Search

Structure-property relations are central to understanding functional materials, and for battery research the use of neutron powder diffraction to reveal the atomistic and molecular-scale origin of battery performance characteristics is often essential. Although operando experiments of this kind are increasingly common as neutron sources and instrumentation advance, these experiments are hindered by the often large barrier presented by the preparation of whole batteries that yield a neutron diffraction signal from the electrode of interest that is sufficient to extract detailed structural information. This article presents a custom battery that is specifically designed for operando neutron powder diffraction. The battery is a pouch type and contains layers of positive and negative electrodes in a parallel-connecting stack. Importantly, the battery can be easily prepared in most laboratories, is configurable, and can be used with both lithium and sodium charge carriers. This paper provides some example operando neutron powder diffraction studies using this battery. [ABSTRACT FROM AUTHOR]

Thestructure of the nanoporous metal–organic frameworkCu3(BTC)2(BTC = 1,3,5-benzenetricarboxylate)with a variety of molecular guests was studied in situusing single crystal X-ray diffraction. By collecting crystal structuredata for a series of guests within the same host crystal, insightsinto the molecular interactions underpinning guest adsorption processeshave been gained. Adsorption behaviors are influenced strongly byboth enthalpic and entropic thermodynamic, as well as interpore steric(size-exclusion) effects, and we note correlations between guest attributesand these effects. Vapor adsorption measurements revealed a guestuptake capacity inversely proportional to guest size. Correspondingly,structural results show that guests reside in the smallest pores accessibleto them. Interpore steric effects for larger guests cause these tobe excluded from the smallest pores, and this corresponds to lowertotal uptake. Both hydrophilic and lipophilic small guests adsorbfavorably into the 5 Å diameter smallest pore of the material,with the number of guests in these pores dependent on guest size andtheir location, in turn dependent upon both guest–guest interactionsand competition between hydrogen-bonding interactions at the aperturesof the smallest pore and lipophilic interactions at the center ofthe smallest pore. Hydrophilic guests with lone electron pairs interactpreferentially with the coordinatively unsaturated Cu sites of thedesolvated framework, with the number of these depending on stericinteractions between neighboring bound guests and guest flexibility.Guest coordination at the Cu sites has a significant effect on theframework structure, increasing the Cu···Cu distancein the dinuclear unit, with the Cu3(BTC)2unitcell being smaller when guests that do not coordinate with the Cuare present, and in the case of cyclohexane, smaller than for thedesolvated framework. Overall, our comprehensive structural studyreconciles Cu3(BTC)2adsorption properties withthe underlying guest–host and guest–guest interactionsthat gives rise to these. [ABSTRACT FROM AUTHOR]

Metal-organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu3(btb)2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE. [ABSTRACT FROM AUTHOR]

Metal-organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu3(btb)2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE. [ABSTRACT FROM AUTHOR]

We used in situ neutron powder diffraction(NPD) to study the migrationof Li in Li4Ti5O12anodes with differentparticle sizes during battery cycling. The motivation of this workwas to uncover the mechanism of the increased capacity of the batterymade with a smaller-particle-sized anode. In real time, we monitoredthe anode lattice parameter, Li distribution, and oxidation stateof the Ti atom, and these suggested an increase in the rate of Liincorporation into the anode rather than a change in the migrationpathway as a result of the particle size reduction. The lattice ofthese anodes during continuous lithiation undergoes expansion followedby a gradual contraction and then expansion again. The measured latticeparameter changes were reconciled with Li occupation at specific siteswithin the Li4Ti5O12crystal structure,where Li migrates from the 8ato 16csites. Despite these similar Li-diffusion pathways, in larger-particle-sizedLi4Ti5O12the population of Li atthe 16csite is accompanied by Li depopulation fromthe 8asite, which is in contrast to the smaller-particle-sizedanode where our results suggest that Li at the 8asite is replenished faster than the rate of transfer of Li to the16csite. Fourier-difference nuclear density mapsof both anodes suggest that 32esites are involvedin the diffusion pathway of Li. NPD is again shown to be an excellenttool for the study of electrode materials for Li-ion batteries, particularlywhen it is used to probe real-time crystallographic changes of thematerials in an operating battery during charge–discharge cycling. [ABSTRACT FROM AUTHOR]

Abstract: In situ neutron powder diffraction measurements of a commercial lithium-ion battery reveal perturbations to the phase evolution of the Li x C6 electrode caused by overcharge. Above ∼4.5 V the anode is entirely composed of LiC6. During discharge from the post-overcharged state LiC6 persists to the 90% discharge state, compared with its persistence to the 27% discharge state during conventional cycling. At the completely discharged state the post-overcharged anode is a mixture of LiC12, LiC18, and graphite, while the conventionally cycled anode is composed of graphite alone. The phase evolution of a post-overcharged battery during charge also differs relative to conventional cycling, most noticeably until the 9% state of charge. [Copyright &y& Elsevier]

Abstract: This work uses real-time in situ neutron powder diffraction to study the electrode lattice response and anode phase evolution in a commercial lithium-ion battery. We show that the time-resolved lattice response of the Li x CoO2 cathode and Li x C6 anode under non-equilibrium conditions varies proportionally with the applied current, where higher current results in faster structural change. Higher current also reduces the Li x CoO2 cathode c lattice parameter and the LiC6 quantity that forms at the charged state of the battery, both of which are related to lower battery capacity. At the anode, we find that the Li x C6 phase evolution is current-dependent. [Copyright &y& Elsevier]

Abstract: The structural response to electrochemical cycling of the components within a commercial Li-ion battery (LiCoO2 cathode, graphite anode) is shown through in situ neutron diffraction. Lithuim insertion and extraction is observed in both the cathode and anode. In particular, reversible Li incorporation into both layered and spinel-type LiCoO2 phases that comprise the cathode is shown and each of these components features several phase transitions attributed to Li content and correlated with the state-of-charge of the battery. At the anode, a constant cell voltage correlates with a stable lithiated graphite phase. Transformation to de-lithiated graphite at the discharged state is characterised by a sharp decrease in both structural cell parameters and cell voltage. In the charged state, a two-phase region exists and is composed of the lithiated graphite phase and about 64% LiC6. It is postulated that trapping Li in the solid|electrolyte interface layer results in minimal structural changes to the lithiated graphite anode across the constant cell voltage regions of the electrochemical cycle. [ABSTRACT FROM AUTHOR]

