Search

Photoelectrochemical devices based on p-type nanostructured semiconducting materials show strong potentialities for various applications, such as photovoltaics and photocatalysis. While only one study was reported on the use of the reference dye P1 for solid-state p-type dye-sensitized solar cells (DSSC), in this work we have systematically investigated two diketopyrrolopyrrole (DPP) derivatives as sensitizers for solid-state p-type DSSC based on NiO and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as solid-state electron transporter material. We report on the performance in solid-state p-type DSSC of a simple DPP dye bearing a thienyl carboxylic acid as the binding group and a parent compound substituted by a pyromellitimide (PYRO) playing the role of a secondary inner electron acceptor. By focusing on the dye/PCBM interface, we specifically show using transient photoluminescence measurements that the presence of a secondary electron acceptor unit can efficiently favor the formation of the (dye+/PCBM-) state, owing to its significant reducing ability and lifetime of the charge separated state. As a consequence, using these DPP derivatives leads to unprecedented photocurrents up to 0.45 mA cm-2, which are 10 times larger than previously reported values for the system based on P1. Our analysis also demonstrates the strong correlation between the ability of the dyes to efficiently generate charge carriers and the resulting photocurrents. [ABSTRACT FROM AUTHOR]

Catalytic ozonation is a new method used for removal of NH4OH solution. Therefore, high catalytic performance (activity and selectivity) should be achieved. In this work, we report the synthesis and catalytic performance of Fe2O3-Co3O4 modified dolomite in the catalytic ozonation of NH4OH solution. Dolomite was successfully activated and modified with Fe2O3 and Co3O4. Firstly, dolomite was activated by heating at 800°C for 3 h and followed by KOH treatment. Activated dolomite was modified with Fe2O3 by the atomic implantation method using FeCl3 as Fe source. Fe2O3 modified dolomite was further modified with Co3O4 by precipitation method. The obtained catalysts were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), N2 adsorption–desorption (BET), and temperature-programmed reduction (H2-TPR). From SEM image, it was revealed that nano-Fe2O3 and Co3O4 particles with the size of 80–120 nm. Catalytic performance of activated dolomite, Fe2O3 modified dolomite, and Fe2O3-Co3O4 modified dolomite in catalytic ozonation of NH4+ solution was investigated and evaluated. Among 3 tested catalysts, Fe2O3-Co3O4 modified dolomite has the highest NH4+ conversion (96%) and N2 selectivity (77.82%). Selectivity toward N2 over the catalyst was explained on the basis of bond strength M-O in oxides through the standard enthalpy Δ H ° f of oxide. Catalyst with lower Δ H ° f value has higher N2 selectivity and the order is the following: Co3O4 (Δ H ° f of 60 kcal (mole O)) > Fe2O3 (Δ H ° f of 70 kcal (mole O)) > MgO (Δ H ° f of 170 kcal (mole O)). Moreover, high reduction ability of Fe2O3-Co3O4 modified dolomite could improve the N2 selectivity by the reduction of NO3- to N2 gas. [ABSTRACT FROM AUTHOR]

Catalytic ozonation is a new method used for removal of NH4OH solution. Therefore, high catalytic performance (activity and selectivity) should be achieved. In this work, we report the synthesis and catalytic performance of Fe2O3-Co3O4 modified dolomite in the catalytic ozonation of NH4OH solution. Dolomite was successfully activated and modified with Fe2O3 and Co3O4. Firstly, dolomite was activated by heating at 800°C for 3 h and followed by KOH treatment. Activated dolomite was modified with Fe2O3 by the atomic implantation method using FeCl3 as Fe source. Fe2O3 modified dolomite was further modified with Co3O4 by precipitation method. The obtained catalysts were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), N2 adsorption–desorption (BET), and temperature-programmed reduction (H2-TPR). From SEM image, it was revealed that nano-Fe2O3 and Co3O4 particles with the size of 80–120 nm. Catalytic performance of activated dolomite, Fe2O3 modified dolomite, and Fe2O3-Co3O4 modified dolomite in catalytic ozonation of NH4+ solution was investigated and evaluated. Among 3 tested catalysts, Fe2O3-Co3O4 modified dolomite has the highest NH4+ conversion (96%) and N2 selectivity (77.82%). Selectivity toward N2 over the catalyst was explained on the basis of bond strength M-O in oxides through the standard enthalpy Δ H ° f of oxide. Catalyst with lower Δ H ° f value has higher N2 selectivity and the order is the following: Co3O4 (Δ H ° f of 60 kcal (mole O)) > Fe2O3 (Δ H ° f of 70 kcal (mole O)) > MgO (Δ H ° f of 170 kcal (mole O)). Moreover, high reduction ability of Fe2O3-Co3O4 modified dolomite could improve the N2 selectivity by the reduction of NO3- to N2 gas. [ABSTRACT FROM AUTHOR]

