Search

Cognition maintenance is essential for healthy and safe life if sleep deprivation happens. Armodafinil is a wake-promoting agent against sleep deprivation related disorders. However, only the tablet formulation is available, which may limit its potential in some circumstances. Here, we report the synthesis of a new formulation of armodafinil, microneedle patches, which can be conveniently used by any individual and removed in time if not wanted. To produce the needles of higher mechanical strength and higher drug loading, polyvinylpyrrolidone (PVP) K90 was used to fabricate armodafinil-loaded microneedles by applying the mold casting method after dissolving in methanol and drying. The higher mechanical strength was validated by COMSOL Multiphysics® software stimulation and universal mechanical testing machines. The obtained armodafinil microneedles can withstand a force of 70 N and penetrate the skin to a depth of 230 μm, and quickly released the drug within 1.5 h in vitro. The pharmacokinetic analysis showed that microneedle administration can maintain a more lasting and stable blood concentration as compared to oral administration. After the treatment of sleep deprived mice with microneedles, the in vivo pharmacodynamics study clearly demonstrated that armodafinil microneedles could eliminate the effects of sleep deprivation and improve the cognitive functions of sleep-deprived mice. A self-administered, high drug-loaded microneedle patch were prepared successfully, which appeared to be highly promising in preserving cognition by transdermal administration.

Silver nanoparticles (AgNPs) have become widespread in the environment with increasing industrial applications. But the studies about their potential health risks are far from enough, especially in neurotoxic effects. This study aimed to investigate the neurotoxic effects of longer-term exposure (prolonged exposure for 48 h and chronic exposure for 6 days) of 20nm AgNPs with/without polyvinylpyrrolidone (PVP) coating at low concentrations (0.01-10 mg·L-1 ) to Caenorhabditis elegans. The results suggested that exposure to AgNPs induced damage to nematode survival, with the longest and relative average life span reduced. Exposure to AgNPs caused neurotoxicity on locomotion behaviors (head thrashes, body bends, pharyngeal pumping frequency, and defecation interval) and sensory perception behaviors (chemotaxis assay and thermotaxis assay), as well as impaired dopaminergic, GABAergic, and cholinergic neurons, except for glutamatergic, based on the alters fluorescence intensity, in a dose- and time-dependent manner. Further investigations suggested that the low-dose AgNPs (0.01-0.1 mg·L-1 ) exposure raises receptors of GABAergic and dopamine in C. elegans at the genetic level, whereas opposite results were observed at higher doses (1-10 mg·L-1 ), which implied that AgNPs could cause neurotoxicity by impairing neurotransmitter delivery. The PVP-AgNPs could cause a higher fatality rate and neurotoxicity at the same dose. Notably, AgNPs did not cause any deleterious effect on nematodes at the lowest dose of 0.01 mg·L-1 . In general, these results suggested that AgNPs possess the neurotoxic potential in C. elegans and provided useful information to understand the neurotoxicity of AgNPs, which would offer an inspiring perspective on the safe application.

The intravenous administration of drug-loaded nanoparticles (NPs) is needed to achieve passive or active targeting in disease tissues. However, when the loaded drug is a hydrophobic small molecule, the NPs fail to reach adequate plasma drug concentrations mainly because of premature drug release. The pharmacokinetics of such drugs can be controlled by covalent modification, but this approach could compromise the safety or potency of the drug. In this study, we investigated two formulation parameters that could be used to improve the plasma concentrations of unmodified drugs that are loaded in a nanoemulsion (NE), a core-shell type NP. The first parameter is the loading ratio, and the second is the affinity of the drug to the core. Optimized NEs with reduced drug loading and with a high drug-core affinity resulted in a 12.4- and 11.2-fold increase in the plasma retention of curcumin and paclitaxel, respectively. Our strategy for enhancing the drug-core interaction affinity relied on mixing oils and surfactants to achieve cooperativity in noncovalent interactions, such as hydrophobic interactions, hydrogen bonding, and π-π stacking, which was further confirmed by theoretical calculations of interaction affinities. Finally, we report on the development of a cinnamic acid-derived oil-like material as a novel drug vehicle with exceptional solubilizing ability that could be used in intravenous formulations of NEs.

Purpose: To present a patient with bilateral conjunctivitis, testing positive for viral RNA of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in both nasopharyngeal and conjunctival samples. Methods: A 40-year-old man with bilateral acute conjunctivitis and suspicious signs of coronavirus disease 2019 (COVID-19) presented to the hospital. A detailed ophthalmic examination was performed. Samples obtained from conjunctival and nasopharyngeal swabs were tested by reverse transcription PCR (RT-PCR) for the detection of SARS-CoV-2 virus. Ocular findings and duration of the presence of viral RNA in the conjunctival specimens were evaluated at follow-up visits. Results: Slit-lamp biomicroscopy revealed bilateral acute follicular conjunctivitis. The RT-PCR assay demonstrated the presence of viral RNA in the nasopharyngeal and conjunctival specimens at the initial visit and at the 4-day follow-up. Conjunctivitis findings were decreased after 4 days and recovered completely without any sequelae within10 days. The PCR results of both nasopharyngeal and conjunctiva specimens were negative for the viral RNA at 10 days. Conclusions: Bilateral conjunctivitis is rare in patients infected with COVID-19. Although it is difficult to detect viral RNA from conjunctival swabs, conjunctival secretions may be a source of contamination, and protective measures must be taken.

Improving drug bioavailability in the pharmaceutical field is a challenge that has attracted substantial interest worldwide. The controlled release of a drug can be achieved with a variety of strategies and novel materials in the field. In addition to the vast development of innovative materials for improving therapeutic effects and reducing side effects, the exploration of remarkable existing materials could encourage the discovery of diverse approaches for adapted drug delivery systems. Recently, superdisintegrants have been proposed for drug delivery systems as alternative approaches to maximize the efficiency of therapy. Although superdisintegrants are well known and used in solid dosage forms, studies on strategies for the development of drug delivery systems using superdisintegrants are lacking. Therefore, this study reviews the use of superdisintegrants in controlled drug release dosage formulations. This overview of superdisintegrants covers developed strategies, types (including synthetic and natural materials), dosage forms and techniques and will help to improve drug delivery systems.

