Search

Laser-induced graphene from paper (paper-LIG) was applied in non-enzymatic electrochemical sensing of uric acid (UA) in human urine. Paper-LIG was formed by CO 2 laser modification of paper into a 3D graphene arrangement. Kinetic analysis of paper-LIG electrodes returned effective heterogeneous electron transfer standard rate constants of 1.4 × 10−3 cm s−1 and 7.8 × 10−4 cm s−1 for [Ru(NH 3) 6 ]2+/3+ and [Fe(CN) 6 ]4−/3− redox probes, respectively. These electrodes were able to detect and quantify uric acid in PBS within the 10–300 μM range at pH between 5.6 and 7.4. At pH 7.4, a linear response (R2 = 0.999) from 10 to 250 μM was achieved, with a limit of detection of 3.97 μM and a sensitivity of 0.363 μA cm−2 μM−1. Paper-LIG electrodes denoted adequate selectivity in synthetic urine as well as in ascorbic acid (AA) and dopamine (DA)-containing electrolytes. Determination of urinary UA content in human samples returned a concentration of c.a. 1.8–1.9 mM, within the range for healthy individuals. Recoveries of samples spiked with 50 and 100 μM UA were 100.6% and 95.4%, respectively, with satisfactory reproducibility and stability. These cheap, lightweight, flexible, and eco-friendly paper-LIG biosensors for non-enzymatic quantification of UA in human urine pave the way to widespread application in the detection of other important biomarkers. [Display omitted] • "Green" graphene electrodes by CO 2 laser irradiation of paper ("paper-LIG"). • Uric acid (UA) quantification at clinically relevant concentrations and pH (5.6–7.4). • Limit of detection of 3.97 μM and a sensitivity of 0.363 μA cm−2 μM−1 (pH = 7.4). • Adequate selectivity in synthetic urine, as well as in ascorbic acid and dopamine-containing electrolytes. • Recoveries of 100.6% and 95.4% for human urine samples spiked with 50 and 100 μM UA. [ABSTRACT FROM AUTHOR]

Laser‐induced graphene (LIG) is inexpensive, fast, and easy to produce when compared to many other forms of graphene. Within the biosensing field, LIG electrodes are most often produced via infrared (IR) laser irradiation of polyimide sheets. Nevertheless, the usage of ultraviolet (UV) laser to produce LIG provides advantages in terms of sensor miniaturization because of its inherently higher scribing resolution. Yet, studies on the electrochemical performance of UV LIG, its relation with morphological and structural aspects as well as its comparison with IR LIG are still lacking. This work shows that both LIGs present swift electron transfer kinetics constituting excellent electrodes for electroanalysis. Extreme sensitivities of 93 and 58 µA µm−1 cm−2 at physiologically relevant dopamine (DA) concentrations are found for IR and UV LIG, respectively. Such sensitivities and good selectivity are achieved in the presence of physiologically relevant concentrations of ascorbic and uric acids, contrasting to the related literature employing IR LIG where such interferents are below the physiological range. Despite providing lower sensitivity, UV LIG is still an excellent material for DA biosensors, with the above‐mentioned advantages in terms of miniaturization. To our knowledge, these are among the highest sensitivities reported for voltammetric measurement of DA using carbon‐based materials. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Hypothesis Reversible addition fragmentation chain transfer (RAFT) - assisted encapsulating emulsion polymerization (REEP) has received considerable attention as an efficient strategy to prepare colloidal stable shell@core nanoparticles. Generally, amphipathic macroRAFT agents are used but the effect of working above or below the critical micelle concentration (CMC) of macroRAFT agents needs to be addressed. Hence, it is necessary to understand if this parameter has an impact not only on the stability of the colloids but also on the molecular mass of the polymer shell. Methods Here, the CMC of three different macroRAFT agent was determined and the effect of macroRAFT agents concentration on the colloidal stability of gold nanoparticles coated with macroRAFT agents (macroRAFT@Au) assessed. The subsequent chain extension from macroRAFT@Au NPs, resulting in encapsulated Au nanoparticles (copolymer@Au), has also been systematically studied. Findings Using the REEP approach it was possible to obtain stable encapsulated Au NPs. Moreover, this strategy opens the possibility of adjusting the macroRAFT agents concentration to tune the length of the polymer chains grown around Au cores which is of major interest for the design of biosensors based on responsive polymer shells, such as pH, temperature and photoluminescence quenching. [ABSTRACT FROM AUTHOR]

