Search

"Pan-coronavirus" antivirals targeting conserved viral components can be designed. Here, we show that the rationally engineered H84T-banana lectin (H84T-BanLec), which specifically recognizes high mannose found on viral proteins but seldom on healthy human cells, potently inhibits Middle East respiratory syndrome coronavirus (MERS-CoV), severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) (including Omicron), and other human-pathogenic coronaviruses at nanomolar concentrations. H84T-BanLec protects against MERS-CoV and SARS-CoV-2 infection in vivo. Importantly, intranasally and intraperitoneally administered H84T-BanLec are comparably effective. Mechanistic assays show that H84T-BanLec targets virus entry. High-speed atomic force microscopy depicts real-time multimolecular associations of H84T-BanLec dimers with the SARS-CoV-2 spike trimer. Single-molecule force spectroscopy demonstrates binding of H84T-BanLec to multiple SARS-CoV-2 spike mannose sites with high affinity and that H84T-BanLec competes with SARS-CoV-2 spike for binding to cellular ACE2. Modeling experiments identify distinct high-mannose glycans in spike recognized by H84T-BanLec. The multiple H84T-BanLec binding sites on spike likely account for the drug compound's broad-spectrum antiviral activity and the lack of resistant mutants.

During the last three decades, a series of key technological improvements turned atomic force microscopy (AFM) into a nanoscopic laboratory to directly observe and chemically characterize molecular and cell biological systems under physiological conditions. Here, we review key technological improvements that have established AFM as an analytical tool to observe and quantify native biological systems from the micro- to the nanoscale. Native biological systems include living tissues, cells, and cellular components such as single or complexed proteins, nucleic acids, lipids, or sugars. We showcase the procedures to customize nanoscopic chemical laboratories by functionalizing AFM tips and outline the advantages and limitations in applying different AFM modes to chemically image, sense, and manipulate biosystems at (sub)nanometer spatial and millisecond temporal resolution. We further discuss theoretical approaches to extract the kinetic and thermodynamic parameters of specific biomolecular interactions detected by AFM for single bonds and extend the discussion to multiple bonds. Finally, we highlight the potential of combining AFM with optical microscopy and spectroscopy to address the full complexity of biological systems and to tackle fundamental challenges in life sciences.

Activation of membrane receptors through clustering is a common mechanism found in various biological systems. Spatial proximity of receptors may be transduced across the membrane to initiate signaling pathways or alternatively be recognized by peripheral proteins or immune cells to trigger external effector functions. Here we show how specific immunoglobulin G (IgG) binding induces clustering of monomeric target molecules in lipid membranes through Fc- Fc interactions. We visualize and characterize the dynamic IgG oligomerization process and the molecular interactions involved using high-speed atomic force microscopy, single-molecule force spectroscopy, and quartz crystal microbalance experiments. We found that the Fc-Fc interaction strength is precisely tuned to be weak enough to prevent IgG oligomerization in solution at physiological titers, but enabling IgG oligomerization when Fabs additionally bind to their cognate surface epitopes, a mechanism that ultimately targets IgG-mediated effector functions such as classical complement activation to antigenic membranes.

Physical forces and mechanical properties have critical roles in cellular function, physiology and disease. Over the past decade, atomic force microscopy (AFM) techniques have enabled substantial advances in our understanding of the tight relationship between force, mechanics and function in living cells and contributed to the growth of mechanobiology. In this Primer, we provide a comprehensive overview of the use of AFM-based force spectroscopy (AFM-FS) to study the strength and dynamics of cell adhesion from the cellular to the single-molecule level, spatially map cell surface receptors and quantify how cells dynamically regulate their mechanical and adhesive properties. We first introduce the importance of force and mechanics in cell biology and the general principles of AFM-FS methods. We describe procedures for sample and AFM probe preparations, the various AFM-FS modalities currently available and their respective advantages and limitations. We also provide details and recommendations for best usage practices, and discuss data analysis, statistics and reproducibility. We then exemplify the potential of AFM-FS in cellular and molecular biology with a series of recent successful applications focusing on viruses, bacteria, yeasts and mammalian cells. Finally, we speculate on the grand challenges in the area for the next decade. Atomic force microscopy-based force spectroscopy can probe the strength and dynamics of cell adhesion to understand how physical forces influence cellular function, physiology and disease. Here, Dufrene and colleagues discuss the ability of this technology to work as an ultra-sensitive force sensor to study the adhesion and elasticity of complex biological systems including viruses, bacteria, yeasts and mammalian cells.

