Search

The rate of passage (ROP) in the gastrointestinal tract (GIT) influences the exposure time of food to the digestion and absorption processes. Consequently, ROP affects the efficiency of nutrient utilization and energy from the diet. This study aimed to determine the physiological parameters that characterize the digestive response, such as first appearance time (FAT), ROP, mean retention time (MRT) and transit time (TT) in adult Japanese quail (Coturnix coturnix japonica), and to evaluate the effects of sex, apparent metabolizable energy corrected for nitrogen balance (AMEn) content in the diet and different types of markers on these parameters. In the first trial, we investigated the effects of sex and AMEn level (high- and low-energy diet) on the FAT parameter. Thirty-two male and 32 female Japanese quail were randomly allocated to 8 battery cages and assigned to 4 treatments in a 2 × 2 factorial design with 4 replicates of 4 birds for each treatment. To determine the FAT, ferric oxide (1%) was added to the diet, and the excreta of the quail was monitored until the first appearance of the marker. The results indicated significant differences (P < 0.05) in the FAT between males (100 min) and females (56 min), regardless of the AMEn content. In the second trial, thirty-two 32-week-old female Japanese quail in the laying phase were assigned to four treatments in a 2 × 2 factorial design, in which the main independent variables were type of marker (Cr or Ti) and AMEn level (high- and low-energy diets). In order to determine ROP (ET1%), MRT and TT (ET100%), the markers (0.5%: Cr2O3 and 0.5%: TiO2) were added to the diets, and the excreta were collected for 750 min. The excretion times for 1% (ET1%), 25% (ET25%), 50% (ET50%), 75% (ET75%) and 100% (ET100%) were estimated using cumulative excretion curves. No effect was detected for the AMEn level (P > 0.05); however, the effect of different marker types was significant (P < 0.05). This difference increased with time and ET100% was estimated to occur at 59 min. The ROP was estimated to be 68 min. The TT was estimated to be 540 min using Cr and 599 min using Ti, with an average MRT value of 0930 h. Taken together, our findings support the hypothesis that Japanese quail digestion through the GIT can be dynamic and differ based on sex or marker type. [ABSTRACT FROM AUTHOR]

Each individual in the population has a distinct maximum growth potential, and the growth curve may vary depending on the response to nutrient intake, growth phase and variability among animals. The present study aimed to (1) model weight gain (WG) response to methionine+cystine (Met+Cys) supply using different mathematical functions, (2) identify functions that better fit the growth responses of pullets, (3) determine the Met+Cys requirements that maximize WG based on breeding standards and (4) partition the Met+Cys requirements for WG and maintenance. Three trials were performed using 1448 laying-type pullets. We adopted a completely randomized design with eight treatments and six replicates. The first trial (2 to 6 weeks, P1) used 15 pullets per experimental unit. The second and third trials (8 to 12 weeks, P2; 14 to 18 weeks, P3) were used eight pullets per replicate. The Met+Cys levels were obtained using a dilution technique. The mathematical functions used to describe WG responses to Met+Cys intake were broken line, broken line with curvilinear ascendancy, Michaelis–Menten, saturation kinetics and three logistic and three exponential models. Models were selected using the Bayesian information criterion and evaluated by residual analysis. It was possible to model the responses using the studied functions. The best functions were obtained by logistic and sigmoidal models in P1 and P2, and with the broken line by the curvilinear ascendancy model in P3. The Met+Cys intake that determined the maximum potential for WG (WGmax) in P1, P2 and P3 were 313, 381 and 318 mg/day, respectively. The Met+Cys requirements for WG were 20, 22 and 27 mg/g, and for maintenance were 214, 53 and 30 mg/kgBW0.75 for P1, P2 and P3, respectively. [ABSTRACT FROM AUTHOR]

