Search

This study investigated the blocking mechanism of immobilized penicillin G acylase (PGA) during the enzymatic synthesis of amoxicillin. Laboratory observations revealed that the primary cause of clogging was the crystallization of the substrate and product on the enzyme surface. Adjusting key parameters can significantly reduce clogging and improve catalytic efficiency. Methanol can decrease enzyme activity, but isopropyl alcohol cleaners can effectively remove clogs and protect enzyme activity. These findings provide an experimental foundation for optimizing the PGA immobilization process, which is crucial for achieving high efficiency and sustainability in industrial production.

Biodegradation is an efficient and cost-effective approach to remove residual penicillin G sodium (PGNa) from the environment. In this study, the effective PGNa-degrading strain SQW1 (Sphingobacterium sp.) was screened from contaminated soil using enrichment technique. The effects of critical operational parameters on PGNa degradation by strain SQW1 were systematically investigated, and these parameters were optimized by response surface methodology to maximize PGNa degradation. Comparative experiments found the extracellular enzyme to completely degrade PGNa within 60 min. Combined with whole genome sequencing of strain SQW1 and LC-MS analysis of degradation products, penicillin acylase and β-lactamase were identified as critical enzymes for PGNa biodegradation. Moreover, three degradation pathways were postulated, including β-lactam hydrolysis, penicillin acylase hydrolysis, decarboxylation, desulfurization, demethylation, oxidative dehydrogenation, hydroxyl reduction, and demethylation reactions. The toxicity of PGNa biodegradation intermediates was assessed using paper diffusion method, ECOSAR, and TEST software, which showed that the biodegradation products had low toxicity. This study is the first to describe PGNa-degrading bacteria and detailed degradation mechanisms, which will provide new insights into the PGNa biodegradation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

With the emergence of penicillin resistance, the development of novel antibiotics has become an urgent necessity. Semi-synthetic penicillin has emerged as a promising alternative to traditional penicillin. The demand for the crucial intermediate, 6-aminopicillanic acid (6-APA), is on the rise. Enzyme catalysis is the primary method employed for its production. However, due to certain limitations, the strategy of enzyme immobilization has also gained prominence. The magnetic Ni0.4Cu0.5Zn0.1Fe2O4 nanoparticles were successfully prepared by a rapid-combustion method. Sodium silicate was used to modify the surface of the Ni0.4Cu0.5Zn0.1Fe2O4 nanoparticles to obtain silica-coated nanoparticles (Ni0.4Cu0.5Zn0.1Fe2O4-SiO2). Subsequently, in order to better crosslink PGA, the nanoparticles were modified again with glutaraldehyde to obtain glutaraldehyde crosslinked Ni0.4Cu0.5Zn0.1Fe2O4-SiO2-GA nanoparticles which could immobilize the PGA. The structure of the PGA protein was analyzed by the PyMol program and the immobilization strategy was determined. The conditions of PGA immobilization were investigated, including immobilization time and PGA concentration. Finally, the enzymological properties of the immobilized and free PGA were compared. The optimum catalytic pH of immobilized and free PGA was 8.0, and the optimum catalytic temperature of immobilized PGA was 50°C, 5°C higher than that of free PGA. Immobilized PGA in a certain pH and temperature range showed better catalytic stability. Vmax and Km of immobilized PGA were 0.3727 μmol·min-1 and 0.0436 mol·L-1, and the corresponding free PGA were 0.7325 μmol·min-1 and 0.0227 mol·L-1. After five cycles, the immobilized enzyme activity was still higher than 25%., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Lv et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Penicillin G acylase (PGA) is a strategic enzyme in the production processes of beta-lactam antibiotics. High demand for β-lactam semisynthetic antibiotics explain the genetic and biochemical engineering strategies devoted towards novel ways for PGA production and application. This work presents a fermentation process for the heterologous production of PGA from Alcaligenes faecalis in Bacillus megaterium with optimization. The thermal stability from A. faecalis PGA is considerably higher than other described PGA and the recombinant enzyme is secreted to the culture medium by B. megaterium, which facilitates the separation and purification steps. Media optimization using fractional factorial design experiments was used to identify factors related to PGA activity detection in supernatant and cell lysates. The optimized medium resulted in almost 6-fold increased activity in the supernatant samples when compared with the basal medium. Maximum enzyme activity in optimized medium composition achieves values between 135 and 140 IU/ml. The results suggest a promising model for recombinant production of PGA in B. megaterium with possible extracellular expression of the active enzyme., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Penicillin G acylase (PGA) is a key biocatalyst for the enzymatic production of β-lactam antibiotics, which can not only catalyze the synthesis of β-lactam antibiotics but also catalyze the hydrolysis of the products to prepare semi-synthetic antibiotic intermediates. However, the high hydrolysis and low synthesis activities of natural PGAs severely hinder their industrial application. In this study, a combinatorial directed evolution strategy was employed to obtain new PGAs with outstanding performances. The best mutant βF24G/βW154G was obtained from the PGA of Achromobacter sp., which exhibited approximately a 129.62-fold and a 52.55-fold increase in specific activity and synthesis/hydrolysis ratio, respectively, compared to the wild-type AsPGA. Thereafter, this mutant was used to synthesize amoxicillin, cefadroxil, and ampicillin; all conversions > 99% were accomplished in 90-135 min with almost no secondary hydrolysis byproducts produced in the reaction. Molecular dynamics simulation and substrate pocket calculation revealed that substitution of the smallest glycine residue at βF24 and βW154 expanded the binding pocket, thereby facilitating the entry and release of substrates and products. Therefore, this novel mutant is a promising catalyst for the large-scale production of β-lactam antibiotics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Penicillin G acylase (PGA), as a key enzyme, is increasingly used in the commercial production of semi-synthetic β-lactam antibiotics (SSBAs). With the substitution of conventional chemical synthesis by emerging bioconversion processes, more and more PGAs fermented from different types of strains such as Escherichia coli (E. coli, ATCC 11105), Achromobacter sp. CCM 4824 and Providencia rettgeri (ATCC 31052) have been used in this kind of enzymatic processes. As an intermediate reaction catalyst, PGA protein and its presence in the final products may cause a potential risk of human allergic reaction and bring challenges for both quality and process controls. To achieve qualitative and quantitative analysis of PGAs and their residues in SSBAs, a tryptic digestion coupled with liquid chromatography - tandem mass spectrometry (LC-MS/MS) method was developed and proposed because of advantages like high selectivity and sensitivity. A suitable filter aided sample preparation (FASP) method was also used to remove matrix interference and to enrich the target PGA retained in the ultrafiltration membrane for an efficient enzymatic hydrolysis and subsequent accurate MS detection. Finally, twelve batches of PGAs from eight companies were identified and categorized into two types of strains (E. coli and Achromobacter sp. CCM 4824) using proteomic analysis. In total nine batches of five types of SSBAs (amoxicillin, cephalexin, cefprozil, cefdinir and cefaclor) from eight manufacturers were selected for investigation. Trace levels of PGA residual proteins ranging from 0.01 to 0.44 ppm were detected in six batches of different SSBAs which were far lower than the safety limit of 35 ppm reported by DSM, a manufacturer with expertise in the production of SSBAs by enzymatic processes. The developed FASP with LC-MS/MS method is superior to traditional protein assays in terms of selectivity, sensitivity and accuracy. Moreover, it could provide in-depth analysis of amino acid sequences and signature peptides contributing to assignment of the strain sources of PGAs. This method could become a promising and powerful tool to monitor enzymatic process robustness and reliability of this kind of SSBAs manufacturing., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

This article reports the synthesis and characterization of a novel self-immolative linker, based on thiocarbonates, which releases a free thiol upon activation via enzymes. We demonstrate that thiocarbonate self-immolative linkers can be used to detect the enzymes penicillin G amidase (PGA) and nitroreductase (NTR) with high sensitivity using absorption spectroscopy. Paired with modern thiol amplification technology, the detection of PGA and NTR were achieved at concentrations of 160 nM and 52 nM respectively. In addition, the PGA probe was shown to be compatible with both biological thiols and enzymes present in cell lysates.