Abstract: The hydration of Mg-stabilized triclinic and monoclinic tricalcium silicate samples were studied using quasielastic neutron scattering to follow the fixation of hydrogen into the reaction products and by applying hydration models to the data. The quantity of Ca(OH)2 produced during hydration was also determined using inelastic neutron scattering. The monoclinic form was found to be intrinsically less reactive that the triclinic form. The monoclinic form was also confirmed to produce more product than the triclinic form after 50h, a process found to occur through a longer, rather than earlier, nucleation and growth regime. Results indicated an increase in the permeability of the hydration layer product relative to the triclinic form and the increase in the length of the nucleation and growth regime was thus attributed to an alteration in morphology or structure of the hydration layer product, extending the time for diffusion limited mechanics to be reached. [Copyright &y& Elsevier]

Abstract: The effects of NaOH on tricalcium silicate hydration kinetics were investigated using in situ time-resolved quasielastic neutron scattering. NaOH was confirmed to reduce the induction period. After the induction period the rate of products formation is nearly independent of NaOH concentration. However, NaOH suppresses the quantity of hydration products formed, mainly by decreasing the length of the nucleation and growth period, but also because it may cause morphological changes in the hydration products. These effects are commensurate with NaOH concentration, and explain the previously observed reduction in the early strength of tricalcium silicate pastes hydrated in the presence of NaOH. [Copyright &y& Elsevier]

Quasielastic neutron scattering was used to study the hydration reaction of tricalcium and dicalcium silicate mixtures by following the fixation of hydrogen into the reaction products, and by applying hydration models to the data. The reaction kinetics were well-described by an Avrami-derived model for the nucleation and growth regime during early hydration times and a diffusion-limited model for later periods. This study showed that the hydration reaction is not a simple linear combination of the reactions for the individual components. Compressive strength tests correlated with the neutron scattering data, suggesting that the details of the interaction affect the microstructure and therefore the strength of the product. Results suggest that favorable reaction mechanics provide optimal strength when an 80−95% tricalcium silicate and 20−5% dicalcium silicate mixture is used. [ABSTRACT FROM AUTHOR]

The lattice parameters, cell volume, and structure of a sample of phase pure triclinic tricalcium silicate were determined using in situ, high-temperature synchrotron powder diffraction and full-profile Rietveld refinement. The temperature range covered was from ambient to 740 &degC. Evidence of superstructure was found. The T2 type structure with disordered SiO4 tetrahedra was observed, and an average structure for the subcell (P&1macr;, a = 11.7416(2) &Aring, b = 14.2785(2) Å, c = 13.7732(2) Å, α = 105.129(1)°, β = 94.415(1)°, and γ = 89.889(1)°) is presented. Differential thermal analysis and X-ray fluorescence was also performed. [ABSTRACT FROM AUTHOR]

Owing to their vast chemical and structural flexibility, crystalline perovskite-type metal oxides (AB O 3) are amongst the most promising solid electrolytes for use in all-solid-state batteries for large scale energy storage applications. The perovskite-type sodium-ion solid electrolyte series Na 1/2- x La 1/2- x Sr 2 x ZrO 3 have the highest reported ionic conductivities, and we re-examine their room temperature crystal structures using X-ray and high-resolution neutron powder diffraction. In contrast to a previous report, four members of the series, x = 1/16, 1/8, 1/6, and 1/4, were found to adopt orthorhombic symmetry with the space group Pbnm. Variable temperature neutron diffraction data (room temperature to 1100 °C) were used to probe temperature-dependent structural changes for the member of the series with the highest reported ionic conductivity (x = 1/6). A phase transition from orthorhombic Pbnm to tetragonal I 4/ mcm was identified at 800 °C. • The crystal structures of the perovskite-type sodium-ion solid electrolyte series Na 1/2- x La 1/2- x Sr 2 x ZrO 3 were determined. • The x = 1/16, 1/8, 1/6, and 1/4 members adopt orthorhombic symmetry in space group Pbnm instead of cubic P 2 1 3 symmetry. • A phase transition to tetragonal I 4/ mcm at 800 ◦C was found for Na 1/3 La 1/3 Sr 1/3 ZrO 3 using neutron powder diffraction data. • Enhanced understanding of the structure-property relationship informs chemical and structural modifications. [ABSTRACT FROM AUTHOR]

Ion‐exchange materials are commonly composed of polyelectrolyte networks in which crosslinking preserves macroscopic geometry and prevents dissolution in aqueous conditions. However, crosslinking inherently inhibits efficient swelling and mass transfer during ion‐exchange processes. Herein, a one‐step polymerization‐induced microphase separation (PIMS) approach directly using water and linear polystyrene sulfonate macromolecular chain transfer agents (macroCTAs) is developed to engineer bicontinuous nanostructured materials with rapid ion‐exchange capabilities. These materials feature water‐swollen liquid‐like polyelectrolyte domain embedded in a rigid polymer network, where the domain spacing, as determined by small angle X‐ray scattering experiments, is precisely modulated between 15 and 89 nm based on the molecular weight of the macroCTA used. As the bicontinuous nanostructure enables rapid mass transfer throughout the material bulk, the 3D printed PIMS materials are able to rapidly remove model charged dyes from solution, exhibiting a mass transfer coefficient ≈35 times higher than commercially available counterparts. This work is the first example demonstrating direct self‐assembly of water into continuous nanochannels in a well‐controlled manner as supported by time‐resolved small‐angle neutron scattering experiments during polymerization. Moreover, these nanostructured materials are readily produced using commercially available 3D printers, enabling unparalleled high‐resolution fabrication of targeted complex structures, including accurately controllable macroporous geometries and surface areas. [ABSTRACT FROM AUTHOR]

