Search

Low wind and petaling effects, caused by the discontinuous apertures of telescopes, are poorly corrected -- if at all -- by commonly used workhorse wavefront sensors (WFSs). Wavefront petaling breaks the coherence of the point spread function core, splitting it into several side lobes, dramatically shutting off scientific throughput. We demonstrate the re-purposing of non-redundant sparse aperture masking (SAM) interferometers into low-order WFSs complementing the high-order pyramid WFS, on the SCExAO experimental platform at Subaru Telescope. The SAM far-field interferograms formed from a 7-hole mask are used for direct retrieval of petaling aberrations, which are almost invisible to the main AO loop. We implement a visible light dual-band SAM mode, using two disjoint 25 nm wide channels, that we recombine to overcome the one-lambda ambiguity of fringe-tracking techniques. This enables a control over petaling with sufficient capture range yet without conflicting with coronagraphic modes in the near-infrared. We present on-sky engineering results demonstrating that the design is able to measure petaling well beyond the range of a single-wavelength equivalent design., Proc. SPIE 12185 (Adaptive Optics Systems VIII), 285-297

The recently discovered colliding-wind binary (CWB) Apep has been shown to emit luminously from radio to X-rays, with the emission driven by a binary composed of two Wolf-Rayet (WR) stars of one carbon-sequence (WC8) and one nitrogen-sequence (WN4-6b). Mid-infrared imaging revealed a giant spiral dust plume that is reminiscent of a pinwheel nebula but with additional features that suggest Apep is a unique system. We have conducted observations with the Australian Long Baseline Array to resolve Apep's radio emission on milliarcsecond scales, allowing us to relate the geometry of the wind-collision region to that of the spiral plume. The observed radio emission shows a bow-shaped structure, confirming its origin as a wind-collision region. The shape and orientation of this region is consistent with being originated by the two stars and with being likely dominated by the stronger wind of the WN4-6b star. This shape allowed us to provide a rough estimation of the opening angle of $\sim 150^\circ$ assuming ideal conditions. The orientation and opening angle of the emission also confirms it as the basis for the spiral dust plume. We also provide estimations for the two stars in the system to milliarcsecond precision. The observed radio emission, one order of magnitude brighter and more luminous than any other known non-thermal radio-emitting CWB, confirms it is produced by an extremely powerful wind collision. Such a powerful wind-collision region is consistent with Apep being a binary composed of two WR stars, so far the first unambiguously confirmed system of its kind., Comment: 9 pages, 3 figures, accepted for publication in MNRAS

In less than a year, the James Webb Space Telescope (JWST) will inherit the mantle of being the world's pre-eminent infrared observatory. JWST will carry with it an Aperture Masking Interferometer (AMI) as one of the supported operational modes of the Near-InfraRed Imager and Slitless Spectrograph (NIRISS) instrument. Aboard such a powerful platform, the AMI mode will deliver the most advanced and scientifically capable interferometer ever launched into space, exceeding anything that has gone before it by orders of magnitude in sensitivity. Here we present key aspects of the design and commissioning of this facility: data simulations ($\texttt{ami_sim}$), the extraction of interferometeric observables using two different approaches ($\texttt{IMPLANEIA}$ and $\texttt{AMICAL}$), an updated view of AMI's expected performance, and our reference star vetting programs., Comment: 18 pages, 10 figures, invited paper conference

Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sensitivity, their design focus was not the sensitivity but relative astrometric accuracy, imaging capability, or spectral resolution. Our goal is to build an instrument specifically designed to optimize for sensitivity. This meant focusing our design efforts on different parts of the instrument and investigating new technologies and techniques. First, we make use of the low-noise C-RED One camera using e-APD technology and provided by First Light Imaging, already used in the improvement of sensitivity in recent new instruments. We forego the use of single-mode fibers but still favor an image plane design that offers more sensitivity than a pupil plane layout. We also use a minimum number of optical elements to maximize the throughput of the design, using a long focal length cylindrical mirror. We chose to limit our design to 3 beams, to have the capability to obtain closure phases, but not dilute the incoming flux in more beam combinations. We also use in our design an edge filter to have the capability to observe H- and K-band at the same time. We use a low spectral resolution, allowing for group delay fringe tracking but maximizing the SNR of the fringes for each spectral channel. All these elements will lead to a typical limiting magnitude between 10 and 11 in both H- and K-bands., Comment: 23 pages, 14 figures, proceeding for SPIE Astronomical Telescopes and Instrumentation 2022

The Wolf-Rayet (WR) binary system WR140 is a close (0.9-16.7 mas; ref.

Post Extreme Adaptive-Optics (ExAO) spectro-interferometers design allows high contrast imaging with an inner working angle down to half the theoretical angular resolution of the telescope. This regime, out of reach for conventional ExAO imaging systems, is obtained thanks to the interferometric recombination of multiple sub-apertures of a single telescope, using single mode waveguides to remove speckle noise. The SCExAO platform at the Subaru telescope hosts two instruments with such design, coupled with a spectrograph. The FIRST instrument operates in the Visible (600-800nm, R~400) and is based on pupil remapping using single-mode fibers. The GLINT instrument works in the NIR (1450-1650nm, R~160) and is based on nulling interferometry. We present here how these photonic instruments have the unique capability to simultaneously do high contrast imaging and be included in the wavefront sensing architecture of SCExAO.