The thiol group of the cysteine side chain is arguably the most versatile chemical handle in proteins. To expand the scope of established and commercially available thiol bioconjugation reagents, we genetically encoded a second such functional moiety in form of a latent thiol group that can be unmasked under mild physiological conditions. Phenylacetamidomethyl (Phacm) protected homocysteine (HcP) was incorporated and its latent thiol group unmasked on purified proteins using penicillin G acylase (PGA). The enzymatic deprotection depends on steric accessibility, but can occur efficiently within minutes on exposed positions in flexible sequences. The freshly liberated thiol group does not require treatment with reducing agents. We demonstrate the potential of this approach for protein modification with conceptually new schemes for regioselective dual labeling, thiol bioconjugation in presence of a preserved disulfide bond and formation of a novel intramolecular thioether crosslink., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Objective: To change the specificity of a glutaryl-7-aminocephalosporanic acid acylase (GCA) towards N-acyl homoserine lactones (AHLs; quorum sensing signalling molecules) by site-directed mutagenesis., Results: Seven residues were identified by analysis of existing crystal structures as potential determinants of substrate specificity. Site-saturation mutagenesis libraries were created for each of the seven selected positions. High-throughput activity screening of each library identified two variants-Arg255Ala, Arg255Gly-with new activities towards N-acyl homoserine lactone substrates. Structural modelling of the Arg255Gly mutation suggests that the smaller side-chain of glycine (as compared to arginine in the wild-type enzyme) avoids a key clash with the acyl group of the N-acyl homoserine lactone substrate., Conclusions: Mutation of a single amino acid residue successfully converted a GCA (with no detectable activity against AHLs) into an AHL acylase. This approach may be useful for further engineering of 'quorum quenching' enzymes.

Penicillin G acylase (PGA) was an important biocatalyst for enzymatic production of second-generation cephalosporin. PGA from Achromobacter xylosoxidans PX02 (AxPGA) showed relatively lower identity to EcPGA (54.9% in α subunit and 51.7% in β subunit), which could synthesize cefamandole in the kinetically controlled N-acylation (kcNa). Semi-rational design of AxPGA and "small and smart" mutant libraries were developed with minimal screening to improve cefamandole production. A triple mutant αR141A/αF142I/βF24G by combining the mutational sites (βF24, αR141, and αF142) from different subunits of AxPGA showed better performance in cefamandole production, with 4.2-fold of improvement in the (k cat /K m ) AD value for activated acyl donor (R)-Methyl mandelate. Meanwhile, the (k cat /K m ) Ps value for cefamandole by mutant αR141A/αF142I/βF24G was sharply dropped by 25.5 times, indicating its highly synthetic activity and extremely low hydrolysis of cefamandole. Strikingly, the triple mutant αR141A/αF142I/βF24G could form cefamandole with a yield of 85% at an economical substrate ratio (acyl donor/nucleophile) of 1.3:1 (82% at 1.1:1), which advanced the greener and more sustainable process of cefamandole production than the wild type. Furtherly, the improved synthetic ability and lower hydrolysis of cefamandole by mutant were rationalized using molecular docking., (Copyright © 2021. Published by Elsevier B.V.)

During enzyme immobilization, enzyme activity and protein distribution are affected by various factors such as enzyme load, temperature, and pH. In general, two types of protein distribution patterns (heterogeneous or homogeneous) are observed inside a porous carrier, owing to differences in preparation parameters. During the immobilization of a fusion protein (CCApH) of cephalosporin C acylase (CCA) and pHluorin (a pH-sensitive mutant of green fluorescent protein), different shaking speeds induced obvious differences in protein distribution on an epoxy carrier, LX-1000EPC. Enzyme immobilization with a homogeneous distribution pattern was observed at a low shaking speed (120 rpm) with an operational stability of 10 batches at 37°C. The operational stability of an immobilisate with heterogeneous protein distribution prepared at a high shaking speed (200 rpm) was six batches. Given the pH-sensitive characteristics of pHluorin in the fusion protein, the intraparticle pH of CCApH immobilisates during catalysis was monitored using confocal laser scanning microscopy. The microenvironmental pH of the immobilisate with heterogeneous protein distribution sharply decreased by about 2 units; this decrease in the pH may be detrimental to the life-span of immobilized CCA. Thus, this work demonstrates the good operational stability of pH-sensitive proton-forming immobilized enzymes with homogeneous protein distribution., (© 2020 American Institute of Chemical Engineers.)

Penicillin acylases (penicillin amidohydrolase, EC 3.5.1.11) are a group of enzymes with many applications within the pharmaceutical industry, and one of them is the production of semi-synthetic beta-lactam antibiotics. This enzyme is mainly produced by bacteria but also by some fungi. In the present study, the filamentous fungus Mucor griseocyanus was used to produce penicillin acylase enzyme (PGA). Its ability to express PGA enzyme in submerged fermentation process was assessed, finding that this fungal strain produces the biocatalyst of interest in an extracellular way at a level of 570 IU/L at 72 h of fermentation; in this case, a saline media using lactose as carbon source and penicillin G as inducer was employed. In addition, a DNA fragment (859 bp) of the pga from a pure Mucor griseocyanus strain was amplified, sequenced, and analyzed in silico. The partial sequence of pga identified in the fungi showed high identity percentage with penicillin G acylase sequences deposited in NCBI through BLAST, especially with the β subunit of PGA from the Alcaligenes faecalis bacterium¸ which is a region involved in the catalytic function of this protein. Besides, the identification of domains in the penicillin G acylase sequence of Mucor griseocyanus showed three conserved regions of this protein. The bioinformatic results support the identity of the gen as penicillin G acylase. This is the first report that involves sequencing and in silico analysis of Mucor griseocyanus strain gene encoding PGA.

