Search

The future upgrade of Keck II telescope's adaptive optics system will include a pyramid wavefront sensor working in the near-infrared (J and H band). It will benefit from the recently developed avalanche photodiode arrays, specifically the SAPHIRA (Selex) array, which provides a low noise ($

The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction-limited, high-resolution ($R>30,000$) spectroscopy of exoplanets and low-mass companions in the K and L bands. Phase I consisted of single-mode fiber injection/extraction units (FIU/FEU) used in conjunction with an H-band pyramid wavefront sensor. Phase II, deployed and commissioned in 2022, adds a 1000-actuator deformable mirror, beam-shaping optics, a vortex coronagraph, and other upgrades to the FIU/FEU. The use of single-mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line-spread function on the spectrograph. In this paper we present the results of extensive system-level laboratory testing and characterization showing the instrument's Phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We also demonstrate the capabilities of the various observing modes enabled by the new system modules using internal test light sources. Finally, we show preliminary results of on-sky tests performed in the first few months of Phase II commissioning along with the next steps for the instrument. Once commissioning of Phase II is complete, KPIC will continue to characterize exoplanets at an unprecedented spectral resolution, thereby growing its already successful track record of 23 detected exoplanets and brown dwarfs from Phase I. Using the new vortex fiber nulling (VFN) mode, Phase II will also be able to search for exoplanets at small angular separations less than 45 milliarcseconds which conventional coronagraphs cannot reach., 13 pages; 6 figures; to appear in Proceedings of the SPIE, Ground-based and Airborne Instrumentation for Astronomy IX, Vol. 12184

Direct imaging studies have mainly used low-resolution spectroscopy ($R\sim20-100$) to study the atmospheres of giant exoplanets and brown dwarf companions, but the presence of clouds has often led to degeneracies in the retrieved atmospheric abundances (e.g. C/O, metallicity). This precludes clear insights into the formation mechanisms of these companions. The Keck Planet Imager and Characterizer (KPIC) uses adaptive optics and single-mode fibers to transport light into NIRSPEC ($R\sim35,000$ in $K$ band), and aims to address these challenges with high-resolution spectroscopy. Using an atmospheric retrieval framework based on petitRADTRANS, we analyze KPIC high-resolution spectrum ($2.29-2.49~\mu$m) and archival low-resolution spectrum ($1-2.2~\mu$m) of the benchmark brown dwarf HD 4747 B ($m=67.2\pm1.8~M_{\rm{Jup}}$, $a=10.0\pm0.2$ au, $T_{\rm eff}\approx1400$ K). We find that our measured C/O and metallicity for the companion from the KPIC high-resolution spectrum agree with that of its host star within $1-2\sigma$. The retrieved parameters from the $K$ band high-resolution spectrum are also independent of our choice of cloud model. In contrast, the retrieved parameters from the low-resolution spectrum are highly sensitive to our chosen cloud model. Finally, we detect CO, H$_2$O, and CH$_4$ (volume mixing ratio of log(CH$_4$)=$-4.82\pm0.23$) in this L/T transition companion with the KPIC data. The relative molecular abundances allow us to constrain the degree of chemical disequilibrium in the atmosphere of HD 4747 B, and infer a vertical diffusion coefficient that is at the upper limit predicted from mixing length theory., Comment: 33 pages, 16 figures, Accepted to ApJ

We present an analysis of the long-term performance of the W. M. Keck observatory laser guide star adaptive optics (LGS-AO) system and explore factors that influence the overall AO performance most strongly. Astronomical surveys can take years or decades to finish, so it is worthwhile to characterize the AO performance on such timescales in order to better understand future results. The Keck telescopes have two of the longest-running LGS-AO systems in use today, and as such they represent an excellent test-bed for processing large amounts of AO data. We use a Keck-II near infrared camera 2 (NIRC2) LGSAO surve of the Galactic Center (GC) from 2005 to 2019 for our analysis, combining image metrics with AO telemetry files, multiaperture scintillation sense/differential imaging motion monitor turbulence profiles, seeing information, weather data, and temperature readings in a compiled dataset to highlight areas of potential performance improvement. We find that image quality trends downward over time, despite multiple improvements made to Keck-II and its AO system, resulting in a 9 mas increase in the average full width at half maximum (FWHM) and a 3% decrease in the average Strehl ratio over the course of the survey. Image quality also trends upward with ambient temperature, possibly indicating the presence of uncorrected turbulence in the beam path. Using nine basic features from our dataset, we train a simple machine learning (ML) algorithm to predict the delivered image quality of NIRC2 given current atmospheric conditions, which could eventually be used for real-time observation planning and exposure time adjustments. A random forest algorithm trained on this data can predict the Strehl ratio of an image to within 18% and the FWHM to within 7%, which is a solid baseline for future applications involving more advanced ML techniques. The assembled dataset and coding tools are released to the public as a resource for testing new predictive control and point spread function-reconstruction algorithms.

