acceptor with nanometer precision. To extend co-localized tracking beyond the FRET range, we developed pMINFLUX lifetime multiplexing, a method to simultaneously track two fluorophores with similar spectral properties but distinct fluorescence lifetimes. We demonstrated its application on both static and dynamic DNA origami systems with a precision better than 2 nm. Within the FRET range, pMINFLUX lifetime multiplexing additionally uses a novel combined phasor-microtimegating approach. This paves the way for nanometer precise co-localized tracking for inter-dye distances between 4 nm and 100 nm, closing the resolution gap between smFRET and co-tracking.Graphical Abstract

Single-molecule experiments have changed the way we investigate the physical world but data analysis is typically time-consuming and prone to human bias. Here, we present Deep-LASI (Deep-Learning Assisted Single-molecule Imaging analysis), a software package consisting of an ensemble of deep neural networks to rapidly analyze single-, two- and three-color single-molecule data, in particular from single-molecule Förster Resonance Energy Transfer (FRET) experiments. Deep-LASI automatically sorts single molecule traces, determines FRET correction factors and classifies the state transitions of dynamic traces, all in ~20-100 ms per trajectory. We thoroughly benchmarked Deep-LASI using ground truth simulations as well as experimental data analyzed manually by an expert user and compared the results with a conventional Hidden Markov Model analysis. We illustrate the capabilities of the technique using a highly tunable L-shaped DNA origami structure and use Deep-LASI to perform titrations, analyze protein conformational dynamics and demonstrate its versatility for analyzing both total internal reflection fluorescence microscopy and confocal smFRET data.

Single-molecule experiments have changed the way we investigate the physical world but data analysis is typically time-consuming and prone to human bias. Here, we present Deep-LASI (Deep-Learning Assisted Single-molecule Imaging analysis), a software package consisting of an ensemble of deep neural networks to rapidly analyze single-, two- and three-color single-molecule data, in particular from single-molecule Förster Resonance Energy Transfer (FRET) experiments. Deep-LASI automatically sorts single molecule traces, determines FRET correction factors and classifies the state transitions of dynamic traces, all in ~20-100 ms per trajectory. We thoroughly benchmarked Deep-LASI using ground truth simulations as well as experimental data analyzed manually by an expert user and compared the results with a conventional Hidden Markov Model analysis. We illustrate the capabilities of the technique using a highly tunable L-shaped DNA origami structure and use Deep-LASI to perform titrations, analyze protein conformational dynamics and demonstrate its versatility for analyzing both total internal reflection fluorescence microscopy and confocal smFRET data.

Fluorescence correlation spectroscopy is a versatile tool for studying fast conformational changes of biomolecules especially when combined with Förster resonance energy transfer (FRET). Despite the many methods available for identifying structural dynamics in FRET experiments, the determination of the forward and backward transition rate constants and thereby also the equilibrium constant is difficult when two intensity levels are involved. Here, we combine intensity correlation analysis with fluorescence lifetime information by including only a subset of photons in the autocorrelation analysis based on their arrival time with respect to the excitation pulse (microtime). By fitting the correlation amplitude as a function of microtime gate, the transition rate constants from two fluorescence-intensity level systems and the corresponding equilibrium constants are obtained. This shrinking-gate fluorescence correlation spectroscopy (sg-FCS) approach is demonstrated using simulations and with a DNA origami-based model system in experiments on immobilized and freely diffusing molecules. We further show that sg-FCS can distinguish photophysics from dynamic intensity changes even if a dark quencher, in this case graphene, is involved. Finally, we unravel the mechanism of a FRET-based membrane charge sensor indicating the broad potential of the method. With sg-FCS, we present an algorithm that does not require prior knowledge and is therefore easily implemented when an autocorrelation analysis is carried out on time-correlated single-photon data.