Penicillin G acylase (PGA) has been immobilized on a lanthanum-incorporated mesostructured cellular foam (La-MCF) support by using the interaction between the strong Lewis acid sites on the surface of La-MCF and the free amino groups of lysine residues of PGA. The La-MCF support was successfully synthesized in situ through the addition of a citric acid (CA) complexant. The results of pyridine-IR spectroscopy show the presence of strong Lewis acid sites on the surface of the prepared La-MCF (with CA), attributed to the incorporation of lanthanum species into the framework of MCF. Through interaction with the strong Lewis acid sites, the enzymes can be firmly immobilized on the surface of the support. The results indicate that PGA/La-MCF (with CA) exhibits a high specific activity and greatly enhanced operational stability. For the hydrolysis of penicillin G potassium salt, the initial specific activity of PGA/La-MCF (with CA) reaches 10023 U/g. Even after being recycled 10 times, PGA/La-MCF (with CA) retains 89 % of its initial specific activity, much higher than the 77 % of PGA/Si-MCF., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To take full advantage of recombinant Pichia pastoris (Komagataella phaffii) as a production system for heterologous proteins, the complex protein secretory process should be understood and optimised by circumventing bottlenecks. Typically, little or no attention has been paid to the fate of newly synthesised protein inside the cell, or its passage through the secretory pathway, and only the secreted product is measured. However, the system's productivity (i.e. specific production rate q p ), includes productivity of secreted (q p,extra ) plus intracellularly accumulated (q p,intra ) protein. In bioreactor cultivations with P. pastoris producing penicillin G acylase, we studied the dynamics of product formation, i.e. both the specific product secretion (q p,extra ) and product retention (q p,intra ) as functions of time, as well as the kinetics, i.e. productivity in relation to specific growth rate (μ). Within the time course, we distinguished (I) an initial phase with constant productivities, where the majority of product accumulated inside the cells, and q p,extra , which depended on μ in a bell-shaped manner; (II) a transition phase, in which intracellular product accumulation reached a maximum and productivities (intracellular, extracellular, overall) were changing; (III) a new phase with constant productivities, where secretion prevailed over intracellular accumulation, q p,extra was linearly related to μ and was up to three times higher than in initial phase (I), while q p,intra decreased 4-6-fold. We show that stress caused by heterologous protein production induces cellular imbalance leading to a secretory bottleneck that ultimately reaches equilibrium. This understanding may help to develop cultivation strategies for improving protein secretion from P. pastoris.Key Points• A novel concept for industrial bioprocess development.• A Relationship between biomass growth and product formation in P. pastoris.• A Three (3) phases of protein production/secretion controlled by the AOX1-promoter.• A Proof of concept in production of industrially relevant penicillin G acylase.

There is a growing trend in the pharmaceutical industry towards substituting conventional chemical synthesis routes of semi-synthetic β-lactam antibiotics (SSBAs) through environmentally sustainable enzymatic processes. These have advantages such as cost reduction in terms of solvent and waste treatment and time saving owing to fewer reaction steps. Penicillin G acylase (PGA) is an industrially important enzyme that is mainly used to catalyze the synthesis of SSBAs. In this study, we established an integrative strategy using three different analytical methods for determining the PGA-associated residual protein content, which is a critical quality issue in the end product. Cefaclor was taken as representative example of SSBAs. High-performance liquid chromatography coupled with fluorescence detection (HPLC-FD) allowed the routine analysis of PGA residual proteins and other low molecular weight (MW) impurities with high detection specificity and sensitivity, comparable to those of the Bradford assay and microfluidic protein chip electrophoresis. However, these latter two methods were superior for quantitative and qualitative analysis, respectively, and should be regarded as necessary adjuncts to the HPLC-FD method. By combining the three methods, trace levels of residual proteins were detected in four (out of 13) cefaclor bulk samples from two different manufacturers, with a major protein MW of ∼63 kDa. This suggests that the higher MW PGA subunit tends to persist in the end product. The integrative determination strategy described here can be used to evaluate SSBA bulk samples and monitor the process of SSBA manufacturing by enzymatic methods, especially in terms of inter-batch consistency and process stability., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A penicillin G acylase (PGA) from Achromobacter xylosoxidans PX02 was newly isolated, and site-directed mutagenesis at three important positions αR141, αF142, βF24 was carried out for improving the enzymatic synthesis of β-lactam antibiotics. The efficient mutant βF24A was selected, and the (P s /P h ) ini (ratio between the initial rate of synthesis and hydrolysis of the activated acyl donor) dramatically increased from 1.42-1.50 to 23.8-24.1 by means of the optimization of reaction conditions. Interestingly, the efficient enzymatic synthesis of ampicillin (99.1% conversion) and amoxicillin (98.7% conversion) from a high concentration (600 mM) of substrate 6-APA in the low acyl donor/nucleus ratio (1.1:1) resulted in a large amount of products precipitation from aqueous reaction solution. Meanwhile, the by-product D-phenylglycine was hardly precipitated, and 93.5% yield of precipitated ampicillin (561 mM) and 94.6% yield of precipitated amoxicillin (568 mM) were achieved with high purity (99%), which significantly simplified the downstream purification. This was the first study to achieve efficient β-lactam antibiotics synthesis process with in situ product removal, with barely any by-product formation. The effect enzymatic synthesis of antibiotics in aqueous reaction solution with in situ product removal provides a promising model for the industrial semi-synthesis of β-lactam antibiotics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Background: β-lactam antibiotics are the most used worldwide for the treatment of bacterial infections. The consumption of these classes of drugs is high, and it is increasing around the world. To date, the best way to produce them is using penicillin G Acylase (PGA) as a biocatalyst., Objective: This manuscript offers an overview of the most recent advances in the current tools to improve the activity of the PGA and its pharmaceutical application., Results: Several microorganisms produce PGA, but some bacterial strains represent the primary source of this enzyme. The activity of bacterial PGA depends on its adequate expression and carbon or nitrogen source, as well as a specific pH or temperature depending on the nature of the PGA. Additionally, the PGA activity can be enhanced by immobilizing it to a solid support to recycle it for a prolonged time. Likewise, PGAs more stable and with higher activity are obtained from bacterial hosts genetically modified., Conclusion: PGA is used to produce b-lactam antibiotics. However, this enzyme has pharmaceutical potential to be used to obtain critical molecules for the synthesis of anti-tumor, antiplatelet, antiemetic, antidepressive, anti-retroviral, antioxidant, and antimutagenic drugs., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

In this work, TiO 2 , which was modified by glutaraldehyde, was adopted as the carrier; the penicillin G acylase (PGA) was immobilized and the influence of immobilized conditions, such as pH of solution, the concentration of PGA, the immobilization temperature, and the reaction time, on the catalytic performance of the immobilized PGA was investigated and optimized. During this process, potassium penicillin G (PG) was chosen as substrate, and the quantity of 6-aminopenicillanic acid (6-APA) produced by PG at the temperature of 25 °C for 3 Min in neutral solution was conscripted as the evaluation foundation, indexes, containing the loading capacity (ELC), the activity (EA), and activity retention rate (EAR), were calculated based on quantities of produced 6-APA and compared with finding out the suitable conditions. Results showed that when the solution pH, PGA concentration, immobilization temperature, and reaction time were 8.0, 2.5% (v/v), 35 °C, and 24 H, respectively, ELC, EA, and EAR presented optimal values of 9,190 U, 14,969 U/g, and 88.5% relatedly. After that, the stability and reusability of immobilized PGA were studied, and the results documented that the pH resistance, thermal stability, and storage stability of immobilized PGA were significantly improved. This work provided technique support for the practical application of immobilized PGA carrier., (© 2019 International Union of Biochemistry and Molecular Biology, Inc.)

In a stirred tank reactor, during catalysis with immobilized cephalosporin C acylase (CCA), the microenvironmental pH dropped to 7.2 in a nonbuffered system (with the pH maintained at 8.5 by adding alkali) due to the existence of diffusional resistance. Moreover, the immobilized CCA only catalyzed five batch reactions, suggesting that the sharp pH gradient impaired the enzyme stability. To buffer the protons produced in the hydrolysis of cephalosporin C by CCA, phosphate and bicarbonate buffers were introduced. When CCA was catalyzed with 0.1 M ammonium bicarbonate buffer, no obvious gradient between the bulk solution and intraparticle pH was detected, and the catalysis of 15 batch reactions was achieved. Accordingly, with 0.2 M ammonium bicarbonate buffer in a packed bed reactor, the immobilized CCA exhibited continuous catalysis with high conversion rates (≥95%) for 21 days. Reactions with ammonium bicarbonate buffer showed significant increases in the stability and catalytic efficiency of the immobilized CCA in different reactors compared to those in nonbuffered systems., (© 2019 American Institute of Chemical Engineers.)

