Search

Carbon fiber (CF) was coated with micro-fibrillated cellulose (MFC) using vacuum-assisted deposition in aqueous suspensions at concentrations of 0.1%, 0.2%, and 0.4%. The impact of distribution mesh configurations (DM arrangements) and fabric layer configuration on cellulose deposition was examined. Multiscale CF-MFC-Epoxy composites were created using resin infusion under flexible tooling, forming a 3D network of MFC between CFs that transferred stress and acted as a node at the intersection of 0–90 bundles. The addition of 0.1% MFC suspensions improved flexural properties, using no distribution media enhanced deposition and penetration efficiency, and drying stacked layers of CF fabrics improved load transference between them. This combination of parameters resulted in composites with a 16% increase in flexural modulus and 45% increase in flexural strength. [ABSTRACT FROM AUTHOR] more...

Copyright of International Journal of Medicine & Science of Physical Activity & Sport / Revista Internacional de Medicina y Ciencias de la Actividad Física y del Deporte is the property of Revista Internacional de Medicina y Ciencias de la Actividad Fisica y del Deporte and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) more...

OBJECTIVE: The aim of the present study was to compare the molecular and morphological effects of diacerein and glucosamine-chondroitin drug treatment and intra-articular injection therapy of human deciduous dental pulp stem cells (hDPSCs) in a rat knee model of induced osteoarthritis (OA). MATERIALS AND METHODS: Thirty-six adult male rats were randomly separated into six groups: Control group (without induction of OA), osteoarthritis group 60 (induction of OA, saline gavage started on day 14 and performed for 60 days, followed by euthanasia), osteoarthritis group (induction of OA and euthanasia after 14 days), diacerein group, glucosamine-chondroitin group, and mesenchymal stem cell group. The drug-treated groups were gavaged with 50 mg/kg of diacerein and 400/500 mg/kg of glucosamine-chondroitin starting on dat 14 for 60 days. The cell therapy-treated group received an intra-articular single dose of 8 × 105 hDPSCs on day 14, and euthanasia was performed after 60 days. Lateral femoral condyles were collected and prepared for immunohistochemistry and light microscopy procedures. RESULTS: The morphological features and immunoexpression of SOX-5, IHH, MMP-8, MMP-13, and Type II collagen were statistically analysed. Our data suggest that hDPSC therapy contributes more actively and effectively in the structural reorganization of lateral femoral condyles. In contrast, the glucosamine-chondroitin sulphate treatment was more effective in inflammatory control, while diacerein showed better results associated with the maintenance of the primordial cartilage. CONCLUSIONS: The positive therapeutic effect of daily administered conventional drugs can be confirmed in a rat model of OA. However, one single dose of locally administered hDPSCs provides significant improvement in tissue regeneration in an OA model. [ABSTRACT FROM AUTHOR] more...

Photonic and electronic properties exist inherently in ferroelectric barium titanate (BaTiO3); severe luminescence quenching also exists due to the insufficient confinement of excitons. In this sense, high optical emission can only be achieved by its chemical and structural modification. Thin BaTiO3 and Er:BaTiO3 films were grown by the spin coating method on a glass substrate at room temperature. Self-trapping of excitons in the thin BaTiO3 film and its structural modification due to the doping with Er3+ ions (Er:BaTiO3) are verified using scanning confocal fluorescence microscopy (SCFM), where self-trapping excitons never occured in its pure state. By thermal treatment and doping (BaTiO3 and Er:BaTiO3) we obtained localization of the excitons, which would further induce lattice strain around the surface defects, to accommodate the self-trapped excitons. With such a self-trapped state, the structure of BaTiO3 generates broadband emission of several overlapping bands between 1.95 and 2.65 eV at room temperature, while the structure Er:BaTiO3 showed defined emission bands at 2.24 and 2.35 eV, with very weak contributions of the emission due to the self-trapping state. The influence of the variation of the excitation wavelength using 1PE and 2PE on the emission bands of BaTiO3 and Er:BaTiO3 is also investigated. The results of enhanced emission bands suggest a clear dependence of the emission intensity on the excitation energy, where a ∼3 fold enhancement in emission has been demonstrated under Er3+ (1.55 eV) excitation, which can be attributed to effective energy transfer between the Er3+ ions. As a result, it is concluded that the developed BaTiO3 and Er:BaTiO3 can pave the way for future photonic devices. [ABSTRACT FROM AUTHOR] more...

This work reports on the magnetic properties of Ge100-xMnx (x=0-24 at. %) films prepared by cosputtering a Ge+Mn target and submitted to cumulative thermal annealing treatments up to 500 °C. Both as-deposited and annealed films were investigated by means of compositional analysis, Raman scattering spectroscopy, magnetic force microscopy, superconducting quantum interference device magnetometry, and electrical resistivity measurements. All as-deposited films (either pure or containing Mn) exhibit an amorphous structure, which changes to crystalline as the annealing treatments are performed at increasing temperatures. In fact, the magnetic properties of the present Ge100-xMnx films are very sensitive to the Mn content and whether their atomic structure is amorphous or crystalline. More specifically: whereas the amorphous Ge100-xMnx films (with high x) present a characteristic spin glass behavior at low temperature; after crystallization, the films (with moderate Mn contents) are ferromagnetic at room temperature. Moreover, the magnetic behavior of the films scales with their Mn concentration and tends to be more pronounced after crystallization. Finally, the semiconducting behavior of the films, experienced by previous optical studies, was confirmed through electrical measurements, which also indicate the dependence of the resistivity with the atomic composition of the films. [ABSTRACT FROM AUTHOR] more...