An atomic implantation method was used to modify diatomite with CuCl. The CuCl/diatomite samples were characterized by different techniques, including FTIR, XRD, BET, SEM-TEM, EDX, and CO-TPR. Characterization results revealed the formation of CuCl particles of 50–60 nm highly dispersed on diatomite surface. CO adsorption measurements showed that 2CuCl/diatomite exhibits the highest CO adsorption capacity among all CuCl-modified samples with diatomite. Its CO adsorption capacity of 2.96 mmol/g at 30°C is 10 times higher than that of unmodified diatomite (0.29 mmol/g). The CO adsorption on CuCl-modified diatomites was found to fit well with the Langmuir–Freundlich model. [ABSTRACT FROM AUTHOR]

Nano Fe-BTC/graphene oxide (GO) composites were successfully synthesized by hydrothermal treatment with a microwave-assisted method. Samples were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), N2 adsorption–desorption, Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), and Ultraviolet–visible diffuse reflection spectroscopy (UV–Vis DRS). SEM image of Fe-BTC/GO-30 showed the particle size of 30–50 nm on the GO surface. From the UV–Vis diffuse reflectance spectra, it revealed that nano Fe-BTC/GO composite absorbed the wavelengths in the visible light region with a low bandgap energy of 2.2–2.45 eV. Fe-BTC/GO nanocomposites were tested for the photocatalytic degradation of reactive yellow 145 (RY-145) in aqueous solution. Fe-BTC/GO composites exhibited high photocatalytic activity. Thus, at pH of 3 and high initial concentration of 100 mg RY-145/L, removal efficiency reached the value of 98.18% after 60 min. of reaction. In comparison with Fe-BTC/GO synthesized by the solvothermal method, nano Fe-BTC/GO showed much higher RY-145 removal efficiency. Moreover, this Fe-BTC/GO-30 showed high catalytic activity stability and could be reused, opening the high potential application of this promising photo-Fenton catalyst in photocatalytic degradation of organic pollutants from aqueous solution. [ABSTRACT FROM AUTHOR]

Al-incorporated SBA-15 samples (xAl/SBA-15) were successfully prepared by "atomic implantation" method. The samples were characterized by X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), N2 adsorption-desorption isotherms (BET), and temperature-programmed desorption (NH3-TPD). In this catalyst, metal oxide species were highly dispersed on the SBA-15 surface and existed as isolated atoms. It was shown that the Al incorporation lead to the formation of medium and strong acid sites. The catalytic activity and selectivity were tested in a mild hydrothermal process for degradation of cotton cellulose to 5-hydroxymethyl furfural (5-HMF). A cellulose conversion of 68.5% and 5-HMF selectivity of 62.1% after 2 h of reaction at 170°C were achieved. The very high 5-HMF yield (42.57%) obtained in this paper is much higher than that was reported in the literature. [ABSTRACT FROM AUTHOR]

Human papillomavirus (HPV) is the most common sexually transmitted agent worldwide and is etiologically linked to several cancers, including cervical and genital cancers. NKG2D, an activating receptor expressed by NK cells, plays an important role in cancer immune-surveillance. We analyzed the impact of a NKG2D gene variant, rs1049174, on the incidence of HPV-related cancers in Vietnamese patients and utilized various molecular approaches to elucidate the mechanisms of NKG2D receptor regulation by rs1049174. In a group of 123 patients with HPV+ anogenital cancers, the low cytotoxicity allele LNK was significantly associated with increased cancer susceptibility (p = 0.016). Similar results were also observed in a group of 153 women with cervical cancer (p = 0.05). In functional studies, NK cells from individuals with LNK genotype showed a lower NKG2D expression and displayed less efficient NKG2D-mediated functions than NK cells with HNK genotype. Notably, the rs1049174 variant occurs within a targeting site for miR-1245, a negative regulator of NKG2D expression. Compared with the higher cytotoxicity allele HNK, the LNK allele was more efficiently targeted by miR-1245 and thus determined lower NKG2D expression in NK cells with the LNK genotype. The NKG2D variants may influence cancer immunosurveillance and thus determine susceptibility to various malignancies, including HPV-induced cancers. [ABSTRACT FROM AUTHOR]