Search

Spectral sensing is an emerging field driven by the need for fast and non-invasive methods for the chemical analysis of materials in agri-food, healthcare, and industrial applications. We demonstrate a near-infrared spectral sensor, based on a scalable fabrication process and combining high responsivity, narrow linewidth, and low noise. The sensor consists of 16 resonant-cavity-enhanced photodetectors, each showing a unique spectral response consisting of narrow peaks. The spectral sensor thereby covers the wavelength range between 890 and 1650 nm, where organic materials show relevant spectral features from first and second overtones. For the fabrication of the detector arrays, we propose a simple and scalable fabrication approach that yields largely improved device characteristics with respect to the grey-scale electron-beam lithography process reported earlier. Through a series of five optical lithography steps, tuning layers of silicon nitride are deposited stepwise to obtain 16 different thicknesses and reduced surface roughness. With this novel fabrication approach, the obtained photodetectors achieve an average peak linewidth of 55 nm, a maximum peak responsivity of 0.3 A/W, and high suppression of the non-resonant background. We also demonstrate the impact of these improvements on the sensing performance for two relevant problems through an experiment and a set of simulations. With lateral dimensions of ∼1.4 × 1.4 mm2, the proposed photodetector array can be the key to robust, portable, and low-cost sensing instrumentation for on-site material analysis in various application fields.

For decades, near-infrared (NIR) spectroscopy has been a valuable tool for material analysis in a variety of applications, ranging from industrial process monitoring to quality assessment. Traditional spectrometers are typically bulky, fragile and expensive, which makes them unsuitable for portable and in-field use. Thus, there is a growing interest for miniaturized, robust and low-cost NIR sensors. In this study, we demonstrate a handheld NIR spectral sensor module, based on a fully-integrated multipixel detector array, sensitive in the 850–1700 nm wavelength range. Differently from a spectrometer, the spectral sensor measures a limited number of NIR spectral bands. The capabilities of the spectral sensor module were evaluated alongside a commercially available portable spectrometer for two application cases: to quantify the moisture content in rice grains and to classify plastic types. Both devices achieved the two sensing tasks with comparable performance. Moisture quantification was achieved with a root mean square error (RMSE) prediction of 1.4% and 1.1% by the spectral sensor and spectrometer, respectively. Classification of the plastic type was achieved with a prediction accuracy on unknown samples of 100% and 96.4% by the spectral sensor and spectrometer, respectively. The results from this study are promising and demonstrate the potential for the compact NIR modules to be used in a variety of NIR sensing applications

A static filter array is developed based on Fabry–Perot cavities operating in the mid-infrared range from 2 to 4.5 µm, matching the absorption region of several gases relevant for air quality monitoring. The filters include two distributed Bragg reflectors and a high-index tuning element with varying thickness in between. The filters display high peak transmittance (>80%) and controllable peak width. The robustness, ease of fabrication and the possibility to tune the optical response to a specific application make the integrated filter arrays suitable for compact sensing systems.

Random dielectrics defines a class of non‐absorbing materials where the index of refraction is randomly arranged in space. Whenever the transport mean free path is sufficiently small, light can be confined in modes with very small volume. Random photonic modes have been investigated for their basic physical insights, such as Anderson localization, and recently several applications have been envisioned in the field of renewable energies, telecommunications, and quantum electrodynamics. An advantage for optoelectronics and quantum source integration offered by random systems is their high density of photonic modes, which span a large range of spectral resonances and spatial distributions, thus increasing the probability to match randomly distributed emitters. Conversely, the main disadvantage is the lack of deterministic engineering of one or more of the many random photonic modes achieved. This issue is solved by demonstrating the capability to electrically and mechanically control the random modes at telecom wavelengths in a 2D double membrane system. Very large and reversible mode tuning (up to 50 nm), both toward shorter or longer wavelength, is obtained for random modes with modal volumes of the order of few tens of (λ/n)3.

We propose a force sensor, with optical detection, based on a reconfigurable multicavity photonic molecule distributed over two parallel photonic crystal membranes. The system spectral behaviour is described with an analytical model based on coupled mode theory and validated by finite difference time domain simulations. The deformation of the upper photonic crystal membrane, due to a localized vertical force, is monitored by the relative spectral positions of the photonic molecule resonances. The proposed system can act both as force sensor, with pico-newton sensitivity, able to identify the position where the force is applied, and as torque sensor able to measure the torsion of the membrane along two perpendicular directions.

Actively controlling the properties of localized optical modes is crucial for cavity quantum electrodynamics experiments. While several methods to tune the optical frequency have been demonstrated, the possibility of controlling the shape of the modes has scarcely been investigated. Yet an active manipulation of the mode pattern would allow direct control of the mode volume and the quality factor and therefore of the radiative processes. In this work, we propose and demonstrate a nano-optoelectromechanical device in which a mechanical displacement affects the spatial pattern of the electromagnetic field. The device is based on a double-membrane photonic crystal waveguide which, upon bending, creates a spatial modulation of the effective refractive index, resulting in an effective potential well or antiwell for the optical modes. The change in the field pattern drastically affects the optical losses: large modulations of the quality factors and dissipative coupling rates larger than 1 GHz/nm are predicted by calculations and confirmed by experiments. This concept opens new avenues in solid-state cavity quantum electrodynamics in which the field, instead of the frequency, is coupled to the mechanical motion.

Quantum photonic integrated circuits (QPICs) on a GaAs platform allow the generation, manipulation, routing, and detection of non-classical states of light, which could pave the way for quantum information processing based on photons. In this article, the prototype of a multi-functional QPIC is presented together with our recent achievements in terms of nanofabrication and integration of each component of the circuit. Photons are generated by excited InAs quantum dots (QDs) and routed through ridge waveguides towards photonic crystal cavities acting as filters. The filters with a transmission of 20% and free spectral range ≥66 nm are able to select a single excitonic line out of the complex emission spectra of the QDs. The QD luminescence can be measured by on-chip superconducting single photon detectors made of niobium nitride (NbN) nanowires patterned on top of a suspended nanobeam, reaching a device quantum efficiency up to 28%. Moreover, two electrically independent detectors are integrated on top of the same nanobeam, resulting in a very compact autocorrelator for on-chip g(2)(τ) measurements.