High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamental contrast limit imposed by photon noise. We highlight the value of deploying multiple high-efficiency wavefront sensors (WFSs) covering a wide spectral range and spanning multiple optical locations. We show how their combined information can be leveraged to simultaneously improve WFS sensitivity and residual starlight calibration, ideally making it impossible for an image plane speckle to hide from WFS telemetry. We demonstrate residual starlight calibration in the laboratory and on-sky, using both a coronagraphic setup, and a nulling spectro-interferometer. In both case, we show that bright starlight can calibrate residual starlight.

Accurate measurement of exoplanetary masses is a critical step in addressing key aspects of NASA's science vision. Measuring masses of Earth-analogs around FGK stars out to 10 pc requires sub-microarcsecond astrometric accuracy, which is not within the capabilities of current instrumentation. Thus, new technology will be required to build an astrometric instrument capable of achieving such performance. This will immediately empower the possibility for dedicated astrometric missions, and perhaps most enticing, it will enable astrometric observing modes to be added (with relatively low cost and impact) to any mission boasting a sufficiently stable direct imaging platform. In this paper, we provide an overview of the scientific goals and technology utilized on two of NASA's astrometry testbeds dedicated to advancing stellar astrometry for exoplanet detection. The first one, located at the Jet Propulsion Laboratory (JPL), is dedicated to imaging stellar astrometry on sparse fields. The goal of this testbed is to mature the Diffractive Pupil (DP) technology to TRL-5, demonstrating high-fidelity performance in a relevant environment. This testbed operates in a vacuum tank at the High Contrast Imaging Testbed (HCIT) at JPL. The second testbed, located at NASA Ames Research Center, is dedicated to advancing narrow angle relative astrometry to detect exoplanets around nearby binary stars. The key technology in this testbed is a DP specially designed to measure the angle between two sources on the sky. This testbed operates in air and aims to bring this technology to TRL-4.

Astrometric detection involves precise measurements of stellar positions, and it is widely regarded as the leading concept presently ready to find Earth-mass planets in temperate orbits around nearby sun-like stars. The TOLIMAN space telescope [39] is a low-cost, agile mission concept dedicated to narrow-angle astrometric monitoring of bright binary stars. In particular the mission will be optimised to search for habitable-zone planets around {\$}{\$}{\backslash}alpha {\$}{\$}$\alpha$ Centauri AB. If the separation between these two stars can be monitored with sufficient precision, tiny perturbations due to the gravitational tug from an unseen planet can be witnessed and, given the configuration of the optical system, the scale of the shifts in the image plane are about one-millionth of a pixel. Image registration at this level of precision has never been demonstrated (to our knowledge) in any setting within science. In this paper, we demonstrate that a Deep Convolutional Auto-Encoder is able to retrieve such a signal from simplified simulations of the TOLIMAN data and we present the full experimental pipeline to recreate out experiments from the simulations to the signal analysis. In future works, all the more realistic sources of noise and systematic effects present in the real-world system will be injected into the simulations.

Integrated-optic components are being increasingly used in astrophysics, mainly where accuracy and precision are paramount. One such emerging technology is nulling interferometry that targets high contrast and high angular resolution. Two of the most critical limitations encountered by nullers are rapid phase fluctuations in the incoming light causing instability in the interference and chromaticity of the directional couplers that prevent a deep broadband interferometric null. We explore the use of a tricoupler designed by ultrafast laser inscription that solves both issues. Simulations of a tricoupler, incorporated into a nuller, result in order of a magnitude improvement in null depth., Comment: 12 pages, 6 figures, 1 table, Accepted in Applied Optics

In 1978, Bracewell suggested the technique of nulling interferometry to directly image exoplanets which would enable characterisation of their surfaces, atmospheres, weather, and possibly determine their capacity to host life. The contrast needed to discriminate starlight reflected by a terrestrial-type planet from the glare of its host star lies at or beyond a forbidding$10^{-10}$for an exo-Earth in the habitable zone around a Sun-like star at near-infrared wavelengths, necessitating instrumentation with extremely precise control of the light. Guided Light Interferometric Nulling Technology (GLINT) is a testbed for new photonic devices conceived to overcome the challenges posed by nulling interferometry. At its heart, GLINT employs a single-mode nulling photonic chip fabricated by direct-write technology to coherently combine starlight from an arbitrarily large telescope at 1 550 nm. It operates in combination with an actuated segmented mirror in a closed-loop control system, to produce and sustain a deep null throughout observations. The GLINT South prototype interfacesthe 3.9-m Anglo-Australian Telescope and was tested on a sample of bright Mira variable stars. Successful and continuous starlight injection into the photonic chip was achieved. A statistical model of the data was constructed, enabling a data reduction algorithm to retrieve contrast ratios of about$10^{-3}$. As a byproduct of this analysis, stellar angular diameters that were below the telescope diffraction limit($\sim$100 mas) were recovered with1$\sigma$accuracy and shown to be in agreement with literature values despite working in the seeing-limited regime. GLINT South serves as a demonstration of the capability of direct-write photonic technology for achieving coherent, stable nulling of starlight, which will encourage further technological developments towards the goal of directly imaging exoplanets with future large ground based and space telescopes.