Wadsley‐Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium‐molybdenum oxide shear phase (Nb, Mo)13O33 with superior electrochemical Li‐ion storage performance, including an ultralong cycling lifespan of at least 15000 cycles. During electrochemical cycling, a reversible single‐phase solid‐solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X‐ray diffraction, with the valence and short‐range structural changes of the electrode probed by in situ Nb and Mo K‐edge X‐ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in‐depth understanding of how this stabilizes the oxide structure during cycling with implications for future long‐life battery material design. [ABSTRACT FROM AUTHOR]

Wadsley‐Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium‐molybdenum oxide shear phase (Nb, Mo)13O33 with superior electrochemical Li‐ion storage performance, including an ultralong cycling lifespan of at least 15000 cycles. During electrochemical cycling, a reversible single‐phase solid‐solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X‐ray diffraction, with the valence and short‐range structural changes of the electrode probed by in situ Nb and Mo K‐edge X‐ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in‐depth understanding of how this stabilizes the oxide structure during cycling with implications for future long‐life battery material design. [ABSTRACT FROM AUTHOR]

There are five filter-analyzer neutron spectrometers available worldwide for scientists to use in order to measure the vibrational density of states in various samples. While Taipan, the thermal spectrometer, has been operated as a triple-axis spectrometer at the Australian Centre for Neutron Scattering since 2010, a beryllium filter analyzer spectrometer was added in 2016. Due to the complex nature of the data post-processing, it has thus far been impossible to fully treat experimental data from scientific measurements taken over the last five years. We have successfully created a robust method of treating data from the Taipan filter-analyzer and present the method on three different samples. The data-treatment process includes correction for the non-linear energy variation of a particular monochromator, removal of higher-order wavelength contamination, and estimation of low-energy multiple-scattering. The steps described here can be utilized by all users of the Australian Nuclear Science and Technology Organisation "Be-filter"—past, present, and future. [ABSTRACT FROM AUTHOR]

Despite being the major cause of safety and performance issues in lithium metal batteries, experimental difficulties in quantifying directly the morphology of lithium deposited at electrode surfaces have meant that the mechanism of metallic lithium growth within batteries remains elusive. This study demonstrates that quantitative detail about the morphology of metallic lithium within batteries can be derived non‐destructively and directly using in situ ultra‐small and small‐angle neutron scattering. This information is obtained over a large electrode area in cells where lithium deposition processes are typical of real‐world applications. Complex variations of surface area and interfacial distances 1–10 µm and 100–300 nm are revealed in size that are influenced by current density and cell cycling history, providing valuable insight into the growth of metallic lithium features detrimental to battery performance. Such quantitative insight into the process of lithium growth is required for the development of safer high‐performance lithium metal batteries. [ABSTRACT FROM AUTHOR]

An extended nitro-functionalised 1,2,4-triazole ligand has been used to induce considerable lattice distortion in a 2-D Hofmann framework material via competing supramolecular interactions. Single crystal X-ray diffraction analyses on [Fe3(N-cintrz)6(Pd(CN)4)3]·6H2O (N-cintrz: (E)-3-(2-nitrophenyl)acrylaldehyde) reveal a substantial deviation from a regular Hofmann structure, in particular as the intra- and inter-layer contacts are dominated by hydrogen-bonding interactions rather than the typical π-stacking arrays. Also, the 2-D Hofmann layers show an assortment of ligand conformations and local FeII coordination environments driven by the optimisation of competing supramolecular contacts. Temperature-dependent magnetic susceptibility measurements reveal a two-step spin crossover (SCO) transition. Variable temperature structural analyses show that the two crystallographically distinct FeII centres, which are arranged in stripes (2 : 1 ratio) within each Hofmann layer, undergo a cooperative HS ↔ HS/LS ↔ LS (HS = high spin, LS = low spin) transition without periodic spin-state ordering. The mismatch between crystallographic (2 : 1) and spin-state (1 : 1) periodicity at the HS : LS step provides key insight into the competition (frustration) between elastic interactions and crystallographically driven order. [ABSTRACT FROM AUTHOR]

The article focuses on the synthesis and characterization of a high-entropy oxide (HEO) called Iron(II) Oxide (FeO)-HEO, which contains divalent Manganese (Mn) and Iron (Fe) in a rocksalt crystal structure. Topics include the concept of HEOs and their unique compositional features, the challenge of introducing divalent Mn(II) and Fe(II) into a rocksalt HEO, and the phase stability of FeO-HEO under different conditions.

The reaction evolution and kinetics of the LiFePO 4 positive electrode material is dependent on the synthesis method and cycling conditions. In operando neutron powder diffraction is used investigate the structure-electrochemistry relationship of the electrode materials in a Valence Technology Inc. 18650 Energy cell (IFR18650EC) containing a graphite negative electrode and a Mg-doped LiFePO 4 (Li(MgFe)PO 4 ) positive electrode. Two cells were studied at ambient (298 K) and elevated (323 K) temperature, and higher temperatures were found to improve reaction kinetics and hence capacity. Rietveld refinement of structural models against the diffraction data revealed information about the nucleation of the lithiated and delithiated phases in the Li(MgFe)PO 4 positive electrode material as a function of each cell's state of charge. Polarisation was indicated by a shift in the potential at which the lithiated and delithiated (MgFe)PO 4 phases nucleate during cycling, the extent of which was found to be linearly proportional to the applied current. This work provides new evidence for polarisation of the positive electrode material in a Li-ion battery system. [ABSTRACT FROM AUTHOR]

The article reveals the location of six D2 binding sites in Cu3(BTC)2 using neutron powder diffraction. Researchers also describe an intricate filling order of the framework. Cu3(BTC)2 has a complex three-dimensional channel system. Neutron powder diffraction data are collected on it in a vanadium can using a high-resolution neutron powder diffractometer.