AIM: Canagliflozin (CFZ), a novel SGLT II antagonist, exhibits erratic absorption after oral administration. The current study entails development and evaluation of spray dried lipid based formulation (solid SMEDDS) for enhancing oral bioavailability and anti-diabetic activity of CFZ. METHODS: Solid SMEDDS developed through spray drying containing Neusilin US2 as an adsorbent. The formed solid SMEDDS were characterized for physicochemical and solid state attributes. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to confirm the spherical morphology. In vitro dissolution, ex vivo permeability and in vivo pharmacokinetic studies were conducted to determine the release rate, permeation rate and absorption profile of CFZ, respectively. Pharmacodynamic studies were done as per standard protocols. RESULTS: The optimized solid SMEDDS exhibited acceptable practical yield and flow properties and is vouched with enhanced amorphization, nanoparticulate distribution and acceptable drug content. The spherical morphology of solid SMEDDS and reconstituted SMEDDS were confirmed in SEM and TEM, respectively. In vitro dissolution studies revealed multi-fold release behavior in CFZ in various dissolution media, whereas, remarkable permeability was observed in jejunum segment of rat intestine. Pharmacokinetic studies of CFZ in solid SMEDDS demonstrated 2.53 and 1.43 fold enhancement in C(max) and 2.73 and 1.98 fold in AUC (0-24h), as compared to pure API and marketed formulation, respectively. Pharmacological evaluation of solid SMEDDS revealed enhanced anti-diabetic activity of CFZ through predominant SGLT II inhibition in rats, as evident from evaluation of biochemical levels, urinary glucose excretion studies and SGLT II expression analysis. CONCLUSION: The current work describes significant improvement biopharmaceutical properties of CFZ in solid SMEDD formulation. [Figure: see text] ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s40199-020-00330-3) contains supplementary material, which is available to authorized users.

In order for preparing a solid oral dosage form, tablet quality is of significant concern. Compressibility behavior of different powders and mixtures of formulations and release pattern of any tablets are characteristic measures to define prerequisite quality attributes of any compressed formulations. There are basically two major methods that can be adopted for the preparation of tablets including granulation and direct compression. Later process offer fewer processing steps and agreeable release profile with acceptable quality parameters and hence preferred over granulation method. In this investigation Mebeverine hydrochloride an anti-muscarinic drug is studied for compression and release behavior using various concentrations of filler binders and disintegrants via rotatable central composite design (CCRD) option of design expert (software). Nine formulations were developed from F1 to F9 with Crospovidone (superdisintegrant) as (X

Background: No previous studies exist examining 2 inhaled epoprostenol formulations in an acute respiratory distress syndrome (ARDS) patient population. Objective: The study aim was to evaluate a formulary conversion from inhaled Flolan to Veletri to determine the impact on effectiveness, safety, and cost in patients with ARDS. Methods: This was a single-center, retrospective, matched cohort observational study at a tertiary care academic medical center. Patients included were mechanically ventilated, adult patients with ARDS receiving inhaled Flolan or Veletri for ≥1 hour in the intensive care unit. Results: A total of 132 patients were included in the matched cohort. There was no difference detected in change in partial pressure of arterial O2/fraction of inspired O2(PaO2/FiO2) ratio after 1 hour of therapy between the inhaled Flolan and Veletri groups (27.2 ± 46.2 vs 30 ± 68 mm Hg, P = 0.78). Significant differences in secondary outcomes included incidence of hypotension (83% vs 95.5%, P = 0.04) and thrombocytopenia (9.1% vs 29.5%, P < 0.01) in the inhaled Flolan and Veletri groups, respectively, with no difference in cost per duration of therapy ( P = 0.29). Conclusions and Relevance: There was no difference in the change in PaO2/FiO2ratio after 1 hour of therapy between inhaled Flolan and Veletri in an ARDS patient population. The formulary conversion from inhaled Flolan to Veletri was likely justified.

Skin penetration/permeation enhancers are compounds that improve (trans)dermal drug delivery. We designed hybrid terpene-amino acid enhancers by conjugating natural terpenes (citronellol, geraniol, nerol, farnesol, linalool, perillyl alcohol, menthol, borneol, carveol) or cinnamyl alcohol with 6-(dimethylamino)hexanoic acid through a biodegradable ester linker. The compounds were screened for their ability to increase the delivery of theophylline and hydrocortisone through and into human skin ex vivo. The citronellyl, bornyl and cinnamyl esters showed exceptional permeation-enhancing properties (enhancement ratios up to 82) while having low cellular toxicities. The barrier function of enhancer-treated skin (assessed by transepidermal water loss and electrical impedance) recovered within 24 h. Infrared spectroscopy suggested that these esters fluidized the stratum corneum lipids. Furthermore, the citronellyl ester increased the epidermal concentration of topically applied cidofovir, which is a potent antiviral and anticancer drug, by 15-fold. In conclusion, citronellyl 6-(dimethylamino)hexanoate is an outstanding enhancer with an advantageous combination of properties, which may improve the delivery of drugs that have a limited ability to cross biological barriers.

Taste is a crucial factor that determines the palatability of the oral dosage form and patient compliance. Objective The aim of this work was to evaluate the organoleptic excipients in oral antibiotics for pediatric use marketed in Brazil. Methods The information was obtained from the Guide to Pharmacy, a reference for the pharmaceutical trade. The analysis included dosage forms for oral administration and drugs and their combination with antibacterial action. After this survey, we identified the constitution of the flavoring, sweetening, and coloring agents of each medicine. The results are presented in a descriptive form. Results Twelve drugs or associations are distributed in 70 medicines. Oral suspension was the most common pharmaceutical dosage form. Sweeteners were sucrose, sodium saccharin, and sodium cyclamate. All the coloring agents observed are synthetic and the most frequent ones were yellow twilight no. 6, yellow tartrazine no. 5, and red ponceau 4R. The presence of two or more types of flavorings per medicine was observed. Conclusion Antibacterials use coloring agents, flavorings, and sweeteners to facilitate the administration of medicines for children, using up to six different substances per formulation. No natural coloring agent was observed, demonstrating an issue to be explored in the future. It is important to note that, although necessary, these excipients are responsible for a high incidence of allergic reactions in children.