We report on the design, construction, and commissioning of a prototype aperture masking technology implemented at the Keck OSIRIS Imager: the holographic aperture mask. Holographic aperture masking (HAM) aims at (i) increasing the throughput of sparse aperture masking (SAM) by selectively combining all subapertures across a telescope pupil in multiple interferograms using a phase mask, and (ii) adding low-resolution spectroscopic capabilities. Using liquid-crystal geometric phase patterns, we manufacture a HAM mask that uses an 11-hole SAM design as the central component and a holographic component comprising 19 different subapertures. Thanks to a multilayer liquid-crystal implementation, the mask has a diffraction efficiency higher than 96% from 1.1 to 2.5 micron. We create a pipeline that extracts monochromatic closure phases from the central component as well as multiwavelength closure phases from the holographic component. We test the performance of the HAM mask in the laboratory and on-sky. The holographic component yields 26 closure phases with spectral resolutions between R$\sim$6.5 and R$\sim$15. On April 19, 2019, we observed the binary star HDS 1507 in the Hbb filter ($\lambda_0 = 1638$ nm and $\Delta \lambda = 330$ nm) and retrieved a constant separation of 120.9 $\pm 0.5$ mas for the independent wavelength bins, which is in excellent agreement with literature values. For both the laboratory measurements and the observations of unresolved reference stars, we recorded nonzero closure phases -- a potential source of systematic error that we traced to polarization leakage of the HAM optic. We propose a future upgrade that improves the performance, reducing this effect to an acceptable level. Holographic aperture masking is a simple upgrade of SAM with increased throughput and a new capability of simultaneous low-resolution spectroscopy that provides new differential observables., Comment: 17 pages, 21 figures, 7 tables, accepted for publication in A&A

With thousands of confirmed exoplanets, the era of discovery is giving way to that of characterization. Direct imaging is crucial, but extremely difficult due to high star-to-planet contrasts and high angular resolutions. Nulling interferometry, which suppresses contaminating starlight via destructive interference, aims to meet this challenge. A pathfinder of this technique is the GLINT nuller: a 6-baseline, spectrally dispersed pupil-remapping interferometer deployed at the Subaru telescope, in which a single photonic chip performs all the critical optical processes. We present the instrument, novel data processing based on self-calibrating methods, laboratory characterization and the latest on-sky results.

In practice, technologies attempting to recover direct images of extra-solar planets run into noise floors governed by systematics (most notably, quasi-static speckles) before reaching fundamental limits (such as photon noise). To enhance detection reach to higher contrasts, discrimination by exploiting distinctive planetary signatures have been proposed. Here we explore a novel possibility: detecting exoplanets around bright variable stars based on the variability-phase difference between the speckles and the reflected light from the planet. Hot variable stars (the kind most favorable to this idea) host relatively distant Habitable Zones, which will allow a considerable phase delay to be displayed by planet in reflection. We have carried out a systematic series of simulations and analysis to explore the potential for this method. We show that this technique could improve contrast reach of an extreme-AO imagery by a factor of 5-10 against speckle noise.

Although discovery technologies are now populating exoplanet catalogs into the thousands, contemporary astronomy is poorly equipped to find the most compelling exoplanetary real-estate: earth-analog systems within our immediate solar neighbourhood. The TOLIMAN space telescope program aims to develop low-cost, agile mission concepts dedicated to astrometric detection of exoplanets within 10PC, and in particularly targeting the Alpha Cen system. It accomplishes this by deploying an innovative optical and signal encoding architecture that targets the most promising technique for this critical stellar sample: high precision astrometric monitoring. Two pathfinder missions, the first a cubesat slated for 2021 launch, and the second a 10cm space telescope under development at the University of Sydney. We will present an overview of the family of missions and the novel technologies underlying the signal detection strategy.

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging system installed at the 8-m Subaru Telescope on Maunakea, Hawaii. Due to its unique evolving design, SCExAO is both an instrument open for use by the international scientific community, and a testbed validating new technologies, which are critical to future high-contrast imagers on Giant Segmented Mirror Telescopes (GSMTs). Through multiple international collaborations over the years, SCExAO was able to test the most advanced technologies in wavefront sensors, real-time control with GPUs, low-noise high frame rate detectors in the visible and infrared, starlight suppression techniques or photonics technologies. Tools and interfaces were put in place to encourage collaborators to implement their own hardware and algorithms, and test them on-site or remotely, in laboratory conditions or on-sky. We are now commissioning broadband coronagraphs, the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) for high-speed speckle control, as well as a C-RED ONE camera for both polarization differential imaging and IR wavefront sensing. New wavefront control algorithms are also being tested, such as predictive control, multi-camera machine learning sensor fusion, and focal plane wavefront control. We present the status of the SCExAO instrument, with an emphasis on current collaborations and recent technology demonstrations. We also describe upgrades planned for the next few years, which will evolve SCExAO —and the whole suite of instruments on the IR Nasmyth platform of the Subaru Telescope— to become a system-level demonstrator of the Planetary Systems Imager (PSI), the high-contrast instrument for the Thirty Meter Telescope (TMT).