We present the results from our predictive wavefront control algorithm tested using the near-infrared pyramid wavefront sensor on the Keck II adaptive optics (AO) bench. The algorithm aims to minimise the servo-lag error of the AO system. We compare the achieved contrast for a vortex coronagraph for both the predictive control algorithm and the standard integral control law.

We establish a viable laser payload design for the Orbiting Configurable Artificial Star (ORCAS) mission. We share observational considerations and derive the engineering requirements for the laser payload. Developed by general Atomics Electromagnetic Systems, the dual-wavelength laser will operate at 1064 nm and can be frequency-doubled to 532 nm, with two possible beam divergence modes and tunable power. The laser payload can be operated at pulse repetition rates greater than 10 kHz to enable compatibility with Adaptive Optics systems and to maintain pointing requirements. We show that such a laser payload can be constructed based upon a high-TRL amplified fiber laser Communication Terminal modified to meet the mission requirements.

The Keck Planet Imager and Characterizer (KPIC) is a purpose-built instrument to demonstrate technological and instrumental concepts initially developed for the exoplanet direct imaging field. Located downstream of the current Keck II adaptive optic (AO) system, KPIC contains a fiber injection unit (FIU) capable of combining the high-contrast imaging capability of the AOs system with the high dispersion spectroscopy capability of the current Keck high resolution infrared spectrograph (NIRSPEC). Deployed at Keck in September 2018, this instrument has already been used to acquire high-resolution spectra (R > 30,000) of multiple targets of interest. In the near term, it will be used to spectrally characterize known directly imaged exoplanets and low-mass brown dwarf companions visible in the northern hemisphere with a spectral resolution high enough to enable spin and planetary radial velocity measurements as well as Doppler imaging of atmospheric weather phenomena. Here, we present the design of the FIU, the unique calibration procedures needed to operate a single-mode fiber instrument and the system performance.

An Adaptive secondary mirror (ASM) allows for the integration of adaptive optics (AO) into the telescope itself. Adaptive secondary mirrors, based on hybrid variable reluctance (HVR) actuator technology, developed by TNO, provide a promising path to telescope-integrated AO. HVR actuators have the advantage of allowing mirrors that are stiffer, more power efficient, and potentially less complex than similar, voice-coil based ASM's. We are exploring the application of this technology via a laboratory testbed that will validate the technical approach. In parallel, we are developing conceptual designs for ASMs at several telescopes including the Automated Planet Finder Telescope (APF) and for Keck Observatory. An ASM for APF has the potential to double the light through the slit for radial velocity measurements, and dramatically improved the image stability. An ASM for WMKO enables ground layer AO correction and lower background infrared AO observations, and provides for more flexible deployment of instruments via the ability to adjust the location of the Cassegrain focus., Comment: 16 pages, Proceedings of SPIE

We present the status and plans for the Keck All sky Precision Adaptive optics (KAPA) program. KAPA includes four key science programs, an upgrade to the Keck I laser guide star (LGS) adaptive optics (AO) facility to improve image quality and sky coverage, AO telemetry based point spread function (PSF) estimates for all science exposures, and an educational component focused on broadening the participation of women and underrepresented groups in instrumentation. For the purpose of this conference we will focus on the AO facility upgrade which includes implementation of a new laser, wavefront sensor and real-time controller to support laser tomography, the laser tomography system itself, and modifications to an existing near-infrared tip-tilt sensor to support multiple natural guide star (NGS) and focus measurements.

The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, high-stability spectrometer in development at the UC Berkeley Space Sciences Laboratory for the W.M. Keck Observatory. KPF is designed to characterize exoplanets via Doppler spectroscopy with a goal of a single measurement precision of 0.3 m s-1 or better, however its resolution and stability will enable a wide variety of astrophysical pursuits. Here we provide post-preliminary design review design updates for several subsystems, including: the main spectrometer, the fabrication of the Zerodur optical bench; the data reduction pipeline; fiber agitator; fiber cable design; fiber scrambler; VPH testing results and the exposure meter.

