Search

A dual-output thin-disk picosecond laser operating at 100 W with 1 kHz repetition rate is reported in this Letter. By electronically adjusting the amplitude of the optical seed pulses that are injected into the laser cavity, the energy extracted from the gain medium can be shared between two pulses. Amplified double pulses are subsequently spatially separated into two independent beams by a fast Pockels cell, compressed in one common compressor, and frequency-doubled with ∼70% efficiency. This approach significantly decreases strain on the optics, as well as nonlinear effects, and is advantageous for power scaling.

Thin disk regenerative amplifiers have suitable characteristics to pump picosecond OPCPA. By optimizing the trigger pulse to the MZM, a dual-output laser operating at 100 W, 1 kHz repetition rate, compressed to the transform limit is reported.

We report on the progress in developing a high energy, 1 kHz OPCPA auxiliary laser (F-SYNC) which is intended to supplement the L1-Allegra beamline. The auxiliary pulses are synchronized to the main laser with femtosecond precision and arbitrary delay.

We report on the performance improvements of the L1 Allegra laser system. The pump laser upgrade with the thin-disk multipass amplifier allows for the energy ramp-up, while a newly developed synchronized auxiliary laser system provides the capability of the pump-probe experiments at arbitrary delays.

We report on a 1 kHz, 515 nm laser system, based on a commercially available 230 W average power Yb:YAG thin-disk regenerative amplifier, developed for pumping one of the last optical parametric chirped pulse amplification (OPCPA) stages of the Allegra laser system at ELI Beamlines. To avoid problems with self-focusing of picosecond pulses, the 1030 nm output pulses are compressed and frequency doubled with an LBO crystal in vacuum. Additionally, development of a thermal management system was needed to ensure stable phase matching conditions at high average power. The resulting 515 nm pulses have an energy of more than 120 mJ with SHG efficiency of 60% and an average RMS stability of 1.1% for more than 8 h.

We report on the current state of readiness of the 1 kHz, 15 fs L1 ALLEGRA laser system for long term reliable operation driving user experiments based on HHG. The highly automated system, based on short pulse OPCPA, currently generates pulses with energy of 30 mJ at central wavelength of 820 nm.

We report on the status of the Allegra laser beamline, which is designed to provide ub-20 fs pulses with tens of mJ of energy with exceptionally high contrast at a 1 kHz repetition rate.

We present an active cavity pointing stabilization system based on a novel method that tracks the cavity mode position directly on the thin disk gain medium itself. Here, the overlap of the lasing cavity with the pump, visible as a depletion within the pumped area, is most crucial to the stability of the laser. Short term stability as well as long term stability are significantly increased enabling day long operation, directly from a cold start of the laser system, without the need for thermalization and manual alignment.