We present the current status of Hα high-contrast imaging observations with Subaru/Subaru Coronagraphic Extreme Adaptive Optics + VAMPIRES. Our adaptive optics correction at optical wavelengths in combination with (double) spectral differential imaging (SDI) and angular differential imaging (ADI) was capable of resolving a ring feature around omi Cet and detect the Hα counterpart of jet around RY Tau. We tested the post-processing by changing the order of ADI and SDI and both of the contrast limits achieved ∼10 − 3 to 5 × 10 − 4 at 0.3″, which is comparable to other Hα high-contrast imaging instruments in the Southern Hemisphere such as very large telescope (VLT)/spectro-polarimetric high-contrast exoplanet research, VLT/MUSE, and Magellan AO. Current wavefront sensing and adaptive optics correction at optical wavelengths empirically depend on airmass, and Subaru/VAMPIRES provide great opportunities for Hα high-contrast imaging for Northern Hemisphere targets.

The recent discovery of a spectacular dust plume in the system 2XMM J160050.7-514245 (referred to as "Apep") suggested a physical origin in a colliding-wind binary by way of the "Pinwheel" mechanism. Observational data pointed to a hierarchical triple-star system, however several extreme and unexpected physical properties seem to defy the established physics of such objects. Most notably, a stark discrepancy was found in the observed outflow speed of the gas as measured spectroscopically in the line-of-sight direction compared to the proper motion expansion of the dust in the sky plane. This enigmatic behaviour arises at the wind base within the central Wolf-Rayet binary: a system that has so far remained spatially unresolved. Here we present an updated proper motion study deriving the expansion speed of Apep's dust plume over a two-year baseline that is four times slower than the spectroscopic wind speed, confirming and strengthening the previous finding. We also present the results from high-angular-resolution near-infrared imaging studies of the heart of the system, revealing a close binary with properties matching a Wolf-Rayet colliding-wind system. Based on these new observational constraints, an improved geometric model is presented yielding a close match to the data, constraining the orbital parameters of the Wolf-Rayet binary and lending further support to the anisotropic wind model., Comment: This article has been accepted for publication in the Monthly Notices of the Royal Astronomical Society. 17 pages, 9 figures, 6 tables

Characterisation of exoplanets is key to understanding their formation, composition and potential for life. Nulling interferometry, combined with extreme adaptive optics, is among the most promising techniques to advance this goal. We present an integrated-optic nuller whose design is directly scalable to future science-ready interferometric nullers: the Guided-Light Interferometric Nulling Technology, deployed at the Subaru Telescope. It combines four beams and delivers spatial and spectral information. We demonstrate the capability of the instrument, achieving a null depth better than 10−3 with a precision of 10−4 for all baselines, in laboratory conditions with simulated seeing applied. On sky, the instrument delivered angular diameter measurements of stars that were 2.5 times smaller than the diffraction limit of the telescope. These successes pave the way for future design enhancements: scaling to more baselines, improved photonic component and handling low-order atmospheric aberration within the instrument, all of which will contribute to enhance sensitivity and precision., Nulling interferometry is a technique combining lights from different telescopes or apertures to observe weak sources nearby bright ones. The authors report the first nulling interferometer implemented in a photonic chip doing spectrally dispersed nulling on several baselines, simultaneously.

Infrared imaging of the colliding-wind binary Apep has revealed a spectacular dust plume with complicated internal dynamics that challenges standard colliding-wind binary physics. Such challenges can be potentially resolved if a rapidly-rotating Wolf-Rayet star is located at the heart of the system, implicating Apep as a Galactic progenitor system to long-duration gamma-ray bursts. One of the difficulties in interpreting the dynamics of Apep is that the spectral composition of the stars in the system was unclear. Here we present visual to near-infrared spectra that demonstrate that the central component of Apep is composed of two classical Wolf-Rayet stars of carbon- (WC8) and nitrogen-sequence (WN4-6b) subtypes. We argue that such an assignment represents the strongest case of a classical WR+WR binary system in the Milky Way. The terminal line-of-sight wind velocities of the WC8 and WN4-6b stars are measured to be $2100 \pm 200$ and $3500 \pm 100$ km s$^{-1}$, respectively. If the mass-loss rate of the two stars are typical for their spectral class, the momentum ratio of the colliding winds is expected to be $\approx$ 0.4. Since the expansion velocity of the dust plume is significantly smaller than either of the measured terminal velocities, we explore the suggestion that one of the Wolf-Rayet winds is anisotropic. We can recover a shock-compressed wind velocity consistent with the observed dust expansion velocity if the WC8 star produces a significantly slow equatorial wind with a velocity of $\approx$530 km s$^{-1}$. Such slow wind speeds can be driven by near-critical rotation of a Wolf-Rayet star., Accepted for publication in MNRAS, 10 pages, 9 figures, 1 table