High-precision astrometry has the potential to address questions in planet formation, black hole science, Galactic structure, and more. However, in order to achieve a precision of sub-milli arcseconds (mas), we need a calibration method better than the current techniques such as on-sky calibration using calibrated stellar or stellar cluster systems, which have a precision of $sim$ 1 mas. Precision calibration unit with a regular grid of photo-lithographically manufactured pinholes combined with self-calibration techniques, on the other hand, is a new and innovative way to potentially achieve a precision of sub-mas over the entire field of view. This technique is beneficial to adaptive optic (AO) instruments for future telescopes like the Thirty Meter Telescope (TMT). In this work, we present our design for a new astrometric calibration unit to feed the NIRC2 AO instrument at the W. M. Keck Observatory. It allows calibration over a large field of view of $47^{''} times 47^{''}$, spat

W. M. Keck Observatory (WMKO) has granted in 2018 to Microgate, supported by Swinburne University and Australian National University, the contract for the design, implementation and test of the new Adaptive Optics Real Time Controller. The new system is going to replace the existing Keck Next Generation Wavefront Controller (NGWFC), delivered by the same company 14 years ago and still operational. The new RTC supports, on a smaller scale, most of the operating modii that are planned for the next generation of ELT RTCs, including laser tomography. In addition, the system needs to be interfaced to several wavefront cameras and mirrors, with heterogeneous interfaces. On that base, the system needs to conjugate several aspects, including flexible interfacing, computational throughput with low latency and minimum jitter, large telemetry storage capacity with fast querying capacity, easiness of maintainability, expandability, extreme reliability and environmental challenges to operate at 4,200 meters above the sea level. The proposed architecture comprehends an interface module, physically located close to the various sensors and mirrors, a computational unit based on GPUs and a storage server. The software implementation is based on a modular concept that starts from the COMPASS framework, developed at Observatoire de Paris, and supports easy expandability. The project implementation is almost completed and deployment to the telescope is planned for Q1/2021.

The Keck Planet Imager and Characterizer (KPIC) is a purpose-built instrument for high-dispersion coronagraphy in the K and L bands on Keck. This instrument will provide the first high resolution (R>30,000) spectra of known directly imaged exoplanets and low-mass brown dwarf companions visible in the northern hemisphere. KPIC is developed in phases. Phase I is currently at Keck in the early operations stage, and the phase II upgrade will deploy in late 2021. The goal of phase II is to maximize the throughput for planet light and minimize the stellar leakage, hence reducing the exposure time needed to acquire spectra with a given signal-to- noise ratio. To achieve this, KPIC phase II exploits several innovative technologies that have not been combined this way before. These include a 1000-element deformable mirror for wavefront correction and speckle control, a set of lossless beam shaping optics to maximize coupling into the fiber, a pupil apodizer to suppress unwanted starlight, a pupil plane vortex mask to enable the acquisition of spectra at and within the diffraction limit, and an atmospheric dispersion compensator. These modules, when combined with the active fiber injection unit present in phase I, will make for a highly efficient exoplanet characterization platform. In this paper, we will present the final design of the optics and opto-mechanics and highlight some innovative solutions we implemented to facilitate all the new capabilities. We will provide an overview of the assembly and laboratory testing of the sub-modules and some of the results. Finally, we will outline the deployment timeline.

The Keck Planet Imager and Characterizer (KPIC) is a purpose-built instrument to demonstrate new tech- nological and instrumental concepts initially developed for the exoplanet direct imaging field. Located downstream of the current Keck II adaptive optic system, KPIC contains a fiber injection unit (FIU) capable of combining the high-contrast imaging capability of the adaptive optic system with the high dispersion spectroscopy capability of the current Keck high resolution infrared spectrograph (NIRSPEC). Deployed at Keck in September 2018, this instrument has already been used to acquire high resolution spectra (R < 35, 000) of multiple targets of interest. In the near term, it will be used to spectrally characterize known directly imaged exoplanets and low-mass brown dwarf companions visible in the northern hemisphere with a spectral resolution high enough to enable spin and planetary radial velocity measurements as well as Doppler imaging of atmospheric weather phenomena. Here we present the design of the FIU, the unique calibration procedures needed to operate a single-mode fiber instrument and the system performance.