Colloidal gold nanoparticles (Au NPs) have been used in several biological applications, which include the exploitation of size- and shape-dependent Localized Surface Plasmon Resonance (LSPR) in biosensing devices. In order to obtain functional and stable Au NPs in a physiological medium, surface modification and functionalization are crucial steps in these endeavors. Reversible addition-fragmentation chain transfer (RAFT) polymerization meets this need offering the possibility of control over the composition and architecture of polymeric shells coating Au NPs. Furthermore, playing with a careful choice of monomers, RAFT polymerization allows the possibility to design a polymer shell with the desired functional groups aiming at Au based nanocomposites suitable for biorecognition and biotargeting. This review provides important aspects concerning the synthesis and optical properties of Au NPs as well as concepts of RAFT polymerization. Understanding these concepts is crucial to appreciate the chemical strategies available towards RAFT-polymer coated Au core-shell nanostructures, which are here reviewed. Finally, examples of applications in opto-biodetection devices are provided and the potential of responsive "smart" nanomaterials based on such structures can be applied to other biological applications. [ABSTRACT FROM AUTHOR]

The synthesis of core-shell Au nanoparticles protected by an amphiphilic block copolymer is investigated by distinct reversible addition fragmentation chain transfer (RAFT) emulsion polymerization routes. The controlled polymerization of polymer shells onto Au nanoparticles is attempted by using the macroRAFT (MR) agent based on 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid synthesized via RAFT polymerization of poly(ethylene glycol) methyl ether acrylate and exploring several approaches, which include (i) post-modification; (ii) in situ synthesis and (iii) 'grafting from' strategies. In the conditions investigated here all these strategies lead to Au polymer nanocomposites but morphological well-defined core-shell nanoparticles are only obtained by applying the 'grafting from' strategy. In particular, conditions that promote chain extension from the MR agent adsorbed onto the Au nanoparticles are found necessary to obtain nanostructures with such morphological characteristics and that still show the localized surface plasmon resonance typical of colloidal Au nanoparticles. [ABSTRACT FROM AUTHOR]

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of −0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators. [ABSTRACT FROM AUTHOR]

The use of reversible addition-fragmentation chain transfer (RAFT)-assisted encapsulating emulsion polymerization (REEP) has been explored to prepare diverse types of colloidal stable core–shell nanostructures. A major field of application of such nanoparticles is in emergent nanomedicines, which require effective biofunctionalization strategies, in which their response to bioanalytes needs to be firstly assessed. Herein, functional core–shell nanostructures were prepared via REEP and click chemistry. Thus, following the REEP strategy, colloidal gold nanoparticles (Au NPs, d = 15 nm) were coated with a poly(ethylene glycol) methyl ether acrylate (PEGA) macroRAFT agent containing an azide (N3) group to afford N3–macroRAFT@Au NPs. Then, chain extension was carried out from the NPs surface via REEP, at 44 °C under monomer-starved conditions, to yield N3–copolymer@Au NPs–core–shell type structures. Biotin was anchored to N3–copolymer@Au NPs via click chemistry using an alkynated biotin to yield biofunctionalized Au nanostructures. The response of the ensuing biotin–copolymer@Au NPs to avidin was followed by visible spectroscopy, and the copolymer–biotin–avidin interaction was further studied using the Langmuir–Blodgett technique. This research demonstrates that REEP is a promising strategy to prepare robust functional core–shell plasmonic nanostructures for bioapplications. Although the presence of azide moieties requires the use of low polymerization temperature, the overall strategy allows the preparation of tailor-made plasmonic nanostructures for applications of biosensors based on responsive polymer shells, such as pH, temperature, and photoluminescence quenching. Moreover, the interaction of biotin with avidin proved to be time dependent. [ABSTRACT FROM AUTHOR]