Semisynthetic cephalosporins are widely used antibiotics currently produced by different chemical steps under harsh conditions, which results in a considerable amount of toxic waste. Biocatalytic synthesis by the cephalosporin acylase from Pseudomonas sp. strain N176 is a promising alternative. Despite intensive engineering of the enzyme, the catalytic activity is still too low for a commercially viable process. To identify the bottlenecks which limit the success of protein engineering efforts, a series of MD simulations was performed to study for two acylase variants (WT, M6) the access of the substrate cephalosporin C from the bulk to the active site and the stability of the enzyme-substrate complex. In both variants, cephalosporin C was binding to a non-productive substrate binding site (E86α, S369β, S460β) at the entrance to the binding pocket, preventing substrate access. A second non-productive binding site (G372β, W376β, L457β) was identified within the binding pocket, which competes with the active site for substrate binding. Noteworthy, substrate binding to the protein surface followed a Langmuir model resulting in binding constants K = 7.4 and 9.2 mM for WT and M6, respectively, which were similar to the experimentally determined Michaelis constants K M  = 11.0 and 8.1 mM, respectively.

The immobilized penicillin G acylase (PGA) is an important industrial catalyst, the activity recovery rate of it directly affects enterprise efficiency. How to improve the enzyme activity recovery rate has been a research focus in this field. Based on the above problems, this work further improved the activity recovery rate by adjusting the target spacing for the first time. Glycidyl methacrylate (GMA) was used as the immobilized target and methyl methacrylate (MMA) as the copolymer monomer. According to the copolymer composition equation of P(MMA-co-GMA), the thermo-sensitive copolymers, PDEA-b-PHEMA-b-P(MMA-co-GMA) with different target spacings, were synthesized rapidly and efficiently via reversible addition-fragmentation chain transfer (RAFT) polymerization method. The error range between the theoretical and actual values of MMA and GMA in the copolymers carrier was (0-4)%, which demonstrated that the reliability of using composition equation to accurately and quickly synthesize copolymers with specific spacing. Studies on the thermo-sensitive showed that the low critical solution temperature (LCST) of the copolymer carrier decreased with the increase of hydrophobic monomer. Most importantly, the activity recovery rate increased with the increase of target spacing, and when the molar ratio of MMA to GMA in the copolymer was 8.75:1, the recovery of activity of immobilized PGA could be up to 63.50%, which was 21.70% higher than that of pure GMA. This work provided an important idea for improving the activity of immobilized PGA., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Magnetic Ni 0.7 Co 0.3 Fe 2 O 4 nanoparticles that were prepared via the rapid combustion process were functionalized and modified to obtain magnetic Ni 0.7 Co 0.3 Fe 2 O 4 @SiO 2 -CHO nanocomposites, on which penicillin G acylase (PGA) was covalently immobilized. Selections of immobilization concentration and time of fixation were explored. Catalytic performance of immobilized PGA was characterized. The free PGA had greatest activity at pH 8.0 and 45oC while immobilized PGA's a ctivities peaked a t pH 7.5 and 45°C. Immobilized PGA had better thermal stability than free PGA at the range of 30-50°C for different time intervals. The activity of free PGA would be 0 and that of immobilized PGA still retained some activities at 60°C after 2 h. V max and K m of immobilized PGA were 1.55 mol/min and 0.15 mol/l, respectively. Free PGA's V max and K m separately were 0.74 mol/min and 0.028 mol/l. Immobilized PGA displayed more than 50% activity after 10 successive cycles. We concluded that immobilized PGA with magnetic Ni 0.7 Co 0.3 Fe 2 O 4 @SiO 2 -CHO nanocomposites could become a novel example for the immobilization of other amidohydrolases.

Penicillin acylase is commonly used to produce the medical intermediates of 6-Aminopenicillanic acid (6-APA) and 7-Aminodesacetoxycephalosporanic acid (7-ADCA) in industrial process. Nowadays, Penicillin G acylase (PGA) has been widely applied for making pharmaceutical intermediates, while penicillin V acylase (PVA) has been less used for that due to its low activity and poor conversion. In this study, a PVA from Bacillus sphaericus (BspPVA) was employed for directed evolution study with hoping to increase its catalytic efficiency. Finally, a triple mutant BspPVA-3 (T63S/N198Y/S110C) was obtained with 12.4-fold specific activity and 11.3-fold catalytic efficiency higher than BspPVA-wt (wild type of BspPVA). Moreover, the conversion yields of 6-APA catalyzed by BspPVA-3 reached 98% with 20% (w/v) penicillin V as substrate, which was significantly higher than that of the BspPVA-wt (85%). Based on the analysis of modeling, the enhancement of specific activity of mutant BspPVA-3 was probably attributed to the changes in the number of hydrogen bonds within the molecules. The triple mutant PVA developed in this study has a potential for large-scale industrial application for 6-APA production., (Copyright © 2018 Elsevier Inc. All rights reserved.)

An efficient chemoenzymatic route was developed for synthesis of (S)-α-amino-4-fluorobenzeneacetic acid, a valuable chiral intermediate of Aprepitant, using immobilized penicillin amidase catalyzed kinetic resolution of racemic N-phenylacetyl-4-fluorophenylglycine. The optimum temperature, pH and agitation rate of the reaction were determined to be 40 °C, 9.5 and 300 rpm, respectively. Kinetic resolution of 80 g L -1 N-phenylacetyl-4-fluorophenylglycine by immobilized amidase 20 g L -1 resulted in 49.9% conversion and >99.9% e.e. within 3 h. The unreacted N-phenylacetyl-4-fluorophenylglycine can be easily racemized and then recycled as substrate. The production of (S)-α-amino-4-fluorobenzeneacetic acid was further amplified in 1 L reaction system, affording excellent conversion (49.9%) and enantioselectivity (99.9%). This chemoenzymatic approach was demonstrated to be promising for industrial production of (S)-α-amino-4-fluorobenzeneacetic acid., (Copyright © 2018. Published by Elsevier Inc.)

Penicillin G acylase (PGA) was isolated from Providencia rettgeri PX04 (PrPGApx04) and utilized for the kinetically controlled synthesis of β-lactam antibiotics. Site-directed mutagenesis was performed to increase the process efficiency. Molecular docking was carried out to speculate the key mutant positions corresponding with synthetic activity, which resulted in the achievement of an efficient mutant, βF24G. It yielded higher conversions than the wild-type enzyme in the synthesis of amoxicillin (95 versus 17.2%) and cefadroxil (95.4 versus 43.2%). The reaction time for achieving the maximum conversion decreased from 14 to 16 h to 2-2.5 h. Furthermore, the secondary hydrolysis of produced antibiotics was hardly observed. Kinetic analysis showed that the (k cat /K m ) AD value for the activated acyl donor D-hydroxyphenylglycine methyl ester (D-HPGME) increased up to 41 times. In contrast, the (k cat /K m ) Ps values for the products amoxicillin and cefadroxil decreased 6.5 and 21 times, respectively. Consequently, the α value (k cat /K m ) Ps /(k cat /K m ) AD , which reflected the relative hydrolytic specificity of PGA for produced antibiotics with respect to the activated acyl donor, were only 0.028 and 0.043, respectively. The extremely low hydrolytic activity for the products of the βF24G mutant enabled greater product accumulation to occur during synthesis, which made it a promising enzyme for industrial applications.