The ~ 2.4 µm long rhinovirus ss(+)RNA genome consists of roughly 7,200 nucleotides. It is tightly folded to fit into the ~ 22 nm diameter void in the protein capsid. In addition to previously predicted secondary structural elements in the RNA, using the QGRS mapper, we revealed the presence of multiple quadruplex forming G-rich sequences (QGRS) in the RV-A, B, and C clades, with four of them being exquisitely conserved. The biophysical analyses of ribooligonucleotides corresponding to selected QGRS demonstrate G-quadruplex (GQ) formation in each instance and resulted in discovering another example of an unconventional, two-layer zero-nucleotide loop RNA GQ stable at physiological conditions. By exploiting the temperature-dependent viral breathing to allow diffusion of small compounds into the virion, we demonstrate that the GQ-binding compounds PhenDC3 and pyridostatin (PDS) uniquely interfere with viral uncoating. Remarkably, this inhibition was entirely prevented in the presence of K+ but not Na+, despite the higher GQ stabilising effect of K+. Based on virus thermostability studies combined with ultrastructural imaging of isolated viral RNA, we propose a mechanism where Na+ keeps the encapsidated genome loose, allowing its penetration by PDS to promote the transition of QGRS sequestered in alternative metastable structures into GQs. The resulting conformational change then materialises in a severely compromised RNA release from the proteinaceous shell. Targeting extracellularly circulating RVs with GQ-stabilisers might thus become a novel way of combating the common cold.

Microbial resistant coatings have raised considerable interest in the biotechnological industry and clinical scenarios to combat the spreading of infections, in particular in implanted medical devices. Polymer brushes covalently attached to surfaces represent a useful platform to identify ideal compositions for preventing bacterial settlement by quantifying bacteria-surface interactions. In this work, a series of polymer brushes with different charges, positively charged poly[2-(methacryloyloxy)ethyl trimethylammonium chloride] (PMETAC), negatively charged poly(3-sulfopropyl methacrylate potassium salt) (PSPMA), and neutral poly(2-hydroxyethyl methacrylate) (PHEMA) were grafted onto glass surfaces by surface-initiated atom transfer radical polymerization in aqueous conditions. The antimicrobial activity of the polymer brushes against Gram-negative

Reliable quantification of binding affinity is important in biotechnology and pharmacology and increasingly coupled with a demand for ultrasensitivity, nanoscale resolution, and minute sample amounts. Standard techniques are not able to meet these criteria. This study provides a new platform based on atomic force microscopy (AFM)-derived recognition imaging to determine affinity by visualizing single molecular bindings on nanosize dendrons. Using DNA hybridization as a demonstrator, an AFM sensor adorned with a cognate binding strand senses and localizes target DNAs at nanometer resolution. To overcome the limitations of speed and resolution, the AFM cantilever is sinusoidally oscillated close to resonance conditions at small amplitudes. The equilibrium dissociation constant of capturing DNA duplexes was obtained, yielding 2.4 × 10–10 M. Our label-free single-molecular biochemical analysis approach evidences the utility of recognition imaging and analysis in quantifying biomolecular interactions of just a...

Coronaviruses have repeatedly crossed species barriers to cause epidemics1. “Pan-coronavirus” antivirals targeting conserved viral components involved in coronavirus replication, such as the extensively glycosylated spike protein, can be designed. Here we show that the rationally engineered H84T-banana lectin (H84T-BanLec), which specifically recognizes high-mannose found on viral proteins but seldom on healthy human cells2, potently inhibits the highly virulent MERS-CoV, pandemic SARS-CoV-2 and its variants, and other human-pathogenic coronaviruses at nanomolar concentrations. MERS-CoV-infected human DPP4-transgenic mice treated by H84T-BanLec have significantly higher survival, lower viral burden, and reduced pulmonary damage. Similarly, prophylactic or therapeutic H84T-BanLec is effective against SARS-CoV-2 in hamsters. Importantly, intranasally and intraperitoneally administered H84T-BanLec are comparably effective. Time-of-drug-addition assay shows that H84T-BanLec targets virus entry. Real-time structural analysis with high-speed atomic force microscopy depicts multi-molecular associations of H84T-BanLec dimers with the SARS-CoV-2 spike trimer. Single-molecule force spectroscopy demonstrates binding of H84T-BanLec to multiple SARS-CoV-2 spike mannose sites with high affinity, and that H84T-BanLec competes with SARS-CoV-2 spike for binding to cellular ACE2. Modelling experiments identify distinct high-mannose glycans in spike recognized by H84T-BanLec. The multiple H84T-BanLec binding sites on spike likely account for the activity against SARS-CoV-2 variants and the lack of resistant mutants. The broad-spectrum H84T-BanLec should be clinically evaluated in respiratory viral infections including COVID-19.