A single chromophore can only emit a maximum of one single photon per excitation cycle. This limitation results in a phenomenon commonly referred to as photon antibunching (pAB). When multiple chromophores contribute to the fluorescence measured, the degree of pAB has been used as a metric to "count" the number of chromophores. But the fact that chromophores can switch randomly between bright and dark states also impacts pAB and can lead to incorrect chromophore numbers being determined from pAB measurements. By both simulations and experiment, we demonstrate how pAB is affected by independent and collective chromophore blinking, enabling us to formulate universal guidelines for correct interpretation of pAB measurements. We use DNA-origami nanostructures to design multichromophoric model systems that exhibit either independent or collective chromophore blinking. Two approaches are presented that can distinguish experimentally between these two blinking mechanisms. The first one utilizes the different excitation intensity dependence on the blinking mechanisms. The second approach exploits the fact that collective blinking implies energy transfer to a quenching moiety, which is a time-dependent process. In pulsed-excitation experiments, the degree of collective blinking can therefore be altered by time gating the fluorescence photon stream, enabling us to extract the energy-transfer rate to a quencher. The ability to distinguish between different blinking mechanisms is valuable in materials science, such as for multichromophoric nanoparticles like conjugated-polymer chains as well as in biophysics, for example, for quantitative analysis of protein assemblies by counting chromophores.

The design of simple and versatile synthetic routes to accomplish triggered-release properties in carriers is of particular interest for drug delivery purposes. In this context, the programmability and adaptability of DNA nanoarchitectures in combination with liposomes have great potential to render biocompatible hybrid carriers for triggered cargo release. We present an approach to form a DNA mesh on large unilamellar liposomes incorporating a stimuli-responsive DNA building block. Upon incubation with a single-stranded DNA trigger sequence, a hairpin closes, and the DNA building block is allowed to self-contract. We demonstrate the actuation of this building block by single-molecule Förster resonance energy transfer (FRET), fluorescence recovery after photobleaching, and fluorescence quenching measurements. By triggering this process, we demonstrate the elevated release of the dye calcein from the DNA–liposome hybrid carriers. Interestingly, the incubation of the doxorubicin-laden active hybrid carrier with HEK293T cells suggests increased cytotoxicity relative to a control carrier without the triggered-release mechanism. In the future, the trigger could be provided by peritumoral nucleic acid sequences and lead to site-selective release of encapsulated chemotherapeutics., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013) through the ERC grant PhysProt (Agreement No. 337969). K.N.B., P.S.C., and T.P.J.K. are grateful for financial support from the Biotechnology and Biological Sciences Research Council (BBSRC), the Newman Foundation, the Wellcome Trust, and the Cambridge Centre for Misfolding Diseases. D.M. is supported by the Winton Programme for the Physics of Sustainability, as well as the Engineering and Physical Sciences Research Council (EPSRC). P.T. gratefully acknowledges funding by the Bavarian Ministry of Science and the Arts through the ONE MUNICH Project “Munich Multiscale Biofabrication” and by the LMU-Cambridge strategic partnership. S.H.A. acknowledges funding by the Gobierno de Aragón-FSE (Research Group E47_20R).

DNA processing enzymes, such as DNA polymerases and endonucleases, have found many applications in biotechnology, molecular diagnostics, and synthetic biology, among others. The development of enzymes with controllable activity, such as hot-start or light-activatable versions, has boosted their applications and improved the sensitivity and specificity of the existing ones. However, current approaches to produce controllable enzymes are experimentally demanding to develop and case specific. Here, we introduce a simple and general method to design light-start DNA processing enzymes. In order to prove its versatility, we applied our method to three DNA polymerases commonly used in biotechnology, including the Phi29 (mesophilic), Taq and Pfu polymerases, and one restriction enzyme. Light-start enzymes showed suppressed polymerase, exonuclease and endonuclease activity until they were re-activated by an UV pulse. Finally, we applied our enzymes to common molecular biology assays, and showed comparable performance to commercial hot-start enzymes.

Signal transmission in neurons goes along with changes in the transmembrane potential. To report them, different approaches including optical voltage-sensing dyes and genetically encoded voltage indicators have evolved. Here, we present a DNA nanotechnology-based system. Using DNA origami, we incorporate and optimize different properties such as membrane targeting and voltage sensing modularly. As a sensing unit, we use a hydrophobic red dye anchored to the membrane and an anionic green dye at the DNA connecting the DNA origami and the membrane dye anchor. Voltage-induced displacement of the anionic donor unit is read out by changes of Fluorescence Resonance Energy Transfer (FRET) of single sensors attached to liposomes. They show a FRET change of ∼5% for ΔΨ=100 mV and allow adapting the potential range of highest sensitivity. Further, the working mechanism is rationalized by molecular dynamics simulations. Our approach holds potential for the application as non-genetically encoded sensors at membranes.

