Search

Noa Alon,1,3,* Yana Miroshnikov,2,3,* Nina Perkas,2,3 Ifat Nissan,2,3 Aharon Gedanken,2,3 Orit Shefi1,31Faculty of Engineering, 2Department of Chemistry, 3Bar-Ilan Institute of Nanotechnology and Advanced Materials, Bar-Ilan University, Ramat Gan, Israel*These authors contributed equally to this workAbstract: Much effort has been devoted to the design of effective biomaterials for nerve regeneration. Here, we report the novel use of silver nanoparticles (AgNPs) as regenerative agents to promote neuronal growth. We grew neuroblastoma cells on surfaces coated with AgNPs and studied the effect on the development of the neurites during the initiation and the elongation growth phases. We find that the AgNPs function as favorable anchoring sites, and the growth on the AgNP-coated substrates leads to a significantly enhanced neurite outgrowth. Cells grown on substrates coated with AgNPs have initiated three times more neurites than cells grown on uncoated substrates, and two times more than cells grown on substrates sputtered with a plain homogenous layer of silver. The growth of neurites on AgNPs in the elongation phase was enhanced as well. A comparison with substrates coated with gold nanoparticles (AuNPs) and zinc oxide nanoparticles (ZnONPs) demonstrated a clear silver material-driven promoting effect, in addition to the nanotopography. The growth on substrates coated with AgNPs has led to a significantly higher number of initiating neurites when compared to substrates coated with AuNPs or ZnONPs. All nanoparticle-coated substrates affected and promoted the elongation of neurites, with a significant positive maximal effect for the AgNPs. Our results, combined with the well-known antibacterial effect of AgNPs, suggest the use of AgNPs as an attractive nanomaterial – with dual activity – for neuronal repair studies.Keywords: nerve regeneration, nanotopography, antibacterial material, neuroblastoma, gold nanoparticles, zinc oxide nanoparticles

A complete mesoporous iron-titanium oxide was synthesized by ultrasound irradiation. The sonochemical technique and the surfactant templating method were used to prepare mesoporous iron oxide-titania.

Abstract: Two model catalysts, Au/TiO2/C (S) (sonochemically derived) and Au/TiO2/C (M) (microwave derived), were produced by employing ultrasound irradiation and microwave irradiation, respectively. The deposition of gold colloids onto the support powders, TiO2/C, was accomplished by using a solvated metal atom impregnation (SMAI) method. The SMAI technique provides highly-dispersed gold particles on the TiO2/C support. The catalytic performance of Au based catalysts 1wt% Au–TiO2/C (S) and 1wt%Au–TiO2(M)/C (M) have been tested for the oxidation of CO in the temperature range of 0–300°C and compared to that of 1wt% Au–TiO2 (Degussa-P25). A boost in the conversion of CO was observed for the sonochemically-derived catalyst, Au/TiO2/C (S), at low temperature. Hence, the reactivity order found for CO oxidation is (Au/TiO2/C (S)>Au/TiO2 (P25)>Au/TiO2/C (M)). [Copyright &y& Elsevier]

Abstract: The effect of SBA-15 microporosity on the crystal size of TiO2 was investigated employing SBA-15 materials with high (SBA-15-HM) and low (SBA-15-LM) microporosities (14.2% and 4.7% of microporous volume, respectively). TiO2 phase was incorporated inside SBA-15 using internal hydrolysis method over a wide range of loadings (7–63wt%). At all loadings, TiO2 inside SBA-15 pores was in the form of anatase nanocrystals as found in characteristic Raman spectra. The crystal size of TiO2 anatase phase was determined by Raman spectroscopy using a correlation between Raman peak position and peak width and TiO2 crystal size. The correlation was established based on the set of unsupported TiO2 samples with the crystals size in the range 5–120nm (BET and XRD). Using this correlation, it was found that the crystal size of TiO2 inside SBA-15 with high microporosity was lower than inside SBA-15 with low microporosity. This is a direct proof of the effect of wall microporosity on the dispersion of TiO2 inside SBA-15. Due to the higher TiO2 dispersion, TiO2/SBA-15-HM adsorbed more vanadia than TiO2/SBA-15-LM at the same TiO2 loadings. As a result, V2O5/TiO2/SBA-15-HM displayed higher activity than V2O5/TiO2/SBA-15-LM in NO SCR with ammonia. [Copyright &y& Elsevier]

