Search

We report the discovery of a boundary-induced body-centered tetragonal (bct) iron phase in thin films deposited on MgAl$_{2}$O$_{4}$ ($001$) substrates. We present evidence for this phase using detailed x-ray analysis and ab-initio density functional theory calculations. A lower magnetic moment and a rotation of the easy magnetisation direction are observed, as compared to body-centered cubic (bcc) iron. Our findings expand the range of known crystal and magnetic phases of iron, providing valuable insights for the development of heterostructure devices using ultra-thin iron layers., Comment: Main text: 4 pages, 3 figures. Supplemental Material: 9 pages, 11 figures

Nitrogen-polar III-nitride heterostructures offer advantages over metal-polar structures in high frequency and high power applications. However, polarity control in III-nitrides is difficult to achieve as a result of unintentional polarity inversion domains (IDs). Herein, we present a comprehensive structural investigation with both atomic detail and thermodynamic analysis of the polarity evolution in low- and high-temperature AlN layers on on-axis and 4$^{\circ}$ off-axis Carbon-face 4H-SiC (000$\bar{1}$) grown by hot-wall metal organic chemical vapor deposition. A polarity control strategy has been developed by variation of thermodynamic Al supersaturation and substrate misorientation angle in order to achieve desired growth mode and polarity. We demonstrate that IDs are totally suppressed for high-temperature AlN nucleation layers when step-flow growth mode is achieved at the off-axis. We employ this approach to demonstrate high quality N-polar epitaxial AlGaN/GaN/AlN heterostructures., Comment: 9 pages, 6 figures

As a single-phase alloy, CrFeCoNi is a face centered cubic (fcc) material related to the archetypical high-entropy Cantor alloy CrFeCoNiMn. For thin films, CrFeCoNi of approximately equimolar composition tends to assume an fcc structure when grown at room temperature by magnetron sputtering. However, the single-phase solid solution state is typically not achieved for thin films grown at higher temperatures. The same holds true for Cantor alloy-based ceramics (nitrides and oxides), where phase formation is extremely sensitive to process parameters such as the amount of reactive gas. This study combines theoretical and experimental methods to understand the phase formation in nitrogen-containing CrFeCoNi thin films. Density functional theory calculations considering three competing phases (CrN, Fe-Ni and Co) show that the free energy of mixing, delta G of (CrFeCoNi)1-xNx solid solutions has a maximum at x = 0.20-0.25, and delta G becomes lower when x less than 0.20, greater than 0.25. Thin films of (CrFeCoNi)1-xNx (x = 0.14-0.41) grown by magnetron sputtering show stabilization of the metallic fcc when x lesser than or equal to 0.22 and the stabilization of the NaCl B1 structure when x is greater than 0.33, consistent with the theoretical prediction. In contrast, films with intermediate amounts of nitrogen (x = 0.22) grown at higher temperatures show segregation into multiple phases of CrN, Fe-Ni-rich and Co. These results offer an explanation for the requirement of kinetically limited growth conditions at low temperature for obtaining single-phase CrFeCoNi Cantor-like nitrogen-containing thin films and are of importance for understanding the phase-formation mechanisms in multicomponent ceramics.

Intercalation of non-van der Waals (vdW) layered materials can produce new 2D and 3D materials with unique properties, but it is difficult to achieve. Here, we describe a structural editing protocol for 3D non-vdW layered ternary carbides and nitrides (MAX phases) and their 2D vdW derivatives (MXenes). Gap-opening and species-intercalating stages were mediated by chemical scissors and guest intercalants, creating a large family of layered materials with unconventional elements and structures in MAX phases, as well as MXenes with versatile termination species. Removal of surface terminations by metal scissors and stitching of carbide layers by metal atoms leads to a reverse transformation from MXenes to MAX phases, and metal-intercalated 2D carbides. This scissor-mediated structural editing may enable structural and chemical tailoring of other layered ceramics.