The current study evaluated the effect of location and amount of various superdisintegrants on the properties of tablets made by twin-screw melt granulation (TSMG). Sodium-croscarmellose (CCS), crospovidone (CPV), and sodium starch glycolate (SSG) were used in various proportions intra- and extra-granular. Tabletability, compactibility, compressibility as well as friability, disintegration, and dissolution performance were assessed. The extra-granular addition resulted in the fasted disintegration and dissolution. CPV performed superior to CCS and SSG. Even if the solid fraction (SF) of the granules was lower for CPV, only a minor decrease in tabletability was observed, due to the high plastic deformation of the melt granules. The intra-granular addition of CPV resulted in a more prolonged dissolution profile, which could be correlated to a loss in porosity during tableting. The 100% intra-granular addition of the CPV resulted in a distinct decrease of the disintegration efficiency, whereas the performance of SSG was unaffected by the granulation process. CCS was not suitable to be used for the production of an immediate-release formulation, when added in total proportion into the granulation phase, but its efficiency was less impaired compared to CPV. Shortest disintegration (78 s) and dissolution (Q80: 4.2 min) was achieved with CPV extra-granular. Using CPV and CCS intra-granular resulted in increased disintegration time and Q80. However, at a higher level of appx. 500 s and appx. 15 min, only SSG showed a process and location independent disintegration and dissolution performance. Supplementary Information The online version contains supplementary material available at 10.1208/s12249-021-02056-0.

In Belgium, the incorporation of phages into magistral preparations for human application has been permitted since 2018. The stability of such preparations is of high importance to guarantee quality and efficacy throughout treatments. We evaluated the ability to preserve infectivity of four different phages active against three different bacterial species in five different buffer and infusion solutions commonly used in medicine and biotechnological manufacturing processes, at two different concentrations (9 and 7 log pfu/mL), stored at 4 °C. DPBS without Ca2+ and Mg2+ was found to be the best option, compared to the other solutions. Suspensions with phage concentrations of 7 log pfu/mL were unsuited as their activity dropped below the effective therapeutic dose (6–9 log pfu/mL), even after one week of storage at 4 °C. Strong variability between phages was observed, with Acinetobacter baumannii phage Acibel004 being stable in four out of five different solutions. We also studied the long term storage of lyophilized staphylococcal phage ISP, and found that the titer could be preserved during a period of almost 8 years when sucrose and trehalose were used as stabilizers. After rehydration of the lyophilized ISP phage in saline, the phage solutions remained stable at 4 °C during a period of 126 days.

In a formulation, traces of peroxides in copovidone can impact the stability of drug substances that are prone to oxidation. The present study aimed to investigate the impact of peroxides in novel Plasdone™ S630 Ultra and compare it with regular Plasdone™ S630 on the oxidative degradation of quetiapine fumarate amorphous solid dispersions prepared via hot-melt extrusion technique. The miscibility of copovidones with drug was determined using the Hansen solubility parameter, and the results indicated a miscible drug–polymer system. Melt viscosity as a function of temperature was determined for the drug–polymer physical mixture to identify the suitable hot-melt extrusion processing temperature. The binary drug and polymer (30:70 weight ratio) amorphous solid dispersions were prepared at a processing temperature of 160°C. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies of amorphous solid dispersions revealed the formation of a single-phase amorphous system with intermolecular hydrogen bonding between the drug and polymer. The milled extrudates were compressed into tablets by using extragranular components and evaluated for tabletability. Stability studies of the milled extrudates and tablet formulations were performed to monitor the oxidative degradation impurity (N-oxide). The N-oxide impurity levels in the quetiapine fumarate - Plasdone™ S630 Ultra milled extrudates and tablet formulations were reduced by 2- and 3-folds, respectively, compared to those in quetiapine fumarate - Plasdone™ S630. The reduced oxidative degradation and improved hot-melt extrusion processability of Plasdone™ S630 Ultra make it a better choice for oxidation-labile drugs over Plasdone™ S630 copovidone.

Supersaturated drug delivery system (SDDS) enables the solubility and sustained membrane transport of poorly water-soluble drugs. SDDS provides higher drug concentration in the dispersed phase and equilibrium in the continuous phase, which corresponds to amorphous solubility of the drug. Rifaximin (RFX) is a nonabsorbable BCS class IV drug approved for the treatment of irritable bowel syndrome and effective against Helicobacter pylori. RFX shows slow crystallization and precipitation in an acidic pH of 1.2-2, leading to obliteration of its activity in the gastrointestinal tract. The objective of the present study is to inhibit the precipitation of RFX, involving screening of polymers at different concentrations, using an in-house developed microarray plate method and solubility studies which set forth hydroxypropyl methylcellulose (HPMC) E15, Soluplus, and polyvinyl alcohol to be effective precipitation inhibitors (PIs). Drug-polymer precipitates (PPTS) are examined for surface morphology by scanning electron microscopy, solid-phase transformation by hot stage microscopy, the nature of PPTS by polarized light microscopy, and drug-polymer interactions by Fourier transform infrared and nuclear magnetic resonance spectroscopy. Besides, the unfathomed molecular mechanism of drug-polymer interplay is discerned at the air-water interface using sum-frequency generation spectroscopy to correlate the interfacial hydrogen bonding properties in bulk water. Surprisingly, all studies disseminate HPMC E15 and Soluplus as effective PIs of RFX.