Lithium-rich metal oxides Li1+zMO2 (M = Ni, Co Mn, etc.) are promising positive electrode materials for high-energy lithium-ion batteries, with capacities of 250-300 mAh·g-1 that closely approach theoretical intercalation limits. Unfortunately, these materials suffer severe capacity fade on cycling, among other performance issues. While ion substitution can improve the performance of many of these materials, the underlying mechanisms of property modification are not completely understood. In this work we show enhanced performance of the Li1+zMO2 electrode, consisting of Li2MnO3 (with C2/m space group) and LiMO2 (with R3̄m space group) phases, and establish the effects of cationic and anionic substitution on the phase and structure evolution underpinning performance changes. While the undoped material has a high capacity of ~270 mAh·g-1, only 79% of this remains after 200 cycles. Including ~2% Cr in the material, likely at the R3̄m metal (3a) site, improved cycle performance by ~13%, and including ~5% F in the material, likely at the R3̄m oxygen (6c) site, enhanced capacity by ~4-5% at the expense of a ~12% decline in cycle performance. Moreover, Cr doping enhances energy density retention by ~13%, and F doping suppresses this by 17%. We find that these changes arise by different mechanisms. Both anionic and cationic substitution promote faster Li diffusion, by 48% and 20%, respectively, as determined using cyclic voltammetry and leading to better rate performance. Unlike anionic substitution, cationic substitution enhances structural stability at the expense of some capacity, by suppressing lattice distortion during Li insertion and extraction. This work implicates strategic cationic-anionic codoping for enhanced electrochemical performance in lithium-rich layered metal-oxide phases. [ABSTRACT FROM AUTHOR]

Oxygen‐ion conducting perovskite oxides are important functional materials for solid oxide fuel cells and oxygen‐permeable membranes operating at high temperatures (>500 °C). Co‐doped perovskites have recently shown their potential to boost oxygen‐related kinetics, but challenges remain in understanding the underlying mechanisms. This study unveils the local cation arrangement as a new key factor controlling oxygen kinetics in perovskite oxides. By single‐ and co‐doping Nb5+ and Ta5+ into SrCoO3‐δ, dominant factors affecting oxygen kinetics, such as lattice geometry, cobalt states, and oxygen vacancies, which are confirmed by neutron and synchrotron X‐ray diffraction as well as high‐temperature X‐ray absorption spectroscopy, are controlled. The combined experimental and theoretical study unveils that co‐doping likely leads to higher cation dispersion at the B‐site compared to single‐doping. Consequently, a high‐entropy configuration enhances oxygen ion migration in the lattice, translating to improved oxygen reduction activity. [ABSTRACT FROM AUTHOR]

In operando powder diffraction remains one of the most powerful tools for non‐destructive investigation of battery electrode materials. While in operando X‐ray, especially synchrotron radiation, powder diffraction is by now a routine experimental technique, in operando neutron powder diffraction is still less established. We present a new electrochemical cell for in operando neutron powder diffraction, which is, first and foremost, easy to use, but can also cycle electrode materials under electrochemical conditions close to those achieved using standard laboratory cells. The cell has been designed in multiple sizes, and high‐quality electrochemical and neutron powder diffraction data is presented for sample sizes as low as 48 mg total active material. The cell handles lithium‐ion and sodium‐ion materials equally well, with no difference in how the cell is prepared and assembled. The cell is intended to be used as sample environment at powder diffractometers at the neutron facilities MLZ, ORNL and ACNS. [ABSTRACT FROM AUTHOR]

Metal-organic frameworks (MOFs) are promising solid sorbents, showing gas selectivity and uptake capacities relevant to many important applications, notably in the energy sector. To improve and tailor the sorption properties of these materials for such applications, it is necessary to gain an understanding of their working mechanisms at the atomic and molecular scale. Specifically, it is important to understand how features such as framework porosity, topology, chemical functionality and flexibility underpin sorbent behaviour and performance. Such information is obtained through interrogation of structure-function relationships, with neutron powder diffraction (NPD) being a particularly powerful characterization tool. The combination of NPD with first-principles density functional theory (DFT) calculations enables a deep understanding of the sorption mechanisms, and the resulting insights can direct the future development of MOF sorbents. In this paper, experimental approaches and investigations of two example MOFs are summarized, which demonstrate the type of information and the understanding into their functional mechanisms that can be gained. Such information is critical to the strategic design of new materials with targeted gas-sorption properties. [ABSTRACT FROM AUTHOR]

Oxides composed of an oxygen framework and interstitial cations are promising cathode materials for lithium‐ion batteries. However, the instability of the oxygen framework under harsh operating conditions results in fast battery capacity decay, due to the weak orbital interactions between cations and oxygen (mainly 3d–2p interaction). Here, a robust and endurable oxygen framework is created by introducing strong 4s–2p orbital hybridization into the structure using LiNi0.5Mn1.5O4 oxide as an example. The modified oxide delivers extraordinarily stable battery performance, achieving 71.4 % capacity retention after 2000 cycles at 1 C. This work shows that an orbital‐level understanding can be leveraged to engineer high structural stability of the anion oxygen framework of oxides. Moreover, the similarity of the oxygen lattice between oxide electrodes makes this approach extendable to other electrodes, with orbital‐focused engineering a new avenue for the fundamental modification of battery materials. [ABSTRACT FROM AUTHOR]

Oxides composed of an oxygen framework and interstitial cations are promising cathode materials for lithium‐ion batteries. However, the instability of the oxygen framework under harsh operating conditions results in fast battery capacity decay, due to the weak orbital interactions between cations and oxygen (mainly 3d–2p interaction). Here, a robust and endurable oxygen framework is created by introducing strong 4s–2p orbital hybridization into the structure using LiNi0.5Mn1.5O4 oxide as an example. The modified oxide delivers extraordinarily stable battery performance, achieving 71.4 % capacity retention after 2000 cycles at 1 C. This work shows that an orbital‐level understanding can be leveraged to engineer high structural stability of the anion oxygen framework of oxides. Moreover, the similarity of the oxygen lattice between oxide electrodes makes this approach extendable to other electrodes, with orbital‐focused engineering a new avenue for the fundamental modification of battery materials. [ABSTRACT FROM AUTHOR]