Despite the thorough investigation of graphene since 2004, altering its surface chemistry and reproducible functionalization remain challenging. This hinders fabrication of more complex hybrid materials with controlled architectures, and as a consequence the development of sensitive and reliable sensors and biological assays. In this contribution, we introduce DNA origami structures as nanopositioners for placing single dye molecules at controlled distances from graphene. The measurements of fluorescence intensity and lifetime of single emitters carried out for distances ranging from 3 to 58 nm confirmed the d–4 dependence of the excitation energy transfer to graphene. Moreover, we determined the characteristic distance for 50% efficiency of the energy transfer from single dyes to graphene to be 17.7 nm. Using pyrene molecules as a glue to immobilize DNA origami nanostructures of various shape on graphene opens new possibilities to develop graphene-based biophysics and biosensing.

Cyanine dyes are exceptionally useful probes for a range of fluorescence-based applications. We recently demonstrated that appending a ring system to the pentamethine cyanine ring system improves the quantum yield and extends the fluorescence lifetime. Here, we report an optimized synthesis of persulfonated variants that enable efficient labeling of nucleic acids and proteins. We demonstrate that a bifunctional sulfonated tertiary amide significantly improves the optical properties of the resulting bioconjugates. These new conformationally restricted cyanines are compared to parent species in a range of contexts including their use on a DNA-nano-antenna, in single-molecule Förster resonance energy transfer (FRET) applications, far-red fluorescence lifetime imaging microscopy (FLIM), and single-molecule localization microscopy. These efforts define contexts in which eliminating cyanine isomerization provides meaningful benefits to imaging performance.

Graphene exhibits outstanding fluorescence quenching properties that can become useful for biophysics and biosensing applications, but it remains challenging to harness these advantages due to the complex transfer procedure of chemical vapor deposition-grown graphene to glass coverslips and the low yield of usable samples. Here, we screen 10 graphene-on-glass preparation methods and present an optimized protocol. To obtain the required quality for single-molecule and super-resolution imaging on graphene, we introduce a graphene screening method that avoids consuming the investigated sample. We apply DNA origami nanostructures to place fluorescent probes at a defined distance on top of graphene-on-glass coverslips. Subsequent fluorescence lifetime imaging directly reports on the graphene quality, as deviations from the expected fluorescence lifetime indicate imperfections. We compare the DNA origami probes with conventional techniques for graphene characterization, including light microscopy, atomic force microscopy, and Raman spectroscopy. For the latter, we observe a discrepancy between the graphene quality implied by Raman spectra in comparison to the quality probed by fluorescence lifetime quenching measured at the same position. We attribute this discrepancy to the difference in the effective area that is probed by Raman spectroscopy and fluorescence quenching. Moreover, we demonstrate the applicability of already screened and positively evaluated graphene for studying single-molecule conformational dynamics on a second DNA origami structure. Our results constitute the basis for graphene-based biophysics and super-resolution microscopy.

We present a technique to determine the orientation of single fluorophores attached to DNA origami structures based on two measurements. First, the orientation of the absorption transition dipole of the molecule is determined through a polarization-resolved excitation measurement. Second, the orientation of the DNA origami structure is obtained from a DNA-PAINT nanoscopy measurement. Both measurements are performed consecutively on a fluorescence wide-field microscope. We employed this approach to study the orientation of single ATTO 647N, ATTO 643, and Cy5 fluorophores covalently attached to a 2D rectangular DNA origami structure with different nanoenvironments, achieved by changing both the fluorophores' binding position and immediate vicinity. Our results show that when fluorophores are incorporated with additional space, for example, by omitting nucleotides in an elsewise double-stranded environment, they tend to stick to the DNA and to adopt a preferred orientation that depends more on the specific molecular environment than on the fluorophore type. With the aid of all-atom molecular dynamics simulations, we rationalized our observations and provide insight into the fluorophores' probable binding modes. We believe this work constitutes an important step toward manipulating the orientation of single fluorophores in DNA origami structures, which is vital for the development of more efficient and reproducible self-assembled nanophotonic devices.

Forster resonance energy transfer (FRET) imaging methods provide unique insight into the spatial distribution of energy transfer and (bio)molecular interaction events, though they deliver average information for an ensemble of events included in a diffraction-limited volume. Coupling super-resolution fluorescence microscopy and FRET has been a challenging and elusive task. Here, we present STED-FRET, a method of general applicability to obtain super-resolved energy transfer images. In addition to higher spatial resolution, STED-FRET provides a more accurate quantification of interaction and has the capacity of suppressing contributions of noninteracting partners, which are otherwise masked by averaging in conventional imaging. The method capabilities were first demonstrated on DNA-origami model systems, verified on uniformly double-labeled microtubules, and then utilized to image biomolecular interactions in the membrane-associated periodic skeleton (MPS) of neurons.