International audience; Determining the PSF remains a key challenge for post adaptive-optics (AO) observations regarding the spatial, temporal and spectral variabilities of the AO PSF, as well as itx complex structure. This paper aims to provide a non-exhaustive but classified list of techniques and references that address this issue of PSF determination, with a particular scope on PSF reconstruction, or more generally pupil-plane-based approaches. We have compiled a large amount of references to synthesize the main messages and kept them at a top level. We also present applications of PSF reconstruction/models to post-processing, more especially PSF-fitting and deconvolution for which there is a fast progress in the community.

International audience; The study of cold or obscured, red astrophysical sources can significantly benefit from adaptive optics (AO) systems employing infrared (IR) wavefront sensors. One particular area is the study of exoplanets around M-dwarf stars and planet formation within protoplanetary disks in star-forming regions. Such objects are faint at visible wavelengths but bright enough in the IR to be used as a natural guide star for the AO system. Doing the wavefront sensing at IR wavelengths enables high-resolution AO correction for such science cases, with the potential to reach the contrasts required for direct imaging of exoplanets. To this end, a new near-infrared pyramid wavefront sensor (PyWFS) has been added to the Keck II AO system, extending the performance of the facility AO system for the study of faint red objects. We present the Keck II PyWFS, which represents a number of firsts, including the first PyWFS installed on a segmented telescope and the first use of an IR PyWFS on a 10-m class telescope. We discuss the scientific and technological advantages offered by IR wavefront sensing and present the design and commissioning of the Keck PyWFS. In particular, we report on the performance of the Selex Avalanche Photodiode for HgCdTe InfraRed Array detector used for the PyWFS and highlight the novelty of this wavefront sensor in terms of the performance for faint red objects and the improvement in contrast. The system has been commissioned for science with the vortex coronagraph in the NIRC2 IR science instrument and is being commissioned alongside a new fiber injection unit for NIRSPEC. We present the first science verification of the system-to facilitate the study of exoplanets around M-type stars.

A benchmark brown dwarf (BD) is a BD whose properties (e.g., mass and chemical composition) are precisely and independently measured. Benchmark BDs are valuable in testing theoretical evolutionary tracks, spectral synthesis, and atmospheric retrievals for sub-stellar objects. Here, we report results of atmospheric retrieval on a synthetic spectrum and a benchmark BD -- HR 7672~B -- with \petit. First, we test the retrieval framework on a synthetic PHOENIX BT-Settl spectrum with a solar composition. We show that the retrieved C and O abundances are consistent with solar values, but the retrieved C/O is overestimated by 0.13-0.18, which is $\sim$4 times higher than the formal error bar. Second, we perform retrieval on HR 7672~B using high spectral resolution data (R=35,000) from the Keck Planet Imager and Characterizer (KPIC) and near infrared photometry. We retrieve [C/H], [O/H], and C/O to be $-0.24\pm0.05$, $-0.19\pm0.04$, and $0.52\pm0.02$. These values are consistent with those of HR 7672~A within 1.5-$\sigma$. As such, HR 7672~B is among only a few benchmark BDs (along with Gl 570~D and HD 3651~B) that have been demonstrated to have consistent elemental abundances with their primary stars. Our work provides a practical procedure of testing and performing atmospheric retrieval, and sheds light on potential systematics of future retrievals using high- and low-resolution data., Comment: 29 pages, 17 figures, 5 tables, resubmitted to AAS journals after first revision

Using the Keck Planet Imager and Characterizer (KPIC), we obtained high-resolution (R$\sim$35,000) $K$-band spectra of the four planets orbiting HR 8799. We clearly detected \water{} and CO in the atmospheres of HR 8799 c, d, and e, and tentatively detected a combination of CO and \water{} in b. These are the most challenging directly imaged exoplanets that have been observed at high spectral resolution to date when considering both their angular separations and flux ratios. We developed a forward modeling framework that allows us to jointly fit the spectra of the planets and the diffracted starlight simultaneously in a likelihood-based approach and obtained posterior probabilities on their effective temperatures, surface gravities, radial velocities, and spins. We measured $v\sin(i)$ values of $10.1^{+2.8}_{-2.7}$~km/s for HR 8799 d and $15.0^{+2.3}_{-2.6}$~km/s for HR 8799 e, and placed an upper limit of $< 14$~km/s of HR 8799 c. Under two different assumptions of their obliquities, we found tentative evidence that rotation velocity is anti-correlated with companion mass, which could indicate that magnetic braking with a circumplanetary disk at early times is less efficient at spinning down lower mass planets., 31 pages, 12 figures, Accepted to AJ