Sodium-ion batteries are the next-generation in battery technology; however, their commercial development is hampered by electrode performance. The P2-type Na2/3(Fe½Mn½)O2 with a hexagonal structure and P63/mmc space group is considered a candidate sodium-ion battery cathode material due to its high capacity (∼190 m Ah·g-1) and energy density (∼520 m Wh·g-1), which are comparable to those of the commercial LiFePO4 and LiMn2O4 lithium-ion battery cathodes, with previously unexplained poor cycling performance being the major barrier to its commercial application. We use operando synchrotron X-ray powder diffraction to understand the origins of the capacity fade of the Na2/3(Fe½Mn½)O2 material during cycling over the relatively wide 1.5-4.2 V (vs Na) window. We found a complex phase-evolution, involving transitions from P63/mmc (P2-type at the open-circuit voltage) to P63 (OP4-type when fully charged) to P63/mmc (P2-type at 3.4-2.0 V) to Cmcm (P2-type at 2.0-1.5 V) symmetry structures during the desodiation and sodiation of the Na2/3(Fe½Mn½)O2 cathode. The associated large cell-volume changes with the multiple two-phase reactions are likely to be responsible for the poor cycling performance, clearly suggesting a 2.0-4.0 V window of operation as a strategy to improve cycling performance. We demonstrated here that the P2-type Na2/3(Fe½Mn½)O2 cathode is able to deliver ∼25% better cycling performance with the strategic operation window. This significant improvement in cycling performance implies that by characterizing the phase evolution and reaction mechanisms during battery function we are able to propose these modifications to the conditions of battery use that improve performance, highlighting the importance of the interplay between structure and electrochemistry. [ABSTRACT FROM AUTHOR]

Abstract: In this study, the application of neutron powder diffraction on studying the time-resolved structural evolution of a cell comprised with LiNi0.5Mn1.5O4 cathode and Li4Ti5O12 anode during charge–discharge cycling is demonstrated. As expected, the lattices of the LiNi0.5Mn1.5O4 cathode and the Li4Ti5O12 anode in the cell are found to simultaneously contract during charging and expand during discharging. It is found that for the LiNi0.5Mn1.5O4 cathode a solid-solution reaction is associated with the lattice change and the Ni2+/Ni3+ redox couple between 3.06 and 3.16 V (vs. Li4Ti5O12), and a two-phase reaction between Li x Ni0.5Mn1.5O4 and Ni0.25Mn0.75O2 is corresponding to the Ni3+/Ni4+ redox couple at voltage higher than 3.22 V (vs. Li4Ti5O12) without a corresponding change in lattice. The oxidation states of the metals in the electrodes are determined by tracking the associated change in the oxygen position. In addition, the Ti oxidation state is correlated to the intensity of the Li4Ti5O12 222 reflection at the anode, and the determined oxidation state of the Ni is correlated to the lithium occupancy within the cathode. Furthermore, the small volume changes of the cathode and the anode upon cycling suggest that the cell chemistry is favorable for practical applications. [Copyright &y& Elsevier]

The steam oxidation resistance of UN and UN-(20 vol%)ZrN fuel pellets is evaluated to enhance understanding of steam corrosion mechanisms in advanced nuclear fuel materials. In situ neutron diffraction shows the modified UN fuel pellets form a (U 0.77 ,Zr 0.23)N solid-solution and the sole crystalline oxidation product detected in bulk is (U 0.77 ,Zr 0.23)O 2. U 2 N 3 is not detected in significant quantities during the steam oxidation of UN or (U 0.77 ,Zr 0.23)N and stable lattice parameters show that hydriding does not take place. Steam oxidation rates, obtained via sequential Rietveld refinement show how (U 0.77 ,Zr 0.23)N has a higher activation energy (79 ± 1 kJmol−1 vs. 50 ± 5 kJmol−1), higher onset temperature (430 °C vs. 400 °C) and slower reaction rates for steam oxidation up to 616 °C, than pure UN. Throughout, both UN and (U 0.77 ,Zr 0.23)N exhibit linear (non-protective) oxidation kinetics, signifying that degradation of the fuel pellets is caused by the evolution of gaseous products at the interface followed by oxide scale spallation. This quantitative and mechanistic understanding of material degradation enables better defined operating regimes and points towards (U,Zr)N solid solutions as a promising strategy for the design of advanced nuclear fuel materials with enhanced steam corrosion resistance. • In situ neutron diffraction measures (U0.77Zr0.23)N and UN steam corrosion. • Rate equations show enhanced steam oxidation resistance for (U0.77Zr0.23)N. • Both (U0.77Zr0.23)N and UN exhibit linear (non-protective) oxidation kinetics. • (U0.77Zr0.23)O2 and UO2 are the only crystalline products detected in bulk. [ABSTRACT FROM AUTHOR]

Abstract: The structures of the defect pyrochlores AAl0.33W1.67O6 where A=K, Rb or Cs have been investigated using X-ray and neutron powder diffraction methods as well as the ab initio modelling program VASP. The three cubic pyrochlores exhibit a non-linear increase in lattice parameter with respect to ionic radius of the A cation as a consequence of displacive disorder of the A-type cations. Solid state 27Al MAS NMR studies of this pyrochlore system reveal shifts in the δ∼21–22ppm range that are indicative of pseudo-5 coordinate Al environments and emanate from distorted Al octahedral with one abnormally long Al–O bond. Solid state 39K, 85Rb, 87Rb and 133Cs MAS and static NMR studies reflect the local cation disorder demonstrated in the structural studies. [Copyright &y& Elsevier]