The particle-like nature of light becomes evident in the photon statistics of fluorescence from single quantum systems as photon antibunching. In multichromophoric systems, exciton diffusion and subsequent annihilation occurs. These processes also yield photon antibunching but cannot be interpreted reliably. Here we develop picosecond time-resolved antibunching to identify and decode such processes. We use this method to measure the true number of chromophores on well-defined multichromophoric DNA-origami structures, and precisely determine the distance-dependent rates of annihilation between excitons. Further, this allows us to measure exciton diffusion in mesoscopic H- and J-type conjugated-polymer aggregates. We distinguish between one-dimensional intra-chain and three-dimensional inter-chain exciton diffusion at different times after excitation and determine the disorder-dependent diffusion lengths. Our method provides a powerful lens through which excitons can be studied at the single-particle level, enabling the rational design of improved excitonic probes such as ultra-bright fluorescent nanoparticles and materials for optoelectronic devices., Photon antibunching typically measures the time-averaged photophysics of multichromophoric nanoparticles. Here, the authors report on time-resolving photon antibunching, allowing the true number of chromophores and exciton diffusion to be measured in DNA origami and conjugated polymer aggregates.

Summary: DNA nanotechnology offers new biosensing approaches by templating different sensor and transducer components. Here, we combine DNA origami nanoantennas with label-free antibody detection by incorporating a nanoswitch in the plasmonic hotspot of the nanoantenna. The nanoswitch contains two antigens that are displaced by antibody binding, thereby eliciting a fluorescent signal. Single-antibody detection is demonstrated with a DNA origami integrated anti-digoxigenin antibody nanoswitch. In combination with the nanoantenna, the signal generated by the antibody is additionally amplified. This allows the detection of single antibodies on a portable smartphone microscope. Overall, fluorescence-enhanced antibody detection in DNA origami nanoantennas shows that fluorescence-enhanced biosensing can be expanded beyond the scope of the nucleic acids realm.

We introduce p-MINFLUX, a new implementation of the highly photon-efficient single-molecule localization method with a simplified experimental setup and additional fluorescence lifetime information. In contrast to the original MINFLUX implementation, p-MINFLUX uses interleaved laser pulses to deliver the doughnut-shaped excitation foci at a maximum repetition rate. Using both static and dynamic DNA origami model systems, we demonstrate the performance of p-MINFLUX for single-molecule localization nanoscopy and tracking, respectively. p-MINFLUX delivers 1-2 nm localization precision with 2000-1000 photon counts. In addition, p-MINFLUX gives access to the fluorescence lifetime enabling multiplexing and super-resolved lifetime imaging. p-MINFLUX should help to unlock the full potential of innovative single-molecule localization schemes. Fil: Masullo, Luciano Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Centro de Investigaciones en Bionanociencias "Elizabeth Jares Erijman"; Argentina Fil: Steiner, Florian. Ludwig Maximilians Universitat; Alemania Fil: Zähringer, Jonas. Ludwig Maximilians Universitat; Alemania Fil: Lopez, Lucía Fernanda. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Centro de Investigaciones en Bionanociencias "Elizabeth Jares Erijman"; Argentina Fil: Bohlen, Johann. Ludwig Maximilians Universitat; Alemania Fil: Richter, Lars. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Centro de Investigaciones en Bionanociencias "Elizabeth Jares Erijman"; Argentina Fil: Cole, Fiona. Ludwig Maximilians Universitat; Alemania Fil: Tinnefeld, Philip. Ludwig Maximilians Universitat; Alemania Fil: Stefani, Fernando Daniel. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Centro de Investigaciones en Bionanociencias "Elizabeth Jares Erijman"; Argentina