Background Diseases of the bowel are not always displayed on conventional abdominal computed tomography (CT). The studied oral contrast agent aims to improve this. Purpose To investigate whether the use of a novel oral contrast for abdominal CT enables the same diagnostic advantages as seen in magnetic resonance imaging (MRI). Material and Methods Twenty-five consented volunteers drank up to 1400 mL of a stable, drinkable foam. Comments on acceptance and side effects were noted immediately and 24 h later. Foam palatability was documented through interviews, and distribution in the small bowel by Hounsfield units from the CT software. The CT results were compared with age- and sex-matched controls, pretreated according to routine. A non-enhanced abdominal CT protocol of lowest possible radiation dose was used. External referees evaluated all data obtained. Results Foam was considered odd to swallow, and fullness was reported by all volunteers after 950 mL. Five had difficulties in drinking the last 320 mL and two abstained from it. All adverse symptoms were mild. The distribution in the small bowel was on par with standard agents. Foam density revealed stability with intraluminal values of around –550 HU from stomach to terminal ileum, satisfying the requirement of a great bowel lumen-to-wall contrast. External reviewers re-evaluated all our data, and one predicted the foam to offer a potential for improved diagnostics. Conclusion A CT true-negative bowel filling agent was formulated, with high acceptance, few side effects, and a potential to mimic T1-weighted MRI images.

The purpose of the present study was to investigate the effect of the coformer difference on particle surface solution-mediated phase transformation (PS-SMPT) during cocrystal particle dissolution in aqueous media in the absence and presence of polymers. SMPT can occur either in the bulk phase or at the particle surface because drug molecules can be supersaturated at the dissolving cocrystal surface, as well as in the bulk phase. Previously, bulk phase SMPT has been primarily investigated in formulation development. However, little is known about the effects of coformers and polymers on PS-SMPT of cocrystals. In this study, six carbamazepine (CBZ) cocrystals were used as model cocrystals (malonic acid (MAL), succinic acid (SUC), glutaric acid (GLA), adipic acid (ADP), saccharin (SAC), and nicotinamide (NCT); nonsink dissolution tests were performed with or without a precipitation inhibitor (hydroxypropyl methylcellulose (HPMC)) at pH 6.5. The residual particles were analyzed by powder X-ray diffraction, differential scanning calorimetry, polarized light microscopy (PLM), and scanning electron microscopy. Real-time PLM was used to directly observe rapid PS-SMPT. In the absence of HPMC, supersaturation was not observed in the bulk phase for all cocrystals. All cocrystals rapidly transformed to CBZ dihydrate aggregates via PS-SMPT (mostly within 1 min). In contrast, in the presence of 0.1% HPMC, supersaturation was observed for CBZ-SUC, CBZ-ADP, CBZ-SAC, and CBZ-NCT but not for CBZ-MAL and CBZ-GLA. The cocrystals with lower solubility coformers tended to induce higher supersaturation in the bulk phase. The PS-SMPT of CBZ-SUC, CBZ-ADP, and CBZ-SAC was slowed down by HPMC. By suppressing PS-SMPT, the cocrystals exhibited its supersaturation potential, depending on the properties of each coformer. To take advantage of the supersaturation potential of cocrystals to improve oral drug absorption, it is important to suppress particle surface SMPT in addition to bulk phase SMPT.

Background Bowel preparation for colonoscopy is often poorly tolerated due to poor palatability and adverse effects. This can negatively impact on the patient experience and on the quality of bowel preparation. This systematic review and meta-analysis was carried out to assess whether adjuncts to bowel preparation affected palatability, tolerability and quality of bowel preparation (bowel cleanliness). Methods A systematic search strategy was conducted on PubMed, MEDLINE, EMBASE and the Cochrane Database of Systematic Reviews to identify studies evaluating adjunct use for colonoscopic bowel preparation. Studies comparing different regimens and volumes were excluded. Specific outcomes studied included palatability (taste), willingness to repeat bowel preparation, gastrointestinal adverse events and the quality of bowel preparation. Data across studies were pooled using a random-effects model and heterogeneity assessed using I2-statistics. Results Of 467 studies screened, six were included for analysis (all single-blind randomised trials; n = 1187 patients). Adjuncts comprised citrus reticulata peel, orange juice, menthol candy drops, simethicone, Coke Zero and sugar-free chewing gum. Overall, adjunct use was associated with improved palatability (mean difference 0.62, 95% confidence interval 0.29–0.96, p

PURPOSE: A multitude of different versions of the same medication with different inactive ingredients are currently available. It has not been quantified how this has evolved historically. Furthermore, it is unknown whether healthcare professionals consider the inactive ingredient portion when prescribing medications to patients. METHODS: We used data mining to track the number of available formulations for the same medication over time and correlate the number of available versions in 2019 to the number of manufacturers, the years since first approval, and the number of prescriptions. A focused survey among healthcare professionals was conducted to query their consideration of the inactive ingredient portion of a medication during prescriptions. RESULTS: The number of available versions of a single medication have dramatically increased in the last 40 years. The number of available, different versions of medications are largely determined by the number of manufacturers producing this medication. Healthcare provides commonly do not consider these the inactive ingredient portion when prescribing a medication. CONCLUSIONS: A multitude of available versions of the same medications provides a potentially under-recognized opportunity to prescribe the most suitable formulation to a patient as a step towards personalized medicine and mitigating potential adverse events from inactive ingredients.

In this study, an innovative methodology to optimize amorphization during the hot melt impregnation (HMI) process was proposed. The novelty of this report revolves around the use of thermal analysis in combination with design of experiments (DoEs) to reduce residual crystallinity during the HMI process. As a model formulation, a mixture of ibuprofen (IBU) and Neusilin was used. The main aim of the study was to identify the critical process parameters of HMI and determine their optimal values to assure a robust impregnation process and possibly the highest possible amorphization rate of IBU. In order to realize this, a DoE approach was proposed based on a face-centered composite design involving three factors. The IBU/Neusilin ratio, the feeding rate, and the screw speed were considered as variables, while the residual crystallinity level of IBU, determined using differential scanning calorimetry (DSC), was measured as the response. Additionally, the stability of IBU under HMI was analyzed using high-performance liquid chromatography to estimate the extent of potential degradation. In order to verify the correctness of the DoE model, tested extrudates were manufactured by HMI and the obtained extrudates were thoroughly examined using scanning electron micrography, X-ray powder diffraction, and DSC.