This study investigated the influence of parent austenite grain refinement on the intervariant boundary network (population and connectivity) in a lath martensitic steel. Parent austenite grain refinement revealed a progressive reduction in the fraction of the 60° misorientation boundaries in martensite, which was linked to a decrease in the 60 ° / [ 110 ] intervariant boundary population. The phenomenological theory of martensite crystallography demonstrated that the variant selection mechanism altered from the 3-variant clustering (V 1 V 3 V 5) in the coarse parent austenite towards the 4-variant clustering (V 1 V 2 V 3 V 4) in the fine parent austenite grain, due to the change in the lattice parameter of the parent and daughter phase in which the martensite transformation occurs, as measured using in situ neutron diffraction. The change in the variant clustering arrangement with the parent austenite grain refinement led to a progressive promotion of 60 ° / [ 111 ] and 10.5 ° / [ 011 ] intervariant boundaries at the expense of 60 ° / [ 110 ] martensite intervariant boundaries. Subsequently, the connectivity of low energy {110} tilt intervariant boundaries gradually increased through the refinement of parent austenite grain size, eventually reducing the high energy {110} twist boundary connectivity. This change improved the impact toughness of martensite produced from the fine-grained austenite as the weak connectivity of high energy boundaries delays the coalescence of voids, promoting ductile fracture. [ABSTRACT FROM AUTHOR]

We report novel calcium-substituted perovskite-type solid state electrolyte with nominal composition Li 0.344 Sr 0.433 Ca 0.02 Ta 3/4 Hf 1/4 O 3 , which we compare with Li 3/8 Sr 7/16 Ta 3/4 Hf 1/4 O 3. The compounds were synthesized via solid-state reaction and studied by X-ray and neutron powder diffraction and electrochemical impedance spectroscopy. Neutron powder diffraction allowed the Li position in the structure to be accurately determined. Calcium-substituted phase showed higher Li-ion conductivity than the analogous calcium-free phase obtained with our synthesis method. High total Li-ion conductivities of 3.6 ± 1.0 × 10−4 S cm−1 (E a = 431 meV) at 30 °C were reached for calcium-substituted phase, and both bulk and grain-boundary conductivities increased compared to that of the calcium-free phase. The same experiment was conducted on Li 0.344 Sr 0.433 Ca 0.02 Ta 3/4 Zr 1/4 O 3 and led to the same conclusion compared to Li 3/8 Sr 7/16 Ta 3/4 Zr 1/4 O 3. Elemental analysis by energy-dispersive X-ray (EDX) of Li 0.344 Sr 0.433 Ca 0.02 Ta 3/4 Hf 1/4 O 3 showed the formation of an intermediary phase at grain boundaries, which contained essentially strontium, calcium, and oxygen. To better understand the increased bulk conductivity, neutron diffraction was performed on Li 0.344 Sr 0.433 Ca 0.02 Ta 3/4 Hf 1/4 O 3. The results demonstrate the importance of understanding and controlling the grain boundary composition, as much as the bulk composition, to improve the total ionic conductivity of solid electrolytes. For table of Contents Only: Enhanced conductivities with calcium-substituted Li 3/8 Sr 7/16 Ta 3/4 Hf 1/4 O 3 perovskite. Thorough structural characterization reveals intermediary phase at grain boundaries. [Display omitted] • A new calcium-substituted perovskite-type electrolyte has been synthetized. • Li-ion conductivity is two times higher than the analogous calcium-free phase. • The Li-ion conductivity of both grain and grain boundary is increased. • Neutron powder diffraction was used to determine the Li positions in the structure. • An intermediary phase at grain boundaries containing calcium is revealed. [ABSTRACT FROM AUTHOR]

We have performed ab initio molecular dynamics simulations to study the alkali-metal dynamics in the Al-doped (KAl0.33W1.67O6 and RbAl0.33W1.67O6) and undoped (KW2O6 and RbW2O6) defect pyrochlore tungstates. The K atoms exhibit novel rattling dynamics in both the doped and undoped tungstates while the Rb atoms do not. The KAl0.33W1.67O6 experimental thermal conductivity curve shows an unusual depression between ~50 K and ~250 K, coinciding with two crossovers in the K dynamics: the first at ~50 K, from oscillatory to diffusive, and the second at ~250 K, from diffusive back to oscillatory. We found that the low-temperature crossover is a result of the system transitioning below the activation energy of the diffusive dynamics, whereas the high-temperature crossover is driven by a complex reconstruction of the local potential around the K atoms due to the cage dynamics. This leads to a hardening of the K potential with increasing temperature. This unusual reconstruction of the potential may have important implications for the interpretation of finite-temperature dynamics based on zero-temperature potentials in similar materials. The key result is that the novel K rattling, involving local diffusion, leads to a significant reduction in the thermal conductivity. We suggest that this may open a new route in the phonon engineering of cage compounds for thermoelectric materials, where the rattlers are specifically selected to reduce the lattice thermal conductivity by the mechanism of local diffusion. [ABSTRACT FROM AUTHOR]

Spinel LiNi0.5Mn1.5O4 (LNMO) is a promising cathode candidate for the next‐generation high energy‐density lithium‐ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site‐selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd3‾ m structure. This site‐selective doping not only suppresses unfavorable two‐phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg‐doped LNMOs exhibit extraordinarily stable electrochemical performance in both half‐cells and prototype full‐batteries with novel TiNb2O7 counter‐electrodes. This work pioneers an atomic‐doping engineering strategy for electrode materials that could be extended to other energy materials to create high‐performance devices. [ABSTRACT FROM AUTHOR]

Spinel LiNi0.5Mn1.5O4 (LNMO) is a promising cathode candidate for the next‐generation high energy‐density lithium‐ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site‐selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd3‾ m structure. This site‐selective doping not only suppresses unfavorable two‐phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg‐doped LNMOs exhibit extraordinarily stable electrochemical performance in both half‐cells and prototype full‐batteries with novel TiNb2O7 counter‐electrodes. This work pioneers an atomic‐doping engineering strategy for electrode materials that could be extended to other energy materials to create high‐performance devices. [ABSTRACT FROM AUTHOR]