Both the birth and death of a stellar system are areas of key scientific importance. Whether it's understanding the process of planetary formation in a star's early years, or uncovering the cause of the enormous mass-loss that takes place during a star's dying moments, a key to scientific understanding lies in the inner few AU of the circumstellar environment. Corresponding to scales of 10s of milli-arcseconds, these observations pose a huge technical challenge due to the high angular-resolutions and contrasts required. A major stumbling block is the problem of the Earth's own atmospheric turbulence. The other difficulty is that precise calibration is required to combat the extremely high contrast ratios and high resolutions faced. By taking advantage of the fact that starlight scattered by dust in the circumstellar region is polarized, differential polarimetry can help achieve this calibration. Spectral features can also be utilized.

As confirmed exoplanets climb into the thousands, the era of exoplanets discovery is giving way to exoplanet characterization. The most desirable scenario is one where the exoplanet can be directly imaged. Direct imaging not only delivers orbital parameters, but also yields the chemical composition of the atmosphere. The potential for habitable zone exoplanets to exhibit biosignatures in such data from a visionary future instrument drives intense interest. However, this requires to simultaneously reach extremely high star-to-planet contrast (from 104 to 108) and extremely high angular resolution (around and below the diffraction limit). Accomplishing all this through the atmosphere blurred by turbulence remains a critical challenge, yet it is one that nulling interferometry in combination with extreme adaptive optics aims to meet. This technique overcomes the contrast problem by removing the starlight with destructive interference, permitting the faint light coming from the planet to remain. In this paper, we present the latest evolution of nulling interferometry instrumentation: the integrated- photonic nuller. It allows spatial filtering, multiple simultaneous baselines, simultaneous photometric channels and simultaneous measurement of the "nulled" signal (the light emitted from the planet after cancelling the starlight) as well as the "anti-nulled" signal (the channel containing the redirected starlight). Exploiting these fundamental optical principles, the delivery of imaging and differential spectroscopy of exoplanetary systems becomes possible. This paper describes a pathfinder that has implemented these ideas into a robust and compact photonic-chip platform known as the GLINT (Guided-Light Interferometric Nulling Technology) project.

Imaging exoplanets requires high angular resolution and high contrast capability. Nulling interferometry with integrated-photonics technology can address these challenges. This paper presents GLINT, a nulling interferometer based on photonic technologies and its first on-sky results.

The characterization of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition, and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GLINT instrument is a photonic nulling interferometer with novel capabilities that has now been demonstrated in on-sky testing. The instrument fragments the telescope pupil into sub-apertures that are injected into waveguides within a single-mode photonic chip. Here, all requisite beam splitting, routing, and recombination are performed using integrated photonic components. We describe the design, construction, and laboratory testing of our GLINT pathfinder instrument. We then demonstrate the efficacy of this method on sky at the Subaru Telescope, achieving a null-depth precision on sky of ∼10−4 and successfully determining the angular diameter of stars (via their null-depth measurements) to milliarcsecond accuracy. A statistical method for analysing such data is described, along with an outline of the next steps required to deploy this technique for cutting-edge science.

The principal limitation in many areas of astronomy, especially for directly imaging exoplanets, arises from instability in the point spread function (PSF) delivered by the telescope and instrument. To understand the transfer function, it is often necessary to infer a set of optical aberrations given only the intensity distribution on the sensor—the problem of phase retrieval. This can be important for post-processing of existing data, or for the design of optical phase masks to engineer PSFs optimized to achieve high-contrast, angular resolution, or astrometric stability. By exploiting newly efficient and flexible technology for automatic differentiation, which in recent years has undergone rapid development driven by machine learning, we can perform both phase retrieval and design in a way that is systematic, user-friendly, fast, and effective. By using modern gradient descent techniques, this converges efficiently and is easily extended to incorporate constraints and regularization. We illustrate the wide-ranging potential for this approach using our new package, Morphine. Challenging applications performed with this code include precise phase retrieval for both discrete and continuous phase distributions, even where information has been censored such as heavily saturated sensor data. We also show that the same algorithms can optimize continuous or binary phase masks that are competitive with existing best solutions for two example problems: an apodizing phase plate coronagraph for exoplanet direct imaging, and a diffractive pupil for narrow-angle astrometry. The Morphine source code and examples are available open-source, with an interface similar to the popular physical optics package Poppy.