This study deals with the potential of Pichia pastoris X-33 for the production of penicillin G acylase (PGA A ) from Achromobacter sp. CCM 4824. Synthetic gene matching the codon usage of P. pastoris was designed for intracellular and secretion-based production strategies and cloned into vectors pPICZ and pPICZα under the control of AOX1 promoter. The simple method was developed to screen Pichia transformants with the intracellularly produced enzyme. The positive correlation between acylase production and pga gene dosage for both expression systems was demonstrated in small scale experiments. In fed-batch bioreactor cultures of X-33/PENS2, an extracellular expression system, total PGA A expressed from five copies reached 14,880 U/L of an active enzyme after 142 h; however, 60% of this amount retained in the cytosol. The maximum PGA A production of 31,000 U/L was achieved intracellularly from nine integrated gene copies of X-33/PINS2 after 90 h under methanol induction. The results indicate that in both expression systems the production level of PGA A is similar but there is a limitation in secretion efficiency.

In this study, we investigated the enzymatic synthesis of a semi-synthetic cephalosporin, cefadroclor, from 7-aminodesacetoxymethyl-3-chlorocephalosporanic acid (7-ACCA) and p-OH-phenylglycine methyl ester (D-HPGM) using immobilized penicillin G acylase (IPA) in organic co-solvents. Ethylene glycol (EG) was employed as a component of the reaction mixture to improve the yield of cefadroclor. EG was found to increase the yield of cefadroclor by 15-45%. An investigation of altered reaction parameters including type and concentration of organic solvents, pH of reaction media, reaction temperature, molar ratio of substrates, enzyme loading, and IPA recycling was carried out in the buffer mixture. The best result was a 76.5% conversion of 7-ACCA, which was obtained from the reaction containing 20% EG (v/v), D-HPGM to 7-ACCA molar ratio of 4:1 and pH 6.2, catalyzed by 16 IU mL -1 IPA at 20 °C for 10 h. Under the optimum conditions, no significant loss of IPA activity was found after seven repeated reaction cycles. In addition, cefadroclor exhibited strong inhibitory activity against yeast, Bacillus subtilis NX-2, and Escherichia coli and weaker activity against Staphylococcus aureus and Pseudomonas aeruginosa. Cefadroclor is a potential antibiotic with activity against common pathogenic microorganisms.

Virulence pathways in gram-negative pathogenic bacteria are regulated by quorum sensing mechanisms, through the production and sensing of N-acylhomoserine lactone (AHL) signal molecules. Enzymatic degradation of AHLs leading to attenuation of virulence (quorum quenching) could pave the way for the development of new antibacterials. Penicillin V acylases (PVAs) belong to the Ntn hydrolase superfamily, together with AHL acylases. PVAs are exploited widely in the pharmaceutical industry, but their role in the natural physiology of their native microbes is not clearly understood. This report details the characterization of AHL degradation activity by homotetrameric PVAs from two gram-negative plant pathogenic bacteria, Pectobacterium atrosepticum (PaPVA) and Agrobacterium tumefaciens (AtPVA). Both the PVAs exhibited substrate specificity for degrading long-chain AHLs. Exogenous addition of these enzymes into Pseudomonas aeruginosa greatly diminished the production of elastase and pyocyanin and biofilm formation and increased the survival rate in an insect model of acute infection. Subtle structural differences in the PVA active site that regulate specificity for acyl chain length have been characterized, which could reflect the evolution of AHL-degrading acylases in relation to the environment of the bacteria that produce them and also provide strategies for enzyme engineering. The potential for using these enzymes as therapeutic agents in clinical applications and a few ideas about their possible significance in microbial physiology have also been discussed.

A facile sol combustion and gel calcination process has been reported for the preparation of core– shell magnetic Zn0.5Fe₂O₄@SiOnanocomposites. The morphology, chemical composition, structure and magnetic property of as-prepared nanocomposites were investigated by XRD, VSM, BET, SEM, and TEM, and the magnetic Ni0.5Zn0.5Fe₂O₄@SiO₂ nanocomposites were characterized with average size of about 25 nm, saturation magnetization of 90.8 Am²/kg and the specific surface area of 67.1 m2/g. The surface of Ni0.5Zn0.5Fe₂O₄@SiO₂ nanocomposites was functionalized with glutaraldehyde to form the aldehyde-functionalized magnetic Ni0.5Zn0.5Fe₂O4@SiO₂ nanocomposites, and penicillin G acylase (PGA) was successfully immobilized onto them. And the immobilized PGA exhibited high effective activity, good stability of enzyme catalyst and good reusability, and could retain 63.5% of initial activity after 12 consecutive operations. The kinetic parameters were determined, and the value of K m for the immobilized PGA (161.7 mmol/L) is higher than that of the free PGA (3.5 mmol/L), while v max (1.626 mmol/min) is also larger than that of the free PGA (0.838 mmol/min), which revealed that the immobilization of PGA onto Ni0.5Zn0.5Fe₂O₄@SiO₂ nanocomposites was an efficient and simple way for preparation of stable PGA.

Background: Different strains of the genus Bacillus are versatile candidates for the industrial production and secretion of heterologous proteins. They can be cultivated quite easily, show high growth rates and are usually non-pathogenic and free of endo- and exotoxins. They have the ability to secrete proteins with high efficiency into the growth medium, which allows cost-effective downstream purification processing. Some of the most interesting and challenging heterologous proteins are recombinant antibodies and antibody fragments. They are important and suitable tools in medical research for analytics, diagnostics and therapy. The smallest conventional antibody fragment with high-affinity binding to an antigen is the single-chain fragment variable (scFv). Here, different strains of the genus Bacillus were investigated using diverse cultivation systems for their suitability to produce and secret a recombinant scFv., Results: Extracellular production of lysozyme-specific scFv D1.3 was realized by constructing a plasmid with a xylose-inducible promoter optimized for Bacillus megaterium and the D1.3scFv gene fused to the coding sequence of the LipA signal peptide from B. megaterium. Functional scFv was successfully secreted with B. megaterium MS941, Bacillus licheniformis MW3 and the three Bacillus subtilis strains 168, DB431 and WB800N differing in the number of produced proteases. Starting with shake flasks (150 mL), the bioprocess was scaled down to microtiter plates (1250 µL) as well as scaled up to laboratory-scale bioreactors (2 L). The highest extracellular concentration of D1.3 scFv (130 mg L -1 ) and highest space-time-yield (8 mg L -1  h -1 ) were accomplished with B. subtilis WB800N, a strain deficient in eight proteases. These results were reproduced by the production and secretion of a recombinant penicillin G acylase (Pac)., Conclusions: The genus Bacillus provides high potential microbial host systems for the secretion of challenging heterologous proteins like antibody fragments and large proteins at high titers. In this study, the highest extracellular concentration and space-time-yield of a recombinant antibody fragment for a Gram-positive bacterium so far was achieved. The successful interspecies use of the here-designed plasmid originally optimized for B. megaterium was demonstrated by two examples, an antibody fragment and a penicillin G acylase in up to five different Bacillus strains.