Nowadays, the focus has been shifted to new technologies for improving drug solubility, permeability, and bioavailability, amid unprecedentedly increasing the number of newly discovered Active Pharmaceutical Ingredients (APIs), which are mostly categorized under Biopharmaceutical Classification System (BCS) as class-II and class IV. Traditional technologies and classical formulation strategies often fail to address most of the formulation problems associated with new APIs, particularly solubility and bioavailability. Therefore, exploring new and innovative technologies on an industrial scale is a prerequisite and requires modernization of manufacturing processes, as well as more advanced research and development. Liquisolid technology is a new, innovative industrial technology, particularly designed for either improving the release rates of poorly absorbed drugs or controlling their release pattern by achieving sustained-release profiles with zero-order release kinetics. Besides, it is a promising photoprotective system for photosensitive drugs and can further be used for modulating the drug microenvironmental pH. The next generation of liquisolid systems stems from a set of emerging technologies, such as liqui-pellet technology, which originates from combining liquisolid technology with pelletization technique, particularly extrusion-spheronization technique. This review article highlights the current state of liquisolid technology, ongoing challenges, characterization and applications, possible future prospects, the advent of new and emerging technologies, and the revolution of the next generation of liquisolid technology.

Objective: To prepare the sustained-release complex, quercetin was incorporated with β- cyclodextrin (β-CD) and the effect of β-CD–quercetin complex on the growth of ethanol-injuried hepatocytes was studied. Methods: By using scanning electron microscopy, infrared spectroscopy, and release rate analysis, β- CD–quercetin complex was identified. The effect of different concentrations of β-CD–quercetin complex on the growth of ethanol-damaged hepatocytes at different time was observed by using MTT assay, and the cell quantity and morphology were observed by using hematoxylin–eosin staining. By using single-cell gel electrophoresis, the prevention of β-CD–quercetin complex from the DNA damage of ethanol-damaged BRL-3A cells was studied, and Olive tail moment was calculated. Results: β-CD–quercetin complex as the sustained-release complex was successfully prepared. The ethanol induced damage of BRL-3A cells could be prevented by 20, 40 and 80 mg/L of quercetin complex, and the protection mechanism of hepatocyte was related to the antioxidation of DNA. Conclusion: Quercetin sustained-release complex could be prepared with β-CD, and it might be used to treat alcoholic liver disease.

The current work focuses on the formulation development, optimization, and in vivo assessment of nano-sized silver sulfadiazine ( nSSD) and micron-sized silver sulfadiazine ( mSSD) topical gel composed of Aloe vera gel ( Aloe gel) and Carbopol 940 for the management of second-degree burn wound. The optimized concentration of gel-forming agent (Carbopol 940) was chosen based on best possible consistency and spreadability of the gel. The second-degree burn infliction was developed in the posterior region of rats followed by anesthesia. Afterward, the created wounds were further treated individually by both the gel formulation (1 application daily) for 14 days and observations were recorded. The nSSD gel showed better wound healing and a higher degree of tissue hyperplasia as compared with mSSD gel in rats. In vitro drug release study showed better drug release from nSSD gel (74.25 ± 3.331%) as compared with mSSD gel formulation (61.32 ± 2.112%) after 24 hours. The nSSD and mSSD topical gel-treated rats showed 95.63% and 78.75% wound healing after 14 days, while in the case of control group rats, 48.65% wound contraction was seen after 14 days. Furthermore, the histopathological study revealed that the nSSD gel was more efficient in controlling the wound infection and showed better wound healing as compared with mSSD gel formulation.

In-vitro permeation studies were conducted to assess the feasibility of fabricating dissolving-microneedle-array systems to release sumatriptan succinate. The formulations consisted mainly of the encapsulated active ingredient and a water-soluble biologically compatible polymer, polyvinylpyrrolidone (PVP), approved by the U.S. Food and Drug Administration (FDA). Tests with Franz-type diffusion cells and Gottingen minipig skins showed an increase of the transdermal flux compared to passive diffusion. A preparation, containing 30% by mass of PVP and 8.7mg sumatriptan, produced a delivery rate of 395±31μg/cm2h over a 7-hour period after a negligible lag time of approximately 39min. Theoretically, a 10.7cm2 microneedle-array patch loaded with 118.8mg of the drug would provide the required plasma concentration, 72ng/mL, for nearly 7h.

The use of chemical permeation enhancers (PEs) is the most widely tested approach to improve oral absorption of low permeability active agents, as represented by peptides. Several hundred PEs increase intestinal permeability in preclinical bioassays, yet few have progressed to clinical testing and, of those, only incremental increases in oral bioavailability (BA) have been observed. Still, average BA values of ~1% were sufficient for two recent FDA approvals of semaglutide and octreotide oral formulations. PEs are typically screened in static in vitro and ex-vivo models where co-presentation of active agent and PE in high concentrations allows the PE to alter barrier integrity with sufficient contact time to promote flux across the intestinal epithelium. The capacity to maintain high concentrations of co-presented agents at the epithelium is not reached by standard oral dosage forms in the upper GI tract in vivo due to dilution, interference from luminal components, fast intestinal transit, and possible absorption of the PE per se. The PE-based formulations that have been assessed in clinical trials in either immediate-release or enteric-coated solid dosage forms produce low and variable oral BA due to these uncontrollable physiological factors. For PEs to appreciably increase intestinal permeability from oral dosage forms in vivo, strategies must facilitate co-presentation of PE and active agent at the epithelium for a sustained period at the required concentrations. Focusing on peptides as examples of a macromolecule class, we review physiological impediments to optimal luminal presentation, discuss the efficacy of current PE-based oral dosage forms, and suggest strategies that might be used to improve them.