One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a novel hybridized photonic interferometer, with 8 simultaneous inputs, forming 28 baselines, the largest amount to-date. Utilizing different photonic fabrication technologies, we combine a 3D pupil remapper with a planar 8-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to $0.9^{\circ}$ over $8\pi$ phase piston error, relating to a detection contrast of $\sim6.5\times 10^{-4}$ on an Adaptive-Optics corrected 8-m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs., Comment: 10 pages, 10 figures, 1 table, submitted to Astrophotonics Special Issue in Applied Optics

Theory surrounding the origin of the dust-laden winds from evolved stars remains mired in controversy. Characterizing the formation loci and the dust distribution within approximately the first stellar radius above the surface is crucial for understanding the physics that underlie the mass-loss phenomenon. By exploiting interferometric polarimetry, we derive the fundamental parameters that govern the dust structure at the wind base of a red supergiant. We present near-infrared aperture-masking observations of Betelgeuse in polarimetric mode obtained with the NACO/SAMPol instrument. We used both parametric models and radiative transfer simulations to predict polarimetric differential visibility data and compared them to SPHERE/ZIMPOL measurements. Using a thin dust shell model, we report the discovery of a dust halo that is located at only 0.5 R$_{\star}$ above the photosphere (i.e. an inner radius of the dust halo of 1.5 R$_{\star}$). By fitting the data under the assumption of Mie scattering, we estimate the grain size and density for various dust species. By extrapolating to the visible wavelengths using radiative transfer simulations, we compare our model with SPHERE/ZIMPOL data and find that models based on dust mixtures that are dominated by forsterite are most favored. Such a close dusty atmosphere has profound implications for the dust formation mechanisms around red supergiants., Accepted in A&A, 10 pages, 20 figures

The Gemini Planet Imager (GPI) contains a 10-hole non-redundant mask (NRM), enabling interferometric resolution in complement to its coronagraphic capabilities. The NRM operates both in spectroscopic (integral field spectrograph, henceforth IFS) and polarimetric configurations. NRM observations were taken between 2013 and 2016 to characterize its performance. Most observations were taken in spectroscopic mode with the goal of obtaining precise astrometry and spectroscopy of faint companions to bright stars. We find a clear correlation between residual wavefront error measured by the AO system and the contrast sensitivity by comparing phase errors in observations of the same source, taken on different dates. We find a typical 5-$\sigma$ contrast sensitivity of $2-3~\times~10^{-3}$ at $\sim\lambda/D$. We explore the accuracy of spectral extraction of secondary components of binary systems by recovering the signal from a simulated source injected into several datasets. We outline data reduction procedures unique to GPI's IFS and describe a newly public data pipeline used for the presented analyses. We demonstrate recovery of astrometry and spectroscopy of two known companions to HR 2690 and HD 142527. NRM+polarimetry observations achieve differential visibility precision of $\sigma\sim0.4\%$ in the best case. We discuss its limitations on Gemini-S/GPI for resolving inner regions of protoplanetary disks and prospects for future upgrades. We summarize lessons learned in observing with NRM in spectroscopic and polarimetric modes., Comment: Accepted to AJ, 22 pages, 14 figures

Gravitational microlensing within the Galaxy offers the prospect of probing the details of distant stellar sources, as well as revealing the distribution of compact (and potentially non-luminous) masses along the line-of-sight. Recently, it has been suggested that additional constraints on the lensing properties can be determined through the measurement of the time delay between images through the correlation of the bunching of photon arrival times; an application of the Hanbury-Brown Twiss effect. In this paper, we revisit this analysis, examining the impact of decoherence of the radiation from a spatially extended source along the multiple paths to an observer. The result is that, for physically reasonable situations, such decoherence completely erases any correlation that could otherwise be used to measure the gravitational lensing time delay. Indeed, the divergent light paths traverse extremely long effective baselines at the lens plane, corresponding to extremes of angular resolving power well beyond those attainable with any terrestrial technologies; the drawback being that few conceivable celestial objects would be sufficiently compact with high enough surface brightness to yield usable signals., Comment: 4 pages, 1 figure, accepted for publication in MNRAS

The massive evolved Wolf-Rayet stars sometimes occur in colliding-wind binary systems in which dust plumes are formed as a result of the collision of stellar winds. These structures are known to encode the parameters of the binary orbit and winds. Here, we report observations of a previously undiscovered Wolf-Rayet system, 2XMM J160050.7-514245, with a spectroscopically determined wind speed of $\approx$3400 km s$^{-1}$. In the thermal infrared, the system is adorned with a prominent $\approx$12$''$ spiral dust plume, revealed by proper motion studies to be expanding at only $\approx$570 km s$^{-1}$. As the dust and gas appear coeval, these observations are inconsistent with existing models of the dynamics of such colliding wind systems. We propose that this contradiction can be resolved if the system is capable of launching extremely anisotropic winds. Near-critical stellar rotation is known to drive such winds, suggesting this Wolf-Rayet system as a potential Galactic progenitor system for long-duration gamma-ray bursts., Accepted to Nature Astronomy on 2018 Oct 1. 27 pages, 9 figures, and 4 tables