The production of 6-aminopenicillanic acid (6-APA) is a key step in the manufacture of semisynthetic antibiotics in the pharmaceutical industry. The penicillin G acylase from Escherichia coli has long been utilized for this purpose. However, the use of penicillin V acylases (PVA) presents some advantages including better stability and higher conversion rates. The industrial application of PVAs has so far been limited due to the nonavailability of suitable bacterial strains and cost issues. In this study, whole-cell immobilization of a recombinant PVA enzyme from Pectobacterium atrosepticum expressed in E. coli was performed. Membrane permeabilization with detergent was used to enhance the cell-bound PVA activity, and the cells were encapsulated in calcium alginate beads and cross-linked with glutaraldehyde. Optimization of parameters for the biotransformation by immobilized cells showed that full conversion of pen V to 6-APA could be achieved within 1 hr at pH 5.0 and 35°C, till 4% (w/v) concentration of the substrate. The beads could be stored for 28 days at 4°C with minimal loss in activity and were reusable up to 10 cycles with 1-hr hardening in CaCl 2 between each cycle. The high enzyme productivity of the PVA enzyme system makes a promising case for its application for 6-APA production in the industry.

In this report, redesigning cephalosporin C acylase from the Pseudomonas strain N176 revealed that the loss of stability owing to the introduced mutations at the active site can be recovered by repacking the nearby hydrophobic core regions. Starting from a quadruple mutant M31βF/H57βS/V68βA/H70βS, whose decrease in stability is largely owing to the mutation V68βA at the active site, we employed a computational enzyme design strategy that integrated design both at hydrophobic core regions for stability enhancement and at the active site for activity improvement. Single-point mutations L154βF, Y167βF, L180βF and their combinations L154βF/L180βF and L154βF/Y167βF/L180βF were found to display improved stability and activity. The two-point mutant L154βF/L180βF increased the protein melting temperature (T m ) by 11.7 °C and the catalytic efficiency V max /K m by 57 % compared with the values of the starting quadruple mutant. The catalytic efficiency of the resulting sixfold mutant M31βF/H57βS/V68βA/H70βS/L154βF/L180βF is recovered to become comparable to that of the triple mutant M31βF/H57βS/H70βS, but with a higher T m . Further experiments showed that single-point mutations L154βF, L180βF, and their combination contribute no stability enhancement to the triple mutant M31βF/H57βS/H70βS. These results verify that the lost stability because of mutation V68βA at the active site was recovered by introducing mutations L154βF and L180βF at hydrophobic core regions. Importantly, mutation V68βA in the six-residue mutant provides more space to accommodate the bulky side chain of cephalosporin C, which could help in designing cephalosporin C acylase mutants with higher activities and the practical one-step enzymatic route to prepare 7-aminocephalosporanic acid at industrial-scale levels.

In this study, protein-based inverse opals were prepared for the first time by using the colloidal crystal templating method. The preparation process involved three steps including filling the templates with protein molecules, crosslinking, and template removal. The obtained inverse opals were used to immobilize Penicillin G acylase (PGA) because of its intrinsic biocompatible property. The immobilization process was optimized and the properties of the immobilized PGA (PGA@IO) were investigated. PGA@IO exhibited improved thermal and pH stability compared with its free counterpart. After reusing nine times, it retained 70% of the initial activity. Besides, the PGA@IO retained high activity during the hydrolysis reactions in continuous catalysis in packed-bed reactor (PBR) after 15 days., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Extensive cross-linking of a precipitate of a protein by a cross-linking reagent (glutaraldehyde has been most commonly used) creates an insoluble enzyme preparation called cross-linked enzyme aggregates (CLEAs). CLEAs show high stability and performance in conventional aqueous as well as nonaqueous media. These are also stable at fairly high temperatures. CLEAs with more than one kind of enzyme activity can be prepared, and such CLEAs are called combi-CLEAs or multipurpose CLEAs. Extent of cross-linking often influences their morphology, stability, activity, and enantioselectivity.

Members of the bacterial genus Acinetobacter have attracted great attention over the past few decades, on account of their various biotechnological applications and clinical implications. In this study, we are reporting the first experimental penicillin V acylase (PVA) activity from this genus. Penicillin acylases are pharmaceutically important enzymes widely used in the synthesis of semisynthetic beta-lactam antibiotics. The bacterium, identified as Acinetobacter sp. AP24, was isolated from the water of Loktak Lake (Manipur, India), an Indo-Burma biodiversity hotspot. PVA production was increased threefold in an optimized medium with 0.2% sodium glutamate and 1% glucose as nitrogen and carbon sources respectively, after 24 hr of fermentation at 28°C and pH 7.0 with shaking at 180 rpm. The enzyme was purified to homogeneity by cation-exchange chromatography using SP-sepharose resin. The PVA is a homotetramer with subunit molecular mass of 34 kD. The enzyme was highly specific toward penicillin V with optimal hydrolytic activity at 40°C and pH 7.5. The enzyme was stable from pH 5.0 to 9.0 at 25 °C for 2 hr. The enzyme retained 75% activity after 1 hr of incubation at 40°C at pH 7.5.

Penicillin G acylase (PGA) was immobilized on magnetic Fe3O4@chitosan nanoparticles through the Schiff base reaction. The immobilization conditions were optimized as follows: enzyme/support 8.8 mg/g, pH 6.0, time 40 min, and temperature 25°C. Under these conditions, a high immobilization efficiency of 75% and a protein loading of 6.2 mg/g-support were obtained. Broader working pH and higher thermostability were achieved by the immobilization. In addition, the immobilized PGA retained 75% initial activity after ten cycles. Kinetic parameters Vmax and Km of the free and immobilized PGAs were determined as 0.91 mmol/min and 0.53 mmol/min, and 0.68 mM and 1.19 mM, respectively. Synthesis of amoxicillin with the immobilized PGA was carried out in 40% ethylene glycol at 25°C and a conversion of 72% was obtained. These results showed that the immobilization of PGA onto magnetic chitosan nanoparticles is an efficient and simple way for preparation of stable PGA.

Enzymatic penicillin hydrolysis by penicillin amidase (also penicillin acylase, PA) represents a Landmark: the first industrially and economically highly important process using an immobilized biocatalyst. Resistance of infective bacteria to antibiotics had become a major topic of research and industrial activities. Solutions to this problem, the antibiotics resistance of infective microorganisms, required the search for new antibiotics, but also the development of derivatives, notably penicillin derivatives, that overcame resistance. An obvious route was to hydrolyse penicillin to 6-aminopenicillanic acid (6-APA), as a first step, for the introduction via chemical synthesis of various different side chains. Hydrolysis via chemical reaction sequences was tedious requiring large amounts of toxic chemicals, and they were cost intensive. Enzymatic hydrolysis using penicillin amidase represented a much more elegant route. The basis for such a solution was the development of techniques for enzyme immobilization, a highly difficult task with respect to industrial application. Two pioneer groups started to develop solutions to this problem in the late 1960s and 1970s: that of Günter Schmidt-Kastner at Bayer AG (Germany) and that of Malcolm Lilly of Imperial College London. Here, one example of this development, that at Bayer, will be presented in more detail since it illustrates well the achievement of a solution to the problems of industrial application of enzymatic processes, notably development of an immobilization method for penicillin amidase suitable for scale up to application in industrial reactors under economic conditions. A range of bottlenecks and technical problems of large-scale application had to be overcome. Data giving an inside view of this pioneer achievement in the early phase of the new field of biocatalysis are presented. The development finally resulted in a highly innovative and commercially important enzymatic process to produce 6-APA that created a new antibiotics industry and that opened the way for the establishment of over 100 industrial processes with immobilized biocatalysts worldwide today.