The preparation of liquisolid systems presents a promising and innovative possibility for enhancing dissolution profiles and improving the bioavailability of poorly soluble drugs. This study aims to evaluate the differences in the properties of liquisolid systems containing combinations of 3 commercially used superdisintegrants (sodium starch glycolate, crospovidone, and croscarmellose sodium). Multiple regression models and contour plots were used to study how the amount and the type of superdisintegrant used affected the quality parameters of liquisolid tablets. The results revealed that an increased amount of crospovidone in the mixture improves disintegration and wetting time and enhances drug release from the prepared liquisolid tablets. Moreover, it was observed that a binary blend of crospovidone and sodium starch glycolate improved tablet disintegration. Considering the obtained results, it could be stated that crospovidone showed the best properties to be used as superdisintegrant for the preparation of liquisolid systems containing rosuvastatin.

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y1), percentage friability (Y2), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC0-12) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

This study addresses the quantitative influence of 12 different materials (active pharmaceutical ingredients and excipients as surrogate active pharmaceutical ingredients) on the critical quality attributes of twin screw granulated products and subsequently produced tablets. Prestudies demonstrated the significant influence of the chosen model materials (in combination with crospovidone) on the disintegration behavior of the resulting tablets, despite comparable tablet porosities. This study elucidates possible reasons for the varying disintegration behavior by investigating raw material, granule, and tablet properties. An answer could be found in the mechanical properties of the raw materials and the produced granules. Through compressibility studies, the materials could be classified into materials with high compressibility, which deform rather plastically under compression stress, and low compressibility, which display breakages under compression stress. In general, and apart from (pseudo)-polymorphic transformations, brittle materials featured excellent disintegration performance, even at low resulting tablet porosities

Gums are complex carbohydrate molecules which have the ability to bind water and form gels at low concentration. These carbohydrates are often associated with proteins and minerals in their structure. Gums are of various types such as seed gums, exudate gums, microbial gums, mucilage gums, seaweeds gums, etc. Exudate gums are plant gums which ooze out from bark as a result of a protection mechanism upon injury. Exudate gums have been used by humans since ancient times for various applications due to their easy availability. The main characteristics which make them fit for use in various applications are viscosity, adhesive property, stabilization effect, emulsification action and surface-active property. Major applications of these gums are in food products, the paper, textile, cosmetics and pharmaceutical industries, oil-well drilling, etc. In the present paper, the chemistry, properties, processing and applications of commercially available exudate gums such as acacia gum or gum arabic, karaya gum, ghatti gum and tragacanth gum are discussed. Recent literature reveals that apart from the above mentioned applications, these gums also have nutritional properties which are being explored. Other gums cannot replace them because of their certain unique characteristics. © 2020 Society of Chemical Industry.

Polymer-based amorphous solid dispersions (ASDs) comprise one of the most promising formulation strategies devised to improve the oral bioavailability of poorly water-soluble drugs. Exploitation of such systems in marketed products has been limited because of poor understanding of physical stability. The internal disordered structure and increased free energy provide a thermodynamic driving force for phase separation and recrystallization, which can compromise therapeutic efficacy and limit product shelf life. A primary concern in the development of stable ASDs is the solubility of the drug in the polymeric carrier, but there is a scarcity of reliable analytical techniques for its determination. In this work, terahertz (THz) Raman spectroscopy was introduced as a novel empirical approach to determine the saturated solubility of crystalline active pharmaceutical ingredient (API) in polymeric matrices directly during hot melt extrusion. The solubility of a model compound, paracetamol, in two polymer systems, Affinisol 15LV (HPMC) and Plasdone S630 (copovidone), was determined by monitoring the API structural phase transitions from crystalline to amorphous as an excess of crystalline drug dissolved in the polymeric matrix. THz-Raman results enabled construction of solubility phase diagrams and highlighted significant differences in the solubilization capacity of the two polymer systems. The maximum stable API-load was 20 wt % for Affinisol 15LV and 40 wt % for Plasdone S630. Differential scanning calorimetry and XRPD studies corroborated these results. This approach has demonstrated a novel capability to provide real-time API-polymer phase equilibria data in a manufacturing relevant environment and promising potential to predict solid-state solubility and physical stability of ASDs.

Our aim was to investigate the feasibility of a tablet coating mixing technique using a V-shaped blender to produce coated tablets by mixing only tablets and polymer powder. Tablet coating was achieved as follows. First, polymethacrylate latex was freeze-dried to prepare a coating powder. Second, tablets and polymer powder were mixed using the blender, yielding coated tablets. Two types of coating powder, composed of colloidal or non-colloidal particles of the same polymer, were prepared and used in the mixing treatment. Colloidal powder was rapidly pulverized due to impact by falling tablets in the blender and adhered to tablet surface. The powder on tablets was easily consolidated due to compression by tumbling tablets, yielding a polymer layer that can suppress drug release after curing. In contrast, non-colloidal powder was insufficiently pulverized and densified, and its deposition did not occur. Therefore, tablets are mechanically coated using a V-shaped blender by using colloidal polymer powder with high grindability and compactability. The impact rose by increasing rotation speed of the blender and promoted deposition of the polymer. Appropriate collision impacts of tablet-tablet and tablet-wall are required for successful tablet coating, although too intense impacts lead to tablet breakage and removal of the membrane.