The hot-wall metal-organic chemical vapor deposition (MOCVD), previously shown to enable superior III-nitride material quality and high performance devices, has been explored for Mg doping of GaN. We have investigated the Mg incorporation in a wide doping range ($2.45\times{10}^{18}~cm^{-3}$ up to $1.10\times{10}^{20}~cm^{-3}$) and demonstrate GaN:Mg with low background impurity concentrations under optimized growth conditions. Dopant and impurity levels are discussed in view of Ga supersaturation which provides a unified concept to explain the complexity of growth conditions impact on Mg acceptor incorporation and compensation. The results are analysed in relation to the extended defects, revealed by scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), and surface morphology, and in correlation with the electrical properties obtained by Hall effect and capacitance-voltage (C-V) measurements. This allows to establish a comprehensive picture of GaN:Mg growth by hot-wall MOCVD providing guidance for growth parameters optimization depending on the targeted application. We show that substantially lower H concentration as compared to Mg acceptors can be achieved in GaN:Mg without any in-situ or post-growth annealing resulting in p-type conductivity in as-grown material. State-of-the-art $p$-GaN layers with a low-resistivity and a high free-hole density (0.77 $\Omega$.cm and $8.4\times{10}^{17}~cm^{-3}$, respectively) are obtained after post-growth annealing demonstrating the viability of hot-wall MOCVD for growth of power electronic device structures., Comment: main: 11 pages, 8 figures - supplementary: 2 pages, 3 figures

We report on structure, vibrational properties and weak-antilocalization-(WAL-) induced quantum correction to magnetoconductivity in single crystal Bi2GeTe4. Surface band structure calculations show a single Dirac cone corresponding to topological surface states in Bi2GeTe4. An estimated phase coherence length, l_{\phi} ~ 143 nm and prefactor {\alpha} ~ - 1.54 from Hikami-Larkin-Nagaoka fitting of magnetoconductivity describe the quantum correction to conductivity. An anomalous temperature dependence of A1g Raman modes confirms enhanced electron-phonon interactions. Our results establish the involvement of vibrations of Bi-Te with existence of topological surface states and WAL in Bi2GeTe4.

Solid-state precipitation can be used to tailor materials properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge-carrier transmission. Here, we uncover unconventional dual Janus-type nanoprecipitates in Mg3Sb1.5Bi0.5 formed by side-by-side Bi- and Ge-rich appendages, in contrast to separate nanoprecipitate formation. These Janus nanoprecipitates result from local co-melting of Bi and Ge during sintering, enabling an amorphous-like lattice thermal conductivity. A precipitate size effect on phonon scattering is observed due to the balance between alloy-disorder and nanoprecipitate scattering. The thermoelectric figure-of-merit ZT reaches 0.6 near room temperature and 1.6 at 773 K. The Janus nanoprecipitation can be introduced into other materials and may act as a general property-tailoring mechanism.

Two dimensional (2D) ferromagnetic materials have attracted much attention in the fields of condensed matter physics and materials science, but their synthesis is still a challenge given their limitations on structural stability and susceptibility to oxidization. MAX phases nanolaminated ternary carbides or nitrides possess a unique crystal structure in which single-atom-thick A sublayers are interleaved by two dimensional MX slabs, providing nanostructured templates for designing 2D ferromagnetic materials if the non-magnetic A sublayers can be substituted replaced by magnetic elements. Here, we report three new ternary magnetic MAX phases (Ta2FeC, Ti2FeN and Nb2FeC) with A sublayers of single-atom-thick 2D iron through an isomorphous replacement reaction of MAX precursors (Ta2AlC, Ti2AlN and Nb2AlC) with a Lewis acid salts (FeCl2). All these MAX phases exhibit ferromagnetic (FM) behavior. The Curie temperature (Tc) of Ta2FeC and Nb2FeC MAX phase are 281 K and 291 K, respectively, i.e. close to room temperature. The saturation magnetization of these ternary magnetic MAX phases is almost two orders of magnitude higher than that of V2(Sn,Fe)C MAX phase whose A-site is partial substituted by Fe. Theoretical calculations on magnetic orderings of spin moments of Fe atoms in these nanolaminated magnetic MAX phases reveal that the magnetism can be mainly ascribed to intralayer exchange interaction of the 2D Fe atomic layers. Owning to the richness in composition of MAX phases, there is a large compositional space for constructing functional single-atom-thick 2D layers in materials using these nanolaminated templates.

The class of two-dimensional metal carbides and nitrides known as MXenes offer a distinct manner of property tailoring for a wide range of applications. The ability to tune the surface chemistry for expanding the property space of MXenes is thus an important topic, although experimental exploration of new surface terminals remains a challenge. Here, we synthesized Ti3C2 MXene with unitary, binary and ternary halogen terminals, e.g. -Cl, -Br, -I, -BrI and -ClBrI, to investigate the effect of surface chemistry on the properties of MXenes. The electrochemical activity of Br and I element result in the extraordinary electrochemical performance of the MXenes as cathodes for aqueous zinc ion batteries. The -Br and -I containing MXenes, e.g. Ti3C2Br2 and Ti3C2I2, exhibit distinct discharge platforms with considerable capacities of 97.6 mAh g-1 and 135 mAh g-1. Ti3C2(BrI) and Ti3C2(ClBrI) exhibit dual discharge platforms with capacities of 117.2 mAh g-1 and 106.7 mAh g-1. In contrast, the previously discovered MXenes Ti3C2Cl2 and Ti3C2(OF) exhibit no discharge platforms, and only ~50% of capacities and energy densities of Ti3C2Br2. These results emphasize the effectiveness of the Lewis-acidic-melt etching route for tuning the surface chemistry of MXenes, and also show promise for expanding the MXene family towards various applications.

