Search

The A-band of oxygen has been measured at low resolution at temperatures between 90 K and 373 K using the phase shift cavity ring down (PS-CRD) technique. For temperatures between 90 K and 295 K, the PS-CRD technique presented here involves an optical cavity attached to a cryostat. The static cell and mirrors of the optical cavity are all inside a vacuum chamber at the same temperature of the cryostat. The temperature of the cell can be changed between 77 K and 295 K. For temperatures above 295 K, a hollow glass cylindrical tube without windows has been inserted inside an optical cavity to measure the temperature of air flowing through the tube. The cavity consists of two highly reflective mirrors which are mounted parallel to each other and separated by a distance of 93 cm. In this experiment, air is passed through a heated tube. The temperature of the air flowing through the tube is determined by measuring the intensity of the oxygen absorption as a function of the wavenumber. The A-band of oxygen is measured between 298 K and 373 K, with several air flow rates. To obtain the temperature, the energy of the lower rotational state for seven selected rotational transitions is linearly fitted to a logarithmic function that contains the relative intensity of the rotational transition, the initial and final rotational quantum numbers, and the energy of the transition. Accuracy of the temperature measurement is determined by comparing the calculated temperature from the spectra with the temperature obtained from a calibrated thermocouple inserted at the center of the tube. This flowing air temperature sensor will be used to measure the temperatures of cooling air at the input (cold air) and output (hot air) after cooling the blades of a laboratory gas turbine. The results could contribute to improvements in turbine blade cooling design.

Phase shift cavity ring down and Fourier transform IR techniques have been used to observe the C-H stretch fundamental and overtone absorptions of the acetylenic (Δυ = 1-5) and methyl (Δυ = 1-6) C-H bonds of trimethyl-silyl-acetylene [(CH3)3CSi≡CH] at 295 K. Harmonic frequencies ω(ν1), ω(a), and ω(s) and anharmonicities x(ν1), ω(a)x(a), ω(s)x(s) were calculated for the acetylenic, methyl out-of-plane, and methyl in-plane C-H bonds, respectively. The harmonically coupled anharmonic oscillator (HCAO) model was used to determine the overtone energy levels and assign the absorption bands to vibrational transitions of methyl C-H bonds. A hot band, assigned as υν1 + ν24 - ν24 is observed for transitions with Δυ = 1-5 in a region near the acetylenic stretch. The intensity of the hot band is reduced considerably at 240 K. The strength of a Fermi resonance between C-Ha transition (υν(a)) and the combination band ((υ-1)ν(a) + 2ν(bend)) with (υ = 3-6) was calculated using the experimental perturbed energies and relative intensities. The main bands are separated by computer deconvolution and are integrated at each level to get the experimental band strengths. For methyl absorptions, the dipole moment function is expanded as a function of two C-H stretching coordinates and the intensities are calculated in terms of the HCAO model where only the C-H modes are considered. Acetylenic intensities are derived with a one dimensional dipole moment function. The expansion coefficients are obtained from molecular orbital calculations. The intensities are calculated without using adjustable parameters and they are of the same order of magnitude of the experimental intensities for all C-H transitions.

The vibrational overtone spectra of the acetylenic (Δυ = 4, 5) and methyl (Δυ = 5, 6) C-H stretch transitions of tert-butyl acetylene [(CH(3))(3)C-C≡C-H] were obtained using the phase shift cavity ring down (PS-CRD) technique at 295 K. The C-H stretch fundamental and overtone absorptions of the acetylenic (Δυ = 2 and 3) and methyl (Δυ = 2-4) C-H bonds have been obtained using a Fourier transform infrared and near-infrared spectrophotometer. Harmonic frequency ω(ν(1)) and anharmonicities x(ν(1)) and x(ν(1), ν(24)) are reported for the acetylenic C-H bond. Molecular orbital calculations of geometry and vibrational frequencies were performed. A harmonically coupled anharmonic oscillator (HCAO) model was used to determine the overtone energy levels and assign the absorption bands to vibrational transitions of methyl C-H bonds. Band strength values were obtained experimentally and compared with intensities calculated in terms of the HCAO model where only the C-H modes are considered. No adjustable parameters were used to get order of magnitude agreement with experimental intensities for all pure local mode C-H transitions.

The C-H stretch fundamental and overtone absorptions of CHD(3) have been obtained using Fourier transform infrared (FTIR), near-infrared, and phase shift and pulsed cavity ring down (CRD) techniques at temperatures between 84 and 297 K. The partially resolved rotational-vibrational spectra of CHD(3) that included the fundamental transition nu(1), the overtone transitions, and combination bands 5nu(1) and 4nu(1) + 2nu(5) and 6nu(1) and 5nu(1) + 2nu(5) were obtained and compared with the simulated spectra at the corresponding temperature. The strength of the Fermi resonance between levels upsilonnu(1) and (upsilon - 1)nu(1) + 2nu(5) with upsilon = 2-6 was calculated using the experimental perturbed energies and relative peak intensities. The integrated absorption was calculated as a function of the density of the gas samples and used to obtain the cross section and the band strength of the Deltaupsilon = 5 and 6 transitions. Ab initio molecular orbital calculations were done to obtain the dipole moment function (DMF) as a function of the C-H internuclear distance. Intensity calculations with the DMF correctly predict the order of magnitude of the experimental band strengths.