Particle engineering has become a hot topic in the field of modified-release delivery systems during last decades. It has a wide range of pharmaceutical applications and is a bridge linking between drugs and drug delivery systems. Particles are an important part of many dosage forms and viewed as a carrier of drugs. Their size, shape, crystalline form, and structure directly affect the stability and releasing pattern of drugs. Engineering size or modifying particles by forming porous, core-shell, or skeleton structures can realize the development and utilization of functionally modified release systems (including fast-release systems, sustained-release systems, and targeted-release systems). However, there are certain problems in the practical application, such as bitter taste and coating damage. Combining with some polymer or lipid materials to form core-shell or embedded structures is considered as the key to taste masking. And, using cushioning agents is proven to be effective in preserving the integrity of the functional coating film of multiparticulates during tableting. To sum up, this review, from a particle engineering point, expounds the influence of different factors on the functionality of particles and offers some useful comments and suggestions for industry personnel.

This work is a proof of concept study establishing the potential of electrosprayed Janus particles for combined photodynamic therapy-chemotherapy. Sub-micron-sized particles of polyvinylpyrrolidone containing either an anti-cancer drug (carmofur) or a photosensitiser (rose bengal; RB), and Janus particles containing both in separate compartments were prepared. The functional components were present in the amorphous form in all the particles, and infrared spectroscopy indicated that intermolecular interactions formed between the different species. In vitro drug release studies showed that both carmofur and RB were released at approximately the same rate, with dissolution complete after around 250 min. Cytotoxicity studies were undertaken on model human dermal fibroblasts (HDF) and lung cancer (A549) cells, and the influence of light on cell death explored. Formulations containing carmofur as the sole active ingredient were highly toxic to both cell lines, with or without a light treatment. The RB formulations were non-toxic to HDF when no light was applied, and with photo-treatment caused large amounts of cell death for both A549 and HDF cells. The Janus formulation containing both RB and carmofur was non-toxic to HDF without light, and only slightly toxic with the photo-treatment. In contrast, it was hugely toxic to A549 cells when light was applied. The Janus particles are thus highly selective for cancer cells, and it is hence proposed that such electrosprayed particles containing both a chemotherapeutic agent and photosensitiser have great potential in combined chemotherapy/photodynamic therapy.

Marine resources exist in vast numbers and show enormous diversity. As a result, there are likely many possible applications for marine molecules of interest in the cosmetic industry, whether as excipients or additives, but especially as active substances. It is possible to obtain extracts from active substances; for example, quite a few algae species can be used in moisturizing or anti-ageing products. In the field of topical photoprotection, mycosporine-like amino acids and gadusol are important lines of enquiry that should not be overlooked. In the field of additives, the demonstration that certain seaweed (algae) extracts have antimicrobial properties suggests that they could provide alternatives to currently authorized preservatives. These promising leads must be explored, but it should be kept in mind that it is a long process to bring ingredients to market that are both effective and safe to use.

At present, coamorphous systems have attracted increasing interest in the pharmaceutical field owing to their enhanced stabilities, increased solubilities, and improved bioavailabilities compared with those of their pure amorphous and crystalline counterparts. In this study, a novel coamorphous solid form of ibrutinib (IBT) and saccharin (SAC) (1:1 molar ratio) was prepared through rotary vacuum evaporation and then characterized. Differential scanning calorimetry and X-ray powder diffraction indicated the formation of the coamorphous IBT-SAC after rotary vacuum evaporation. Compared with amorphous IBT, coamorphous IBT-SAC exhibited enhanced stability owing to the intermolecular interaction between IBT and SAC. Moreover, the solubility and dissolution of the coamorphous IBT-SAC were increased up to 4.0-7.7 times and 4.3 times, respectively, compared with those of its crystalline Form A. In addition to the superior behaviors of coamorphous IBT-SAC in vitro, the in vivo bioavailability study revealed notable increases in the Cmax and area under the curve0-t of the coamorphous form compared with those of its crystalline Form A. The current study demonstrates that the coamorphization of IBT and SAC presents a promising technology to overcome the limitations of solubility and stability that arise from IBT and can therefore contribute to a major improvement in the bioavailability of IBT.

The purpose of this study was to research a novel combination of Plasdone-S630 and HPMCAS-HF as hot-melt carrier used in ziprasidone hydrochloride for enhanced oral bioavailability and dismissed food effect. Ziprasidone hydrochloride solid dispersion (ZH-SD) was prepared by hot-melt extrusion technique, and its optimized formulation was selected by the central composite design (CCD), which was characterized for powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), in vitro dissolution study, and stability study. Finally, the in vivo study in fasted/fed state was carried out in beagle dogs. Based on PXRD analysis, HME technique successfully dispersed ziprasidone with a low crystallinity hydrochloride form in the polymers. According to the analysis of FTIR, hydrogen bonds were formed between drug and polymers during the process of HME. Without any noticeable bulk, crystalline could be found from the micrograph of ZH-SD when analyzed the result of scanning electron microscope (SEM). Pharmacokinetics studies indicated that the bioavailability of ZH-SD formulation had no significant difference in fasted and fed state, and the Cmax and AUC of ZH-SD were two fold higher than Zeldox® in fasted state. This result indicated that ziprasidone has achieved a desired oral bioavailability in fasted state and no food effect.

Background There are a limited number of studies that have examined the real-world effectiveness of smoking cessation aids and relapse longitudinally in population-representative samples. This study examines the association between use of nicotine gum, patch, bupropion, and varenicline and time to relapse as well as any changes in the association with increased length of abstinence. Methods Data of 1821 current adult smokers (18+) making their first serious quit attempt were compiled from 4504 individuals enrolled in the Ontario Tobacco Survey, a representative telephone survey of Ontario adults, which followed smokers every 6 months for up to 3 years. Use of cessation aids at the time of initial report of a quit attempt was analyzed. A flexible parametric survival model was developed to model length of abstinence, controlling for potential confounders. Results The best fit model found knots at 3, 13, 43, and 212 days abstinent, suggesting different rates of relapse in the periods marked by those days. Use of the patch and varenicline was associated with lower rates of relapse, but no positive effect was found for bupropion or nicotine gum. The effectiveness of the patch reversed in effect after the first month of abstinence. Conclusions This study is one of few reports of long-term quitting in a population-representative sample and demonstrates that the effectiveness of some pharmacological cessation aids (the patch and varenicline can be seen in a population sample). Previous failures in real-world studies of the effectiveness of smoking cessation aids may reflect differences in the products individuals use and differences in the timing of self-reported cessation. Implications While a large number of randomized controlled trials have shown the efficacy of many pharmaceutical smoking cessation aids, evidence of their effectiveness in observational studies in the real world is ambiguous. This study uses a longitudinal cohort of a representative sample of smokers to show that the effectiveness of pharmaceutical cessation aids can be demonstrated in real-world use situations, but effectiveness varies by product type and has time-varying effects.