LiCoO2 (LCO) with average particle distribution of 8 μm (LCO‐A) and 11 μm (LCO‐B) exhibit substantial differences in cycle performance. The half‐cells have similar first‐cycle discharge capacities of 173 and 175 mAh/g at 0.25 C, but after 100 cycles, the discharge capacities are substantially different, that is, 114 and 141 mAh/g for LCO‐A and LCO‐B, respectively. Operando neutron powder diffraction of full LCO||Li4Ti5O12 batteries show differences in the LCO reaction mechanism underpinning the electrochemical behavior. LCO‐A follows a purely solid solution reaction during cycling compared to the solid solution and two‐phase reaction mechanism in LCO‐B. The absence of the two‐phase reaction in LCO‐A is consistent with a homogeneous distribution of Li throughout the particle. The two‐phase reaction in LCO‐B reflects two distinguishable distributions of Li within the particles. The faster capacity decay in LCO‐A is correlated to an increase in electrode cracking during battery cycles. [ABSTRACT FROM AUTHOR]

Existing lithium-ion battery technology is struggling to meet our increasing requirements for high energy density, long lifetime, and low-cost energy storage. Here, a hybrid electrode design is developed by a straightforward reengineering of commercial electrode materials, which has revolutionized the "rocking chair" mechanism by unlocking the role of anions in the electrolyte. Our proof-of-concept hybrid LiFePO4 (LFP)/graphite electrode works with a staged deintercalation/intercalationmechanismof Li+ cations and PF6 - anions in a broadened voltage range, which was thoroughly studied by ex situ X-ray diffraction, ex situ Raman spectroscopy, and operando neutron powder diffraction. Introducing graphite into the hybrid electrode accelerates its conductivity, facilitating the rapid extraction/insertion of Li+ from/into the LFP phase in 2.5 to 4.0 V. This charge/discharge process, in turn, triggers the in situ formation of the cathode/electrolyte interphase (CEI) layer, reinforcing the structural integrity of the whole electrode at high voltage. Consequently, this hybrid LFP/graphite-20% electrode displays a high capacity and long-term cycling stability over 3,500 cycles at 10 C, superior to LFP and graphite cathodes. Importantly, the broadened voltage range and high capacity of the hybrid electrode enhance its energy density, which is leveraged further in a full-cell configuration. [ABSTRACT FROM AUTHOR]

Reaction of the chloranilate dianion with Y(NO3)3 in the presence of Et4N+ in the appropriate proportions results in the formation of (Et4N)[Y(can)2], which consists of anionic square‐grid coordination polymer sheets with interleaved layers of counter‐cations. These counter‐cations, which serve as squat pillars between [Y(can)2] sheets, lead to alignment of the square grid sheets and the subsequent generation of square channels running perpendicular to the sheets. The crystals are found to be porous and retain crystallinity following cycles of adsorption and desorption. This compound exhibits a high affinity for volatile guest molecules, which could be identified within the framework by crystallographic methods. In situ neutron powder diffraction indicates a size‐shape complementarity leading to a strong interaction between host and guest for CO2 and CH4. Single‐crystal X‐ray diffraction experiments indicate significant interactions between the host framework and discrete I2 or Br2 molecules. A series of isostructural compounds (cat)[MIII(X‐an)2] with M=Sc, Gd, Tb, Dy, Ho, Er, Yb, Lu, Bi or In, cat=Et4N, Me4N and X‐an=chloranilate, bromanilate or cyanochloranilate bridging ligands have been generated. The magnetic properties of representative examples (Et4N)[Gd(can)2] and (Et4N)[Dy(can)2] are reported with normal DC susceptibility but unusual AC susceptibility data noted for (Et4N)[Gd(can)2]. An extensive family of square grid anionic coordination polymers is formed by the combination of 8‐coordinate trivalent metal ions with bridging chloranilate ligands. Alignment of the square grid networks produces channels that are able to accommodate a variety species. The location of guest molecules within the channels has been determined using both X‐ray and neutron diffraction. [ABSTRACT FROM AUTHOR]

Invited for this month's cover is the group of Daniel R. Sørensen at the University of Aarhus (Denmark) and at the University of Lund (Sweden). The cover picture shows a battery cell designed for in operando neutron powder diffraction. The picture seeks to illustrate the experiment process where lithium ions are moving into the crystal structure of the battery cathode during discharge. This leads to changes in the crystal structure that are very important to understand for optimizing the battery materials. These structural changes are probed in operando by neutron powder diffraction, and neutrons are especially suited for probing the location of Li‐ion compared with similar techniques such as X‐ray diffraction. The beauty of using neutrons is also that their penetrating power allows for investigating the battery without the need for windows of any kind. Read the full text of their Research Article at 10.1002/cmtd.202200046. [ABSTRACT FROM AUTHOR]

Abstract: The interdependent effects of temperature and guest uptake on the structure of the ultramicroporous metal–organic framework [Cu3(cdm)4] (cdm=C(CN)2(CONH2)−) were explored in detail by using in situ neutron scattering and density functional theory calculations. The tetragonal lattice displays an anisotropic thermal response related to a hinged “lattice‐fence” mechanism, unusual for this topology, which is facilitated by pivoting of the rigid cdm anion about the Cu nodes. Calculated pore‐size metrics clearly illustrate the potential for temperature‐mediated adsorption in ultramicroporous frameworks due to thermal fluctuations of the pore diameter near the value of the target guest kinetic diameter, though in [Cu3(cdm)4] this is counteracted by a competing contraction of the pore with increasing temperature as a result of the anisotropic lattice response. [ABSTRACT FROM AUTHOR]