The description of the growth of the Japanese quails is necessary to characterize the genetic potential of these birds raised in different countries. Thus, the aim of this study was to describe the genetic potential of Japanese quails by conducting a meta-analysis considering studies conducted in different countries. Only data about the subspecies Coturnix coturnix japonica were considered; studies regarding Coturnix coturnix coturnix were not examined. The criteria investigated were BW (W), age (t), year of publication and location of the study. Each set of genetic material within a publication was coded as one study. The Gompertz function was used to interpret the growth of laying quails; thus, each study was represented by Gompertz parameters. The W and t data were applied to estimate the values of Gompertz growth parameters, including BW at maturity (Wm), BW at birth (Wi), maturity rate (B) and inflection point (IP). The age at which the maximum growth rate was achieved (t*) was calculated considering the parameters Wm, Wi and B. To estimate these parameters, random regression was used to randomize the parameter Wm. The parameters estimated for each assay were used in exploratory, grouping, and principal component analyses. The values of Wi ranged from 4.1 to 11.6 g. The values of B ranged from 0.0393 to 0.1039/day, and consequently, the values of t* and IP ranged from 14 to 31 days and 9.21 to 31.03 g, respectively. These results show that there is considerable variability in the growth potential of Japanese quails. To better understand this variation, two groups were examined: Brazil and other countries, according to the grouping of Wi, Wm, B and t*; parameter B was the variable that presented the highest specificity, indicating that both groups modified the maturity rate. For the principal component analysis, the year of publication showed a relationship with the growth parameters but only for studies performed in Brazil. For studies carried out in other countries, the changes in growth parameters were not related to the year of publication. In Brazilian studies, there was a decrease in the maturity rate, but the weight at maturity was higher. Therefore, it appears that different strategies of genetic selection were adopted in Brazil compared to other countries. [ABSTRACT FROM AUTHOR]

Micro-electromechanical systems (MEMS) are micro scale devices that are able to convert electrical energy into mechanical energy or vice versa. In this paper, the mathematical model of an electronic circuit of a resonant MEMS mass sensor, with time-periodic parametric excitation, was analyzed and controlled by Chebyshev polynomial expansion of the Picard interaction and Lyapunov-Floquet transformation, and by Optimal Linear Feedback Control (OLFC). Both controls consider the union of feedback and feedforward controls. The feedback control obtained by Picard interaction and Lyapunov-Floquet transformation is the first strategy and the optimal control theory the second strategy. Numerical simulations show the efficiency of the two control methods, as well as the sensitivity of each control strategy to parametric errors. Without parametric errors, both control strategies were effective in maintaining the system in the desired orbit. On the other hand, in the presence of parametric errors, the OLFC technique was more robust. [ABSTRACT FROM AUTHOR]

Experimental studies have shown that hatching rate depends, among other factors, on the main physical characteristics of the eggs. The physical parameters used in our work were egg weight, eggshell thickness, egg sphericity, and yolk per albumen ratio. The relationships of these parameters in the incubation process were modeled by Fuzzy logic. The rules of the Fuzzy modeling were based on the analysis of the physical characteristics of the hatching eggs and the respective hatching rate using a commercial hatchery by applying a trapezoidal membership function into the modeling process. The implementations were performed in software. Aiming to compare the Fuzzy with a statistical modeling, the same data obtained in the commercial hatchery were analyzed using multiple linear regression. The estimated parameters of multiple linear regressions were based on a backward selection procedure. The results showed that the determination coefficient and the mean square error were higher using the Fuzzy method when compared with the statistical modeling. Furthermore, the predicted hatchability rates by Fuzzy Logic agreed with hatching rates obtained in the commercial hatchery. [ABSTRACT FROM AUTHOR]

1. A nutrition model is described that may be used to optimise the amino acid nutrition of laying-type pullets prior to the onset of lay. It is not a method of optimising lifetime laying performance. 2. The potential growth and composition of the body, feathers, ovary and oviduct are described from hatching to the age at which sexual maturity is attained, from which the daily amino acid and energy requirements for the average individual in the population can be calculated. 3. There are two parts to the approach used, the first being a description of the model itself and the second being a description of how the required information was gathered. A number of assumptions made in developing the model are discussed. 4. The rates of maturing of the body, feather-free body and body protein of the DeKalb pullets used were shown to be constant at 0.017/d and those of feathers at 0.02/d. These are considerably slower than those of the oviduct and ovary (0.139 and 0.084/d respectively). The ovary attained a higher mature weight (78.4 vs. 58.7 g) than the oviduct. 5. The age at which the growth of the reproductive organs is initiated in the model is defined by the user. The daily amount of threonine required to meet the requirements for maintenance and potential growth of the developing tissues and organs is calculated for each day of the growing period from hatching to the age at which the first egg is laid. A method of calculating the required daily concentration of threonine in the feed is described, from which a feeding programme may be derived. 6. For the model to produce an optimum economic feeding programme for a population of laying-type pullets, more information than is available from this study is required. These issues are discussed in the paper.