Poly(2-ethyl-2-oxazoline) (PEOX), a biocompatible polymer considered as pseudopolypeptide, was introduced as a potential alternative to the commonly used polymer, poly(vinylpyrrolidone) (PVP) for the preparation of solid dispersion with a poorly soluble drug. Glipizide (GPZ), a Biopharmaceutical Classification System class II model drug, was selected for solubility and dissolution rate study. GPZ-polymer solid dispersions and physical mixtures were characterized and investigated by X-ray diffractometry, differential scanning calorimetry, scanning electron microscopy, and FTIR spectroscopy. The impact of polymers on crystal nucleation kinetics was studied, and PEOX exhibited strong inhibitory effect compared with PVP. Solubility and dissolution behavior of the prepared solid dispersions and their physical blends were in vitro examined and evaluated. A significant enhancement in GPZ solubility was obtained with PEOX compared with the pure drug and solid dispersion with PVP. A big improvement in the intrinsic dissolution rate (45 times) and dissolved amount of GPZ (58 times) was achieved with PEOX in fasted state simulated intestinal fluid, against comparable enhancement observed with PEOX and PVP in phosphate buffer at pH 6.8. Lower molecular weight of PEOX-5K (5000 g/mol) was found to be superior to higher molecular weight PEOX-50K (50,000 g/mol) in the improvement of dissolution behavior. The findings of this study with GPZ as a model drug introduce lower molecular weight PEOX as a promising polymeric carrier toward better oral bioavailability of poorly soluble drugs.

Solid dispersions of spironolactone with Soluplus

Purpose After cleft lip and palate surgical procedures, patients often need nostril supports to help the reconstructed nostrils retain their shape during healing. Many postoperative nasal stents use a one-size-fits-all approach, in which a standard rubber tube retainer is trimmed and used to support the healing nares. The purpose of this study was to examine photogrammetry and 3-dimensional (3D) printing as a fabrication tool for postoperative patient-specific nasal supports that can be loaded with bioactive agents for localized delivery. Materials and Methods A “normal” right nostril injection mold was prepared from a left-sided unilateral cleft defect, and the negative-space impression was modeled using a series of photographs taken at different rotation angles with a commercial mobile phone camera. These images were “stitched” together using photogrammetry software, and the computer-generated models were reflected, joined, and digitally sculpted to generate hollow bilateral supports. Three-dimensional prints were coated with polyvinylpyrrolidone-penicillin and validated for their ability to inhibit Escherichia coli using human blood agar diffusion assays. Results The results showed that our approach had a high level of contour replication and the antibiotic coating was able to inhibit bacterial growth with a mean zone of inhibition of 15.15 ± 0.99 mm (n = 9) (P Conclusions Consumer-grade 3D printing displays potential as a fabrication method for postoperative cleft bilateral nasal supports and may support the surgically reconstructed internal contours. The results of this study suggest that such types of bioactive 3D prints may have potential applications in personalized drug-delivery systems and medical devices.

The preparation of liquisolid systems (LSS) represents a promising method for enhancing a dissolution rate and bioavailability of poorly soluble drugs. The release of the drug from LSS tablets is affected by many factors, including the disintegration time.The evaluation of differences among LSS containing varying amounts and types of commercially used superdisintegrants (Kollidon® CL-F, Vivasol® and Explotab®).LSS were prepared by spraying rosuvastatin solution onto Neusilin® US2 and further processing into tablets. Varying amounts of superdisintegrants were used and the differences among LSS were evaluated. The multiple scatter plot method was used to visualize the relationships within the obtained data.All disintegrants do not showed negative effect on the flow properties of powder blends. The type and concentration of superdisintegrant had an impact on the disintegration time and dissolution profiles of tablets. Tablets with Explotab® showed the longest disintegration time and the smallest amount of released drug. Fastest disintegration and dissolution rate were observed in tablets containing Kollidon® CL-F (≥2.5% w/w). Also tablets with Vivasol® (2.5-4.0% w/w) showed fast disintegration and complete drug release.Kollidon® CL-F and Vivasol® in concentration ≥2.5% are suitable superdisintegrants for LSS with enhanced release of drug.

Virus safety of cell-based medicinal products is a particular challenge. These products are frequently manufactured using various human- or animal-derived starting and raw materials (serum and feeder-cells) in cell culture, which are possible sources for viral contamination. For living or proliferating cells, no methods for virus inactivation (such as heat or chemical treatment) can be used and the options for testing these medicinal products for all possible viral contaminations are very limited. As a consequence, other safety measures, in particular careful selection and testing of starting and raw materials, are very important. For raw materials, attention should be paid to cell-culture additives of biological origin, such as human and bovine serum and porcine trypsin. Whenever possible, manufacturing steps for inactivation and removal of viruses should be introduced as an additional safety measure. In addition, recombinant products from animal cell cultures (such as growth factors, monoclonal antibodies for cell sorting, viral vectors) are used and have to be tested for virus safety.

Poor powder tabletability is a common problem that challenges the successful development of high-quality tablet products. Using noncompressible microcrystalline cellulose beads, we demonstrate that surface coating is an effective strategy for modulating tabletability, almost at will, through judicious selection of coating material. This strategy has broad applicability as tabletability of such particles is dictated by the properties of the outermost layer coat regardless the nature of the core. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:2645–2648, 2015