Two-dimensional carbides and nitrides of transition metals, known as MXenes, are a fast-growing family of 2D materials that draw attention as energy storage materials. So far, MXenes are mainly prepared from Al-containing MAX phases (where A = Al) by Al dissolution in F-containing solution, but most other MAX phases have not been explored. Here, a redox-controlled A-site-etching of MAX phases in Lewis acidic melts is proposed and validated by the synthesis of various MXenes from unconventional MAX phase precursors with A elements Si, Zn, and Ga. A negative electrode of Ti3C2 MXene material obtained through this molten salt synthesis method delivers a Li+ storage capacity up to 738 C g-1 (205 mAh g-1) with high-rate performance and pseudocapacitive-like electrochemical signature in 1M LiPF6 carbonate-based electrolyte. MXene prepared from this molten salt synthesis route offer opportunities as high-rate negative electrode material for electrochemical energy storage applications.

This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging between 500 and 900 {\deg}C. The presence of Al within the carbide structure was evidenced by lattice parameter variations. Furthermore, chemical analyses showed that the Al distribution throughout the film thickness was fairly homogeneous. Thicker films (80-90 nm) deposited from the same compound target consisted of the pseudo-binary (Ti,Zr)C and intermetallic compounds in the Ti-Zr-Al system up to 800 {\deg}C, as well as solid solution MAX phases with different Ti:Zr ratios at 900 {\deg}C. X-ray diffraction and transmission electron microscopy showed that both (Ti,Zr)2AlC and (Ti,Zr)3AlC2 solid solution MAX phases were formed. Moreover, this work discusses the growth mechanism of the thicker films, which started with the formation of the mixed (Ti,Zr)C carbide, followed by the nucleation and growth of aluminides, eventually leading to the formation of the MAX phases, which was the primary objective of the sputter depositions.

Tailoring of individual single-atom-thick layers in nanolaminated materials offers atomic-level control over material properties. Nonetheless, multielement alloying in individual atomic layers in nanolaminates is largely unexplored. Here, we report a series of inherently nanolaminated V2(A'xSn1-x)C (A'=Fe, Co, Ni and Mn, and combinations thereof, with x=1/3) synthesized by an alloy-guided reaction. The simultaneous occupancy of the four magnetic elements and Sn, the individual single-atom-thick A layers in the compound constitute high-entropy-alloy analogues, two-dimensional in the sense that the alloying exclusively occurs in the A layers. V2(A'xSn1-x)C exhibit distinct ferromagnetic behavior that can be compositionally tailored from the multielement A-layer alloying. This two-dimensional alloying provides a structural-design route with expanded chemical space for discovering materials and exploit properties.

New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts, indicating that they are precursor candidates for MXene derivation., Comment: author name corrected

Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element atom (Zn in the present case) to occupy the A site in the pre-existing MAX phase structure. Using this replacement reaction between Zn element from molten ZnCl2 and Al element in MAX phase precursors (Ti3AlC2, Ti2AlC, Ti2AlN, and V2AlC), novel MAX phases Ti3ZnC2, Ti2ZnC, Ti2ZnN, and V2ZnC were synthesized. When employing excess ZnCl2, Cl terminated MXenes (such as Ti3C2Cl2 and Ti2CCl2) were derived by a subsequent exfoliation of Ti3ZnC2 and Ti2ZnC due to the strong Lewis acidity of molten ZnCl2. These results indicate that A-site element replacement in traditional MAX phases by late transition metal halides opens the door to explore MAX phases that are not thermodynamically stable at high temperature and would be difficult to synthesize through the commonly employed powder metallurgy approach. In addition, this is the first time that exclusively Cl-terminated MXenes were obtained, and the etching effect of Lewis acid in molten salts provides a green and viable route to prepare MXenes through an HF-free chemical approach., Comment: Title changed; experimental section and discussion revised