We present the first-ever images of the circumstellar environment of the carbon-rich AGB star II Lup in the infrared and sub-mm wavelengths, and the discovery of the envelope's non-spherical morphology with the use of high-angular resolution imaging techniques with the sparse aperture masking mode on NACO/VLT (that enables diffraction limited resolution from a single telescope) and with ALMA. We have successfully recovered images in $Ks$ (2.18$\mu$m), $L'$ (3.80$\mu$m) and $M'$ (4.78$\mu$m), that revealed the non-spherical morphology of the circumstellar envelope around II Lup. The stellar surface of the AGB star is unresolved (i.e. $\leq30$ mas in $Ks$) however the detected structure extends up to 110 mas from the star in all filters. Clumps have been found in the $Ks$ maps, while at lower emission levels a hook-like structure appears to extend counter-clockwise from the south. At larger spatial scales, the circumstellar envelope extends up to approximately 23 arcsec, while its shape suggests a spiral at four different molecules, namely CO, SiO, CS and HC$_3$N, with an average arm spacing of 1.7 arcsec which would imply an orbital period of 128 years for a distance of 590pc., Comment: 17 pages, 14 figures, accepted by MNRAS

The accumulation of aberrations along the optical path in a telescope produces distortions and speckles in the resulting images, limiting the performance of cameras at high angular resolution. It is important to achieve the highest possible sensitivity to faint sources such as planets, using both hardware and data analysis software. While analytic methods are efficient, real systems are better-modelled numerically, but such models with many parameters can be hard to understand, optimize and apply. Automatic differentiation software developed for machine learning now makes calculating derivatives with respect to aberrations straightforward for arbitrary optical systems. We apply this powerful new tool to enhance high-angular-resolution astronomical imaging. Self-calibrating observables such as the 'closure phase' or 'bispectrum' have been widely used in optical and radio astronomy to mitigate optical aberrations and achieve high-fidelity imagery. Kernel phases are a generalization of closure phases in the limit of small phase errors. Using automatic differentiation, we reproduce existing kernel phase theory within this framework and demonstrate an extension to the Lyot coronagraph, finding self-calibrating combinations of speckles which are resistant to phase noise, but only in the very high-wavefront-quality regime. As an illustrative example, we reanalyze Palomar adaptive optics observations of the binary alpha Ophiuchi, finding consistency between the new pipeline and the existing standard. We present a new Python package 'morphine' that incorporates these ideas, with an interface similar to the popular package poppy, for optical simulation with automatic differentiation. These methods may be useful for designing improved astronomical optical systems by gradient descent., Accepted ApJ

WR 112 is a dust-forming carbon-rich Wolf-Rayet (WC) binary with a dusty circumstellar nebula that exhibits a complex asymmetric morphology, which traces the orbital motion and dust formation in the colliding winds of the central binary. Unraveling the complicated circumstellar dust emission around WR 112 therefore provides an opportunity to understand the dust formation process in colliding-wind WC binaries. In this work, we present a multi-epoch analysis of the circumstellar dust around WR 112 using seven high spatial resolution (FWHM $\sim0.3-0.4''$) N-band ($\lambda \sim12$ $\mu$m) imaging observations spanning almost 20 years and includes newly obtained images from Subaru/COMICS in Oct 2019. In contrast to previous interpretations of a face-on spiral morphology, we observe clear evidence of proper motion of the circumstellar dust around WR 112 consistent with a nearly edge-on spiral with a $\theta_s=55^\circ$ half-opening angle and a $\sim20$-yr period. The revised near edge-on geometry of WR 112 reconciles previous observations of highly variable non-thermal radio emission that was inconsistent with a face-on geometry. We estimate a revised distance to WR 112 of $d = 3.39^{+0.89}_{-0.84}$ kpc based on the observed dust expansion rate and a spectroscopically derived WC terminal wind velocity of $v_\infty= 1230\pm260$ km s$^{-1}$. With the newly derived WR 112 parameters we fit optically-thin dust spectral energy distribution models and determine a dust production rate of $\dot{M}_d=2.7^{+1.0}_{-1.3}\times10^{-6}$ M$_\odot$ yr$^{-1}$, which demonstrates that WR 112 is one of the most prolific dust-making WC systems known.

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addition, SCExAO's unique design makes it the ideal instrument to test innovative technologies and algorithms quickly in a laboratory setup and subsequently deploy them on-sky. SCExAO benefits from a first stage of wavefront correction with the facility adaptive optics AO188, and splits the 600-2400 nm spectrum towards a variety of modules, in visible and near infrared, optimized for a large range of science cases. The integral field spectrograph CHARIS, with its J, H or K-band high-resolution mode or its broadband low-resolution mode, makes SCExAO a prime instrument for exoplanet detection and characterization. Here we report on the recent developments and scientific results of the SCExAO instrument. Recent upgrades were performed on a number of modules, like the visible polarimetric module VAMPIRES, the high-performance infrared coronagraphs, various wavefront control algorithms, as well as the real-time controller of AO188. The newest addition is the 20k-pixel Microwave Kinetic Inductance Detector (MKIDS) Exoplanet Camera (MEC) that will allow for previously unexplored science and technology developments. MEC, coupled with novel photon-counting speckle control, brings SCExAO closer to the final design of future high-contrast instruments optimized for Giant Segmented Mirror Telescopes (GSMTs)., 12 pages, 9 figures, conference proceedings (SPIE Astronomical telescopes and instrumentation 2018)