New SARS-CoV-2 variants are continuously emerging with critical implications for therapies or vaccinations. All 22 N-glycan sites of SARS-CoV-2 Spike remain highly conserved among the variants B.1.1.7, 501Y.V2 and P.1, opening an avenue for robust therapeutic intervention. Here we used a comprehensive library of mammalian carbohydrate-binding proteins (lectins) to probe critical sugar residues on the full-length trimeric Spike and the receptor binding domain (RBD) of SARS-CoV-2. Two lectins, Clec4g and CD209c, were identified to strongly bind to Spike. Clec4g and CD209c binding to Spike was dissected and visualized in real time and at single molecule resolution using atomic force microscopy. 3D modelling showed that both lectins can bind to a glycan within the RBD-ACE2 interface and thus interferes with Spike binding to cell surfaces. Importantly, Clec4g and CD209c significantly reduced SARS-CoV-2 infections. These data report the first extensive map and 3D structural modelling of lectin-Spike interactions and uncovers candidate receptors involved in Spike binding and SARS-CoV-2 infections. The capacity of CLEC4G and mCD209c lectins to block SARS-CoV-2 viral entry holds promise for pan-variant therapeutic interventions.

The maintenance of visual function is supported by the proper functioning of the retinal pigment epithelium (RPE), representing a mosaic of polarized cuboidal postmitotic cells. Damage factors such as inflammation, aging, or injury can initiate the migration and proliferation of RPE cells, whereas they undergo a pseudo-metastatic transformation or an epithelial to mesenchymal transition (EMT) from cuboidal epithelioid into fibroblast-like or macrophage-like cells. This process is recognized as a key feature in several severe ocular pathologies, and is mimicked by placing RPE cells in culture, which provides a reasonable and well-characterized in vitro model for a type 2 EMT. The most obvious characteristic of EMT is the cell phenotype switching, accompanied by the cytoskeletal reorganization with changes in size, shape, and geometry. Atomic force microscopy (AFM) has the salient ability to label-free explore these characteristics. Based on our AFM results supported by the genetic analysis of specific RPE differentiation markers, we elucidate a scheme for gradual transformation from the cobblestone to fibroblast-like phenotype. Structural changes in the actin cytoskeletal reorganization at the early stages of EMT lead to the development of characteristic geodomes, a finding that may reflect an increased propensity of RPE cells to undergo further EMT and thus become of diagnostic significance. (VLID)5688926 Version of record

The fabrication of two- and three-dimensional scaffolds mimicking the extracellular matrix and providing cell stimulation is of high importance in biology and material science. We show two new, biocompatible polymers, which can be 3D structured via multiphoton lithography, and determine their mechanical properties. Atomic force microscopy analysis of structures with sub-micron feature sizes reveals Young's modulus values in the 100 MPa range. Assessment of biocompatibility of the new resins was done by cultivating human umbilical vein endothelial cells on two-dimensionally structured substrates for four days. The cell density and presence of apoptotic cells has been quantified.