Optical fiber technology has rapidly progressed over the years, providing valuable benefits for biosensing purposes such as sensor miniaturization and the possibility for remote and real-time monitoring. In particular, tilted fiber Bragg gratings (TFBGs) are extremely sensitive to refractive index variations taking place on their surface. The present work comprises a case-study on the impact of different methods of analysis applied to decode spectral variations of bare and plasmonic TFBGs during the detection of N-terminal B-type natriuretic peptide (NT-proBNP), a heart failure biomarker, namely by following the most sensitive mode, peaks of the spectral envelopes, and the envelopes' crossing point and area. Tracking the lower envelope resulted in the lowest limits of detection (LOD) for bare and plasmonic TFBGs, namely, 0.75 ng/mL and 0.19 ng/mL, respectively. This work demonstrates the importance of the analysis method on the outcome results, which is crucial to attain the most reliable and sensitive method with lower LOD sensors. Furthermore, it makes the scientific community aware to take careful attention when comparing the performance of different biosensors in which different analysis methods were used. [ABSTRACT FROM AUTHOR]

• Optical fiber sensor for pH measurement as low-cost solution. • pH sensitive material as polyaniline using synthetic oxidative polymerization on optical fiber surface. • Transition between protonated and deprotonated polyaniline increasing RI of the layer as the pH increases. • FBGs inscribed by UV laser in tapering fiber and D-shaped fiber as optical solution. • Sensors with good reproducibility and repeatability with excelent sensitivities for tapers and D-shape fibers. Optical fiber sensors show potential for monitoring multiple parameters essential to the growth and health of fish, particularly the pH value of the aquaculture medium. Two types of optical fiber sensors, using tapered silica single mode fibers with a Bragg grating inscribed and D-shaped plastic optical fibers (home-made and reused) were produced. A pH-sensitive layer made of polyaniline (PANI) was deposited on the optical fibers' surface. The sensors demonstrated reproducibility and repeatability with a sensitivity of −0.22 ± 0.02 dB/pH, −472 ± 9 Counts/pH, and −(26 ± 2) × 102 Counts/pH for tapers, D-shape home-made, and reused, respectively, but only for increasing pH. Stabilization time tests indicated that a minimum of 60 s is required for a stable response, with no significant cross-sensitivities regarding temperature and ionic strength. [ABSTRACT FROM AUTHOR]

Direct laser scribing (DLS) technology is applied to commercial polyimide (PI) coated optical fibers producing laser-induced graphene (LIG) coated optical fibers. The PI-coated optical fiber is first inscribed with off-center Bragg gratings via point-by-point method using a femtosecond laser system. Then, the off-center Bragg grating is irradiated with a CO 2 laser and the PI coating is photothermally converted into LIG without affecting the grating. Scanning electron microscopy (SEM) and Raman spectroscopy prove the presence of the laser-induced graphene layer on the optical fiber, and Fourier transform infrared (FTIR) spectroscopy confirms that all the PI coating was converted into LIG. The resulting LIG-coated off-center Bragg grating (FBG) sensors respond to variations of the surrounding refractive index (RI) with a sensitivity of 38.08 ± 1.57 nm per RI units (RIU). In addition, after removal of the PI coating, obtaining a bare-FBG, the sensitivity decreases to 25.63 ± 0.66 nm R I U − 1 . Therefore, this strategy, here reported for the first time, paves the way to produce promising novel optical transducers aiming to develop bio- and chem-sensing devices. • Direct laser scribing technology applied to commercial polyimide optical fibers. • Laser-induced graphene produced directly on optical fiber for sensing. • The resulting LIG-coated off-center FBG sensors respond to variations of the surrounding RI. • High sensitivity compared with after removal of the PI coating. [ABSTRACT FROM AUTHOR]