We propose an innovative low-cost mission capable of detecting potentially habitable planets around a sample of solartype stars near the sun. The finding of rocky planets in temperate orbits among our immediate stellar neighbors will be a signature discovery. Our mission will deliver relative measurements of stellar position and motion at sub-micro arcsecond precision. These data, in turn, will reveal the presence of orbiting exoplanets. For the case of our primary targets Alpha Centauri A and B, objects below one Earth mass will be accessible when the end-of-mission astrometric precision requirement of 0.4 micro arcsecond is achieved. TOLIMAN will directly reveal the presence of sub-earth mass planets and constrain it orbit and mass This paper describes the optical and mechanical architecture of the mission, and first order instrument design. We also explain the instrument stability requirements imposed by the diffractive pupil post-processing calibration limitations. Our design baseline is a stable two-mirror telescope that images the field directly on CCD camera minimizing the number of reflections and optical components.

The TOLIMAN space telescope is a low-cost, agile mission concept dedicated to astrometric detection of exoplanets in the near-solar environment, and particularly targeting the Alpha Cen system. Although successful discovery technologies are now populating exoplanetary catalogs into the thousands, contemporary astronomy is still poorly equipped to answer the basic question of whether there are any rocky planets orbiting any particular star system. Toliman will make a first study of stars within 10 PC of the sun by deploying an innovative optical and signal encoding architecture that leverages the most promising technology to deliver data on this critical stellar sample: high precision astrometric monitoring. Here we present results from the Foundational Mission Study, jointly funded by the Breakthrough Prize Foundation and the University of Sydney which has translated innovative underlying design principles into error budgets and potential spacecraft systems designs.

Accurate fringe tracking is essential for sensitive long-wavelength thermal background limited operation of the current Very Large Telescope Interferometry (VLTI) and future Planet Formation Imager (PFI) facilities. We present and simulate a dual fringe tracking and low-order adaptive optics concept based on a combination of non-redundant aperture interferometry and eigenphase in asymmetric pupil wavefront sensing. This scheme can acquire fringes at many wavelengths of path length offset between telescopes, even with moderate tilt offset and pupil shifts between beams. Once locked to fringes, our technique can also be used for simultaneous low-order wavefront sensing, and has near-optimum sensitivity where there is a dominant point-source image component. This concept is part of the Heimdallr visitor instrument currently being investigated for VLTI.

With many thousands of exoplanets discovered one of the important next steps in astronomy is to be able to characterise them. This presents a great challenge and calls for new observational capabilities with both high angular resolution and extreme high contrast in order to efficiently separate the bright light of a host star to that of a faint companion. Glint South is an instrument that uses photonic technology to perform nulling interferometry. The light of a star is cancelled out by means of destructive interference in a photonic chip. One of the challenges is the star light injection into the chip. This is done by a unique active system that optimises the injection and provide low order correction for the atmospheric turbulence. We are reporting on the latest progress following several tests on the Anglo Australian Telescope.

The year 2017 marks the 150th anniversary of Fizeau's celebrated paper which first suggested the idea of harnessing the then-infant technology of interferometry in the service of astrophysical measurement. This took the form of a mask, to be placed over the entrance pupil of a telescope to create what we would now term a Fizeau Interferometer. The experiment was successfully performed at Marseilles a few years later. Despite its antiquity, this deceptively simple idea is still with us and thriving beyond reasonable expectations today: an aperture mask that would be recognisable to Fizeau will fly aboard the James Webb Space Telescope. This paper highlights remarkable results at the very finest angular scales still being delivered by this technique, and prospects for future innovations on Fizeau's idea that may well extend the winning streak well into the future. In particular, the idea of strict non-redundancy usually enforced in the layout of masking arrays is subject to scrutiny.

The Planet Formation Imager (PFI) is a near- and mid-infrared interferometer project with the driving science goal of imaging directly the key stages of planet formation, including the young proto-planets themselves. Here, we will present an update on the work of the Science Working Group (SWG), including new simulations of dust structures during the assembly phase of planet formation and quantitative detection efficiencies for accreting and non-accreting young exoplanets as a function of mass and age. We use these results to motivate two reference PFI designs consisting of a) twelve 3m telescopes with a maximum baseline of 1.2km focused on young exoplanet imaging and b) twelve 8m telescopes optimized for a wider range of young exoplanets and protoplanetary disk imaging out to the 150K H2O ice line. Armed with 4x8m telescopes, the ESO/VLTI can already detect young exoplanets in principle and projects such as MATISSE, Hi-5 and Heimdallr are important PFI pathfinders to make this possible. We also discuss the state of technology development needed to make PFI more affordable, including progress towards new designs for inexpensive, small field-of-view, large aperture telescopes and prospects for Cubesat-based space interferometry., Comment: Presented at 2018 SPIE Astronomical Telescopes + Instrumentation, Austin, Texas, USA. See www.planetformationimager.org for more information