BACKGROUND Adenylate cyclase (CyaA) is one of the major virulence factors of Bordetella pertussis that plays a key role in whooping cough pathogenesis. A putative transmembrane helical hairpin (α2-loop-α3), encompassing residues 529-594 of CyaA hemolysin (CyaA-Hly) domain, was previously proposed to be crucially involved in hemolytic activity against target erythrocytes. OBJECTIVE The main objective of this study was to gain more insight into membrane permeabilization of this toxin. Membrane-permeabilizing abilities of the purified 130-kDa CyaA-Hly and synthetic peptides corresponding to the helical component of interest, were evaluated. METHODS Synthetic peptides corresponding to the critical helical component, i.e. α2 (W528-G550), α3 (G568-R594) and α2-loop-α3 (W528-R594), were examined on various membrane models in comparison with the purified 130-kDa CyaA-Hly. The peptides were commercially synthesized and the purified toxin was obtained from recombinant plasmid construction and expression in Escherichia coli, followed by purification via immobilized-metal affinity chromatography. Membrane permeabilization or hemolysis of the peptides or the purified toxin were determined by liposomal leakage, hemolysis assays and atomic force microscopy (AFM) imaging. RESULTS Our results showed that the truncated 130-kDa CyaA-Hly, the synthetic peptides α2, α3 and the α2-loop-α3 hairpin exhibited distinct membrane-permeabilizing capacities in different membrane models. We demonstrated that the CyaA-Hly toxin and the peptides, especially the α2 peptide, caused nonspecific liposomal leakage as monitored by fluorescence dequenching of sulforhodamine B-loaded lipid vesicles. Notably, α2 peptide showed a predominant effect of membrane permeabilization when compared to α2-loop-α3 hairpin and α3 peptides. In addition, AFM imaging demonstrates lipid membrane disruption induced by the CyaA-Hly toxin or the peptidic α2-loop-α3 hairpin. CONCLUSION Overall, the study provides the supporting evidence that the putative helical α2-loop-α3 hairpin could interact with the lipid membranes while the helical α2 peptide strongly induced liposomal leakage and hemolysis, as compared with the helical α3 or the α2-loop-α3 peptides, suggesting that the helix 2 from the hydrophobic region of CyaA-Hly is a crucial component that contributes to membrane permeabilization.

Mitochondrial membrane uncoupling protein 3 (UCP3) is not only expressed in skeletal muscle and heart, but also in brown adipose tissue (BAT) alongside UCP1, which facilitates a proton leak to support non-shivering thermogenesis. In contrast to UCP1, the transport function and molecular mechanism of UCP3 regulation are poorly investigated, although it is generally agreed upon that UCP3, analogous to UCP1, transports protons, is activated by free fatty acids (FFAs) and is inhibited by purine nucleotides (PNs). Because the presence of two similar uncoupling proteins in BAT is surprising, we hypothesized that UCP1 and UCP3 are differently regulated, which may lead to differences in their functions. By combining atomic force microscopy and electrophysiological measurements of recombinant proteins reconstituted in planar bilayer membranes, we compared the level of protein activity with the bond lifetimes between UCPs and PNs. Our data revealed that, in contrast to UCP1, UCP3 can be fully inhibited by all PNs and IC50 increases with a decrease in PN-phosphorylation. Experiments with mutant proteins demonstrated that the conserved arginines in the PN-binding pocket are involved in the inhibition of UCP1 and UCP3 to different extents. Fatty acids compete with all PNs bound to UCP1, but only with ATP bound to UCP3. We identified phosphate as a novel inhibitor of UCP3 and UCP1, which acts independently of PNs. The differences in molecular mechanisms of the inhibition between the highly homologous transporters UCP1 and UCP3 indicate that UCP3 has adapted to fulfill a different role and possibly another transport function in BAT.

Background The glycosylation of proteins on the surface of corneocytes is believed to play an important role in cellular adhesion in the stratum corneum (SC) of human skin. Mapping with accuracy the localization of glycans on the surface of corneocytes through traditional methods of immunohistochemistry and electron microscopy remains a challenging task as both approaches lack enough resolution or need to be performed in high vacuum conditions. Materials and methods We used an advanced mode of atomic force microscope (AFM), with simultaneous topography and recognition imaging to investigate the distribution of glycans on native (no chemical preparation) stripped samples of human SC. The AFM cantilever tips were functionalized with anti‐heparan sulfate antibody and the lectin wheat germ agglutinin (WGA) which binds specifically to N‐acetyl glucosamine and sialic acid. Results From the recognition imaging, we observed the presence of the sulfated glycosaminoglycan, heparan sulfate, and the glycans recognized by WGA on the surface of SC corneocytes in their native state. These glycans were found associated with bead‐like domains which represent corneodesmosomes in the SC layers. Glycan density was calculated to be ~1200 molecules/μm2 in lower layers of SC compared to an important decrease, (~106 molecules/μm2) closer to the surface due probably to corneodesmosome degradation. Conclusion Glycan spatial distribution and degradation is first observed on the surface of SC in native conditions and at high resolution. The method used can be extended to precisely localize the presence of other macromolecules on the surface of skin or other tissues where the maintenance of its native state is required.