Catheter-associated urinary tract infections (CAUTI) are among the most common bacterial infections associated with prolonged hospitalization and increased healthcare expenditures. Despite recent advances in the prevention and treatment of these infections, there are still many challenges remaining, among them the creation of a durable catheter coating, which prevents bacterial biofilm formation. The current work reports on a method of protecting medical tubing endowed with antibiofilm properties. Silicone catheters coated sonochemically with ZnO nanoparticles (NPs) demonstrated excellent antibiofilm effects. Toward approval by the European Medicines Agency, it was realized that the ZnO coating would not withstand the regulatory requirements of avoiding dissolution for 14 days in artificial urine examination. Namely, after exposure to urine for 14 days, the coating amount was reduced by 90%. Additional coatings with either carbon or silica maintained antibiofilm activity against Staphylococcus aureus while resisting dissolution in artificial urine for 14 days (C- or SiO 2 -protected catheters exhibited only 29% reduction). HR-SEM images of the protected catheters indicate the presence of the ZnO coating as well as the protective layer. Antibiofilm activity of all catheters was evaluated both before and after exposure to artificial urine. It was shown that before artificial urine exposure, all coated catheters showed high antibiofilm properties compared to the uncoated control. Exposure of ZnO-coated catheters, without the protective layer, to artificial urine had a significant effect exhibited by the decrease in antibiofilm activity by almost 2 orders of magnitude, compared to unexposed catheters. Toxicity studies performed using a reconstructed human epidermis demonstrated the safety of the improved coating. Exposure of the epidermis to ZnO catheter extracts in artificial urine affects tissue viability compared with control samples, which was not observed in the case of ZnO NPs coating with SiO 2 or C. We suggest that silica and carbon coatings confer some protection against zinc ions release, improving ZnO coating safety.

The identification of health risks arising from occupational exposure to submicron/nanoscale materials is of particular interest and toxicological investigations designed to assess their hazardous properties can provide valuable insights. The core-shell polymers poly (methyl methacrylate)@poly (methacrylic acid-co-ethylene glycol dimethacrylate) [PMMA@P (MAA-co-EGDMA)] and poly (n-butyl methacrylate-co-ethylene glycol dimethacrylate)@poly (methyl methacrylate) [P (nBMA-co-EGDMA)@PMMA] could be utilized for the debonding of coatings and for the encapsulation and targeted delivery of various compounds. The hybrid superabsorbent core-shell polymers poly (methacrylic acid-co-ethylene glycol dimethacrylate)@silicon dioxide [P (MAA-co-EGDMA)@SiO 2 ] could be utilized as internal curing agents in cementitious materials. Therefore, the characterization of their toxicological profile is essential to ensure their safety throughout manufacturing and the life cycle of the final products. Based on the above, the purpose of the present study was to assess the acute toxic effects of the above mentioned polymers on cell viability and on cellular redox state in EA. hy926 human endothelial cells and in RAW264.7 mouse macrophages. According to our results, the examined polymers did not cause any acute toxic effects on cell viability after any administration. However, the thorough evaluation of a panel of redox biomarkers revealed that they affected cellular redox state in a cell-specific manner. As regards EA. hy926 cells, the polymers disrupted redox homeostasis and promoted protein carbonylation. Concerning RAW264.7 cells, P (nBMA-co-EGDMA)@PMMA caused disturbances in redox equilibrium and special emphasis was placed on the triphasic dose-response effect detected in lipid peroxidation. Finally, P (MAA-co-EGDMA)@SiO 2 activated cellular adaptive mechanisms in order to prevent from oxidative damage., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Inc.)

The demand for improved indoor air quality, especially during the pandemic of Covid-19, has led to renewed interest in antiviral and antibacterial air-conditioning systems. Here, air filters of vehicles made of nonwoven polyester filter media were sonochemically coated with CuO nanoparticles by a roll-to-roll coating method. The product, aimed at providing commuters with high air quality, showed good stability and mechanical properties and potent activity against Escherichia coli and Staphylococcus aureus bacteria, H1N1 influenza, and two SARS-CoV-2 variants. The filtering properties of a coated filter were tested, and they were similar to those of the uncoated filter. Leaching tests as a function of airflow were conducted, and the main outcome was that the coating was stable and particles were not detached from the coated media. Extension to other air-conditioning systems was straightforward.

Sonochemistry was applied in the last few years for coating surfaces of various substrates for imparting desired properties to the surface. In the current paper the coating of cucumbers with NaCl nanoparticles and apples with honey nanoparticles was accomplished by applying the sonochemical method. In both coating the nanoparticles were deposited from aqueous solutions. The products were characterized by Inductively coupled plasma, Dynamic light scattering, Scanning electron microscopy, and Nuclear magnetic resonance., (© Association of Food Scientists & Technologists (India) 2021.)