To avoid isolation and purification of the intermediate 6-aminopenicillanic acid (6-APA), a two-enzyme two-step cascade synthesis of ampicillin from penicillin G was established. In purely aqueous medium, penicillin G hydrolysis and ampicillin synthesis were catalyzed by immobilized wild-type and mutagenized penicillin G acylases from Alcaligenes faecalis (Af PGA), respectively (Fig. 1). The βF24 G mutant Af PGA (the 24th Phenylalanine of the β-subunit was replaced by Glycine) was employed for its superior performance in enzymatic synthesis of ampicillin. By optimizing the reaction conditions, including enzyme loading, temperature, initial pH and D-PGME/6-APA ratio, the conversion of the second step of ampicillin synthesis reached approximately 90% in 240 min and less than 1.7 mole D-PGME were required to produce 1 mole ampicillin. Overall, in a 285 min continuous two-step procedure, an ampicillin yield of 87% was achieved, demonstrating the possibility of improving the cascade synthesis of ampicillin by mutagenized PGA, providing an economically efficient and environmentally benign procedure for semi-synthetic penicillins antibiotics synthesis., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The antibiotic acylases belonging to the N-terminal nucleophile hydrolase superfamily are key enzymes for the industrial production of antibiotic drugs. Cephalosporin acylase (CA) and penicillin G acylase (PGA) are two of the most intensively studied enzymes that catalyze the deacylation of β-lactam antibiotics. On the other hand, aculeacin A acylase (AAC) is known to be an alternative acylase class catalyzing the deacylation of echinocandin or cyclic lipopeptide antibiotic compounds, but its structural and enzymatic properties remain to be explored. In the present study, 3D homology models of AAC were constructed, and docking simulation with substrate ligands was performed for AAC, as well as for CA and PGA. The docking models of AAC with aculeacin A suggest that AAC has the deep narrow binding pocket for the long-chain fatty acyl group of the echinocandin molecule. To confirm this, CA mutants have been designed to form the binding pocket for the long acyl chain. Experimentally synthesized mutant enzymes exhibited lower enzymatic activity for cephalosporin but higher activity for aculeacin A, in comparison with the wild-type enzyme. The present results have clarified the difference in mechanisms of substrate selection between the β-lactam and echinocandin acylases and demonstrate the usefulness of the computational approaches for engineering the enzymatic properties of antibiotic acylases., (© The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.)

Penicillin V acylases (PVA) catalyze the deacylation of the beta-lactam antibiotic phenoxymethylpenicillin (Pen V). They are members of the Ntn hydrolase family and possess an N-terminal cysteine as the main catalytic nucleophile residue. They form the evolutionarily related cholylglycine hydrolase (CGH) group which includes bile salt hydrolases (BSH) responsible for bile deconjugation. Even though a few PVA and BSH structures have been reported, no structure of a functional PVA from Gram-negative bacteria is available. Here, we report the crystal structure of a highly active PVA from Gram-negative Pectobacterium atrosepticum (PaPVA) at 2.5Å resolution. Structural comparison with PVAs from Gram-positive bacteria revealed that PaPVA had a distinctive tetrameric structure and active site organization. In addition, mutagenesis of key active site residues and biochemical characterization of the resultant variants elucidated the role of these residues in substrate binding and catalysis. The importance of residue Trp23 and Trp87 side chains in binding and correct positioning of Pen V by PVAs was confirmed using mutagenesis and substrate docking with a 15ns molecular dynamics simulation. These results establish the unique nature of Gram-negative CGHs and necessitate further research about their substrate spectrum., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Penicillin acylases are enzymes employed by the pharmaceutical industry for the manufacture of semi-synthetic penicillins. There is a continuous demand for thermostable and alkalophilic enzymes in such applications. We have carried out a computational analysis of known penicillin G acylases (PGAs) in terms of their thermostable nature using various protein-stabilizing factors. While the presence of disulfide bridges was considered initially to screen putative thermostable PGAs from the database, various other factors such as high arginine to lysine ratio, less content of thermolabile amino acids, presence of proline in β-turns, more number of ion-pair and other non-bonded interactions were also considered for comparison. A modified consensus approach designed could further identify stabilizing residue positions by site-specific comparison between mesostable and thermostable PGAs. A most likely thermostable enzyme identified from the analysis was PGA from Paracoccus denitrificans (PdPGA). This was cloned, expressed and tested for its thermostable nature using biochemical and biophysical experiments. The consensus site-specific sequence-based approach predicted PdPGA to be more thermostable than Escherichia coli PGA, but not as thermostable as the PGA from Achromobacter xylosoxidans. Experimental data showed that PdPGA was comparatively less thermostable than Achromobacter xylosoxidans PGA, although thermostability factors favored a much higher stability. Despite being mesostable, PdPGA being active and stable at alkaline pH is an advantage. Finally, several residue positions could be identified in PdPGA, which upon mutation selectively could improve the thermostability of the enzyme.

Protease-triggered CO-releasing molecules (CORMs) were developed. The viability of the approach was demonstrated through the synthesis of compounds consisting of an η(4) -oxydiene-Fe(CO)3 moiety connected to a penicillin G amidase (PGA)-cleavable unit through a self-immolative linker. The rate of PGA-induced hydrolysis was investigated by HPLC analysis and the subsequent CO release was quantitatively assessed through headspace gas chromatography. In an in vitro assay with human endothelial cells, typical biological effects of CO, that is, inhibition of the inflammatory response and the induction of heme oxygenase-1 expression, were observed only upon co-administration of the CORM and PGA. This work forms a promising basis for the future development of protease-specific CORMs for potential medicinal applications., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Penicillin acylases are industrially important enzymes for the production of 6-APA, which is used extensively in the synthesis of secondary antibiotics. The enzyme translates into an inactive single chain precursor that subsequently gets processed by the removal of a spacer peptide connecting the chains of the mature active heterodimer. We have cloned the penicillin G acylase from Kluyvera citrophila (KcPGA) and prepared two mutants by site-directed mutagenesis. Replacement of N-terminal serine of the β-subunit with cysteine (Serβ1Cys) resulted in a fully processed but inactive enzyme. The second mutant in which this serine is replaced by glycine (Serβ1Gly) remained in the unprocessed and inactive form. The crystals of both mutants belonged to space group P1 with four molecules in the asymmetric unit. The three-dimensional structures of these mutants were refined at resolutions 2.8 and 2.5 Å, respectively. Comparison of these structures with similar structures of Escherichia coli PGA (EcPGA) revealed various conformational changes that lead to autocatalytic processing and consequent removal of the spacer peptide. The large displacements of residues such as Arg168 and Arg477 toward the N-terminal cleavage site of the spacer peptide or the conformational changes of Arg145 and Phe146 near the active site in these structures suggested probable steps in the processing dynamics. A comparison between the structures of the processed Serβ1Cys mutant and that of the processed form of EcPGA showed conformational differences in residues Argα145, Pheα146, and Pheβ24 at the substrate binding pocket. Three conformational transitions of Argα145 and Pheα146 residues were seen when processed and unprocessed forms of KcPGA were compared with the substrate bound structure of EcPGA. Structure mediation in activity difference between KcPGA and EcPGA toward acyl homoserine lactone (AHL) is elucidated., (© 2015 The Protein Society.)