We present $L$'-band imaging of the PDS 70 planetary system with Keck/NIRC2 using the new infrared pyramid wavefront sensor. We detected both PDS 70 b and c in our images, as well as the front rim of the circumstellar disk. After subtracting off a model of the disk, we measured the astrometry and photometry of both planets. Placing priors based on the dynamics of the system, we estimated PDS 70 b to have a semi-major axis of $20^{+3}_{-4}$~au and PDS 70 c to have a semi-major axis of $34^{+12}_{-6}$~au (95\% credible interval). We fit the spectral energy distribution (SED) of both planets. For PDS 70 b, we were able to place better constraints on the red half of its SED than previous studies and inferred the radius of the photosphere to be 2-3~$R_{Jup}$. The SED of PDS 70 c is less well constrained, with a range of total luminosities spanning an order of magnitude. With our inferred radii and luminosities, we used evolutionary models of accreting protoplanets to derive a mass of PDS 70 b between 2 and 4 $M_{\textrm{Jup}}$ and a mean mass accretion rate between $3 \times 10^{-7}$ and $8 \times 10^{-7}~M_{\textrm{Jup}}/\textrm{yr}$. For PDS 70 c, we computed a mass between 1 and 3 $M_{\textrm{Jup}}$ and mean mass accretion rate between $1 \times 10^{-7}$ and $5 \times~10^{-7} M_{\textrm{Jup}}/\textrm{yr}$. The mass accretion rates imply dust accretion timescales short enough to hide strong molecular absorption features in both planets' SEDs., Comment: 20 pages, 5 figures, Accepted to AJ. Updated author list from original version. Fixed equation typo

The Keck Planet Imager and Characterizer comprises of a series of upgrades to the Keck II adaptive optics system and instrument suite to improve the direct imaging and high resolution spectroscopy capabilities of the facility instruments NIRC2 and NIRSPEC, respectively. Phase I of KPIC includes a NIR pyramid wavefront sensor and a Fiber Injection Unit (FIU) to feed NIRSPEC with a single mode fiber, which have already been installed and are currently undergoing commissioning. KPIC will enable High Dispersion Coronagraphy (HDC) of directly imaged exoplanets for the first time, providing potentially improved detection significance and spectral characterization capabilities compared to direct imaging. In favorable cases, Doppler imaging, spin measurements, and molecule mapping are also possible. This science goal drives the development of phase II of KPIC, which is scheduled to be deployed in early 2020. Phase II optimizes the system throughput and contrast using a variety of additional submodules, including a 952 element deformable mirror, phase induced amplitude apodization lenses, an atmospheric dispersion compensator, multiple coronagraphs, a Zernike wavefront sensor, and multiple science ports. A testbed is being built in the Exoplanet Technology Lab at Caltech to characterize and test the design of each of these submodules before KPIC phase II is deployed to Keck. This paper presents an overview of the design of phase II and report on results from laboratory testing., 12 pages; 11 figures; to appear in Proceedings of the SPIE, Techniques and Instrumentation for Detection of Exoplanets IX, Vol. 11117

The Keck Planet Imager and Characterizer (KPIC) is an upgrade to the Keck II adaptive optics system enabling high contrast imaging and high-resolution spectroscopic characterization of giant exoplanets in the mid-infrared (2-5 microns). The KPIC instrument will be developed in phases. Phase I entails the installation of an infrared pyramid wavefront sensor (PyWFS) based on a fast, low-noise SAPHIRA IR-APD array. The ultra-sensitive infrared PyWFS will enable high contrast studies of infant exoplanets around cool, red, and/or obscured targets in star forming regions. In addition, the light downstream of the PyWFS will be coupled into an array of single-mode fibers with the aid of an active fiber injection unit (FIU). In turn, these fibers route light to Keck's high-resolution infrared spectrograph NIRSPEC, so that high dispersion coronagraphy (HDC) can be implemented for the first time. HDC optimally pairs high contrast imaging and high-resolution spectroscopy allowing detailed characterization of exoplanet atmospheres, including molecular composition, spin measurements, and Doppler imaging. We will provide an overview of the instrument, its science scope, and report on recent results from on-sky commissioning of Phase I. We will discuss plans for optimizing the instrument to seed designs for similar modes on extremely large telescopes.