DNA nanotechnology and advances in the DNA origami technique have enabled facile design and synthesis of complex and functional nanostructures. Molecular devices are, however, prone to rapid functional and structural degradation due to the high proportion of surface atoms at the nanoscale and due to complex working environments. Besides stabilizing mechanisms, approaches for the self‐repair of functional molecular devices are desirable. Here we exploit the self‐assembly and reconfigurability of DNA origami nanostructures to induce the self‐repair of defects of photoinduced and enzymatic damage. We provide examples of repair in DNA nanostructures showing the difference between unspecific self‐regeneration and damage specific self‐healing mechanisms. Using DNA origami nanorulers studied by atomic force and superresolution DNA PAINT microscopy, quantitative preservation of fluorescence properties is demonstrated with direct potential for improving nanoscale calibration samples., Self‐assembly and reconfigurability of DNA origami is exploited to realize self‐repairing functional nanodevices. A self‐regenerating brightness label is realized by constant exchange of labeling strands from solution. Structural self‐healing of a DNA origami nanoruler is achieved by excess of staple strands that exchange with enzymatically or photo‐induced damaged strands.

Bacterial colonization of the human intestine requires firm adhesion of bacteria to insoluble substrates under hydrodynamic flow. Here we report the molecular mechanism behind an ultrastable protein complex responsible for resisting shear forces and adhering bacteria to cellulose fibers in the human gut. Using single-molecule force spectroscopy (SMFS), single-molecule FRET (smFRET), and molecular dynamics (MD) simulations, we resolve two binding modes and three unbinding reaction pathways of a mechanically ultrastable R. champanellensis (Rc) Dockerin:Cohesin (Doc:Coh) complex. The complex assembles in two discrete binding modes with significantly different mechanical properties, with one breaking at ~500 pN and the other at ~200 pN at loading rates from 1-100 nN s−1. A neighboring X-module domain allosterically regulates the binding interaction and inhibits one of the low-force pathways at high loading rates, giving rise to a catch bonding mechanism that manifests under force ramp protocols. Multi-state Monte Carlo simulations show strong agreement with experimental results, validating the proposed kinetic scheme. These results explain mechanistically how gut microbes regulate cell adhesion strength at high shear stress through intricate molecular mechanisms including dual-binding modes, mechanical allostery and catch bonds., Nature Communications, 11 (1), ISSN:2041-1723

Photobleaching is an effect terminating the photon output of fluorophores, limiting the duration of fluorescence-based experiments. Plasmonic nanoparticles (NPs) can increase the overall fluorophore photostability through an enhancement of the radiative rate. In this work, we use the DNA origami technique to arrange a single fluorophore in the 12-nm gap of a silver NP dimer and study the number of emitted photons at the single molecule level. Our findings yielded a 30× enhancement in the average number of photons emitted before photobleaching. Numerical simulations are employed to rationalize our results. They reveal the effect of silver oxidation on decreasing the radiative rate enhancement., We acknowledge funding by a starting grant (SiMBA, EU 261162) of the European Research Council (ERC) and the Deutsche Forschungsgesellschaft (AC 279/2-1 and TI 329/9-1). IK is grateful for the support by the Mobility Plus grant 1269/MOB/IV/2015/0 from the Polish Ministry of Science and Higher Education (MNiSW). CV thanks a scholarship of the Studienstiftung des deutschen Volkes. AIF-D and AC-G acknowledge funding from the Spanish MINECO under Contracts FIS2015- 64951-R and MDM-2014-0377-16-4, respectively. AIF-D also acknowledges funding from EU Seventh Framework Programme under Grant Agreement FP7-PEOPLE- 2013-CIG-630996. GA and PT acknowledge funding of the state ministry for research of lower saxony in the frame of the “Quantum- and Nanometrology” (QUANOMET) strategic research area. Quanomet is part of the LUH-TUBS research alliance

In recent years, DNA origami nanorulers for superresolution (SR) fluorescence microscopy have been developed from fundamental proof-of-principle experiments to commercially available test structures. The self-assembled nanostructures allow placing a defined number of fluorescent dye molecules in defined geometries in the nanometer range. Besides the unprecedented control over matter on the nanoscale, robust DNA origami nanorulers are reproducibly obtained in high yields. The distances between their fluorescent marks can be easily analysed yielding intermark distance histograms from many identical structures. Thus, DNA origami nanorulers have become excellent reference and training structures for superresolution microscopy. In this work, we go one step further and develop a calibration process for the measured distances between the fluorescent marks on DNA origami nanorulers. The superresolution technique DNA-PAINT is used to achieve nanometrological traceability of nanoruler distances following the guide to the expression of uncertainty in measurement (GUM). We further show two examples how these nanorulers are used to evaluate the performance of TIRF microscopes that are capable of single-molecule localization microscopy (SMLM).