Summary Structural maintenance of chromosomes (SMC) complexes organize genome topology in all kingdoms of life and have been proposed to perform this function by DNA loop extrusion. How this process works is unknown. Here, we have analyzed how loop extrusion is mediated by human cohesin-NIPBL complexes, which enable chromatin folding in interphase cells. We have identified DNA binding sites and large-scale conformational changes that are required for loop extrusion and have determined how these are coordinated. Our results suggest that DNA is translocated by a spontaneous 50 nm-swing of cohesin’s hinge, which hands DNA over to the ATPase head of SMC3, where upon binding of ATP, DNA is clamped by NIPBL. During this process, NIPBL “jumps ship” from the hinge toward the SMC3 head and might thereby couple the spontaneous hinge swing to ATP-dependent DNA clamping. These results reveal mechanistic principles of how cohesin-NIPBL and possibly other SMC complexes mediate loop extrusion., Graphical abstract, Highlights • Identification of cohesin’s DNA binding sites and movements needed for loop extrusion • A DNA binding site on the hinge might translocate DNA by ATP-independent swinging • DNA clamping on the ATPase heads is regulated by ATP-dependent engagement cycles • NIPBL couples ATP-independent and -dependent DNA translocation events, Cohesin hands DNA over long distances from one binding site to another, explaining how SMC complexes might fold genomes in all kingdoms of life.

Controversy regarding the number and function of ligand binding sites in neurotransmitter/sodium symporters arose from conflicting data in crystal structures and molecular pharmacology. Here, we have designed novel tools for atomic force microscopy that directly measure the interaction forces between the serotonin transporter (SERT) and the S- and R-enantiomers of citalopram on the single molecule level. This approach is based on force spectroscopy, which allows for the extraction of dynamic information under physiological conditions thus inaccessible via X-ray crystallography. Two distinct populations of characteristic binding strengths of citalopram to SERT were revealed in Na(+)-containing buffer. In contrast, in Li(+) -containing buffer, SERT showed only low force interactions. Conversely, the vestibular mutant SERT-G402H merely displayed the high force population. These observations provide physical evidence for the existence of two binding sites in SERT when accessed in a physiological context. Competition experiments revealed that these two sites are allosterically coupled and exert reciprocal modulation.

In the development and design of cell targeted nanoparticle-based systems the density of targeting moieties plays a fundamental role in allowing maximal cell-specific interaction. Here, we describe the use of molecular recognition force spectroscopy as a valuable tool for the characterization and optimization of targeted nanoparticles toward attaining cell-specific interaction. By tailoring the density of targeting moieties at the nanoparticle surface, one can correlate the unbinding event probability between nanoparticles tethered to an atomic force microscopy tip and cells to the nanoparticle vectoring capacity. This novel approach allows for a rapid and cost-effective design of targeted nanomedicines reducing the need for long and tedious in vitro tests.

Escherichia coli cells containing the amyloid curli protein CsgA bind to abiotic surfaces and the extracellular matrix protein fibronectin. Here we describe procedures for following bacterial attachment to glass surfaces and provide protocols for coupling bacterial cells to AFM tips. Using single microbial cell force spectroscopy in physiological environment, we show methods to probe mechanical parameters and the dissociation of curliated E. coli cells from fibronectin surfaces by quantifying Young's modulus, unbinding forces, and de-adhesion works.

Escherichia coli cells containing the amyloid curli protein CsgA bind to abiotic surfaces and the extracellular matrix protein fibronectin. Here we describe procedures for following bacterial attachment to glass surfaces and provide protocols for coupling bacterial cells to AFM tips. Using single microbial cell force spectroscopy in physiological environment, we show methods to probe mechanical parameters and the dissociation of curliated E. coli cells from fibronectin surfaces by quantifying Young's modulus, unbinding forces, and de-adhesion works.

In the development and design of cell targeted nanoparticle-based systems the density of targeting moieties plays a fundamental role in allowing maximal cell-specific interaction. Here, we describe the use of molecular recognition force spectroscopy as a valuable tool for the characterization and optimization of targeted nanoparticles toward attaining cell-specific interaction. By tailoring the density of targeting moieties at the nanoparticle surface, one can correlate the unbinding event probability between nanoparticles tethered to an atomic force microscopy tip and cells to the nanoparticle vectoring capacity. This novel approach allows for a rapid and cost-effective design of targeted nanomedicines reducing the need for long and tedious in vitro tests.