Commercial 18650 lithium ion cells containing a blended positive electrode of layered LiNi 0.5 Mn 0.3 Co 0.2 O 2 and spinel Li 1.1 Mn 1.9 O 4 alongside a graphite negative electrode were stored at various depth-of-discharge (DoD) at 60 °C for 1, 2, 4, and 6 months. After storage, the cells were cycled at C/25 at 25 °C between 2.75 and 4.2 V for capacity determination and incremental capacity analysis (ICA). In addition to ICA analysis, the mechanism for capacity fade was investigated by combining the results of neutron powder diffraction under in-situ and operando conditions, in conjunction with post-mortem studies of the electrodes using synchrotron X-ray powder diffraction and inductively-coupled plasma optical emission spectroscopy. Among the cells, those stored at 25% DoD suffered the highest capacity fade due to their higher losses of active Li, NMC, and LMO than cells stored at other DoD. The cells stored at 0% DoD shows second high capacity fade because they exhibit the highest of active LMO and graphite anode among the stored cells and higher losses of active Li and NMC than cells stored at 50% DoD. [ABSTRACT FROM AUTHOR]

In this work lithium self-diffusion in the model lithium garnet oxide Li 5 La 3 Ta 2 O 12 was investigated by combining quasi-elastic neutron scattering experiments and molecular dynamics simulation. The Q -dependence of the quasi-elastic broadening measured experimentally and of the mean relaxation rate of lithium calculated by molecular dynamics simulations were both well described by the Singwi-Sjölander diffusion model. This model describes lithium nuclei that undergo diffusion via a jump-type mechanism consisting of a distribution of jumps with a mean square jump distance and residence time. The extracted mean jump length is consistent with a jump between tetrahedral (24 d ) to octahedral (48 g and 96 h ) sites within the I a 3 ¯ d symmetry structure and the residence time of Li at these sites obeys an Arrhenius relation from ~ ps timescales at 1100 K to the ~ ns range at 400 K. This result supports a lithium diffusion mechanism in which jumps are more frequent (smaller residence time) and shorter at higher temperature. The self-diffusivities of Li from both experiment and calculation were in good agreement, but deviations from those previously measured using nuclear magnetic resonance and muon spin relaxation were observed and discussed. Analysis of stretching parameter describing the relaxation of lithium calculated by molecular dynamics indicated that Li motion is more cooperative at shorter length scales, below ~ 4.4 Å, which corresponds to the distance between octahedral sites across the tetrahedral site. [ABSTRACT FROM AUTHOR]

In situ neutron powder diffraction experiments are applied to physical, kinetic, and microstructural characterization of uranium mononitride as a promising light water reactor fuel material. The temperature-variable coefficient of thermal expansion and isotropic Debye Waller factors are obtained by sequential Rietveld refinement over 499–1873 K. Oxidation of a UN pellet (95.2% density) under flow of 11 mg/min D 2 O is observed to initiate above 623 K and the rate increases by a factor of approximately 10 from 673 to 773 K, with activation energy 50.6 ± 1.3 kJ/mol; uranium oxide is the only solid corrosion product. [ABSTRACT FROM AUTHOR]

Li-rich metal oxides, regarded as a high-voltage composite cathode, is currently one of the hottest positive electrode material for lithium-ion batteries, due to its high-capacity and high-energy performance. The crystallography, phase composition and morphology can be altered by synthesis parameters, which can influence drastically the capacity and cycling performance. In this work, we demonstrate Li 1.207 Ni 0.127 Mn 0.54 Co 0.127 O 2 , obtained by a co-precipitation method, exhibits super-high specific capacity up to 298 mAh g −1 and excellent capacity retention of ∼100% up to 50 cycles. Using neutron powder diffraction and transmission X-ray microscopy, we have found that the cooling-treatments applied after sintering during synthesis are crucially important in controlling the phase composition and morphology of the cathodes, thereby influencing the electrochemical performance. Unique spherical microstructure, larger lattice, and higher content of Li-rich monoclinic component can be achieved in the rapid quenching process, whereas severe particle cracking along with the smaller lattice and lower monoclinic component content is obtained when natural cooling of the furnace is applied. Combined with electrochemical impedance spectra, a plausible mechanism is described for the poorer specific capacity and cycling stability of the composite cathodes. [ABSTRACT FROM AUTHOR]

Ex situ and time-resolved in operando neutron powder diffraction (NPD) has been used to study the structural evolution of the graphite negative electrode and LiFePO 4 positive electrode within ANR26650M1A commercial batteries from A123 Systems, in what to our knowledge is the first reported NPD study investigating a 26650-type battery. Batteries with different and accurately-known electrochemical and storage histories were studied, enabling the tell-tale signs of battery degradation to be elucidated using NPD. The ex-situ NPD data revealed that the intensity of the graphite/lithiated graphite (Li x C 6 or Li y C) reflections was affected by battery history, with lower lithiated graphite (LiC 12 ) reflection intensities typically corresponding to more abused batteries. This indicates that the lithiation of graphite is less progressed in more abused batteries, and hence these batteries have lower capacities. In operando NPD allows the rate of structural evolution in the battery electrode materials to be correlated to the applied current. Interestingly, the electrodes exhibit different responses to the applied current that depend on the battery cycling history, with this particularly evident for the negative electrode. Therefore, this work illustrates how NPD can be used to correlate a battery history with electrode structure. [ABSTRACT FROM AUTHOR]

Y(btc) (btc = 1,3,5-benzenetricarboxylate) is a metal-organic framework that exhibits significant adsorption of industrially-relevant gases such as H2, CH4, and O2. Previous studies have noted a surprising lack of close interactions between the adsorbed guest molecules and Y, despite the apparent availability of a "bare-metal" binding site. We have extended our previous work in a detailed investigation of the adsorption behaviours of CO2, CD4, and O2 in Y(btc) over a range of concentrations using in situ neutron powder diffraction methods. The O-Y-O bond angles enclosing the bare-metal site are found to change considerably depending on the type and quantity of guest molecules present. Multiple binding sites are found for each guest species, and the largest changes in O-Y-O angles are accompanied by changes in the filling sequences of the binding sites, pointing to an important interplay between guest-induced framework distortions and binding site accessibility. These results suggest the potential for coordinatively flexible rare-earth metal centres to promote guest-selective binding in metal-organic frameworks. [ABSTRACT FROM AUTHOR]