In order to enhance the scientific exploitation of adaptive optics (AO)-assisted observations, we investigate a novel hybrid concept to improve the parametric estimation of point spread function (PSF) called PSF Reconstruction and Identification for Multiple-source characterization Enhancement (PRIME). PRIME uses both focal and pupil-plane measurements to estimate jointly the model parameters related to the atmosphere [$C_n^2(h)$, seeing] and the AO system (e.g. optical gains and residual low-order errors). Photometry and astrometry are provided as by-products. The parametric model in use is flexible enough to be scaled with field location and wavelength, making it a proper choice for optimized on-axis and off-axis data-reduction across the spectrum. Here, we present the methodology and validate PRIME on engineering and binary Keck II telescope NIRC2 images. We also present applications of PSF model parameters retrieval using PRIME: (i) calibrate the PSF model for observations void of stars on the acquired images, i.e. optimize the PSF reconstruction process, (ii) update the AO error breakdown mutually constrained by the telemetry and the images in order to speculate on the origin of the missing error terms and evaluate their magnitude, and (iii) measure photometry and astrometry with an application to the triple system Gl569 images.

We present individual dynamical masses for the nearby M9.5+T5.5 binary WISE J072003.20$-$084651.2AB, a.k.a. Scholz's star. Combining high-precision CFHT/WIRCam photocenter astrometry and Keck adaptive optics resolved imaging, we measure the first high-quality parallactic distance ($6.80_{-0.06}^{+0.05}$ pc) and orbit ($8.06_{-0.25}^{+0.24}$ yr period) for this system composed of a low-mass star and brown dwarf. We find a moderately eccentric orbit ($e = 0.240_{-0.010}^{+0.009}$), incompatible with previous work based on less data, and dynamical masses of $99\pm6$ $M_{\rm Jup}$ and $66\pm4$ $M_{\rm Jup}$ for the two components. The primary mass is marginally inconsistent (2.1$\sigma$) with the empirical mass$-$magnitude$-$metallicity relation and models of main-sequence stars. The relatively high mass of the cold ($T_{\rm eff} = 1250\pm40$ K) brown dwarf companion indicates an age older than a few Gyr, in accord with age estimates for the primary star, and is consistent with our recent estimate of $\approx$70 $M_{\rm Jup}$ for the stellar/substellar boundary among the field population. Our improved parallax and proper motion, as well as an orbit-corrected system velocity, improve the accuracy of the system's close encounter with the solar system by an order of magnitude. WISE J0720$-$0846AB passed within $68.7\pm2.0$ kAU of the Sun $80.5\pm0.7$ kyr ago, passing through the outer Oort cloud where comets can have stable orbits., Comment: accepted to AJ

International audience; Gemini Observatory plans to revitalize its AO facility at Gemini North for the benefit of the US and international user community, including a funded MCAO system now in development. Our Strategic Plan calls for the development of a GLAO system enabled by an Adaptive Secondary Mirror. We discuss our plans, progress, and funding outlook.

High-contrast imaging of exoplanets and protoplanetary disks depends on wavefront sensing and correction made by adaptive optics instruments. Classically, wavefront sensing has been conducted at optical wavelengths, which made high-contrast imaging of red targets such as M-type stars or extincted T Tauri stars challenging. Keck/NIRC2 has combined near-infrared (NIR) detector technology with the pyramid wavefront sensor (PWFS). With this new module we observed SR~21, a young star that is brighter at NIR wavelengths than at optical wavelengths. Compared with the archival data of SR~21 taken with the optical wavefront sensing we achieved $\sim$20\% better Strehl ratio in similar natural seeing conditions. Further post-processing utilizing angular differential imaging and reference-star differential imaging confirmed the spiral feature reported by the VLT/SPHERE polarimetric observation, which is the first detection of the SR~21 spiral in total intensity at $L^\prime$ band. We also compared the contrast limit of our result ($10^{-4}$ at $0\farcs4$ and $2\times10^{-5}$ at $1\farcs0$) with the archival data that were taken with optical wavefront sensing and confirmed the improvement, particularly at $\leq0\farcs5$. Our observation demonstrates that the NIR PWFS improves AO performance and will provide more opportunities for red targets in the future., accepted for publication in AJ, 8 pages, 7 figures