In this protocol, we provide a detailed step-by-step bacterial surface imaging and molecular analysis procedure. With SPM (scanning probe microscopy)-based dynamic force microscopy (DFM) imaging, we achieved a so far unprecedented resolution of ~1 nm on the outer surface layer of Tannerella forsythia and monitored the production of curli fibers on Escherichia coli in physiological conditions. Moreover, using these immobilization methods, single-molecule force spectroscopy experiments were conducted on living bacterial cells.

The number of ligand binding sites in neurotransmitter-sodium symporters has been determined by crystal structure analysis and molecular pharmacology with controversial results. Here, we designed molecular tools to measure the interaction forces between the serotonin transporter (SERT) and S-citalopram on the single-molecule level by means of atomic force microscopy. Force spectroscopy allows for the extraction of dynamic information under physiological conditions which is inaccessible via X-ray crystallography. Two populations of distinctly different binding strength between S-citalopram and SERT were demonstrated in Na

In this protocol, we provide a detailed step-by-step bacterial surface imaging and molecular analysis procedure. With SPM (scanning probe microscopy)-based dynamic force microscopy (DFM) imaging, we achieved a so far unprecedented resolution of ~1 nm on the outer surface layer of Tannerella forsythia and monitored the production of curli fibers on Escherichia coli in physiological conditions. Moreover, using these immobilization methods, single-molecule force spectroscopy experiments were conducted on living bacterial cells.

Permanent antibacterial coatings have been developed by brush-like polyethyleneimine (PEI) on polyurethane (PU) ureteral stents since bacterial adhesion and biofilm formation with the following encrustation on stent surface limit their long term usage. In order to control or prevent bacterial infections; PEI chains with two different molecular weights (Mn: 1800 or 60,000 Da) were covalently attached on the polyurethane (PU) surface by "grafting to" approach to obtain a brush-like structure. Then, PEI brushes were alkylated with bromohexane to enhance the disruption of bacterial membranes with increasing polycationic character. X-ray Photoelectron and Infrared Spectroscopy investigations confirmed that PEI grafting and alkylation steps were performed successfully. Surface roughness in dry state increased dramatically from 65.8 nm to 277.7 nm and 145.2 nm for short chain PEI and long chain PEI grafted samples, respectively. Both low and high molecular weight PEI grafts exhibited a brush-like structure and potent antibacterial activity by lowering the adherence of Klebsiella pneumonia, Escherichia coil and Proteus mirabilis species up to two orders of magnitude without any cytotoxic effect on L929 and G/G cells. Thus, permanent bactericidal activity was achieved by the contact-active strategy of dynamic PEI brush-like structures on polyurethane ureteral stent. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Cutaneous malignant melanoma is one of the most lethal types of skin cancer. Its progression passes through several steps, leading to the appearance of a new population of cells with aggressive biological potential. Here, we focused on the nano-characterization of two different melanoma cell lines with similar morphological appearance but different metastatic potential, namely, WM115 from vertical growth phase (VGP) and WM266-4 derived from metastasis to skin. The first cell line represents cells that progressed to the VGP, while the WM266-4 cell line denotes cells from the metastasis to skin. Exploring with a combination of atomic force and fluorescence microscopes, our goal was to identify cell surface characteristics in both cell lines that may determine differences in the cellular nano-mechanical properties. Cell elasticity was found to be affected by the presence of F-actin-based flexible ridges, rich in F-actin co-localized with β1 integrins in the studied cell lines. These results point out how progressive changes in the surface structure of melanoma cells can affect their bionanomechanical properties.

Influenza A viruses (IAV) initiate infection via binding of the viral hemagglutinin (HA) to sialylated glycan receptors on host cells. HAs receptor specificity towards sialic acid (SA) is well studied and clearly critical for virus infection, but the contribution of the highly complex cellular plasma membrane to the cellular specificity remains elusive. In addition, some studies indicated that other host cell factors such as the epidermal growth factor receptor might contribute to the initial virus-cell contact and further downstream signaling1.Here we use two complementary methods, glycan arrays and single-virus force spectroscopy (SVFS) to compare influenza virus receptor specificity with actual host cell binding. Unexpectedly, our study reveals that HAs receptor binding preference does not necessarily reflect virus-cell specificity. We propose SVFS as a tool to elucidate the cell binding preference of IAV thereby including the complex environment of sialylated receptors within the plasma membrane of living cells.