An enzyme of cephalosporin-acid synthetase produced by the E. coli strain VKPM B-10182 has specificity for the synthesis of β-lactam antibiotics of the cephalosporin acids class (cefazolin, cefalotin, cefezole etc.). A comparison of the previously determined genomic sequence of E. coli VKPM B-10182 with a genome of the parent E. coli strain ATCC 9637 was performed. Multiple mutations indicating the long selection history of the strain were detected, including mutations in the genes of RNase and β-lactamases that could enhance the level of enzyme synthesis and reduce the degree of degradation of the synthesized cephalosporin acids. The CASA gene--a direct homolog of the penicillin G-acylase gene--was identified by bioinformatics methods. The homology of the gene was confirmed by gene cloning and the expression and determination of its enzymatic activity in the reaction of cefazolin synthesis. The CASA gene was isolated and cloned into the original expression vector, resulting in an effective E. coli BL2l(DE3) pMD0107 strain producing CASA.

There is an increasing demand for the development of sensitive enzymatic assays compatible with droplet-based microfluidics. Here we describe an original strategy, activity-fed translation (AFT), based on the coupling of enzymatic activity to in vitro translation of a fluorescent protein. We show that methionine release upon the hydrolysis of phenylacetylmethionine by penicillin acylase enabled in vitro expression of green fluorescent protein. An autocatalytic setup where both proteins are expressed makes the assay highly sensitive, as fluorescence was detected in droplets containing single PAC genes. Adding a PCR step in the droplets prior to the assay increased the sensitivity further. The strategy is potentially applicable for any activity that can be coupled to the production of an amino acid, and as the microdroplet volume is small the use of costly reagents such as in vitro expression mixtures is not limiting for high-throughput screening projects., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Semi-synthetic β-lactam antibiotics (SSBAs) are one of the most important antibiotic families in the world market. Their enzymatic synthesis can be catalyzed by penicillin G acylases (PGAs). In this study, to improve enzymatic synthesis of ampicillin, site-saturating mutagenesis was performed on three conserved amino acid residues: βF24, αR146, and αF147 of thermo-stable penicillin G acylase from Alcaligenes faecalis (Af PGA). Four mutants βF24G, βF24A, βF24S, and βF24P were recovered by screening the mutant bank. Kinetic analysis of them showed up to 800-fold increased kcat/Km value for activated acyl donor D-phenylglycine methyl ester (D-PGME). When βF24G was used for ampicillin synthesis under kinetic control at industrially relevant conditions, 95% of nucleophile 6-aminopenicillanic acid (6-APA) was converted to ampicillin in aqueous medium at room temperature while 12% process time is needed to reach maximum product accumulation at 25% enzyme concentration compared with the wild-type Af PGA. Consequently, process productivity of enzymatic synthesis of ampicillin catalyzed by Af PGA was improved by more than 130 times, which indicated an enzyme viable for efficient SSBAs synthesis., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Penicillin-binding protein 5 (PBP5), a dd-carboxypeptidase, maintains cell shape and intrinsic beta-lactam resistance in E. coli. A strain lacking PBP5 loses intrinsic beta-lactam resistance and simultaneous lack of two other PBPs results in aberrantly shaped cells. PBP5 expression in trans complements the shape and restores the lost beta-lactam resistance. PBP5 has an 'Ω-loop'-like region similar to that in class A beta-lactamases. It was previously predicted that Leu182 present in the 'Ω-like' loop of PBP5 corresponds to Glu166 in PER-1 beta-lactamase. Here, we studied the physiological and biochemical effects of the Leu182Glu mutation in PBP5. Upon overexpression in septuple PBP mutants, ~75 % of cells were abnormally shaped and intrinsic beta-lactam resistance maintenance was partially lost. Biochemically, the purified soluble mutated PBP5 (smPBP5) retained low acylation ability for penicillin. The turnover number of smPBP5 for artificial and peptidoglycan mimetic substrates was ~10-fold less than that of the wild-type. Superimposition of the active-site residues of smPBP5 on PBP5 revealed that perturbation in the orientating key residues may explain the low turnover numbers. Therefore, we establish the involvement of Leu182 in maintaining the physiological and biochemical behaviour of E. coli PBP5., (© 2015 The Authors.)

In this work, cephalosporin C acylase (CA), a heterodimeric enzyme of industrial potential in direct hydrolysis of cephalosporin C (CPC) to 7-aminocephalosporanic acid (7-ACA), was covalently immobilized on the aminated support LX1000-HA (HA) with two different protocols. The stability of CA adsorbed onto the HA support followed by crosslinking with glutaraldehyde (HA-CA-glut) was better than that of the CA covalently immobilized on the glutaraldehyde preactivated HA support (HA-glut-CA). The thermostabilization factors (compared with the free enzyme) of these two immobilized enzymes were 11.2-fold and 2.2-fold, respectively. In order to improve the stability of HA-CA-glut, a novel strategy based on postimmobilization modifying with aminated molecules was developed to take advantage of the glutaraldehyde moieties left on the enzyme and support. The macromolecules, such as polyethyleneimine (PEI) and chitosan, had larger effects than small molecules on the thermal stability of the immobilized enzyme perhaps due to crosslinking of the enzymes and support with each other. The quaternary structure of the CA could be much stabilized by this novel approach including physical adsorption on aminated support, glutaraldehyde treatment, and macromolecule modification. The HA-CA-glut-PEI20000 (the HA-CA-glut postmodified with PEI Mw = 20,000) had a thermostabilization factor of 20-fold, and its substrate affinity (Km = 14.3 mM) was better than that of HA-CA-glut (Km = 33.4 mM). The half-life of the immobilized enzymes HA-CA-glut-PEI20000 under the CPC-catalyzing conditions could reach 28 cycles, a higher value than that of HA-CA-glut (21 cycles)., (© 2015 American Institute of Chemical Engineers.)

The pva gene from Streptomyces lavendulae ATCC 13664, encoding a novel penicillin V acylase (SlPVA), has been isolated and characterized. The gene encodes an inactive precursor protein containing a secretion signal peptide that is activated by two internal autoproteolytic cleavages that release a 25-amino-acid linker peptide and two large domains of 18.79 kDa (alpha-subunit) and 60.09 kDA (beta-subunit). Based on sequence alignments and the three-dimensional model of SlPVA, the enzyme contains a hydrophobicpocket involved in catalytic activity, including Serbeta1, Hisbeta23, Valbeta70, and Asnbeta272, which were confirmed by site-directed mutagenesis studies. The heterologous expression of pva in S. lividans led to the production of an extracellularly homogeneous heterodimeric enzyme at a 5-fold higher concentration (959 IU/liter) than in the original host and in a considerably shorter time. According to the catalytic properties of SlPVA, the enzyme must be classified as a new member of the Ntn-hydrolase superfamily, which belongs to a novel subfamily of acylases that recognize substrates with long hydrophobic acyl chains and have biotechnological applications in semisynthetic antifungal production.

Cephalosporin C acylase (CCA), an important industrial enzyme for the production of 7-aminocephalosporanic acid, has very limited and scattered surface lysine residues. A mutant of cephalosporin C acylase (mCCA) has been designed to fuse a poly-lysine tag to the C-terminal of the β-subunit, which is far away from the active site. The free mCCA showed a near equal specific activity with the wild-type CCA, while a much higher activity recovery was obtained for the mCCA than its wild-type counterpart after immobilization on glyoxyl agarose support (73.3 versus 53.3 %). The mCCA's oriented immobilization enables it to obtain a higher substrate affinity and even a higher thermal stability than the wild-type enzyme. The improvement of stability might be attributed to the multipoint covalent attachment by the oriented enzyme immobilization via the adhered poly-lysine tag, which prevents the dissociation of the β-subunit of CCA from the support.