It has been demonstrated by several authors that the optical turbulence parameters associated with a given adaptive optics (AO) run-the seeing angle and outer scale-can be determined from a statistical analysis of the commands of the system's deformable mirror (DM). The higher the accuracy on these parameters, the more we can make use of them, allowing for instance a better estimation of the seeing statistics at the telescope location or a more accurate assessment of the performance of the AO system. In the context of a point spread function reconstruction project (PSF-R) for the W. M. Keck observatory AO system, we decided to identify, in the most exhaustive way, all the sources of systematic and random errors affecting the determination of the seeing angle and outer scale from the DM telemetry, and find ways to compensate/mitigate these errors to keep them under 10%. The seeing estimated using our improved DM-seeing method was compared with more than 70 nearly simultaneous seeing measurements from open-loop PSFs on the same optical axis, and with independent seeing-monitor measurements acquired at the same time but far from the telescope (DIMM/MASS): the correlation with the open-loop PSF is very good (the error is about 10%), validating the DM-seeing method for accurate seeing determination, while it is weak and sometimes completely uncorrelated with the DIMM/MASS seeing monitor data. We concluded that DM-based seeing can be very accurate if all the error terms are considered in the DM data processing, but that seeing taken from non-collocated seeing monitors is of no use even when moderate accuracy is required.

A future upgrade of the Keck II telescope's adaptive optics system will include a near-infrared pyramid wavefront sensor. It will benefit from low-noise infrared detector technology, specifically the avalanche photodiode array SAPHIRA (Leonardo). The system will either operate with a natural guide star in a single conjugated adaptive optics system, or using a laser guide star (LGS), with the pyramid working as a low-order sensor. We present a study of the pyramid sensor's performance via end-to-end simulations, including an analysis of calibration strategies. For LGS operation, we compare the pyramid to LIFT, a focal-plane sensor dedicated to low-order sensing.

A near-infrared, high order pyramid wavefront sensor will be implemented on the Keck telescope, with the aim of providing high resolution adaptive optics correction for the study of exoplanets around M-type stars and planet formation in obscured star forming regions. The pyramid wavefront sensor is designed to support adaptive optics correction of the light to an imaging vortex coronagraph and to a fiber injection unit that will feed a spectrograph. We present the opto-mechanical design of the near-infrared pyramid wavefront sensor, the optical performance, and the alignment strategy. The challenges of designing the assembly, as well as a fiber injection unit, to fit into the limited available space on the Keck adaptive optics bench, will also be discussed., Adaptive Optics Systems VI, June 10-15, 2018, Austin, TX, USA, Series: Proceedings of SPIE; no. 10703

A new real-time control system will be implemented within the Keck II adaptive optics system to support the new near-infrared pyramid wavefront sensor. The new real-time computer has to interface with an existing, very productive adaptive optics system. We discuss our solution to install it in an operational environment without impacting science. This solution is based on an independent SCExAO-based pyramid wavefront sensor realtime processor solution using the hardware interfaces provided by the existing Keck II real-time controller. We introduce the new pyramid real-time controller system design, its expected performance, and the modification of the operational real-time controller to support the pyramid system including interfacing with the existing deformable and tip-tilt mirrors. We describe the integration of the Saphira detector-based camera and the Boston Micromachines kilo-DM in this new architecture. We explain the software architecture and philosophy, the shared memory concept and how the real-time computer uses the power of GPUs for adaptive optics control. We discuss the strengths and weaknesses of this architecture and how it can benefit other projects. The motion control of the devices deployed on the Keck II adaptive optics bench to support the alignment of the light on the sensors is also described. The interfaces, developed to deal with the rest of the Keck telescope systems in the observatory distributed system, are reviewed. Based on this experience, we present which design ideas could have helped us integrate the new system with the previous one and the resultant performance gains.

Here we report on the status of the The Keck Planet Imager and Characterizer (KPIC), which is an on-going series of upgrades to the W.M. Keck II adaptive optics system and instrument suite focused on exoplanet imaging and spectroscopic characterization. The KPIC infrared pyramid wavefront sensor and fiber injection unit to high-resolution infrared spectrograph NIRSPEC have been assembled, integrated and are under-going tests at the University of Hawaii before installation at the Summit in the Fall of 2018.