Calmodulin (CaM) binds most of its targets by wrapping around an amphipathic α-helix. The N-terminus of Orai proteins contains a conserved CaM-binding segment but the binding mechanism has been only partially characterized. Here, microscale thermophoresis (MST), surface plasmon resonance (SPR), and atomic force microscopy (AFM) were employed to study the binding equilibria, the kinetics, and the single-molecule interaction forces involved in the binding of CaM to the conserved helical segments of Orai1 and Orai3. The results consistently indicated stepwise binding of two separate target peptides to the two lobes of CaM. An unparalleled high affinity was found when two Orai peptides were dimerized or immobilized at high lateral density, thereby mimicking the close proximity of the N-termini in native Orai oligomers. The analogous experiments with smooth muscle myosin light chain kinase (smMLCK) showed only the expected 1:1 binding, confirming the validity of our methods.

Ca2+ release-activated Ca2+ (CRAC) channels constitute the major Ca2+ entry pathway into the cell. They are fully reconstituted via intermembrane coupling of the Ca2+-selective Orai channel and the Ca2+-sensing protein STIM1. In addition to the Orai C terminus, the main coupling site for STIM1, the Orai N terminus is indispensable for Orai channel gating. Although the extended transmembrane Orai N-terminal region (Orai1 amino acids 73–91; Orai3 amino acids 48–65) is fully conserved in the Orai1 and Orai3 isoforms, Orai3 tolerates larger N-terminal truncations than Orai1 in retaining store-operated activation. In an attempt to uncover the reason for these isoform-specific structural requirements, we analyzed a series of Orai mutants and chimeras. We discovered that it was not the N termini, but the loop2 regions connecting TM2 and TM3 of Orai1 and Orai3 that featured distinct properties, which explained the different, isoform-specific behavior of Orai N-truncation mutants. Atomic force microscopy studies and MD simulations suggested that the remaining N-terminal portion in the non-functional Orai1 N-truncation mutants formed new, inhibitory interactions with the Orai1-loop2 regions, but not with Orai3-loop2. Such a loop2 swap restored activation of the N-truncation Orai1 mutants. To mimic interactions between the N terminus and loop2 in full-length Orai1 channels, we induced close proximity of the N terminus and loop2 via cysteine cross-linking, which actually caused significant inhibition of STIM1-mediated Orai currents. In aggregate, maintenance of Orai activation required not only the conserved N-terminal region but also permissive communication of the Orai N terminus and loop2 in an isoform-specific manner.

Elucidation the nano-organization of membrane proteins at/within the plasma membrane is probably the most demanding and still challenging task in cell biology since requires experimental approaches with nanoscale resolution. During last decade, atomic force microscopy (AFM)-based simultaneous topography and recognition imaging (TREC) has become a powerful tool to quickly obtain local receptor nano-maps on complex heterogeneous biosurfaces such as cells and membranes. Here we emphasize the TREC technique and explain how to unravel the nano-landscape of mammalian cells. We describe the procedures for all steps of the experiment including tip functionalization with ligand molecules, sample preparation, and localization of key molecules on the cell surface. We also discuss the current limitations and future perspectives of this technique.

We combined recognition imaging and force spectroscopy to study the interactions between receptors and ligands on the single molecule level. This method allowed the selection of a single receptor molecule reconstituted in a supported lipid membrane at low density, with the subsequent quantification of the receptor-ligand unbinding force. Based on atomic force microscopy (AFM) tapping mode, a cantilever tip carrying a ligand molecule was oscillated across a membrane. Topography and recognition images of reconstituted receptors were recorded simultaneously by analyzing the downward and upward parts of the oscillation, respectively. Functional receptor molecules were selected from the recognition image with nanometer resolution before the AFM was switched to the force spectroscopy mode, using positional feedback control. The combined mode allowed for dynamic force probing on different pre-selected molecules, resulting in higher throughput when compared with force mapping. We applied this method for a quantitative characterization of the binding mechanism between mitochondrial uncoupling protein 1 (UCP1) and its inhibitor adenosine triphosphate (ATP). Moreover the dynamics of force loading was varied to elucidate the binding dynamics and map the interaction energy landscape.